"./vfs.test -test.v -test.timeout 1h0m0s -remote TestPremiumizeMe: -verbose -test.run '^(TestDirMkdirSub|TestReadFileHandleReadAt)$'" - Starting (try 3/5)
2026/10/04 02:19:08 DEBUG : Creating backend with remote "TestPremiumizeMe:rclone-test-rubevec8keye"
2026/10/04 02:19:08 DEBUG : Using config file from "/home/rclone/.rclone.conf"
2026/10/04 02:19:08 DEBUG : Creating backend with remote "/tmp/rclone374061148"
=== RUN   TestDirMkdirSub
    run.go:198: Remote "premiumize.me root 'rclone-test-rubevec8keye'", Local "Local file system at /tmp/rclone374061148", Modify Window "876000h0m0s"
2026/10/04 02:19:08 INFO  : premiumize.me root 'rclone-test-rubevec8keye': poll-interval is not supported by this remote
2026/10/04 02:19:08 NOTICE: premiumize.me root 'rclone-test-rubevec8keye': --vfs-cache-mode writes or full is recommended for this remote as it can't stream
2026/10/04 02:19:09 DEBUG : dir: Added virtual directory entry vAddDir: "sub"
2026/10/04 02:19:10 DEBUG : dir/sub: Added virtual directory entry vAddDir: "subsub"
2026/10/04 02:19:10 DEBUG : WaitForWriters: timeout=30s
2026/10/04 02:19:10 DEBUG : dir/sub/subsub: Looking for writers
2026/10/04 02:19:10 DEBUG : dir/sub: Looking for writers
2026/10/04 02:19:10 DEBUG : subsub: reading active writers
2026/10/04 02:19:10 DEBUG : dir: Looking for writers
2026/10/04 02:19:10 DEBUG : file1: reading active writers
2026/10/04 02:19:10 DEBUG : sub: reading active writers
2026/10/04 02:19:10 DEBUG : Looking for writers
2026/10/04 02:19:10 DEBUG : dir: reading active writers
2026/10/04 02:19:10 DEBUG : >WaitForWriters: 
--- PASS: TestDirMkdirSub (2.04s)
=== RUN   TestReadFileHandleReadAt
    run.go:198: Remote "premiumize.me root 'rclone-test-rubevec8keye'", Local "Local file system at /tmp/rclone374061148", Modify Window "876000h0m0s"
2026/10/04 02:19:11 INFO  : premiumize.me root 'rclone-test-rubevec8keye': poll-interval is not supported by this remote
2026/10/04 02:19:11 NOTICE: premiumize.me root 'rclone-test-rubevec8keye': --vfs-cache-mode writes or full is recommended for this remote as it can't stream
2026/10/04 02:19:11 DEBUG : dir/file1: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx
2026/10/04 02:19:11 DEBUG : dir/file1: Open: flags=O_RDONLY
2026/10/04 02:19:11 DEBUG : dir/file1: >Open: fd=dir/file1 (r), err=<nil>
2026/10/04 02:19:11 DEBUG : dir/file1: >OpenFile: fd=dir/file1 (r), err=<nil>
2026/10/04 02:19:11 DEBUG : dir/file1: ChunkedReader.openRange at 0 length 134217728
2026/10/04 02:19:12 DEBUG : dir/file1: ChunkedReader.Read at 0 length 1 chunkOffset 0 chunkSize 134217728
2026/10/04 02:19:12 DEBUG : dir/file1: waiting for in-sequence read to 5 for 20ms
2026/10/04 02:19:12 DEBUG : dir/file1: aborting in-sequence read wait, off=5
2026/10/04 02:19:12 DEBUG : dir/file1: failed to wait for in-sequence read to 5
2026/10/04 02:19:12 DEBUG : dir/file1: ReadFileHandle.seek from 1 to 5 (fs.RangeSeeker)
2026/10/04 02:19:12 DEBUG : dir/file1: ChunkedReader.RangeSeek from 1 to 5 length -1
2026/10/04 02:19:12 DEBUG : dir/file1: ChunkedReader.Read at -1 length 1 chunkOffset 5 chunkSize 134217728
2026/10/04 02:19:12 DEBUG : dir/file1: ChunkedReader.openRange at 5 length 134217728
2026/10/04 02:19:12 DEBUG : dir/file1: ReadFileHandle.seek from 6 to 1 (fs.RangeSeeker)
2026/10/04 02:19:12 DEBUG : dir/file1: ChunkedReader.RangeSeek from 6 to 1 length -1
2026/10/04 02:19:12 DEBUG : dir/file1: ChunkedReader.Read at -1 length 1 chunkOffset 1 chunkSize 134217728
2026/10/04 02:19:12 DEBUG : dir/file1: ChunkedReader.openRange at 1 length 134217728
2026/10/04 02:19:12 DEBUG : dir/file1: waiting for in-sequence read to 10 for 20ms
2026/10/04 02:19:12 DEBUG : dir/file1: aborting in-sequence read wait, off=10
2026/10/04 02:19:12 DEBUG : dir/file1: failed to wait for in-sequence read to 10
2026/10/04 02:19:12 DEBUG : dir/file1: ReadFileHandle.seek from 2 to 10 (fs.RangeSeeker)
2026/10/04 02:19:12 DEBUG : dir/file1: ChunkedReader.RangeSeek from 2 to 10 length -1
2026/10/04 02:19:12 DEBUG : dir/file1: ChunkedReader.Read at -1 length 6 chunkOffset 10 chunkSize 134217728
2026/10/04 02:19:12 DEBUG : dir/file1: ChunkedReader.openRange at 10 length 134217728
2026/10/04 02:19:12 DEBUG : dir/file1: ReadFileHandle.seek from 16 to 10 (fs.RangeSeeker)
2026/10/04 02:19:12 DEBUG : dir/file1: ChunkedReader.RangeSeek from 16 to 10 length -1
2026/10/04 02:19:12 DEBUG : dir/file1: ChunkedReader.Read at -1 length 256 chunkOffset 10 chunkSize 134217728
2026/10/04 02:19:12 DEBUG : dir/file1: ChunkedReader.openRange at 10 length 134217728
2026/10/04 02:19:12 DEBUG : dir/file1: waiting for in-sequence read to 100 for 20ms
2026/10/04 02:19:12 DEBUG : dir/file1: aborting in-sequence read wait, off=100
2026/10/04 02:19:12 DEBUG : dir/file1: failed to wait for in-sequence read to 100
2026/10/04 02:19:12 DEBUG : dir/file1: ReadFileHandle.Read attempt to read beyond end of file: 100 > 16
2026/10/04 02:19:12 DEBUG : dir/file1: waiting for in-sequence read to 100 for 20ms
2026/10/04 02:19:12 DEBUG : dir/file1: aborting in-sequence read wait, off=100
2026/10/04 02:19:12 DEBUG : dir/file1: failed to wait for in-sequence read to 100
2026/10/04 02:19:12 ERROR : dir/file1: ReadFileHandle.Read error: Bad file descriptor
2026/10/04 02:19:12 DEBUG : WaitForWriters: timeout=30s
2026/10/04 02:19:12 DEBUG : dir: Looking for writers
2026/10/04 02:19:12 DEBUG : file1: reading active writers
2026/10/04 02:19:12 DEBUG : Looking for writers
2026/10/04 02:19:12 DEBUG : dir: reading active writers
2026/10/04 02:19:12 DEBUG : >WaitForWriters: 
--- PASS: TestReadFileHandleReadAt (1.70s)
PASS
2026/10/04 02:19:12 DEBUG : premiumize.me root 'rclone-test-rubevec8keye': Purge remote
"./vfs.test -test.v -test.timeout 1h0m0s -remote TestPremiumizeMe: -verbose -test.run '^(TestDirMkdirSub|TestReadFileHandleReadAt)$'" - Finished OK in 4.070440279s (try 3/5)