"./operations.test -test.v -test.timeout 1h0m0s -remote TestS3Wasabi: -verbose" - Starting (try 1/5) 2025/11/29 02:21:56 DEBUG : Creating backend with remote "TestS3Wasabi:rclone-test-yexofaj6qosa" 2025/11/29 02:21:56 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2025/11/29 02:21:56 DEBUG : Creating backend with remote "/tmp/rclone3326563316" === RUN TestDoMultiThreadCopy --- PASS: TestDoMultiThreadCopy (0.00s) === RUN TestMultithreadCalculateNumChunks === RUN TestMultithreadCalculateNumChunks/{size:1_chunkSize:65536_wantNumChunks:1} === RUN TestMultithreadCalculateNumChunks/{size:1048576_chunkSize:1_wantNumChunks:1048576} === RUN TestMultithreadCalculateNumChunks/{size:1048576_chunkSize:2_wantNumChunks:524288} === RUN TestMultithreadCalculateNumChunks/{size:1048577_chunkSize:2_wantNumChunks:524289} === RUN TestMultithreadCalculateNumChunks/{size:1048575_chunkSize:2_wantNumChunks:524288} --- PASS: TestMultithreadCalculateNumChunks (0.00s) --- PASS: TestMultithreadCalculateNumChunks/{size:1_chunkSize:65536_wantNumChunks:1} (0.00s) --- PASS: TestMultithreadCalculateNumChunks/{size:1048576_chunkSize:1_wantNumChunks:1048576} (0.00s) --- PASS: TestMultithreadCalculateNumChunks/{size:1048576_chunkSize:2_wantNumChunks:524288} (0.00s) --- PASS: TestMultithreadCalculateNumChunks/{size:1048577_chunkSize:2_wantNumChunks:524289} (0.00s) --- PASS: TestMultithreadCalculateNumChunks/{size:1048575_chunkSize:2_wantNumChunks:524288} (0.00s) === RUN TestMultithreadCopy run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" 2025/11/29 02:21:57 INFO : S3 bucket rclone-test-yexofaj6qosa: Bucket "rclone-test-yexofaj6qosa" created with ACL "" 2025/11/29 02:21:57 DEBUG : chunksize-probe: open chunk writer: started multipart upload: kufTt5axwkgXekKRWkhbj6p4m_OEsj4-Z_qFFHWIbTQVw7eUsRMD8tlM2KEbK6xA_F15Jfws_oKk6XY2OX8eOMzZWkfgzZAfn4Lt5v3xfBcaCu8SOsIBCLzu6A6gV3_u 2025/11/29 02:21:57 DEBUG : chunksize-probe: multipart upload "kufTt5axwkgXekKRWkhbj6p4m_OEsj4-Z_qFFHWIbTQVw7eUsRMD8tlM2KEbK6xA_F15Jfws_oKk6XY2OX8eOMzZWkfgzZAfn4Lt5v3xfBcaCu8SOsIBCLzu6A6gV3_u" aborted === RUN TestMultithreadCopy/upload=false,size=10485759,streams=2 2025/11/29 02:21:59 DEBUG : test-multithread-copy-false-10485759-2: multi-thread copy: disabling buffering because destination uses OpenWriterAt 2025/11/29 02:21:59 DEBUG : test-multithread-copy-false-10485759-2: multi-thread copy: write buffer set to 131072 2025/11/29 02:21:59 DEBUG : test-multithread-copy-false-10485759-2: multi-thread copy: chunk size 64Mi was bigger than source file size 10.000Mi 2025/11/29 02:21:59 DEBUG : test-multithread-copy-false-10485759-2: multi-thread copy: using backend concurrency of 4 instead of --multi-thread-streams 2 2025/11/29 02:21:59 DEBUG : test-multithread-copy-false-10485759-2: multi-thread copy: number of streams 4 was bigger than number of chunks 1 2025/11/29 02:21:59 DEBUG : test-multithread-copy-false-10485759-2: Starting multi-thread copy with 1 chunks of size 10.000Mi with 1 parallel streams 2025/11/29 02:21:59 DEBUG : test-multithread-copy-false-10485759-2: multi-thread copy: chunk 1/1 (0-10485759) size 10.000Mi starting 2025/11/29 02:22:00 DEBUG : test-multithread-copy-false-10485759-2: writing chunk 0 2025/11/29 02:22:01 DEBUG : test-multithread-copy-false-10485759-2: multi-thread copy: chunk 1/1 (0-10485759) size 10.000Mi finished 2025/11/29 02:22:01 DEBUG : test-multithread-copy-false-10485759-2: Finished multi-thread copy with 1 parts of size 10.000Mi === RUN TestMultithreadCopy/upload=false,size=10485760,streams=2 2025/11/29 02:22:04 DEBUG : test-multithread-copy-false-10485760-2: multi-thread copy: disabling buffering because destination uses OpenWriterAt 2025/11/29 02:22:04 DEBUG : test-multithread-copy-false-10485760-2: multi-thread copy: write buffer set to 131072 2025/11/29 02:22:04 DEBUG : test-multithread-copy-false-10485760-2: multi-thread copy: chunk size 64Mi was bigger than source file size 10Mi 2025/11/29 02:22:04 DEBUG : test-multithread-copy-false-10485760-2: multi-thread copy: using backend concurrency of 4 instead of --multi-thread-streams 2 2025/11/29 02:22:04 DEBUG : test-multithread-copy-false-10485760-2: multi-thread copy: number of streams 4 was bigger than number of chunks 1 2025/11/29 02:22:04 DEBUG : test-multithread-copy-false-10485760-2: Starting multi-thread copy with 1 chunks of size 10Mi with 1 parallel streams 2025/11/29 02:22:04 DEBUG : test-multithread-copy-false-10485760-2: multi-thread copy: chunk 1/1 (0-10485760) size 10Mi starting 2025/11/29 02:22:04 DEBUG : test-multithread-copy-false-10485760-2: writing chunk 0 2025/11/29 02:22:05 DEBUG : test-multithread-copy-false-10485760-2: multi-thread copy: chunk 1/1 (0-10485760) size 10Mi finished 2025/11/29 02:22:05 DEBUG : test-multithread-copy-false-10485760-2: Finished multi-thread copy with 1 parts of size 10Mi === RUN TestMultithreadCopy/upload=false,size=10485761,streams=2 2025/11/29 02:22:07 DEBUG : test-multithread-copy-false-10485761-2: multi-thread copy: disabling buffering because destination uses OpenWriterAt 2025/11/29 02:22:07 DEBUG : test-multithread-copy-false-10485761-2: multi-thread copy: write buffer set to 131072 2025/11/29 02:22:07 DEBUG : test-multithread-copy-false-10485761-2: multi-thread copy: chunk size 64Mi was bigger than source file size 10.000Mi 2025/11/29 02:22:07 DEBUG : test-multithread-copy-false-10485761-2: multi-thread copy: using backend concurrency of 4 instead of --multi-thread-streams 2 2025/11/29 02:22:07 DEBUG : test-multithread-copy-false-10485761-2: multi-thread copy: number of streams 4 was bigger than number of chunks 1 2025/11/29 02:22:07 DEBUG : test-multithread-copy-false-10485761-2: Starting multi-thread copy with 1 chunks of size 10.000Mi with 1 parallel streams 2025/11/29 02:22:07 DEBUG : test-multithread-copy-false-10485761-2: multi-thread copy: chunk 1/1 (0-10485761) size 10.000Mi starting 2025/11/29 02:22:07 DEBUG : test-multithread-copy-false-10485761-2: writing chunk 0 2025/11/29 02:22:08 DEBUG : test-multithread-copy-false-10485761-2: multi-thread copy: chunk 1/1 (0-10485761) size 10.000Mi finished 2025/11/29 02:22:08 DEBUG : test-multithread-copy-false-10485761-2: Finished multi-thread copy with 1 parts of size 10.000Mi === RUN TestMultithreadCopy/upload=true,size=10485759,streams=2 2025/11/29 02:22:10 DEBUG : test-multithread-copy-true-10485759-2: multi-thread copy: disabling buffering because source is local disk 2025/11/29 02:22:10 DEBUG : test-multithread-copy-true-10485759-2: open chunk writer: started multipart upload: 9pSNpmmRJ_3fay4jnB5hBjhDYhDGEeP4mhI3j4R__Ti0m3qyhq67FaoZWxuIDf9l4JqSo3dI7ByJcavyMGKthyU_5drKk27FfvNlQW5Vdk0es-TJtz5GnmnKqh7yeX-H 2025/11/29 02:22:10 DEBUG : test-multithread-copy-true-10485759-2: multi-thread copy: using backend concurrency of 4 instead of --multi-thread-streams 2 2025/11/29 02:22:10 DEBUG : test-multithread-copy-true-10485759-2: multi-thread copy: number of streams 4 was bigger than number of chunks 2 2025/11/29 02:22:10 DEBUG : test-multithread-copy-true-10485759-2: Starting multi-thread copy with 2 chunks of size 5Mi with 2 parallel streams 2025/11/29 02:22:10 DEBUG : test-multithread-copy-true-10485759-2: multi-thread copy: chunk 2/2 (5242880-10485759) size 5.000Mi starting 2025/11/29 02:22:10 DEBUG : test-multithread-copy-true-10485759-2: multi-thread copy: chunk 1/2 (0-5242880) size 5Mi starting 2025/11/29 02:22:10 DEBUG : test-multithread-copy-true-10485759-2: Seek from 5242880 to 0 2025/11/29 02:22:11 DEBUG : test-multithread-copy-true-10485759-2: Seek from 5242879 to 0 2025/11/29 02:22:11 DEBUG : test-multithread-copy-true-10485759-2: multipart upload wrote chunk 1 with 5242880 bytes and etag "dc784ea9a941711d275f73a492a981e5" 2025/11/29 02:22:11 DEBUG : test-multithread-copy-true-10485759-2: multi-thread copy: chunk 1/2 (0-5242880) size 5Mi finished 2025/11/29 02:22:12 DEBUG : test-multithread-copy-true-10485759-2: multipart upload wrote chunk 2 with 5242879 bytes and etag "94e4266dcf5bee241c3fc4919e70de23" 2025/11/29 02:22:12 DEBUG : test-multithread-copy-true-10485759-2: multi-thread copy: chunk 2/2 (5242880-10485759) size 5.000Mi finished 2025/11/29 02:22:12 DEBUG : test-multithread-copy-true-10485759-2: multipart upload "9pSNpmmRJ_3fay4jnB5hBjhDYhDGEeP4mhI3j4R__Ti0m3qyhq67FaoZWxuIDf9l4JqSo3dI7ByJcavyMGKthyU_5drKk27FfvNlQW5Vdk0es-TJtz5GnmnKqh7yeX-H" finished 2025/11/29 02:22:12 DEBUG : test-multithread-copy-true-10485759-2: Finished multi-thread copy with 2 parts of size 5Mi === RUN TestMultithreadCopy/upload=true,size=10485760,streams=2 2025/11/29 02:22:14 DEBUG : test-multithread-copy-true-10485760-2: multi-thread copy: disabling buffering because source is local disk 2025/11/29 02:22:14 DEBUG : test-multithread-copy-true-10485760-2: open chunk writer: started multipart upload: LRTb_4NQefrFQ32e5O3rFrYCvd38KknMaU4xCNdWkd5HvI_ZsjP_-pxp11yrNW7xFIKVwLtdB8rVDg2yxlqdnIVSJonx317DyjvPtaCmFchWrKJwHZbEYCDjo0OJfS40 2025/11/29 02:22:14 DEBUG : test-multithread-copy-true-10485760-2: multi-thread copy: using backend concurrency of 4 instead of --multi-thread-streams 2 2025/11/29 02:22:14 DEBUG : test-multithread-copy-true-10485760-2: multi-thread copy: number of streams 4 was bigger than number of chunks 2 2025/11/29 02:22:14 DEBUG : test-multithread-copy-true-10485760-2: Starting multi-thread copy with 2 chunks of size 5Mi with 2 parallel streams 2025/11/29 02:22:14 DEBUG : test-multithread-copy-true-10485760-2: multi-thread copy: chunk 2/2 (5242880-10485760) size 5Mi starting 2025/11/29 02:22:14 DEBUG : test-multithread-copy-true-10485760-2: multi-thread copy: chunk 1/2 (0-5242880) size 5Mi starting 2025/11/29 02:22:14 DEBUG : test-multithread-copy-true-10485760-2: Seek from 5242880 to 0 2025/11/29 02:22:14 DEBUG : test-multithread-copy-true-10485760-2: Seek from 5242880 to 0 2025/11/29 02:22:15 DEBUG : test-multithread-copy-true-10485760-2: multipart upload wrote chunk 1 with 5242880 bytes and etag "6d51f276be3599936750a56e166f1f5b" 2025/11/29 02:22:15 DEBUG : test-multithread-copy-true-10485760-2: multi-thread copy: chunk 1/2 (0-5242880) size 5Mi finished 2025/11/29 02:22:15 DEBUG : test-multithread-copy-true-10485760-2: multipart upload wrote chunk 2 with 5242880 bytes and etag "507e12262874a4bf5ec69969e605ffde" 2025/11/29 02:22:15 DEBUG : test-multithread-copy-true-10485760-2: multi-thread copy: chunk 2/2 (5242880-10485760) size 5Mi finished 2025/11/29 02:22:16 DEBUG : test-multithread-copy-true-10485760-2: multipart upload "LRTb_4NQefrFQ32e5O3rFrYCvd38KknMaU4xCNdWkd5HvI_ZsjP_-pxp11yrNW7xFIKVwLtdB8rVDg2yxlqdnIVSJonx317DyjvPtaCmFchWrKJwHZbEYCDjo0OJfS40" finished 2025/11/29 02:22:16 DEBUG : test-multithread-copy-true-10485760-2: Finished multi-thread copy with 2 parts of size 5Mi === RUN TestMultithreadCopy/upload=true,size=10485761,streams=2 2025/11/29 02:22:18 DEBUG : test-multithread-copy-true-10485761-2: multi-thread copy: disabling buffering because source is local disk 2025/11/29 02:22:18 DEBUG : test-multithread-copy-true-10485761-2: open chunk writer: started multipart upload: 4eO9B6Vk0NtV2G85O0jcHRlN6KLmG_hqNOVFHLEL1uE-dzKzsxVfJ8M_9mm1ZiAjrG5VmgwVshUz-GKfL1pP39T7ugWONMswhkqe0PZAJqu1bm_B35IuP1fO3jZwMgH4 2025/11/29 02:22:18 DEBUG : test-multithread-copy-true-10485761-2: multi-thread copy: using backend concurrency of 4 instead of --multi-thread-streams 2 2025/11/29 02:22:18 DEBUG : test-multithread-copy-true-10485761-2: multi-thread copy: number of streams 4 was bigger than number of chunks 3 2025/11/29 02:22:18 DEBUG : test-multithread-copy-true-10485761-2: Starting multi-thread copy with 3 chunks of size 5Mi with 3 parallel streams 2025/11/29 02:22:18 DEBUG : test-multithread-copy-true-10485761-2: multi-thread copy: chunk 3/3 (10485760-10485761) size 1 starting 2025/11/29 02:22:18 DEBUG : test-multithread-copy-true-10485761-2: multi-thread copy: chunk 1/3 (0-5242880) size 5Mi starting 2025/11/29 02:22:18 DEBUG : test-multithread-copy-true-10485761-2: multi-thread copy: chunk 2/3 (5242880-10485760) size 5Mi starting 2025/11/29 02:22:18 DEBUG : test-multithread-copy-true-10485761-2: Seek from 1 to 0 2025/11/29 02:22:18 DEBUG : test-multithread-copy-true-10485761-2: Seek from 5242880 to 0 2025/11/29 02:22:18 DEBUG : test-multithread-copy-true-10485761-2: multipart upload wrote chunk 3 with 1 bytes and etag "2db95e8e1a9267b7a1188556b2013b33" 2025/11/29 02:22:18 DEBUG : test-multithread-copy-true-10485761-2: multi-thread copy: chunk 3/3 (10485760-10485761) size 1 finished 2025/11/29 02:22:18 DEBUG : test-multithread-copy-true-10485761-2: Seek from 5242880 to 0 2025/11/29 02:22:19 DEBUG : test-multithread-copy-true-10485761-2: multipart upload wrote chunk 1 with 5242880 bytes and etag "5eff358dc9f987c6fff5752556762fac" 2025/11/29 02:22:19 DEBUG : test-multithread-copy-true-10485761-2: multi-thread copy: chunk 1/3 (0-5242880) size 5Mi finished 2025/11/29 02:22:19 DEBUG : test-multithread-copy-true-10485761-2: multipart upload wrote chunk 2 with 5242880 bytes and etag "4ee2ec0e9b4151df5dbd6322be0d07a8" 2025/11/29 02:22:19 DEBUG : test-multithread-copy-true-10485761-2: multi-thread copy: chunk 2/3 (5242880-10485760) size 5Mi finished 2025/11/29 02:22:19 DEBUG : test-multithread-copy-true-10485761-2: multipart upload "4eO9B6Vk0NtV2G85O0jcHRlN6KLmG_hqNOVFHLEL1uE-dzKzsxVfJ8M_9mm1ZiAjrG5VmgwVshUz-GKfL1pP39T7ugWONMswhkqe0PZAJqu1bm_B35IuP1fO3jZwMgH4" finished 2025/11/29 02:22:19 DEBUG : test-multithread-copy-true-10485761-2: Finished multi-thread copy with 3 parts of size 5Mi --- PASS: TestMultithreadCopy (24.26s) --- PASS: TestMultithreadCopy/upload=false,size=10485759,streams=2 (4.39s) --- PASS: TestMultithreadCopy/upload=false,size=10485760,streams=2 (3.84s) --- PASS: TestMultithreadCopy/upload=false,size=10485761,streams=2 (3.52s) --- PASS: TestMultithreadCopy/upload=true,size=10485759,streams=2 (3.95s) --- PASS: TestMultithreadCopy/upload=true,size=10485760,streams=2 (3.69s) --- PASS: TestMultithreadCopy/upload=true,size=10485761,streams=2 (3.54s) === RUN TestMultithreadCopyAbort run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" 2025/11/29 02:22:21 DEBUG : chunksize-probe: open chunk writer: started multipart upload: MslCpsCTkRTvZuAqDPFTzeIgMx0JckOkCIJ5Q50mvkcdrpt4nmjDGsJbgW9cOXrHH0tiQrk5dlRkpHSoMgV45VCBXKy44-YMEXKuEpCsU3LdNl-9_jibvhLEihGjaZpF 2025/11/29 02:22:21 DEBUG : chunksize-probe: multipart upload "MslCpsCTkRTvZuAqDPFTzeIgMx0JckOkCIJ5Q50mvkcdrpt4nmjDGsJbgW9cOXrHH0tiQrk5dlRkpHSoMgV45VCBXKy44-YMEXKuEpCsU3LdNl-9_jibvhLEihGjaZpF" aborted 2025/11/29 02:22:22 DEBUG : test-multithread-abort: multi-thread copy: disabling buffering because source is local disk 2025/11/29 02:22:22 DEBUG : test-multithread-abort: open chunk writer: started multipart upload: 2dsgH1GgzOxjv4WHoQq91ay63fmSejS5GbnIxAjj_QNxAGi55ISAypd1bqwy8Fonv-uV2im8SstUpyOcYpRvXcBO_0kz1qapWkATNXhi1km00S5_7kbdqi6QJWv1HRvL 2025/11/29 02:22:22 DEBUG : test-multithread-abort: multi-thread copy: using backend concurrency of 4 instead of --multi-thread-streams 1 2025/11/29 02:22:22 DEBUG : test-multithread-abort: multi-thread copy: number of streams 4 was bigger than number of chunks 3 2025/11/29 02:22:22 DEBUG : test-multithread-abort: Starting multi-thread copy with 3 chunks of size 5Mi with 3 parallel streams 2025/11/29 02:22:22 DEBUG : test-multithread-abort: multi-thread copy: chunk 3/3 (10485760-10485761) size 1 starting 2025/11/29 02:22:22 DEBUG : Open with options = [RangeOption(10485760,10485760)] 2025/11/29 02:22:22 DEBUG : test-multithread-abort: multi-thread copy: chunk 1/3 (0-5242880) size 5Mi starting 2025/11/29 02:22:22 DEBUG : Open with options = [RangeOption(0,5242879)] 2025/11/29 02:22:22 DEBUG : test-multithread-abort: multi-thread copy: chunk 2/3 (5242880-10485760) size 5Mi starting 2025/11/29 02:22:22 DEBUG : Open with options = [RangeOption(5242880,10485759)] 2025/11/29 02:22:22 DEBUG : test-multithread-abort: Seek from 5242880 to 0 2025/11/29 02:22:22 DEBUG : Open with options = [RangeOption(0,5242879)] 2025/11/29 02:22:22 DEBUG : test-multithread-abort: Seek from 5242880 to 0 2025/11/29 02:22:22 DEBUG : Open with options = [RangeOption(5242880,10485759)] 2025/11/29 02:22:23 DEBUG : test-multithread-abort: multipart upload wrote chunk 1 with 5242880 bytes and etag "f145d752a7ded027de31b4e894f91239" 2025/11/29 02:22:23 DEBUG : test-multithread-abort: multi-thread copy: chunk 1/3 (0-5242880) size 5Mi finished 2025/11/29 02:22:23 DEBUG : test-multithread-abort: multipart upload wrote chunk 2 with 5242880 bytes and etag "a552158c02172b61dd4cc146bfc7a670" 2025/11/29 02:22:23 DEBUG : test-multithread-abort: multi-thread copy: chunk 2/3 (5242880-10485760) size 5Mi finished 2025/11/29 02:22:23 DEBUG : Returning error reader 2025/11/29 02:22:23 DEBUG : BOOM: simulated read failure 2025/11/29 02:22:23 DEBUG : test-multithread-abort: Reopening on read failure after offset 0 bytes: retry 1/10: BOOM: simulated read failure 2025/11/29 02:22:23 DEBUG : Open with options = [RangeOption(10485760,10485760)] 2025/11/29 02:22:24 DEBUG : Returning error reader 2025/11/29 02:22:24 DEBUG : BOOM: simulated read failure 2025/11/29 02:22:24 DEBUG : test-multithread-abort: Reopening on read failure after offset 0 bytes: retry 2/10: BOOM: simulated read failure 2025/11/29 02:22:24 DEBUG : Open with options = [RangeOption(10485760,10485760)] 2025/11/29 02:22:25 DEBUG : Returning error reader 2025/11/29 02:22:25 DEBUG : BOOM: simulated read failure 2025/11/29 02:22:25 DEBUG : test-multithread-abort: Reopening on read failure after offset 0 bytes: retry 3/10: BOOM: simulated read failure 2025/11/29 02:22:25 DEBUG : Open with options = [RangeOption(10485760,10485760)] 2025/11/29 02:22:26 DEBUG : Returning error reader 2025/11/29 02:22:26 DEBUG : BOOM: simulated read failure 2025/11/29 02:22:26 DEBUG : test-multithread-abort: Reopening on read failure after offset 0 bytes: retry 4/10: BOOM: simulated read failure 2025/11/29 02:22:26 DEBUG : Open with options = [RangeOption(10485760,10485760)] 2025/11/29 02:22:27 DEBUG : Returning error reader 2025/11/29 02:22:27 DEBUG : BOOM: simulated read failure 2025/11/29 02:22:27 DEBUG : test-multithread-abort: Reopening on read failure after offset 0 bytes: retry 5/10: BOOM: simulated read failure 2025/11/29 02:22:27 DEBUG : Open with options = [RangeOption(10485760,10485760)] 2025/11/29 02:22:28 DEBUG : Returning error reader 2025/11/29 02:22:28 DEBUG : BOOM: simulated read failure 2025/11/29 02:22:28 DEBUG : test-multithread-abort: Reopening on read failure after offset 0 bytes: retry 6/10: BOOM: simulated read failure 2025/11/29 02:22:28 DEBUG : Open with options = [RangeOption(10485760,10485760)] 2025/11/29 02:22:29 DEBUG : Returning error reader 2025/11/29 02:22:29 DEBUG : BOOM: simulated read failure 2025/11/29 02:22:29 DEBUG : test-multithread-abort: Reopening on read failure after offset 0 bytes: retry 7/10: BOOM: simulated read failure 2025/11/29 02:22:29 DEBUG : Open with options = [RangeOption(10485760,10485760)] 2025/11/29 02:22:30 DEBUG : Returning error reader 2025/11/29 02:22:30 DEBUG : BOOM: simulated read failure 2025/11/29 02:22:30 DEBUG : test-multithread-abort: Reopening on read failure after offset 0 bytes: retry 8/10: BOOM: simulated read failure 2025/11/29 02:22:30 DEBUG : Open with options = [RangeOption(10485760,10485760)] 2025/11/29 02:22:31 DEBUG : Returning error reader 2025/11/29 02:22:31 DEBUG : BOOM: simulated read failure 2025/11/29 02:22:31 DEBUG : test-multithread-abort: Reopening on read failure after offset 0 bytes: retry 9/10: BOOM: simulated read failure 2025/11/29 02:22:31 DEBUG : Open with options = [RangeOption(10485760,10485760)] 2025/11/29 02:22:32 DEBUG : Returning error reader 2025/11/29 02:22:32 DEBUG : BOOM: simulated read failure 2025/11/29 02:22:32 DEBUG : test-multithread-abort: Reopening on read failure after offset 0 bytes: retry 10/10: BOOM: simulated read failure 2025/11/29 02:22:32 DEBUG : test-multithread-abort: Reopen failed after offset 0 bytes read: failed to reopen: too many retries 2025/11/29 02:22:32 DEBUG : test-multithread-abort: multi-thread copy: chunk 3/3 failed: multi-thread copy: failed to write chunk: BOOM: simulated read failure 2025/11/29 02:22:32 DEBUG : test-multithread-abort: multi-thread copy: cancelling transfer on exit 2025/11/29 02:22:33 DEBUG : test-multithread-abort: multipart upload "2dsgH1GgzOxjv4WHoQq91ay63fmSejS5GbnIxAjj_QNxAGi55ISAypd1bqwy8Fonv-uV2im8SstUpyOcYpRvXcBO_0kz1qapWkATNXhi1km00S5_7kbdqi6QJWv1HRvL" aborted --- PASS: TestMultithreadCopyAbort (13.12s) === RUN TestSizeDiffers 2025/11/29 02:22:34 DEBUG : a: size = 0 OK 2025/11/29 02:22:34 DEBUG : a: size = 1 (memory) 2025/11/29 02:22:34 DEBUG : a: size = 2 (memory) --- PASS: TestSizeDiffers (0.00s) === RUN TestReOpen === RUN TestReOpen/Normal === RUN TestReOpen/Normal/Basics 2025/11/29 02:22:34 DEBUG : potato: Seek from 10 to 0 === RUN TestReOpen/Normal/ErrorAtStart === RUN TestReOpen/Normal/WithErrors 2025/11/29 02:22:34 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 1/10: test error 2025/11/29 02:22:34 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 2/10: test error 2025/11/29 02:22:34 DEBUG : potato: Reopening on read failure after offset 6 bytes: retry 3/10: test error === RUN TestReOpen/Normal/TooManyErrors 2025/11/29 02:22:34 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 1/3: test error 2025/11/29 02:22:34 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 2/3: test error 2025/11/29 02:22:34 DEBUG : potato: Reopening on read failure after offset 6 bytes: retry 3/3: test error 2025/11/29 02:22:34 DEBUG : potato: Reopen failed after offset 6 bytes read: failed to reopen: too many retries === RUN TestReOpen/Normal/ReadAt 2025/11/29 02:22:34 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 0/10: test error 2025/11/29 02:22:34 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 1/10: test error 2025/11/29 02:22:34 DEBUG : potato: Seek from 5 to 1 === RUN TestReOpen/Normal/Seek 2025/11/29 02:22:34 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 0/10: test error 2025/11/29 02:22:34 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 1/10: test error 2025/11/29 02:22:34 DEBUG : potato: Seek from 5 to 2 === RUN TestReOpen/Normal/AccountRead === RUN TestReOpen/Normal/AccountReadDelay 2025/11/29 02:22:34 DEBUG : potato: Seek from 10 to 0 2025/11/29 02:22:34 DEBUG : potato: Seek from 10 to 0 2025/11/29 02:22:34 DEBUG : potato: Seek from 10 to 0 === RUN TestReOpen/Normal/AccountReadError === RUN TestReOpen/WithRangeOption === RUN TestReOpen/WithRangeOption/Basics 2025/11/29 02:22:34 DEBUG : potato: Seek from 7 to 0 === RUN TestReOpen/WithRangeOption/ErrorAtStart === RUN TestReOpen/WithRangeOption/WithErrors 2025/11/29 02:22:34 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 1/10: test error 2025/11/29 02:22:34 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 2/10: test error 2025/11/29 02:22:34 DEBUG : potato: Reopening on read failure after offset 6 bytes: retry 3/10: test error === RUN TestReOpen/WithRangeOption/TooManyErrors 2025/11/29 02:22:34 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 1/3: test error 2025/11/29 02:22:34 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 2/3: test error 2025/11/29 02:22:34 DEBUG : potato: Reopening on read failure after offset 6 bytes: retry 3/3: test error 2025/11/29 02:22:34 DEBUG : potato: Reopen failed after offset 6 bytes read: failed to reopen: too many retries === RUN TestReOpen/WithRangeOption/ReadAt 2025/11/29 02:22:34 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 0/10: test error 2025/11/29 02:22:34 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 1/10: test error 2025/11/29 02:22:34 DEBUG : potato: Seek from 5 to 1 === RUN TestReOpen/WithRangeOption/Seek 2025/11/29 02:22:34 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 0/10: test error 2025/11/29 02:22:34 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 1/10: test error 2025/11/29 02:22:34 DEBUG : potato: Seek from 5 to 2 2025/11/29 02:22:34 DEBUG : potato: Seek from 7 to 4 === RUN TestReOpen/WithRangeOption/AccountRead === RUN TestReOpen/WithRangeOption/AccountReadDelay 2025/11/29 02:22:34 DEBUG : potato: Seek from 7 to 0 2025/11/29 02:22:34 DEBUG : potato: Seek from 7 to 0 2025/11/29 02:22:34 DEBUG : potato: Seek from 7 to 0 === RUN TestReOpen/WithRangeOption/AccountReadError === RUN TestReOpen/WithSeekOption === RUN TestReOpen/WithSeekOption/Basics 2025/11/29 02:22:34 DEBUG : potato: Seek from 8 to 0 === RUN TestReOpen/WithSeekOption/ErrorAtStart === RUN TestReOpen/WithSeekOption/WithErrors 2025/11/29 02:22:34 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 1/10: test error 2025/11/29 02:22:34 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 2/10: test error 2025/11/29 02:22:34 DEBUG : potato: Reopening on read failure after offset 6 bytes: retry 3/10: test error === RUN TestReOpen/WithSeekOption/TooManyErrors 2025/11/29 02:22:34 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 1/3: test error 2025/11/29 02:22:34 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 2/3: test error 2025/11/29 02:22:34 DEBUG : potato: Reopening on read failure after offset 6 bytes: retry 3/3: test error 2025/11/29 02:22:34 DEBUG : potato: Reopen failed after offset 6 bytes read: failed to reopen: too many retries === RUN TestReOpen/WithSeekOption/ReadAt 2025/11/29 02:22:34 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 0/10: test error 2025/11/29 02:22:34 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 1/10: test error 2025/11/29 02:22:34 DEBUG : potato: Seek from 5 to 1 === RUN TestReOpen/WithSeekOption/Seek 2025/11/29 02:22:34 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 0/10: test error 2025/11/29 02:22:34 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 1/10: test error 2025/11/29 02:22:34 DEBUG : potato: Seek from 5 to 2 2025/11/29 02:22:34 DEBUG : potato: Seek from 7 to 5 === RUN TestReOpen/WithSeekOption/AccountRead === RUN TestReOpen/WithSeekOption/AccountReadDelay 2025/11/29 02:22:34 DEBUG : potato: Seek from 8 to 0 2025/11/29 02:22:34 DEBUG : potato: Seek from 8 to 0 2025/11/29 02:22:34 DEBUG : potato: Seek from 8 to 0 === RUN TestReOpen/WithSeekOption/AccountReadError === RUN TestReOpen/UnknownSize === RUN TestReOpen/UnknownSize/Basics 2025/11/29 02:22:34 DEBUG : potato: Seek from 9 to 0 === RUN TestReOpen/UnknownSize/ErrorAtStart === RUN TestReOpen/UnknownSize/WithErrors 2025/11/29 02:22:34 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 1/10: test error 2025/11/29 02:22:34 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 2/10: test error 2025/11/29 02:22:34 DEBUG : potato: Reopening on read failure after offset 6 bytes: retry 3/10: test error === RUN TestReOpen/UnknownSize/TooManyErrors 2025/11/29 02:22:34 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 1/3: test error 2025/11/29 02:22:34 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 2/3: test error 2025/11/29 02:22:34 DEBUG : potato: Reopening on read failure after offset 6 bytes: retry 3/3: test error 2025/11/29 02:22:34 DEBUG : potato: Reopen failed after offset 6 bytes read: failed to reopen: too many retries === RUN TestReOpen/UnknownSize/ReadAt 2025/11/29 02:22:34 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 0/10: test error 2025/11/29 02:22:34 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 1/10: test error 2025/11/29 02:22:34 DEBUG : potato: Seek from 5 to 1 === RUN TestReOpen/UnknownSize/Seek 2025/11/29 02:22:34 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 0/10: test error 2025/11/29 02:22:34 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 1/10: test error 2025/11/29 02:22:34 DEBUG : potato: Seek from 5 to 2 2025/11/29 02:22:34 DEBUG : potato: Seek from 7 to 6 === RUN TestReOpen/UnknownSize/AccountRead === RUN TestReOpen/UnknownSize/AccountReadDelay 2025/11/29 02:22:34 DEBUG : potato: Seek from 9 to 0 2025/11/29 02:22:34 DEBUG : potato: Seek from 9 to 0 2025/11/29 02:22:34 DEBUG : potato: Seek from 9 to 0 === RUN TestReOpen/UnknownSize/AccountReadError --- PASS: TestReOpen (0.00s) --- PASS: TestReOpen/Normal (0.00s) --- PASS: TestReOpen/Normal/Basics (0.00s) --- PASS: TestReOpen/Normal/ErrorAtStart (0.00s) --- PASS: TestReOpen/Normal/WithErrors (0.00s) --- PASS: TestReOpen/Normal/TooManyErrors (0.00s) --- PASS: TestReOpen/Normal/ReadAt (0.00s) --- PASS: TestReOpen/Normal/Seek (0.00s) --- PASS: TestReOpen/Normal/AccountRead (0.00s) --- PASS: TestReOpen/Normal/AccountReadDelay (0.00s) --- PASS: TestReOpen/Normal/AccountReadError (0.00s) --- PASS: TestReOpen/WithRangeOption (0.00s) --- PASS: TestReOpen/WithRangeOption/Basics (0.00s) --- PASS: TestReOpen/WithRangeOption/ErrorAtStart (0.00s) --- PASS: TestReOpen/WithRangeOption/WithErrors (0.00s) --- PASS: TestReOpen/WithRangeOption/TooManyErrors (0.00s) --- PASS: TestReOpen/WithRangeOption/ReadAt (0.00s) --- PASS: TestReOpen/WithRangeOption/Seek (0.00s) --- PASS: TestReOpen/WithRangeOption/AccountRead (0.00s) --- PASS: TestReOpen/WithRangeOption/AccountReadDelay (0.00s) --- PASS: TestReOpen/WithRangeOption/AccountReadError (0.00s) --- PASS: TestReOpen/WithSeekOption (0.00s) --- PASS: TestReOpen/WithSeekOption/Basics (0.00s) --- PASS: TestReOpen/WithSeekOption/ErrorAtStart (0.00s) --- PASS: TestReOpen/WithSeekOption/WithErrors (0.00s) --- PASS: TestReOpen/WithSeekOption/TooManyErrors (0.00s) --- PASS: TestReOpen/WithSeekOption/ReadAt (0.00s) --- PASS: TestReOpen/WithSeekOption/Seek (0.00s) --- PASS: TestReOpen/WithSeekOption/AccountRead (0.00s) --- PASS: TestReOpen/WithSeekOption/AccountReadDelay (0.00s) --- PASS: TestReOpen/WithSeekOption/AccountReadError (0.00s) --- PASS: TestReOpen/UnknownSize (0.00s) --- PASS: TestReOpen/UnknownSize/Basics (0.00s) --- PASS: TestReOpen/UnknownSize/ErrorAtStart (0.00s) --- PASS: TestReOpen/UnknownSize/WithErrors (0.00s) --- PASS: TestReOpen/UnknownSize/TooManyErrors (0.00s) --- PASS: TestReOpen/UnknownSize/ReadAt (0.00s) --- PASS: TestReOpen/UnknownSize/Seek (0.00s) --- PASS: TestReOpen/UnknownSize/AccountRead (0.00s) --- PASS: TestReOpen/UnknownSize/AccountReadDelay (0.00s) --- PASS: TestReOpen/UnknownSize/AccountReadError (0.00s) === RUN TestCheck run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" === RUN TestCheck/1 === RUN TestCheck/2 === RUN TestCheck/3 === RUN TestCheck/4 === RUN TestCheck/5 === RUN TestCheck/6 === RUN TestCheck/7 --- PASS: TestCheck (5.20s) --- PASS: TestCheck/1 (0.13s) --- PASS: TestCheck/2 (0.11s) --- PASS: TestCheck/3 (0.11s) --- PASS: TestCheck/4 (0.11s) --- PASS: TestCheck/5 (0.11s) --- PASS: TestCheck/6 (0.12s) --- PASS: TestCheck/7 (0.15s) === RUN TestCheckFsError 2025/11/29 02:22:39 DEBUG : Creating backend with remote "nonexistent" 2025/11/29 02:22:39 DEBUG : Creating backend with remote "nonexistent" 2025/11/29 02:22:39 DEBUG : Local file system at /home/rclone/go/src/github.com/rclone/rclone/fs/operations/nonexistent: Waiting for checks to finish 2025/11/29 02:22:39 ERROR : Local file system at /home/rclone/go/src/github.com/rclone/rclone/fs/operations/nonexistent: error reading source root directory: directory not found 2025/11/29 02:22:39 NOTICE: Local file system at /home/rclone/go/src/github.com/rclone/rclone/fs/operations/nonexistent: 0 differences found 2025/11/29 02:22:39 NOTICE: Local file system at /home/rclone/go/src/github.com/rclone/rclone/fs/operations/nonexistent: 2 errors while checking --- PASS: TestCheckFsError (0.00s) === RUN TestCheckDownload run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" === RUN TestCheckDownload/1 === RUN TestCheckDownload/2 === RUN TestCheckDownload/3 === RUN TestCheckDownload/4 === RUN TestCheckDownload/5 === RUN TestCheckDownload/6 === RUN TestCheckDownload/7 --- PASS: TestCheckDownload (5.42s) --- PASS: TestCheckDownload/1 (0.23s) --- PASS: TestCheckDownload/2 (0.23s) --- PASS: TestCheckDownload/3 (0.24s) --- PASS: TestCheckDownload/4 (0.23s) --- PASS: TestCheckDownload/5 (0.23s) --- PASS: TestCheckDownload/6 (0.24s) --- PASS: TestCheckDownload/7 (0.30s) === RUN TestCheckSizeOnly run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" === RUN TestCheckSizeOnly/1 === RUN TestCheckSizeOnly/2 === RUN TestCheckSizeOnly/3 === RUN TestCheckSizeOnly/4 === RUN TestCheckSizeOnly/5 === RUN TestCheckSizeOnly/6 === RUN TestCheckSizeOnly/7 --- PASS: TestCheckSizeOnly (4.46s) --- PASS: TestCheckSizeOnly/1 (0.12s) --- PASS: TestCheckSizeOnly/2 (0.13s) --- PASS: TestCheckSizeOnly/3 (0.12s) --- PASS: TestCheckSizeOnly/4 (0.11s) --- PASS: TestCheckSizeOnly/5 (0.11s) --- PASS: TestCheckSizeOnly/6 (0.12s) --- PASS: TestCheckSizeOnly/7 (0.11s) === RUN TestCheckEqualReaders --- PASS: TestCheckEqualReaders (0.00s) === RUN TestParseSumFile run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" 2025/11/29 02:22:49 NOTICE: test.sum: improperly formatted checksum line 4 2025/11/29 02:22:49 NOTICE: test.sum: improperly formatted checksum line 5 2025/11/29 02:22:49 NOTICE: test.sum: improperly formatted checksum line 6 2025/11/29 02:22:49 NOTICE: test.sum: 2 warning(s) suppressed... 2025/11/29 02:22:50 NOTICE: test.sum: improperly formatted checksum line 4 2025/11/29 02:22:50 NOTICE: test.sum: improperly formatted checksum line 5 2025/11/29 02:22:50 NOTICE: test.sum: improperly formatted checksum line 6 2025/11/29 02:22:50 NOTICE: test.sum: 2 warning(s) suppressed... --- PASS: TestParseSumFile (1.43s) === RUN TestCheckSum run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" 2025/11/29 02:22:50 DEBUG : Creating backend with remote "TestS3Wasabi:rclone-test-yexofaj6qosa/data" === RUN TestCheckSum/subtest1 === RUN TestCheckSum/subtest2 === RUN TestCheckSum/subtest3 === RUN TestCheckSum/subtest4 === RUN TestCheckSum/subtest5 === RUN TestCheckSum/subtest6 === RUN TestCheckSum/subtest7 --- PASS: TestCheckSum (10.15s) --- PASS: TestCheckSum/subtest1 (0.34s) --- PASS: TestCheckSum/subtest2 (0.49s) --- PASS: TestCheckSum/subtest3 (0.35s) --- PASS: TestCheckSum/subtest4 (0.33s) --- PASS: TestCheckSum/subtest5 (0.34s) --- PASS: TestCheckSum/subtest6 (0.33s) --- PASS: TestCheckSum/subtest7 (0.37s) === RUN TestCheckSumDownload run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" 2025/11/29 02:23:00 DEBUG : Creating backend with remote "TestS3Wasabi:rclone-test-yexofaj6qosa/data" === RUN TestCheckSumDownload/subtest1 === RUN TestCheckSumDownload/subtest2 === RUN TestCheckSumDownload/subtest3 === RUN TestCheckSumDownload/subtest4 === RUN TestCheckSumDownload/subtest5 === RUN TestCheckSumDownload/subtest6 === RUN TestCheckSumDownload/subtest7 --- PASS: TestCheckSumDownload (11.46s) --- PASS: TestCheckSumDownload/subtest1 (0.46s) --- PASS: TestCheckSumDownload/subtest2 (0.44s) --- PASS: TestCheckSumDownload/subtest3 (0.66s) --- PASS: TestCheckSumDownload/subtest4 (0.69s) --- PASS: TestCheckSumDownload/subtest5 (0.44s) --- PASS: TestCheckSumDownload/subtest6 (0.59s) --- PASS: TestCheckSumDownload/subtest7 (0.50s) === RUN TestApplyTransforms 2025/11/29 02:23:12 DEBUG : Creating backend with remote "TestS3Wasabi:rclone-test-vakuyim2zaco" 2025/11/29 02:23:12 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2025/11/29 02:23:12 DEBUG : Creating backend with remote "/tmp/rclone3808945522" run.go:185: Remote "S3 bucket rclone-test-vakuyim2zaco", Local "Local file system at /tmp/rclone3808945522", Modify Window "1ns" 2025/11/29 02:23:12 INFO : S3 bucket rclone-test-vakuyim2zaco: Bucket "rclone-test-vakuyim2zaco" created with ACL "" upper checkfile vs. lower remote (without normalization) 2025/11/29 02:23:13 ERROR : hello, world!: sum not found 2025/11/29 02:23:13 ERROR : HELLO, WORLD!: file not in S3 bucket rclone-test-vakuyim2zaco 2025/11/29 02:23:13 NOTICE: S3 bucket rclone-test-vakuyim2zaco: 1 files missing 2025/11/29 02:23:13 NOTICE: 1 hashes missing 2025/11/29 02:23:13 NOTICE: S3 bucket rclone-test-vakuyim2zaco: 1 differences found 2025/11/29 02:23:13 NOTICE: S3 bucket rclone-test-vakuyim2zaco: 2 errors while checking upper checkfile vs. lower remote (with normalization) 2025/11/29 02:23:13 DEBUG : hello, world!: md5 = 65a8e27d8879283831b664bd8b7f0ad4 OK 2025/11/29 02:23:13 NOTICE: S3 bucket rclone-test-vakuyim2zaco: 0 differences found 2025/11/29 02:23:13 NOTICE: S3 bucket rclone-test-vakuyim2zaco: 1 matching files 2025/11/29 02:23:13 DEBUG : Creating backend with remote "TestS3Wasabi:rclone-test-javijay9coji" 2025/11/29 02:23:13 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2025/11/29 02:23:13 DEBUG : Creating backend with remote "/tmp/rclone174221615" run.go:185: Remote "S3 bucket rclone-test-javijay9coji", Local "Local file system at /tmp/rclone174221615", Modify Window "1ns" 2025/11/29 02:23:14 INFO : S3 bucket rclone-test-javijay9coji: Bucket "rclone-test-javijay9coji" created with ACL "" lower checkfile vs. upper remote (without normalization) 2025/11/29 02:23:14 ERROR : HELLO, WORLD!: sum not found 2025/11/29 02:23:14 ERROR : hello, world!: file not in S3 bucket rclone-test-javijay9coji 2025/11/29 02:23:14 NOTICE: S3 bucket rclone-test-javijay9coji: 1 files missing 2025/11/29 02:23:14 NOTICE: 1 hashes missing 2025/11/29 02:23:14 NOTICE: S3 bucket rclone-test-javijay9coji: 1 differences found 2025/11/29 02:23:14 NOTICE: S3 bucket rclone-test-javijay9coji: 2 errors while checking lower checkfile vs. upper remote (with normalization) 2025/11/29 02:23:15 DEBUG : HELLO, WORLD!: md5 = 65a8e27d8879283831b664bd8b7f0ad4 OK 2025/11/29 02:23:15 NOTICE: S3 bucket rclone-test-javijay9coji: 0 differences found 2025/11/29 02:23:15 NOTICE: S3 bucket rclone-test-javijay9coji: 1 matching files 2025/11/29 02:23:15 DEBUG : Creating backend with remote "TestS3Wasabi:rclone-test-xugumeb2jiwo" 2025/11/29 02:23:15 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2025/11/29 02:23:15 DEBUG : Creating backend with remote "/tmp/rclone271036442" run.go:185: Remote "S3 bucket rclone-test-xugumeb2jiwo", Local "Local file system at /tmp/rclone271036442", Modify Window "1ns" 2025/11/29 02:23:15 INFO : S3 bucket rclone-test-xugumeb2jiwo: Bucket "rclone-test-xugumeb2jiwo" created with ACL "" lower checkfile vs. upperlowermixed remote (without normalization) 2025/11/29 02:23:16 ERROR : HeLlO, wOrLd!: sum not found 2025/11/29 02:23:16 ERROR : hello, world!: file not in S3 bucket rclone-test-xugumeb2jiwo 2025/11/29 02:23:16 NOTICE: S3 bucket rclone-test-xugumeb2jiwo: 1 files missing 2025/11/29 02:23:16 NOTICE: 1 hashes missing 2025/11/29 02:23:16 NOTICE: S3 bucket rclone-test-xugumeb2jiwo: 1 differences found 2025/11/29 02:23:16 NOTICE: S3 bucket rclone-test-xugumeb2jiwo: 2 errors while checking lower checkfile vs. upperlowermixed remote (with normalization) 2025/11/29 02:23:16 DEBUG : HeLlO, wOrLd!: md5 = 65a8e27d8879283831b664bd8b7f0ad4 OK 2025/11/29 02:23:16 NOTICE: S3 bucket rclone-test-xugumeb2jiwo: 0 differences found 2025/11/29 02:23:16 NOTICE: S3 bucket rclone-test-xugumeb2jiwo: 1 matching files 2025/11/29 02:23:16 DEBUG : Creating backend with remote "TestS3Wasabi:rclone-test-tonuxif0sesi" 2025/11/29 02:23:16 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2025/11/29 02:23:16 DEBUG : Creating backend with remote "/tmp/rclone3465043292" run.go:185: Remote "S3 bucket rclone-test-tonuxif0sesi", Local "Local file system at /tmp/rclone3465043292", Modify Window "1ns" 2025/11/29 02:23:17 INFO : S3 bucket rclone-test-tonuxif0sesi: Bucket "rclone-test-tonuxif0sesi" created with ACL "" upperlowermixed checkfile vs. upper remote (without normalization) 2025/11/29 02:23:17 ERROR : HELLO, WORLD!: sum not found 2025/11/29 02:23:17 ERROR : HeLlO, wOrLd!: file not in S3 bucket rclone-test-tonuxif0sesi 2025/11/29 02:23:17 NOTICE: S3 bucket rclone-test-tonuxif0sesi: 1 files missing 2025/11/29 02:23:17 NOTICE: 1 hashes missing 2025/11/29 02:23:17 NOTICE: S3 bucket rclone-test-tonuxif0sesi: 1 differences found 2025/11/29 02:23:17 NOTICE: S3 bucket rclone-test-tonuxif0sesi: 2 errors while checking upperlowermixed checkfile vs. upper remote (with normalization) 2025/11/29 02:23:18 DEBUG : HELLO, WORLD!: md5 = 65a8e27d8879283831b664bd8b7f0ad4 OK 2025/11/29 02:23:18 NOTICE: S3 bucket rclone-test-tonuxif0sesi: 0 differences found 2025/11/29 02:23:18 NOTICE: S3 bucket rclone-test-tonuxif0sesi: 1 matching files 2025/11/29 02:23:18 DEBUG : Creating backend with remote "TestS3Wasabi:rclone-test-jeputey6puce" 2025/11/29 02:23:18 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2025/11/29 02:23:18 DEBUG : Creating backend with remote "/tmp/rclone1713138906" run.go:185: Remote "S3 bucket rclone-test-jeputey6puce", Local "Local file system at /tmp/rclone1713138906", Modify Window "1ns" 2025/11/29 02:23:18 INFO : S3 bucket rclone-test-jeputey6puce: Bucket "rclone-test-jeputey6puce" created with ACL "" NFD checkfile vs. NFC remote (without normalization) 2025/11/29 02:23:19 ERROR : 測試_Русский___ě_áñ: sum not found 2025/11/29 02:23:19 ERROR : 測試_Русский___ě_áñ: file not in S3 bucket rclone-test-jeputey6puce 2025/11/29 02:23:19 NOTICE: S3 bucket rclone-test-jeputey6puce: 1 files missing 2025/11/29 02:23:19 NOTICE: 1 hashes missing 2025/11/29 02:23:19 NOTICE: S3 bucket rclone-test-jeputey6puce: 1 differences found 2025/11/29 02:23:19 NOTICE: S3 bucket rclone-test-jeputey6puce: 2 errors while checking NFD checkfile vs. NFC remote (with normalization) 2025/11/29 02:23:19 DEBUG : 測試_Русский___ě_áñ: md5 = 65a8e27d8879283831b664bd8b7f0ad4 OK 2025/11/29 02:23:19 NOTICE: S3 bucket rclone-test-jeputey6puce: 0 differences found 2025/11/29 02:23:19 NOTICE: S3 bucket rclone-test-jeputey6puce: 1 matching files 2025/11/29 02:23:19 DEBUG : Creating backend with remote "TestS3Wasabi:rclone-test-rewajug4hexi" 2025/11/29 02:23:19 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2025/11/29 02:23:19 DEBUG : Creating backend with remote "/tmp/rclone484298000" run.go:185: Remote "S3 bucket rclone-test-rewajug4hexi", Local "Local file system at /tmp/rclone484298000", Modify Window "1ns" 2025/11/29 02:23:20 INFO : S3 bucket rclone-test-rewajug4hexi: Bucket "rclone-test-rewajug4hexi" created with ACL "" NFC checkfile vs. NFD remote (without normalization) 2025/11/29 02:23:20 ERROR : 測試_Русский___ě_áñ: sum not found 2025/11/29 02:23:20 ERROR : 測試_Русский___ě_áñ: file not in S3 bucket rclone-test-rewajug4hexi 2025/11/29 02:23:20 NOTICE: S3 bucket rclone-test-rewajug4hexi: 1 files missing 2025/11/29 02:23:20 NOTICE: 1 hashes missing 2025/11/29 02:23:20 NOTICE: S3 bucket rclone-test-rewajug4hexi: 1 differences found 2025/11/29 02:23:20 NOTICE: S3 bucket rclone-test-rewajug4hexi: 2 errors while checking NFC checkfile vs. NFD remote (with normalization) 2025/11/29 02:23:21 DEBUG : 測試_Русский___ě_áñ: md5 = 65a8e27d8879283831b664bd8b7f0ad4 OK 2025/11/29 02:23:21 NOTICE: S3 bucket rclone-test-rewajug4hexi: 0 differences found 2025/11/29 02:23:21 NOTICE: S3 bucket rclone-test-rewajug4hexi: 1 matching files 2025/11/29 02:23:21 DEBUG : Creating backend with remote "TestS3Wasabi:rclone-test-geluhuz1libi" 2025/11/29 02:23:21 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2025/11/29 02:23:21 DEBUG : Creating backend with remote "/tmp/rclone1857130422" run.go:185: Remote "S3 bucket rclone-test-geluhuz1libi", Local "Local file system at /tmp/rclone1857130422", Modify Window "1ns" 2025/11/29 02:23:22 INFO : S3 bucket rclone-test-geluhuz1libi: Bucket "rclone-test-geluhuz1libi" created with ACL "" NFDx2 checkfile vs. both remote (without normalization) 2025/11/29 02:23:22 ERROR : 測試_Русский___ě_áñ測試_Русский___ě_áñ: sum not found 2025/11/29 02:23:22 ERROR : 測試_Русский___ě_áñ測試_Русский___ě_áñ: file not in S3 bucket rclone-test-geluhuz1libi 2025/11/29 02:23:22 NOTICE: S3 bucket rclone-test-geluhuz1libi: 1 files missing 2025/11/29 02:23:22 NOTICE: 1 hashes missing 2025/11/29 02:23:22 NOTICE: S3 bucket rclone-test-geluhuz1libi: 1 differences found 2025/11/29 02:23:22 NOTICE: S3 bucket rclone-test-geluhuz1libi: 2 errors while checking NFDx2 checkfile vs. both remote (with normalization) 2025/11/29 02:23:22 DEBUG : 測試_Русский___ě_áñ測試_Русский___ě_áñ: md5 = 65a8e27d8879283831b664bd8b7f0ad4 OK 2025/11/29 02:23:22 NOTICE: S3 bucket rclone-test-geluhuz1libi: 0 differences found 2025/11/29 02:23:22 NOTICE: S3 bucket rclone-test-geluhuz1libi: 1 matching files 2025/11/29 02:23:22 DEBUG : Creating backend with remote "TestS3Wasabi:rclone-test-yefexow8sesu" 2025/11/29 02:23:22 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2025/11/29 02:23:22 DEBUG : Creating backend with remote "/tmp/rclone2429162864" run.go:185: Remote "S3 bucket rclone-test-yefexow8sesu", Local "Local file system at /tmp/rclone2429162864", Modify Window "1ns" 2025/11/29 02:23:23 INFO : S3 bucket rclone-test-yefexow8sesu: Bucket "rclone-test-yefexow8sesu" created with ACL "" NFCx2 checkfile vs. both remote (without normalization) 2025/11/29 02:23:24 ERROR : 測試_Русский___ě_áñ測試_Русский___ě_áñ: sum not found 2025/11/29 02:23:24 ERROR : 測試_Русский___ě_áñ測試_Русский___ě_áñ: file not in S3 bucket rclone-test-yefexow8sesu 2025/11/29 02:23:24 NOTICE: S3 bucket rclone-test-yefexow8sesu: 1 files missing 2025/11/29 02:23:24 NOTICE: 1 hashes missing 2025/11/29 02:23:24 NOTICE: S3 bucket rclone-test-yefexow8sesu: 1 differences found 2025/11/29 02:23:24 NOTICE: S3 bucket rclone-test-yefexow8sesu: 2 errors while checking NFCx2 checkfile vs. both remote (with normalization) 2025/11/29 02:23:24 DEBUG : 測試_Русский___ě_áñ測試_Русский___ě_áñ: md5 = 65a8e27d8879283831b664bd8b7f0ad4 OK 2025/11/29 02:23:24 NOTICE: S3 bucket rclone-test-yefexow8sesu: 0 differences found 2025/11/29 02:23:24 NOTICE: S3 bucket rclone-test-yefexow8sesu: 1 matching files 2025/11/29 02:23:24 DEBUG : Creating backend with remote "TestS3Wasabi:rclone-test-kupukiq9nuni" 2025/11/29 02:23:24 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2025/11/29 02:23:24 DEBUG : Creating backend with remote "/tmp/rclone806985715" run.go:185: Remote "S3 bucket rclone-test-kupukiq9nuni", Local "Local file system at /tmp/rclone806985715", Modify Window "1ns" 2025/11/29 02:23:25 INFO : S3 bucket rclone-test-kupukiq9nuni: Bucket "rclone-test-kupukiq9nuni" created with ACL "" both checkfile vs. NFDx2 remote (without normalization) 2025/11/29 02:23:25 ERROR : 測試_Русский___ě_áñ測試_Русский___ě_áñ: sum not found 2025/11/29 02:23:25 ERROR : 測試_Русский___ě_áñ測試_Русский___ě_áñ: file not in S3 bucket rclone-test-kupukiq9nuni 2025/11/29 02:23:25 NOTICE: S3 bucket rclone-test-kupukiq9nuni: 1 files missing 2025/11/29 02:23:25 NOTICE: 1 hashes missing 2025/11/29 02:23:25 NOTICE: S3 bucket rclone-test-kupukiq9nuni: 1 differences found 2025/11/29 02:23:25 NOTICE: S3 bucket rclone-test-kupukiq9nuni: 2 errors while checking both checkfile vs. NFDx2 remote (with normalization) 2025/11/29 02:23:25 DEBUG : 測試_Русский___ě_áñ測試_Русский___ě_áñ: md5 = 65a8e27d8879283831b664bd8b7f0ad4 OK 2025/11/29 02:23:25 NOTICE: S3 bucket rclone-test-kupukiq9nuni: 0 differences found 2025/11/29 02:23:25 NOTICE: S3 bucket rclone-test-kupukiq9nuni: 1 matching files 2025/11/29 02:23:25 DEBUG : Creating backend with remote "TestS3Wasabi:rclone-test-sutiwoh5liju" 2025/11/29 02:23:25 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2025/11/29 02:23:25 DEBUG : Creating backend with remote "/tmp/rclone2708191019" run.go:185: Remote "S3 bucket rclone-test-sutiwoh5liju", Local "Local file system at /tmp/rclone2708191019", Modify Window "1ns" 2025/11/29 02:23:26 INFO : S3 bucket rclone-test-sutiwoh5liju: Bucket "rclone-test-sutiwoh5liju" created with ACL "" both checkfile vs. NFCx2 remote (without normalization) 2025/11/29 02:23:26 ERROR : 測試_Русский___ě_áñ測試_Русский___ě_áñ: sum not found 2025/11/29 02:23:26 ERROR : 測試_Русский___ě_áñ測試_Русский___ě_áñ: file not in S3 bucket rclone-test-sutiwoh5liju 2025/11/29 02:23:26 NOTICE: S3 bucket rclone-test-sutiwoh5liju: 1 files missing 2025/11/29 02:23:26 NOTICE: 1 hashes missing 2025/11/29 02:23:26 NOTICE: S3 bucket rclone-test-sutiwoh5liju: 1 differences found 2025/11/29 02:23:26 NOTICE: S3 bucket rclone-test-sutiwoh5liju: 2 errors while checking both checkfile vs. NFCx2 remote (with normalization) 2025/11/29 02:23:27 DEBUG : 測試_Русский___ě_áñ測試_Русский___ě_áñ: md5 = 65a8e27d8879283831b664bd8b7f0ad4 OK 2025/11/29 02:23:27 NOTICE: S3 bucket rclone-test-sutiwoh5liju: 0 differences found 2025/11/29 02:23:27 NOTICE: S3 bucket rclone-test-sutiwoh5liju: 1 matching files 2025/11/29 02:23:27 DEBUG : S3 bucket rclone-test-sutiwoh5liju: Purge remote 2025/11/29 02:23:27 DEBUG : S3 bucket rclone-test-sutiwoh5liju: bucket is versioned: false 2025/11/29 02:23:27 DEBUG : Waiting for deletions to finish 2025/11/29 02:23:27 DEBUG : "測試_Русский___ě_áñ測試_Русский___ě_áñ" version false 2025/11/29 02:23:27 DEBUG : 測試_Русский___ě_áñ測試_Русский___ě_áñ: Deleting (id "") 2025/11/29 02:23:27 INFO : 測試_Русский___ě_áñ測試_Русский___ě_áñ: Deleted 2025/11/29 02:23:29 INFO : S3 bucket rclone-test-sutiwoh5liju: Bucket "rclone-test-sutiwoh5liju" deleted 2025/11/29 02:23:29 DEBUG : S3 bucket rclone-test-kupukiq9nuni: Purge remote 2025/11/29 02:23:29 DEBUG : S3 bucket rclone-test-kupukiq9nuni: bucket is versioned: false 2025/11/29 02:23:29 DEBUG : Waiting for deletions to finish 2025/11/29 02:23:29 DEBUG : "測試_Русский___ě_áñ測試_Русский___ě_áñ" version false 2025/11/29 02:23:29 DEBUG : 測試_Русский___ě_áñ測試_Русский___ě_áñ: Deleting (id "") 2025/11/29 02:23:29 INFO : 測試_Русский___ě_áñ測試_Русский___ě_áñ: Deleted 2025/11/29 02:23:31 INFO : S3 bucket rclone-test-kupukiq9nuni: Bucket "rclone-test-kupukiq9nuni" deleted 2025/11/29 02:23:31 DEBUG : S3 bucket rclone-test-yefexow8sesu: Purge remote 2025/11/29 02:23:31 DEBUG : S3 bucket rclone-test-yefexow8sesu: bucket is versioned: false 2025/11/29 02:23:31 DEBUG : Waiting for deletions to finish 2025/11/29 02:23:31 DEBUG : "測試_Русский___ě_áñ測試_Русский___ě_áñ" version false 2025/11/29 02:23:31 DEBUG : 測試_Русский___ě_áñ測試_Русский___ě_áñ: Deleting (id "") 2025/11/29 02:23:31 INFO : 測試_Русский___ě_áñ測試_Русский___ě_áñ: Deleted 2025/11/29 02:23:33 INFO : S3 bucket rclone-test-yefexow8sesu: Bucket "rclone-test-yefexow8sesu" deleted 2025/11/29 02:23:33 DEBUG : S3 bucket rclone-test-geluhuz1libi: Purge remote 2025/11/29 02:23:33 DEBUG : S3 bucket rclone-test-geluhuz1libi: bucket is versioned: false 2025/11/29 02:23:33 DEBUG : Waiting for deletions to finish 2025/11/29 02:23:33 DEBUG : "測試_Русский___ě_áñ測試_Русский___ě_áñ" version false 2025/11/29 02:23:33 DEBUG : 測試_Русский___ě_áñ測試_Русский___ě_áñ: Deleting (id "") 2025/11/29 02:23:33 INFO : 測試_Русский___ě_áñ測試_Русский___ě_áñ: Deleted 2025/11/29 02:23:34 INFO : S3 bucket rclone-test-geluhuz1libi: Bucket "rclone-test-geluhuz1libi" deleted 2025/11/29 02:23:34 DEBUG : S3 bucket rclone-test-rewajug4hexi: Purge remote 2025/11/29 02:23:34 DEBUG : S3 bucket rclone-test-rewajug4hexi: bucket is versioned: false 2025/11/29 02:23:34 DEBUG : Waiting for deletions to finish 2025/11/29 02:23:34 DEBUG : "測試_Русский___ě_áñ" version false 2025/11/29 02:23:34 DEBUG : 測試_Русский___ě_áñ: Deleting (id "") 2025/11/29 02:23:34 INFO : 測試_Русский___ě_áñ: Deleted 2025/11/29 02:23:35 INFO : S3 bucket rclone-test-rewajug4hexi: Bucket "rclone-test-rewajug4hexi" deleted 2025/11/29 02:23:35 DEBUG : S3 bucket rclone-test-jeputey6puce: Purge remote 2025/11/29 02:23:35 DEBUG : S3 bucket rclone-test-jeputey6puce: bucket is versioned: false 2025/11/29 02:23:35 DEBUG : Waiting for deletions to finish 2025/11/29 02:23:35 DEBUG : "測試_Русский___ě_áñ" version false 2025/11/29 02:23:35 DEBUG : 測試_Русский___ě_áñ: Deleting (id "") 2025/11/29 02:23:35 INFO : 測試_Русский___ě_áñ: Deleted 2025/11/29 02:23:36 INFO : S3 bucket rclone-test-jeputey6puce: Bucket "rclone-test-jeputey6puce" deleted 2025/11/29 02:23:36 DEBUG : S3 bucket rclone-test-tonuxif0sesi: Purge remote 2025/11/29 02:23:36 DEBUG : S3 bucket rclone-test-tonuxif0sesi: bucket is versioned: false 2025/11/29 02:23:36 DEBUG : Waiting for deletions to finish 2025/11/29 02:23:36 DEBUG : "HELLO, WORLD!" version false 2025/11/29 02:23:36 DEBUG : HELLO, WORLD!: Deleting (id "") 2025/11/29 02:23:36 INFO : HELLO, WORLD!: Deleted 2025/11/29 02:23:37 INFO : S3 bucket rclone-test-tonuxif0sesi: Bucket "rclone-test-tonuxif0sesi" deleted 2025/11/29 02:23:37 DEBUG : S3 bucket rclone-test-xugumeb2jiwo: Purge remote 2025/11/29 02:23:37 DEBUG : S3 bucket rclone-test-xugumeb2jiwo: bucket is versioned: false 2025/11/29 02:23:37 DEBUG : Waiting for deletions to finish 2025/11/29 02:23:37 DEBUG : "HeLlO, wOrLd!" version false 2025/11/29 02:23:37 DEBUG : HeLlO, wOrLd!: Deleting (id "") 2025/11/29 02:23:37 INFO : HeLlO, wOrLd!: Deleted 2025/11/29 02:23:37 INFO : S3 bucket rclone-test-xugumeb2jiwo: Bucket "rclone-test-xugumeb2jiwo" deleted 2025/11/29 02:23:37 DEBUG : S3 bucket rclone-test-javijay9coji: Purge remote 2025/11/29 02:23:38 DEBUG : S3 bucket rclone-test-javijay9coji: bucket is versioned: false 2025/11/29 02:23:38 DEBUG : Waiting for deletions to finish 2025/11/29 02:23:38 DEBUG : "HELLO, WORLD!" version false 2025/11/29 02:23:38 DEBUG : HELLO, WORLD!: Deleting (id "") 2025/11/29 02:23:38 INFO : HELLO, WORLD!: Deleted 2025/11/29 02:23:38 INFO : S3 bucket rclone-test-javijay9coji: Bucket "rclone-test-javijay9coji" deleted 2025/11/29 02:23:38 DEBUG : S3 bucket rclone-test-vakuyim2zaco: Purge remote 2025/11/29 02:23:39 DEBUG : S3 bucket rclone-test-vakuyim2zaco: bucket is versioned: false 2025/11/29 02:23:39 DEBUG : Waiting for deletions to finish 2025/11/29 02:23:39 DEBUG : "hello, world!" version false 2025/11/29 02:23:39 DEBUG : hello, world!: Deleting (id "") 2025/11/29 02:23:39 INFO : hello, world!: Deleted 2025/11/29 02:23:39 INFO : S3 bucket rclone-test-vakuyim2zaco: Bucket "rclone-test-vakuyim2zaco" deleted --- PASS: TestApplyTransforms (27.63s) === RUN TestTruncateString --- PASS: TestTruncateString (0.00s) === RUN TestCopyFile run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" 2025/11/29 02:23:39 DEBUG : file1: Need to transfer - File not found at Destination 2025/11/29 02:23:40 DEBUG : sub/file2: size = 14 OK 2025/11/29 02:23:40 DEBUG : file1: md5 = 0ef726ce9b1a7692357ff70dd321d595 OK 2025/11/29 02:23:40 INFO : file1: Copied (new) to: sub/file2 2025/11/29 02:23:40 DEBUG : sub/file2: size = 14 OK 2025/11/29 02:23:40 DEBUG : file1: Size and modification time the same (differ by 0s, within tolerance 1ns) 2025/11/29 02:23:40 DEBUG : file1: Unchanged skipping 2025/11/29 02:23:40 DEBUG : S3 bucket rclone-test-yexofaj6qosa: don't need to copy/move sub/file2, it is already at target location --- PASS: TestCopyFile (1.56s) === RUN TestCopyLongFile run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" copy_test.go:154: Test only runs on local --- SKIP: TestCopyLongFile (0.24s) === RUN TestCopyFileBackupDir run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" 2025/11/29 02:23:42 DEBUG : Creating backend with remote "TestS3Wasabi:rclone-test-yexofaj6qosa/backup" 2025/11/29 02:23:42 DEBUG : dst/file1: size = 14 (Local file system at /tmp/rclone3326563316) 2025/11/29 02:23:42 DEBUG : dst/file1: size = 18 (S3 bucket rclone-test-yexofaj6qosa) 2025/11/29 02:23:42 DEBUG : dst/file1: Sizes differ 2025/11/29 02:23:43 INFO : S3 bucket rclone-test-yexofaj6qosa path backup: Bucket "rclone-test-yexofaj6qosa" created with ACL "" 2025/11/29 02:23:43 DEBUG : dst/file1: size = 18 OK 2025/11/29 02:23:43 DEBUG : dst/file1: md5 = 05164b153084ba910184c26e561a7c18 OK 2025/11/29 02:23:43 INFO : dst/file1: Copied (server-side copy) 2025/11/29 02:23:43 INFO : dst/file1: Deleted 2025/11/29 02:23:44 DEBUG : dst/file1: size = 14 OK 2025/11/29 02:23:44 DEBUG : dst/file1: md5 = 0ef726ce9b1a7692357ff70dd321d595 OK 2025/11/29 02:23:44 INFO : dst/file1: Copied (new) --- PASS: TestCopyFileBackupDir (3.16s) === RUN TestCopyFileCompareDest run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" 2025/11/29 02:23:44 DEBUG : Creating backend with remote "TestS3Wasabi:rclone-test-yexofaj6qosa/dst" 2025/11/29 02:23:45 DEBUG : Creating backend with remote "TestS3Wasabi:rclone-test-yexofaj6qosa/CompareDest" 2025/11/29 02:23:46 DEBUG : one: Need to transfer - File not found at Destination 2025/11/29 02:23:46 INFO : S3 bucket rclone-test-yexofaj6qosa path dst: Bucket "rclone-test-yexofaj6qosa" created with ACL "" 2025/11/29 02:23:46 DEBUG : one: size = 3 OK 2025/11/29 02:23:46 DEBUG : one: md5 = f97c5d29941bfb1b2fdab0874906ab82 OK 2025/11/29 02:23:46 INFO : one: Copied (new) 2025/11/29 02:23:47 DEBUG : one: size = 5 (Local file system at /tmp/rclone3326563316) 2025/11/29 02:23:47 DEBUG : one: size = 3 (S3 bucket rclone-test-yexofaj6qosa path dst) 2025/11/29 02:23:47 DEBUG : one: Sizes differ 2025/11/29 02:23:47 DEBUG : one: size = 5 OK 2025/11/29 02:23:47 DEBUG : one: md5 = 07912d142f5d63ee918b34796b5a2432 OK 2025/11/29 02:23:47 INFO : one: Copied (replaced existing) 2025/11/29 02:23:49 DEBUG : one: size = 5 (Local file system at /tmp/rclone3326563316) 2025/11/29 02:23:49 DEBUG : one: size = 3 (S3 bucket rclone-test-yexofaj6qosa path dst) 2025/11/29 02:23:49 DEBUG : one: Sizes differ 2025/11/29 02:23:49 DEBUG : one: size = 5 OK 2025/11/29 02:23:49 DEBUG : one: Size and modification time the same (differ by 0s, within tolerance 1ns) 2025/11/29 02:23:49 DEBUG : one: Destination found in --compare-dest, skipping 2025/11/29 02:23:50 DEBUG : two: Need to transfer - File not found at Destination 2025/11/29 02:23:50 DEBUG : two: size = 3 OK 2025/11/29 02:23:50 DEBUG : two: Size and modification time the same (differ by 0s, within tolerance 1ns) 2025/11/29 02:23:50 DEBUG : two: Destination found in --compare-dest, skipping 2025/11/29 02:23:51 DEBUG : two: Need to transfer - File not found at Destination 2025/11/29 02:23:51 DEBUG : two: size = 3 OK 2025/11/29 02:23:51 DEBUG : two: Size and modification time the same (differ by 0s, within tolerance 1ns) 2025/11/29 02:23:51 DEBUG : two: Destination found in --compare-dest, skipping 2025/11/29 02:23:52 DEBUG : two: Need to transfer - File not found at Destination 2025/11/29 02:23:52 DEBUG : two: size = 5 (Local file system at /tmp/rclone3326563316) 2025/11/29 02:23:52 DEBUG : two: size = 3 (S3 bucket rclone-test-yexofaj6qosa path CompareDest) 2025/11/29 02:23:52 DEBUG : two: Sizes differ 2025/11/29 02:23:53 DEBUG : two: size = 5 OK 2025/11/29 02:23:53 DEBUG : two: md5 = 2379e4ce8c3380e996ab0509f17069ad OK 2025/11/29 02:23:53 INFO : two: Copied (new) --- PASS: TestCopyFileCompareDest (9.56s) === RUN TestCopyFileCopyDest run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" 2025/11/29 02:23:54 DEBUG : Creating backend with remote "TestS3Wasabi:rclone-test-yexofaj6qosa/dst" 2025/11/29 02:23:55 DEBUG : Creating backend with remote "TestS3Wasabi:rclone-test-yexofaj6qosa/CopyDest" 2025/11/29 02:23:55 DEBUG : one: Need to transfer - File not found at Destination 2025/11/29 02:23:56 INFO : S3 bucket rclone-test-yexofaj6qosa path dst: Bucket "rclone-test-yexofaj6qosa" created with ACL "" 2025/11/29 02:23:56 DEBUG : one: size = 3 OK 2025/11/29 02:23:56 DEBUG : one: md5 = f97c5d29941bfb1b2fdab0874906ab82 OK 2025/11/29 02:23:56 INFO : one: Copied (new) 2025/11/29 02:23:56 DEBUG : one: size = 5 (Local file system at /tmp/rclone3326563316) 2025/11/29 02:23:56 DEBUG : one: size = 3 (S3 bucket rclone-test-yexofaj6qosa path dst) 2025/11/29 02:23:56 DEBUG : one: Sizes differ 2025/11/29 02:23:57 DEBUG : one: size = 5 OK 2025/11/29 02:23:57 DEBUG : one: md5 = 07912d142f5d63ee918b34796b5a2432 OK 2025/11/29 02:23:57 INFO : one: Copied (replaced existing) 2025/11/29 02:23:59 DEBUG : Creating backend with remote "TestS3Wasabi:rclone-test-yexofaj6qosa/BackupDir" 2025/11/29 02:23:59 DEBUG : one: size = 5 (Local file system at /tmp/rclone3326563316) 2025/11/29 02:23:59 DEBUG : one: size = 3 (S3 bucket rclone-test-yexofaj6qosa path dst) 2025/11/29 02:23:59 DEBUG : one: Sizes differ 2025/11/29 02:24:00 DEBUG : one: size = 5 OK 2025/11/29 02:24:00 DEBUG : one: Size and modification time the same (differ by 0s, within tolerance 1ns) 2025/11/29 02:24:00 DEBUG : one: size = 5 (Local file system at /tmp/rclone3326563316) 2025/11/29 02:24:00 DEBUG : one: size = 3 (S3 bucket rclone-test-yexofaj6qosa path dst) 2025/11/29 02:24:00 DEBUG : one: Sizes differ 2025/11/29 02:24:00 INFO : S3 bucket rclone-test-yexofaj6qosa path BackupDir: Bucket "rclone-test-yexofaj6qosa" created with ACL "" 2025/11/29 02:24:00 DEBUG : one: size = 3 OK 2025/11/29 02:24:00 DEBUG : one: md5 = f97c5d29941bfb1b2fdab0874906ab82 OK 2025/11/29 02:24:00 INFO : one: Copied (server-side copy) 2025/11/29 02:24:00 INFO : one: Deleted 2025/11/29 02:24:01 DEBUG : one: size = 5 OK 2025/11/29 02:24:01 DEBUG : one: md5 = 07912d142f5d63ee918b34796b5a2432 OK 2025/11/29 02:24:01 INFO : one: Copied (server-side copy) 2025/11/29 02:24:01 DEBUG : one: Destination found in --copy-dest, using server-side copy 2025/11/29 02:24:02 DEBUG : two: Need to transfer - File not found at Destination 2025/11/29 02:24:02 DEBUG : two: size = 3 OK 2025/11/29 02:24:02 DEBUG : two: Size and modification time the same (differ by 0s, within tolerance 1ns) 2025/11/29 02:24:03 DEBUG : two: size = 3 OK 2025/11/29 02:24:03 DEBUG : two: md5 = b8a9f715dbb64fd5c56e7783c6820a61 OK 2025/11/29 02:24:03 INFO : two: Copied (server-side copy) 2025/11/29 02:24:03 DEBUG : two: Destination found in --copy-dest, using server-side copy 2025/11/29 02:24:03 DEBUG : two: size = 3 OK 2025/11/29 02:24:03 DEBUG : two: Size and modification time the same (differ by 0s, within tolerance 1ns) 2025/11/29 02:24:03 DEBUG : two: Unchanged skipping 2025/11/29 02:24:06 DEBUG : three: Need to transfer - File not found at Destination 2025/11/29 02:24:06 DEBUG : three: size = 7 (Local file system at /tmp/rclone3326563316) 2025/11/29 02:24:06 DEBUG : three: size = 5 (S3 bucket rclone-test-yexofaj6qosa path CopyDest) 2025/11/29 02:24:06 DEBUG : three: Sizes differ 2025/11/29 02:24:06 DEBUG : three: Destination not found in --copy-dest 2025/11/29 02:24:06 DEBUG : three: size = 7 OK 2025/11/29 02:24:06 DEBUG : three: md5 = 1bccb9dccb3e9f6a3f9d2a8bdb54b7f5 OK 2025/11/29 02:24:06 INFO : three: Copied (new) --- PASS: TestCopyFileCopyDest (14.05s) === RUN TestCopyInplace run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" copy_test.go:371: Partial uploads not supported --- SKIP: TestCopyInplace (0.36s) === RUN TestCopyLongFileName run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" copy_test.go:404: Partial uploads not supported --- SKIP: TestCopyLongFileName (0.22s) === RUN TestCopyLongFileNameCollision run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" copy_test.go:437: Partial uploads not supported --- SKIP: TestCopyLongFileNameCollision (0.22s) === RUN TestCopyFileMaxTransfer run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" 2025/11/29 02:24:09 DEBUG : TestCopyFileMaxTransfer/file1: Need to transfer - File not found at Destination 2025/11/29 02:24:09 DEBUG : TestCopyFileMaxTransfer/file1: size = 14 OK 2025/11/29 02:24:09 DEBUG : TestCopyFileMaxTransfer/file1: md5 = 0ef726ce9b1a7692357ff70dd321d595 OK 2025/11/29 02:24:09 INFO : TestCopyFileMaxTransfer/file1: Copied (new) 2025/11/29 02:24:09 DEBUG : TestCopyFileMaxTransfer/file2: Need to transfer - File not found at Destination 2025/11/29 02:24:09 ERROR : TestCopyFileMaxTransfer/file2: Failed to copy: operation error S3: PutObject, exceeded maximum number of attempts, 1, https response error StatusCode: 0, RequestID: , HostID: , request send failed, Put "https://rclone-test-yexofaj6qosa.s3.wasabisys.com/TestCopyFileMaxTransfer/file2?x-id=PutObject": max transfer limit reached as set by --max-transfer 2025/11/29 02:24:10 DEBUG : TestCopyFileMaxTransfer/file3: Need to transfer - File not found at Destination 2025/11/29 02:24:11 DEBUG : TestCopyFileMaxTransfer/file4: Need to transfer - File not found at Destination 2025/11/29 02:24:11 DEBUG : TestCopyFileMaxTransfer/file4: size = 2062 OK 2025/11/29 02:24:11 DEBUG : TestCopyFileMaxTransfer/file4: md5 = 1eabc30bb34db1c1aeb42f0a11aed730 OK 2025/11/29 02:24:11 INFO : TestCopyFileMaxTransfer/file4: Copied (new) --- PASS: TestCopyFileMaxTransfer (3.01s) === RUN TestDeduplicateInteractive run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" dedupe_test.go:24: Can't test deduplicate - no duplicate files possible --- SKIP: TestDeduplicateInteractive (0.25s) === RUN TestDeduplicateSkip run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" dedupe_test.go:24: Can't test deduplicate - no duplicate files possible --- SKIP: TestDeduplicateSkip (0.24s) === RUN TestDeduplicateSizeOnly run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" dedupe_test.go:24: Can't test deduplicate - no duplicate files possible --- SKIP: TestDeduplicateSizeOnly (0.22s) === RUN TestDeduplicateFirst run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" dedupe_test.go:24: Can't test deduplicate - no duplicate files possible --- SKIP: TestDeduplicateFirst (0.22s) === RUN TestDeduplicateNewest run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" dedupe_test.go:24: Can't test deduplicate - no duplicate files possible --- SKIP: TestDeduplicateNewest (0.23s) === RUN TestDeduplicateNewestByHash run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" 2025/11/29 02:24:15 INFO : S3 bucket rclone-test-yexofaj6qosa: Looking for duplicate md5 hashes using newest mode. 2025/11/29 02:24:15 NOTICE: 95db3e2f51ab09b2ad1f636d714f3c5a: Found 3 files with duplicate md5 hashes 2025/11/29 02:24:15 INFO : one: Deleted 2025/11/29 02:24:15 INFO : also/one: Deleted 2025/11/29 02:24:15 NOTICE: 95db3e2f51ab09b2ad1f636d714f3c5a: Deleted 2 extra copies --- PASS: TestDeduplicateNewestByHash (3.25s) === RUN TestDeduplicateOldest run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" dedupe_test.go:24: Can't test deduplicate - no duplicate files possible --- SKIP: TestDeduplicateOldest (0.22s) === RUN TestDeduplicateLargest run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" dedupe_test.go:24: Can't test deduplicate - no duplicate files possible --- SKIP: TestDeduplicateLargest (0.26s) === RUN TestDeduplicateSmallest run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" dedupe_test.go:24: Can't test deduplicate - no duplicate files possible --- SKIP: TestDeduplicateSmallest (0.22s) === RUN TestDeduplicateRename run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" dedupe_test.go:24: Can't test deduplicate - no duplicate files possible --- SKIP: TestDeduplicateRename (0.22s) === RUN TestMergeDirs run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" dedupe_test.go:256: Can't merge directories --- SKIP: TestMergeDirs (0.22s) === RUN TestListDirSorted run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" 2025/11/29 02:24:20 DEBUG : a.txt: Excluded (Size Filter) 2025/11/29 02:24:20 DEBUG : a.txt: Excluded 2025/11/29 02:24:21 DEBUG : sub dir/hello world: Excluded (Size Filter) 2025/11/29 02:24:21 DEBUG : sub dir/hello world: Excluded 2025/11/29 02:24:21 DEBUG : sub dir/hello world2: Excluded (Size Filter) 2025/11/29 02:24:21 DEBUG : sub dir/hello world2: Excluded 2025/11/29 02:24:21 DEBUG : sub dir/ignore dir: Excluded 2025/11/29 02:24:21 DEBUG : sub dir/hello world: Excluded (Size Filter) 2025/11/29 02:24:21 DEBUG : sub dir/hello world: Excluded 2025/11/29 02:24:21 DEBUG : sub dir/hello world2: Excluded (Size Filter) 2025/11/29 02:24:21 DEBUG : sub dir/hello world2: Excluded 2025/11/29 02:24:21 DEBUG : sub dir/ignore dir: Excluded --- PASS: TestListDirSorted (5.36s) === RUN TestListDirSortedFn run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" 2025/11/29 02:24:26 DEBUG : a.txt: Excluded (Size Filter) 2025/11/29 02:24:26 DEBUG : a.txt: Excluded 2025/11/29 02:24:26 DEBUG : sub dir/hello world: Excluded (Size Filter) 2025/11/29 02:24:26 DEBUG : sub dir/hello world: Excluded 2025/11/29 02:24:26 DEBUG : sub dir/hello world2: Excluded (Size Filter) 2025/11/29 02:24:26 DEBUG : sub dir/hello world2: Excluded 2025/11/29 02:24:26 DEBUG : sub dir/ignore dir: Excluded 2025/11/29 02:24:27 DEBUG : sub dir/hello world: Excluded (Size Filter) 2025/11/29 02:24:27 DEBUG : sub dir/hello world: Excluded 2025/11/29 02:24:27 DEBUG : sub dir/hello world2: Excluded (Size Filter) 2025/11/29 02:24:27 DEBUG : sub dir/hello world2: Excluded 2025/11/29 02:24:27 DEBUG : sub dir/ignore dir: Excluded --- PASS: TestListDirSortedFn (5.41s) === RUN TestListJSON run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" === RUN TestListJSON/Default === RUN TestListJSON/FilesOnly === RUN TestListJSON/DirsOnly === RUN TestListJSON/Recurse === RUN TestListJSON/SubDir === RUN TestListJSON/NoModTime === RUN TestListJSON/NoMimeType === RUN TestListJSON/ShowHash === RUN TestListJSON/HashTypes === RUN TestListJSON/Metadata --- PASS: TestListJSON (3.66s) --- PASS: TestListJSON/Default (0.23s) --- PASS: TestListJSON/FilesOnly (0.22s) --- PASS: TestListJSON/DirsOnly (0.11s) --- PASS: TestListJSON/Recurse (0.33s) --- PASS: TestListJSON/SubDir (0.23s) --- PASS: TestListJSON/NoModTime (0.22s) --- PASS: TestListJSON/NoMimeType (0.22s) --- PASS: TestListJSON/ShowHash (0.23s) --- PASS: TestListJSON/HashTypes (0.22s) --- PASS: TestListJSON/Metadata (0.23s) === RUN TestStatJSON run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" === RUN TestStatJSON/Root === RUN TestStatJSON/RootFilesOnly === RUN TestStatJSON/RootDirsOnly === RUN TestStatJSON/Dir === RUN TestStatJSON/DirWithTrailingSlash === RUN TestStatJSON/File === RUN TestStatJSON/NotFound === RUN TestStatJSON/DirFilesOnly === RUN TestStatJSON/FileFilesOnly === RUN TestStatJSON/NotFoundFilesOnly === RUN TestStatJSON/DirDirsOnly === RUN TestStatJSON/FileDirsOnly === RUN TestStatJSON/NotFoundDirsOnly === RUN TestStatJSON/RootNotFound 2025/11/29 02:24:34 DEBUG : Creating backend with remote "TestS3Wasabi:rclone-test-yexofaj6qosa/notfound" --- PASS: TestStatJSON (3.91s) --- PASS: TestStatJSON/Root (0.11s) --- PASS: TestStatJSON/RootFilesOnly (0.00s) --- PASS: TestStatJSON/RootDirsOnly (0.12s) --- PASS: TestStatJSON/Dir (0.22s) --- PASS: TestStatJSON/DirWithTrailingSlash (0.11s) --- PASS: TestStatJSON/File (0.11s) --- PASS: TestStatJSON/NotFound (0.23s) --- PASS: TestStatJSON/DirFilesOnly (0.12s) --- PASS: TestStatJSON/FileFilesOnly (0.12s) --- PASS: TestStatJSON/NotFoundFilesOnly (0.11s) --- PASS: TestStatJSON/DirDirsOnly (0.11s) --- PASS: TestStatJSON/FileDirsOnly (0.11s) --- PASS: TestStatJSON/NotFoundDirsOnly (0.12s) --- PASS: TestStatJSON/RootNotFound (0.68s) === RUN TestMkdir run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" 2025/11/29 02:24:36 INFO : S3 bucket rclone-test-yexofaj6qosa: Making directory 2025/11/29 02:24:36 INFO : S3 bucket rclone-test-yexofaj6qosa: Making directory --- PASS: TestMkdir (0.34s) === RUN TestLsd run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" --- PASS: TestLsd (0.96s) === RUN TestLs run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" --- PASS: TestLs (1.47s) === RUN TestLsWithFilesFrom run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" 2025/11/29 02:24:40 DEBUG : empty space: Excluded (FilesFrom Filter) 2025/11/29 02:24:40 DEBUG : empty space: Excluded --- PASS: TestLsWithFilesFrom (1.80s) === RUN TestLsLong run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" --- PASS: TestLsLong (1.74s) === RUN TestHashSums run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" === RUN TestHashSums/Md5 === RUN TestHashSums/Md5Download --- PASS: TestHashSums (1.73s) --- PASS: TestHashSums/Md5 (0.11s) --- PASS: TestHashSums/Md5Download (0.23s) === RUN TestHashSumsWithErrors 2025/11/29 02:24:44 DEBUG : Creating backend with remote ":memory:" 2025/11/29 02:24:44 ERROR : file1: hash unsupported: hash type not supported --- PASS: TestHashSumsWithErrors (0.00s) === RUN TestHashStream 2025/11/29 02:24:44 DEBUG : Creating md5 hash of 0 bytes read from input stream 2025/11/29 02:24:44 DEBUG : Creating md5 hash of 0 bytes read from input stream 2025/11/29 02:24:44 DEBUG : Creating sha1 hash of 0 bytes read from input stream 2025/11/29 02:24:44 DEBUG : Creating sha1 hash of 0 bytes read from input stream 2025/11/29 02:24:44 DEBUG : Creating md5 hash of 12 bytes read from input stream 2025/11/29 02:24:44 DEBUG : Creating md5 hash of 12 bytes read from input stream 2025/11/29 02:24:44 DEBUG : Creating sha1 hash of 12 bytes read from input stream 2025/11/29 02:24:44 DEBUG : Creating sha1 hash of 12 bytes read from input stream --- PASS: TestHashStream (0.00s) === RUN TestSuffixName --- PASS: TestSuffixName (0.00s) === RUN TestCount run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" --- PASS: TestCount (2.07s) === RUN TestDelete run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" 2025/11/29 02:24:47 DEBUG : Waiting for deletions to finish 2025/11/29 02:24:47 DEBUG : large: Excluded (Size Filter) 2025/11/29 02:24:47 INFO : small: Deleted 2025/11/29 02:24:47 INFO : medium: Deleted --- PASS: TestDelete (2.19s) === RUN TestMaxDelete run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" 2025/11/29 02:24:49 DEBUG : Waiting for deletions to finish 2025/11/29 02:24:50 ERROR : small: Got fatal error on delete: --max-delete threshold reached 2025/11/29 02:24:50 INFO : large: Deleted 2025/11/29 02:24:51 INFO : medium: Deleted --- PASS: TestMaxDelete (3.96s) === RUN TestMaxDeleteSizeLargeFile run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" 2025/11/29 02:24:54 DEBUG : Waiting for deletions to finish 2025/11/29 02:24:54 ERROR : large: Got fatal error on delete: --max-delete-size threshold reached 2025/11/29 02:24:54 INFO : small: Deleted 2025/11/29 02:24:54 INFO : medium: Deleted --- PASS: TestMaxDeleteSizeLargeFile (3.25s) === RUN TestMaxDeleteSize run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" 2025/11/29 02:24:57 DEBUG : Waiting for deletions to finish 2025/11/29 02:24:57 ERROR : small: Got fatal error on delete: --max-delete-size threshold reached 2025/11/29 02:24:57 INFO : medium: Deleted 2025/11/29 02:24:57 INFO : large: Deleted --- PASS: TestMaxDeleteSize (2.61s) === RUN TestReadFile run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" --- PASS: TestReadFile (2.10s) === RUN TestRetry 2025/11/29 02:25:00 DEBUG : Received error: Wrapped EOF is retriable: EOF - low level retry 1/5 2025/11/29 02:25:00 DEBUG : Received error: Wrapped EOF is retriable: EOF - low level retry 2/5 2025/11/29 02:25:00 DEBUG : Sleeping for 10ms (as indicated by the server) to obey Retry-After error: BANG: trying again in 10ms 2025/11/29 02:25:00 DEBUG : Sleeping for 10ms (as indicated by the server) to obey Retry-After error: BANG: trying again in 10ms 2025/11/29 02:25:00 DEBUG : Sleeping for 10ms (as indicated by the server) to obey Retry-After error: BANG: trying again in 10ms 2025/11/29 02:25:00 DEBUG : Sleeping for 10ms (as indicated by the server) to obey Retry-After error: BANG: trying again in 10ms 2025/11/29 02:25:00 DEBUG : Sleeping for 10ms (as indicated by the server) to obey Retry-After error: BANG: trying again in 10ms --- PASS: TestRetry (0.05s) === RUN TestCat run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" --- PASS: TestCat (4.15s) === RUN TestPurge 2025/11/29 02:25:04 DEBUG : Creating backend with remote "TestS3Wasabi:rclone-test-fudikeq0mide" 2025/11/29 02:25:04 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2025/11/29 02:25:04 DEBUG : Creating backend with remote "/tmp/rclone3326487587" run.go:185: Remote "S3 bucket rclone-test-fudikeq0mide", Local "Local file system at /tmp/rclone3326487587", Modify Window "1ns" 2025/11/29 02:25:05 INFO : S3 bucket rclone-test-fudikeq0mide: Bucket "rclone-test-fudikeq0mide" created with ACL "" 2025/11/29 02:25:05 INFO : A2: Making directory 2025/11/29 02:25:05 INFO : A1/B2: Making directory 2025/11/29 02:25:05 INFO : A1/B2/C2: Making directory 2025/11/29 02:25:05 INFO : A1/B1/C3: Making directory 2025/11/29 02:25:05 INFO : A3: Making directory 2025/11/29 02:25:05 INFO : A3/B3: Making directory 2025/11/29 02:25:05 INFO : A3/B3/C4: Making directory fstest.go:250: Filtering empty directory "A2" fstest.go:250: Filtering empty directory "A1/B2" fstest.go:250: Filtering empty directory "A1/B2/C2" fstest.go:250: Filtering empty directory "A1/B1/C3" fstest.go:250: Filtering empty directory "A3" fstest.go:250: Filtering empty directory "A3/B3" fstest.go:250: Filtering empty directory "A3/B3/C4" 2025/11/29 02:25:06 DEBUG : S3 bucket rclone-test-fudikeq0mide: bucket is versioned: false 2025/11/29 02:25:06 DEBUG : Waiting for deletions to finish 2025/11/29 02:25:06 DEBUG : "A1/B1/C1/one" version false 2025/11/29 02:25:06 DEBUG : A1/B1/C1/one: Deleting (id "") 2025/11/29 02:25:06 INFO : A1/B1/C1/one: Deleted fstest.go:250: Filtering empty directory "A2" fstest.go:250: Filtering empty directory "A1/B2" fstest.go:250: Filtering empty directory "A1/B2/C2" fstest.go:250: Filtering empty directory "A3" fstest.go:250: Filtering empty directory "A3/B3" fstest.go:250: Filtering empty directory "A3/B3/C4" 2025/11/29 02:25:06 DEBUG : Waiting for deletions to finish 2025/11/29 02:25:06 DEBUG : "A1/two" version false 2025/11/29 02:25:06 DEBUG : A1/two: Deleting (id "") 2025/11/29 02:25:07 INFO : A1/two: Deleted 2025/11/29 02:25:07 INFO : S3 bucket rclone-test-fudikeq0mide: Bucket "rclone-test-fudikeq0mide" deleted 2025/11/29 02:25:08 DEBUG : S3 bucket rclone-test-fudikeq0mide: Purge remote 2025/11/29 02:25:08 DEBUG : Waiting for deletions to finish 2025/11/29 02:25:08 NOTICE: purge failed: directory not found --- PASS: TestPurge (3.66s) === RUN TestRmdirsNoLeaveRoot run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" 2025/11/29 02:25:10 INFO : A2: Making directory 2025/11/29 02:25:10 INFO : A1/B2: Making directory 2025/11/29 02:25:10 INFO : A1/B2/C2: Making directory 2025/11/29 02:25:10 INFO : A1/B1/C3: Making directory 2025/11/29 02:25:10 INFO : A3: Making directory 2025/11/29 02:25:10 INFO : A3/B3: Making directory 2025/11/29 02:25:10 INFO : A3/B3/C4: Making directory fstest.go:250: Filtering empty directory "A2" fstest.go:250: Filtering empty directory "A1/B2" fstest.go:250: Filtering empty directory "A1/B2/C2" fstest.go:250: Filtering empty directory "A1/B1/C3" fstest.go:250: Filtering empty directory "A3" fstest.go:250: Filtering empty directory "A3/B3" fstest.go:250: Filtering empty directory "A3/B3/C4" 2025/11/29 02:25:12 DEBUG : removing 1 level 3 directories 2025/11/29 02:25:12 INFO : A3/B3/C4: Removing directory fstest.go:250: Filtering empty directory "A2" fstest.go:250: Filtering empty directory "A1/B2" fstest.go:250: Filtering empty directory "A1/B2/C2" fstest.go:250: Filtering empty directory "A1/B1/C3" fstest.go:250: Filtering empty directory "A3" fstest.go:250: Filtering empty directory "A3/B3" 2025/11/29 02:25:14 DEBUG : removing 1 level 0 directories 2025/11/29 02:25:14 INFO : S3 bucket rclone-test-yexofaj6qosa: Removing directory 2025/11/29 02:25:14 INFO : S3 bucket rclone-test-yexofaj6qosa: Bucket "rclone-test-yexofaj6qosa" deleted --- PASS: TestRmdirsNoLeaveRoot (6.92s) === RUN TestRmdirsLeaveRoot run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" 2025/11/29 02:25:15 INFO : S3 bucket rclone-test-yexofaj6qosa: Bucket "rclone-test-yexofaj6qosa" created with ACL "" 2025/11/29 02:25:15 INFO : A1: Making directory 2025/11/29 02:25:15 INFO : A1/B1: Making directory 2025/11/29 02:25:15 INFO : A1/B1/C1: Making directory fstest.go:250: Filtering empty directory "A1" fstest.go:250: Filtering empty directory "A1/B1" fstest.go:250: Filtering empty directory "A1/B1/C1" fstest.go:250: Filtering empty directory "A1" --- PASS: TestRmdirsLeaveRoot (1.10s) === RUN TestRmdirsWithFilter run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" 2025/11/29 02:25:16 INFO : A1: Making directory 2025/11/29 02:25:16 INFO : A1/B1: Making directory 2025/11/29 02:25:16 INFO : A1/B1/C1: Making directory fstest.go:250: Filtering empty directory "A1" fstest.go:250: Filtering empty directory "A1/B1" fstest.go:250: Filtering empty directory "A1/B1/C1" fstest.go:250: Filtering empty directory "A1" --- PASS: TestRmdirsWithFilter (0.56s) === RUN TestCopyURL run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" 2025/11/29 02:25:17 DEBUG : filename.txt: File name found in url 2025/11/29 02:25:18 DEBUG : headerfilename.txt: filename found in Content-Disposition header. --- PASS: TestCopyURL (5.81s) === RUN TestCopyURLToWriter --- PASS: TestCopyURLToWriter (0.00s) === RUN TestMoveFile run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" 2025/11/29 02:25:22 DEBUG : file1: Need to transfer - File not found at Destination 2025/11/29 02:25:23 DEBUG : sub/file2: size = 14 OK 2025/11/29 02:25:23 DEBUG : file1: md5 = 0ef726ce9b1a7692357ff70dd321d595 OK 2025/11/29 02:25:23 INFO : file1: Copied (new) to: sub/file2 2025/11/29 02:25:23 INFO : file1: Deleted 2025/11/29 02:25:23 DEBUG : sub/file2: size = 14 OK 2025/11/29 02:25:23 DEBUG : file1: Size and modification time the same (differ by 0s, within tolerance 1ns) 2025/11/29 02:25:23 DEBUG : file1: Unchanged skipping 2025/11/29 02:25:23 INFO : file1: Deleted 2025/11/29 02:25:23 DEBUG : S3 bucket rclone-test-yexofaj6qosa: don't need to copy/move sub/file2, it is already at target location --- PASS: TestMoveFile (1.88s) === RUN TestMoveFileWithIgnoreExisting run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" 2025/11/29 02:25:24 DEBUG : file1: Need to transfer - File not found at Destination 2025/11/29 02:25:24 DEBUG : file1: size = 14 OK 2025/11/29 02:25:24 DEBUG : file1: md5 = 0ef726ce9b1a7692357ff70dd321d595 OK 2025/11/29 02:25:24 INFO : file1: Copied (new) 2025/11/29 02:25:24 INFO : file1: Deleted 2025/11/29 02:25:25 DEBUG : file1: Destination exists, skipping 2025/11/29 02:25:25 DEBUG : file1: Not removing source file as destination file exists and --ignore-existing is set --- PASS: TestMoveFileWithIgnoreExisting (1.41s) === RUN TestCaseInsensitiveMoveFile run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" --- PASS: TestCaseInsensitiveMoveFile (0.28s) === RUN TestCaseInsensitiveMoveFileDryRun run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" --- PASS: TestCaseInsensitiveMoveFileDryRun (0.22s) === RUN TestMoveFileBackupDir run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" 2025/11/29 02:25:27 DEBUG : Creating backend with remote "TestS3Wasabi:rclone-test-yexofaj6qosa/backup" 2025/11/29 02:25:27 DEBUG : dst/file1: size = 14 (Local file system at /tmp/rclone3326563316) 2025/11/29 02:25:27 DEBUG : dst/file1: size = 18 (S3 bucket rclone-test-yexofaj6qosa) 2025/11/29 02:25:27 DEBUG : dst/file1: Sizes differ 2025/11/29 02:25:28 INFO : S3 bucket rclone-test-yexofaj6qosa path backup: Bucket "rclone-test-yexofaj6qosa" created with ACL "" 2025/11/29 02:25:28 DEBUG : dst/file1: size = 18 OK 2025/11/29 02:25:28 DEBUG : dst/file1: md5 = 05164b153084ba910184c26e561a7c18 OK 2025/11/29 02:25:28 INFO : dst/file1: Copied (server-side copy) 2025/11/29 02:25:28 INFO : dst/file1: Deleted 2025/11/29 02:25:28 DEBUG : dst/file1: size = 14 OK 2025/11/29 02:25:28 DEBUG : dst/file1: md5 = 0ef726ce9b1a7692357ff70dd321d595 OK 2025/11/29 02:25:28 INFO : dst/file1: Copied (new) 2025/11/29 02:25:28 INFO : dst/file1: Deleted --- PASS: TestMoveFileBackupDir (3.15s) === RUN TestSameConfig --- PASS: TestSameConfig (0.00s) === RUN TestSame --- PASS: TestSame (0.00s) === RUN TestOverlappingFilterCheckWithoutFilter --- PASS: TestOverlappingFilterCheckWithoutFilter (0.00s) === RUN TestOverlappingFilterCheckWithFilter --- PASS: TestOverlappingFilterCheckWithFilter (0.00s) === RUN TestListFormat --- PASS: TestListFormat (0.00s) === RUN TestDirMove run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" 2025/11/29 02:25:31 INFO : A1/B2: Making directory 2025/11/29 02:25:31 INFO : A1/B1/C3: Making directory fstest.go:250: Filtering empty directory "A1/B2" fstest.go:250: Filtering empty directory "A1/B1/C3" 2025/11/29 02:25:32 DEBUG : A2/B1/three: size = 5 OK 2025/11/29 02:25:32 DEBUG : A1/B1/three: md5 = 35d6d33467aae9a2e3dccb4b6b027878 OK 2025/11/29 02:25:32 INFO : A1/B1/three: Copied (server-side copy) to: A2/B1/three 2025/11/29 02:25:32 DEBUG : A2/one: size = 3 OK 2025/11/29 02:25:32 DEBUG : A1/one: md5 = f97c5d29941bfb1b2fdab0874906ab82 OK 2025/11/29 02:25:32 INFO : A1/one: Copied (server-side copy) to: A2/one 2025/11/29 02:25:32 INFO : A1/B1/three: Deleted 2025/11/29 02:25:32 DEBUG : A2/B1/C2/five: size = 4 OK 2025/11/29 02:25:32 DEBUG : A1/B1/C2/five: md5 = 30056e1cab7a61d256fc8edd970d14f5 OK 2025/11/29 02:25:32 INFO : A1/B1/C2/five: Copied (server-side copy) to: A2/B1/C2/five 2025/11/29 02:25:32 INFO : A1/one: Deleted 2025/11/29 02:25:33 INFO : A1/B1/C2/five: Deleted 2025/11/29 02:25:33 DEBUG : A2/B1/C1/four: size = 4 OK 2025/11/29 02:25:33 DEBUG : A1/B1/C1/four: md5 = 8cbad96aced40b3838dd9f07f6ef5772 OK 2025/11/29 02:25:33 INFO : A1/B1/C1/four: Copied (server-side copy) to: A2/B1/C1/four 2025/11/29 02:25:33 DEBUG : A2/two: size = 3 OK 2025/11/29 02:25:33 DEBUG : A1/two: md5 = b8a9f715dbb64fd5c56e7783c6820a61 OK 2025/11/29 02:25:33 INFO : A1/two: Copied (server-side copy) to: A2/two 2025/11/29 02:25:33 INFO : A1/B1/C1/four: Deleted 2025/11/29 02:25:33 INFO : A1/two: Deleted fstest.go:250: Filtering empty directory "A2/B2" fstest.go:250: Filtering empty directory "A2/B1/C3" 2025/11/29 02:25:34 DEBUG : A3/B1/C1/four: size = 4 OK 2025/11/29 02:25:34 DEBUG : A2/B1/C1/four: md5 = 8cbad96aced40b3838dd9f07f6ef5772 OK 2025/11/29 02:25:34 INFO : A2/B1/C1/four: Copied (server-side copy) to: A3/B1/C1/four 2025/11/29 02:25:34 DEBUG : A3/B1/C2/five: size = 4 OK 2025/11/29 02:25:34 DEBUG : A2/B1/C2/five: md5 = 30056e1cab7a61d256fc8edd970d14f5 OK 2025/11/29 02:25:34 INFO : A2/B1/C2/five: Copied (server-side copy) to: A3/B1/C2/five 2025/11/29 02:25:34 DEBUG : A3/two: size = 3 OK 2025/11/29 02:25:34 DEBUG : A2/two: md5 = b8a9f715dbb64fd5c56e7783c6820a61 OK 2025/11/29 02:25:34 INFO : A2/two: Copied (server-side copy) to: A3/two 2025/11/29 02:25:34 INFO : A2/B1/C2/five: Deleted 2025/11/29 02:25:34 INFO : A2/B1/C1/four: Deleted 2025/11/29 02:25:34 INFO : A2/two: Deleted 2025/11/29 02:25:34 DEBUG : A3/one: size = 3 OK 2025/11/29 02:25:34 DEBUG : A2/one: md5 = f97c5d29941bfb1b2fdab0874906ab82 OK 2025/11/29 02:25:34 INFO : A2/one: Copied (server-side copy) to: A3/one 2025/11/29 02:25:35 INFO : A2/one: Deleted 2025/11/29 02:25:37 DEBUG : A3/B1/three: size = 5 OK 2025/11/29 02:25:37 DEBUG : A2/B1/three: md5 = 35d6d33467aae9a2e3dccb4b6b027878 OK 2025/11/29 02:25:37 INFO : A2/B1/three: Copied (server-side copy) to: A3/B1/three 2025/11/29 02:25:38 INFO : A2/B1/three: Deleted fstest.go:250: Filtering empty directory "A3/B2" fstest.go:250: Filtering empty directory "A3/B1/C3" 2025/11/29 02:25:38 INFO : S3 bucket rclone-test-yexofaj6qosa: Can't DirMove - falling back to file moves: can't move directory - incompatible remotes 2025/11/29 02:25:39 DEBUG : A4/B1/C2/five: size = 4 OK 2025/11/29 02:25:39 DEBUG : A3/B1/C2/five: md5 = 30056e1cab7a61d256fc8edd970d14f5 OK 2025/11/29 02:25:39 INFO : A3/B1/C2/five: Copied (server-side copy) to: A4/B1/C2/five 2025/11/29 02:25:39 DEBUG : A4/B1/C1/four: size = 4 OK 2025/11/29 02:25:39 DEBUG : A3/B1/C1/four: md5 = 8cbad96aced40b3838dd9f07f6ef5772 OK 2025/11/29 02:25:39 INFO : A3/B1/C1/four: Copied (server-side copy) to: A4/B1/C1/four 2025/11/29 02:25:39 DEBUG : A4/one: size = 3 OK 2025/11/29 02:25:39 DEBUG : A3/one: md5 = f97c5d29941bfb1b2fdab0874906ab82 OK 2025/11/29 02:25:39 INFO : A3/one: Copied (server-side copy) to: A4/one 2025/11/29 02:25:39 DEBUG : A4/B1/three: size = 5 OK 2025/11/29 02:25:39 DEBUG : A3/B1/three: md5 = 35d6d33467aae9a2e3dccb4b6b027878 OK 2025/11/29 02:25:39 INFO : A3/B1/three: Copied (server-side copy) to: A4/B1/three 2025/11/29 02:25:39 INFO : A3/B1/C2/five: Deleted 2025/11/29 02:25:39 DEBUG : A4/two: size = 3 OK 2025/11/29 02:25:39 DEBUG : A3/two: md5 = b8a9f715dbb64fd5c56e7783c6820a61 OK 2025/11/29 02:25:39 INFO : A3/two: Copied (server-side copy) to: A4/two 2025/11/29 02:25:39 INFO : A3/B1/C1/four: Deleted 2025/11/29 02:25:39 INFO : A3/B1/three: Deleted 2025/11/29 02:25:39 INFO : A3/two: Deleted 2025/11/29 02:25:39 INFO : A3/one: Deleted fstest.go:250: Filtering empty directory "A4/B2" fstest.go:250: Filtering empty directory "A4/B1/C3" --- PASS: TestDirMove (11.85s) === RUN TestGetFsInfo run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" --- PASS: TestGetFsInfo (0.25s) === RUN TestRcat === RUN TestRcat/withChecksum=false,ignoreChecksum=false run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" 2025/11/29 02:25:41 DEBUG : S3 bucket rclone-test-yexofaj6qosa: File to upload is small (34 bytes), uploading instead of streaming 2025/11/29 02:25:42 DEBUG : no_checksum_small_file_from_pipe: size = 34 OK 2025/11/29 02:25:42 DEBUG : no_checksum_small_file_from_pipe: md5 = 4c762bc6ec18f21b23fcae426c7863b5 OK 2025/11/29 02:25:42 DEBUG : no_checksum_small_file_from_pipe: Size and md5 of src and dst objects identical 2025/11/29 02:25:42 NOTICE: S3 bucket rclone-test-yexofaj6qosa: Streaming uploads using chunk size 5Mi will have maximum file size of 48.828Gi 2025/11/29 02:25:42 DEBUG : no_checksum_big_file_from_pipe: open chunk writer: started multipart upload: ltTaziF8LIgabQ0vwG9u02KiF75oThjSRM8BOMMKEYgZEpt161BWJ1yefVdmyheU6ocvXsQwbAo20uAZ35s6EjFQ_1qsaJXtVTXiu5aZoe7vrGjhUPk5BwdLjOZ8EhIe 2025/11/29 02:25:42 DEBUG : no_checksum_big_file_from_pipe: multipart upload: starting chunk 0 size 100.001Ki offset 0/off 2025/11/29 02:25:42 DEBUG : no_checksum_big_file_from_pipe: multipart upload wrote chunk 1 with 102401 bytes and etag "fffc7956ba9a7b58a63c01b6ce1ddc45" 2025/11/29 02:25:42 DEBUG : no_checksum_big_file_from_pipe: multipart upload "ltTaziF8LIgabQ0vwG9u02KiF75oThjSRM8BOMMKEYgZEpt161BWJ1yefVdmyheU6ocvXsQwbAo20uAZ35s6EjFQ_1qsaJXtVTXiu5aZoe7vrGjhUPk5BwdLjOZ8EhIe" finished 2025/11/29 02:25:42 DEBUG : no_checksum_big_file_from_pipe: Multipart upload Etag: bbeee02c608c6e85736b35e536fba719-1 OK 2025/11/29 02:25:42 DEBUG : no_checksum_big_file_from_pipe: size = 102401 OK 2025/11/29 02:25:42 DEBUG : no_checksum_big_file_from_pipe: Dst hash empty - aborting Src hash check 2025/11/29 02:25:42 DEBUG : no_checksum_big_file_from_pipe: Size of src and dst objects identical === RUN TestRcat/withChecksum=true,ignoreChecksum=false run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" 2025/11/29 02:25:43 DEBUG : S3 bucket rclone-test-yexofaj6qosa: File to upload is small (34 bytes), uploading instead of streaming 2025/11/29 02:25:44 DEBUG : with_checksum_small_file_from_pipe: size = 34 OK 2025/11/29 02:25:44 DEBUG : with_checksum_small_file_from_pipe: md5 = 4c762bc6ec18f21b23fcae426c7863b5 OK 2025/11/29 02:25:44 DEBUG : with_checksum_small_file_from_pipe: Size and md5 of src and dst objects identical 2025/11/29 02:25:44 DEBUG : with_checksum_big_file_from_pipe: open chunk writer: started multipart upload: vkt9t1brqga_9Z3l-1Znnr3euvDRcCT3tKxAPsWDwXyL_HwlLrx_eXHSYu4c1hDrezM4BG7iAuXiZOXHijkHDTeO852YW0e_IOofm3vIfwJ3MpiSs4jaItHBXAkDxeve 2025/11/29 02:25:44 DEBUG : with_checksum_big_file_from_pipe: multipart upload: starting chunk 0 size 100.001Ki offset 0/off 2025/11/29 02:25:44 DEBUG : with_checksum_big_file_from_pipe: multipart upload wrote chunk 1 with 102401 bytes and etag "fffc7956ba9a7b58a63c01b6ce1ddc45" 2025/11/29 02:25:44 DEBUG : with_checksum_big_file_from_pipe: multipart upload "vkt9t1brqga_9Z3l-1Znnr3euvDRcCT3tKxAPsWDwXyL_HwlLrx_eXHSYu4c1hDrezM4BG7iAuXiZOXHijkHDTeO852YW0e_IOofm3vIfwJ3MpiSs4jaItHBXAkDxeve" finished 2025/11/29 02:25:44 DEBUG : with_checksum_big_file_from_pipe: Multipart upload Etag: bbeee02c608c6e85736b35e536fba719-1 OK 2025/11/29 02:25:44 DEBUG : with_checksum_big_file_from_pipe: size = 102401 OK 2025/11/29 02:25:44 DEBUG : with_checksum_big_file_from_pipe: Dst hash empty - aborting Src hash check 2025/11/29 02:25:44 DEBUG : with_checksum_big_file_from_pipe: Size of src and dst objects identical === RUN TestRcat/withChecksum=false,ignoreChecksum=true run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" 2025/11/29 02:25:45 DEBUG : S3 bucket rclone-test-yexofaj6qosa: File to upload is small (34 bytes), uploading instead of streaming 2025/11/29 02:25:46 DEBUG : ignore_checksum_small_file_from_pipe: size = 34 OK 2025/11/29 02:25:46 DEBUG : ignore_checksum_small_file_from_pipe: Size and modification time the same (differ by 0s, within tolerance 1ns) 2025/11/29 02:25:46 DEBUG : ignore_checksum_big_file_from_pipe: open chunk writer: started multipart upload: BU8PUqGXzJyrHq_oYI3ZyysxPCIibOAL6mLVaGw8dVO4U3e4n8rsDB6qRt8n5xGNjXnJq9bA5JsPvrQYXVcxpf04be33OSWP7obcRSnnLfnNJaTs-ucJvKi9qUMWzcjC 2025/11/29 02:25:46 DEBUG : ignore_checksum_big_file_from_pipe: multipart upload: starting chunk 0 size 100.001Ki offset 0/off 2025/11/29 02:25:46 DEBUG : ignore_checksum_big_file_from_pipe: multipart upload wrote chunk 1 with 102401 bytes and etag "fffc7956ba9a7b58a63c01b6ce1ddc45" 2025/11/29 02:25:46 DEBUG : ignore_checksum_big_file_from_pipe: multipart upload "BU8PUqGXzJyrHq_oYI3ZyysxPCIibOAL6mLVaGw8dVO4U3e4n8rsDB6qRt8n5xGNjXnJq9bA5JsPvrQYXVcxpf04be33OSWP7obcRSnnLfnNJaTs-ucJvKi9qUMWzcjC" finished 2025/11/29 02:25:46 DEBUG : ignore_checksum_big_file_from_pipe: Multipart upload Etag: bbeee02c608c6e85736b35e536fba719-1 OK 2025/11/29 02:25:46 DEBUG : ignore_checksum_big_file_from_pipe: size = 102401 OK 2025/11/29 02:25:46 DEBUG : ignore_checksum_big_file_from_pipe: Size and modification time the same (differ by 0s, within tolerance 1ns) === RUN TestRcat/withChecksum=true,ignoreChecksum=true run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" 2025/11/29 02:25:47 DEBUG : S3 bucket rclone-test-yexofaj6qosa: File to upload is small (34 bytes), uploading instead of streaming 2025/11/29 02:25:48 DEBUG : ignore_checksum_small_file_from_pipe: size = 34 OK 2025/11/29 02:25:48 DEBUG : ignore_checksum_small_file_from_pipe: Src hash empty - aborting Dst hash check 2025/11/29 02:25:48 DEBUG : ignore_checksum_small_file_from_pipe: Size of src and dst objects identical 2025/11/29 02:25:48 DEBUG : ignore_checksum_big_file_from_pipe: open chunk writer: started multipart upload: s8vgGQ8OTp4OmJ-giZF8orLpJFIAo0jUrB9frnwEzChxgCn9lD5E9TrbW86OMJr-paCrsDqJEX_JUiPk1ZkUTFrRwg2B6aBZTKTZuhyE2Vyp9bjnCs0hwEOoYAc6kEmr 2025/11/29 02:25:48 DEBUG : ignore_checksum_big_file_from_pipe: multipart upload: starting chunk 0 size 100.001Ki offset 0/off 2025/11/29 02:25:48 DEBUG : ignore_checksum_big_file_from_pipe: multipart upload wrote chunk 1 with 102401 bytes and etag "fffc7956ba9a7b58a63c01b6ce1ddc45" 2025/11/29 02:25:48 DEBUG : ignore_checksum_big_file_from_pipe: multipart upload "s8vgGQ8OTp4OmJ-giZF8orLpJFIAo0jUrB9frnwEzChxgCn9lD5E9TrbW86OMJr-paCrsDqJEX_JUiPk1ZkUTFrRwg2B6aBZTKTZuhyE2Vyp9bjnCs0hwEOoYAc6kEmr" finished 2025/11/29 02:25:48 DEBUG : ignore_checksum_big_file_from_pipe: Multipart upload Etag: bbeee02c608c6e85736b35e536fba719-1 OK 2025/11/29 02:25:48 DEBUG : ignore_checksum_big_file_from_pipe: size = 102401 OK 2025/11/29 02:25:48 DEBUG : ignore_checksum_big_file_from_pipe: Dst hash empty - aborting Src hash check 2025/11/29 02:25:48 DEBUG : ignore_checksum_big_file_from_pipe: Src hash empty - aborting Dst hash check 2025/11/29 02:25:48 DEBUG : ignore_checksum_big_file_from_pipe: Size of src and dst objects identical --- PASS: TestRcat (7.92s) --- PASS: TestRcat/withChecksum=false,ignoreChecksum=false (2.12s) --- PASS: TestRcat/withChecksum=true,ignoreChecksum=false (1.94s) --- PASS: TestRcat/withChecksum=false,ignoreChecksum=true (1.88s) --- PASS: TestRcat/withChecksum=true,ignoreChecksum=true (1.99s) === RUN TestRcatMetadata run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" === RUN TestRcatMetadata/Normal 2025/11/29 02:25:49 DEBUG : S3 bucket rclone-test-yexofaj6qosa: File to upload is small (48 bytes), uploading instead of streaming 2025/11/29 02:25:50 DEBUG : rcat_metadata: size = 48 OK 2025/11/29 02:25:50 DEBUG : rcat_metadata: md5 = dee10c33b9fe5e2ac4eb8ad8467b7063 OK 2025/11/29 02:25:50 DEBUG : rcat_metadata: Size and md5 of src and dst objects identical === RUN TestRcatMetadata/ViaDisk 2025/11/29 02:25:51 DEBUG : rcat_metadata_uploadcutoff0: open chunk writer: started multipart upload: booDx7qmCBTZoMTUBBw1FjPbU1n0KuUKzN9GHMHi_Rfi1z4k1UOeOk4sr8eqwoD5OquKSHEVitWYVFCsY4nkAuEjucibCEtHEGkalq8GYjVaUvP2r1gyeh5-I5OuNJeq 2025/11/29 02:25:51 DEBUG : rcat_metadata_uploadcutoff0: multipart upload: starting chunk 0 size 63 offset 0/off 2025/11/29 02:25:51 DEBUG : rcat_metadata_uploadcutoff0: multipart upload wrote chunk 1 with 63 bytes and etag "51ca8560f35b9b87370a65d72356b86c" 2025/11/29 02:25:51 DEBUG : rcat_metadata_uploadcutoff0: multipart upload "booDx7qmCBTZoMTUBBw1FjPbU1n0KuUKzN9GHMHi_Rfi1z4k1UOeOk4sr8eqwoD5OquKSHEVitWYVFCsY4nkAuEjucibCEtHEGkalq8GYjVaUvP2r1gyeh5-I5OuNJeq" finished 2025/11/29 02:25:51 DEBUG : rcat_metadata_uploadcutoff0: Multipart upload Etag: ed80e8f4a79a14666b4280dc1353888f-1 OK 2025/11/29 02:25:51 DEBUG : rcat_metadata_uploadcutoff0: size = 63 OK 2025/11/29 02:25:51 DEBUG : rcat_metadata_uploadcutoff0: Dst hash empty - aborting Src hash check 2025/11/29 02:25:51 DEBUG : rcat_metadata_uploadcutoff0: Size of src and dst objects identical --- PASS: TestRcatMetadata (2.53s) --- PASS: TestRcatMetadata/Normal (1.13s) --- PASS: TestRcatMetadata/ViaDisk (1.19s) === RUN TestRcatSize run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" 2025/11/29 02:25:52 DEBUG : S3 bucket rclone-test-yexofaj6qosa: File to upload is small (60 bytes), uploading instead of streaming 2025/11/29 02:25:52 DEBUG : potato2: size = 60 OK 2025/11/29 02:25:52 DEBUG : potato2: md5 = d6548b156ea68a4e003e786df99eee76 OK 2025/11/29 02:25:52 DEBUG : potato2: Size and md5 of src and dst objects identical --- PASS: TestRcatSize (1.44s) === RUN TestRcatSizeMetadata run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" 2025/11/29 02:25:53 DEBUG : S3 bucket rclone-test-yexofaj6qosa: File to upload is small (60 bytes), uploading instead of streaming 2025/11/29 02:25:54 DEBUG : potato2: size = 60 OK 2025/11/29 02:25:54 DEBUG : potato2: md5 = d6548b156ea68a4e003e786df99eee76 OK 2025/11/29 02:25:54 DEBUG : potato2: Size and md5 of src and dst objects identical --- PASS: TestRcatSizeMetadata (1.96s) === RUN TestTouchDir run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" 2025/11/29 02:25:58 DEBUG : S3 bucket rclone-test-yexofaj6qosa: Touching "sub dir/potato3" 2025/11/29 02:25:58 DEBUG : S3 bucket rclone-test-yexofaj6qosa: Touching "empty space" 2025/11/29 02:25:58 DEBUG : S3 bucket rclone-test-yexofaj6qosa: Touching "potato2" --- PASS: TestTouchDir (4.64s) === RUN TestMkdirMetadata run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" operations_test.go:1711: Skipping test as remote does not support MkdirMetadata --- SKIP: TestMkdirMetadata (0.23s) === RUN TestMkdirModTime run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" operations_test.go:1730: Skipping test as remote does not support DirSetModTime or MkdirMetadata --- SKIP: TestMkdirModTime (0.23s) === RUN TestCopyDirMetadata run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" operations_test.go:1751: Skipping test as remote does not support WriteDirMetadata or MkdirMetadata --- SKIP: TestCopyDirMetadata (0.22s) === RUN TestSetDirModTime run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" operations_test.go:1787: Skipping test as remote does not support DirSetModTime or WriteDirSetModTime --- SKIP: TestSetDirModTime (0.22s) === RUN TestDirsEqual run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" operations_test.go:1831: Skipping test as remote does not support WriteDirMetadata or MkdirMetadata --- SKIP: TestDirsEqual (0.22s) === RUN TestRemoveExisting run.go:185: Remote "S3 bucket rclone-test-yexofaj6qosa", Local "Local file system at /tmp/rclone3326563316", Modify Window "1ns" operations_test.go:1900: Skipping as remote can't Move --- SKIP: TestRemoveExisting (0.22s) === RUN TestRcAbout rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcAbout (0.00s) === RUN TestRcCleanup rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcCleanup (0.00s) === RUN TestRcCopyfile rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcCopyfile (0.00s) === RUN TestRcCopyurl rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcCopyurl (0.00s) === RUN TestRcDelete rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcDelete (0.00s) === RUN TestRcDeletefile rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcDeletefile (0.00s) === RUN TestRcList rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcList (0.00s) === RUN TestRcStat rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcStat (0.00s) === RUN TestRcSetTier rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcSetTier (0.00s) === RUN TestRcSetTierFile rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcSetTierFile (0.00s) === RUN TestRcMkdir rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcMkdir (0.00s) === RUN TestRcMovefile rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcMovefile (0.00s) === RUN TestRcPurge rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcPurge (0.00s) === RUN TestRcRmdir rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcRmdir (0.00s) === RUN TestRcRmdirs rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcRmdirs (0.00s) === RUN TestRcSize rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcSize (0.00s) === RUN TestRcPublicLink rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcPublicLink (0.00s) === RUN TestRcFsInfo rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcFsInfo (0.00s) === RUN TestUploadFile rc_test.go:30: Skipping test on non local remote --- SKIP: TestUploadFile (0.00s) === RUN TestRcCommand rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcCommand (0.00s) === RUN TestRcDu rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcDu (0.00s) === RUN TestRcCheck rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcCheck (0.00s) === RUN TestRcHashsum rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcHashsum (0.00s) === RUN TestRcHashsumFile rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcHashsumFile (0.00s) PASS 2025/11/29 02:26:01 DEBUG : S3 bucket rclone-test-yexofaj6qosa: Purge remote 2025/11/29 02:26:01 DEBUG : S3 bucket rclone-test-yexofaj6qosa: bucket is versioned: false 2025/11/29 02:26:01 DEBUG : Waiting for deletions to finish 2025/11/29 02:26:02 INFO : S3 bucket rclone-test-yexofaj6qosa: Bucket "rclone-test-yexofaj6qosa" deleted "./operations.test -test.v -test.timeout 1h0m0s -remote TestS3Wasabi: -verbose" - Finished OK in 4m5.658686006s (try 1/5)