"./vfs.test -test.v -test.timeout 1h0m0s -remote TestPikPak: -verbose -test.run '^(TestFileReadAtNonZeroLength|TestZipLargeFiles)$'" - Starting (try 4/5) 2026/09/13 01:38:37 DEBUG : Creating backend with remote "TestPikPak:rclone-test-yadevac7kosi" 2026/09/13 01:38:37 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2026/09/13 01:38:38 DEBUG : Creating backend with remote "/tmp/rclone367826575" === RUN TestFileReadAtNonZeroLength run.go:198: Remote "PikPak root 'rclone-test-yadevac7kosi'", Local "Local file system at /tmp/rclone367826575", Modify Window "876000h0m0s" 2026/09/13 01:38:38 INFO : PikPak root 'rclone-test-yadevac7kosi': poll-interval is not supported by this remote 2026/09/13 01:38:38 NOTICE: PikPak root 'rclone-test-yadevac7kosi': --vfs-cache-mode writes or full is recommended for this remote as it can't stream 2026/09/13 01:38:38 DEBUG : file1: OpenFile: flags=O_WRONLY|O_CREATE, perm=-rwxrwxrwx 2026/09/13 01:38:38 DEBUG : file1: Open: flags=O_WRONLY|O_CREATE 2026/09/13 01:38:38 DEBUG : Added virtual directory entry vAddFile: "file1" 2026/09/13 01:38:38 DEBUG : file1: >Open: fd=file1 (w), err= 2026/09/13 01:38:38 DEBUG : file1: >OpenFile: fd=file1 (w), err= 2026/09/13 01:38:38 DEBUG : Added virtual directory entry vAddFile: "file1" 2026/09/13 01:38:38 DEBUG : PikPak root 'rclone-test-yadevac7kosi': File to upload is small (100 bytes), uploading instead of streaming 2026/09/13 01:38:39 DEBUG : file1: calculating gcid: failed to unwrap object from src: file1 2026/09/13 01:38:39 DEBUG : file1: gcid = 7a3f5c266d6c92fa37ce16b1cc234ed0c3dd3f9f 2026/09/13 01:38:41 DEBUG : pacer: low level retry 1/10 (error upload (upload) is still in PHASE_TYPE_PENDING) 2026/09/13 01:38:41 DEBUG : pacer: Rate limited, increasing sleep to 200ms 2026/09/13 01:38:41 DEBUG : pacer: low level retry 2/10 (error upload (upload) is still in PHASE_TYPE_PENDING) 2026/09/13 01:38:41 DEBUG : pacer: Rate limited, increasing sleep to 400ms 2026/09/13 01:38:42 DEBUG : pacer: low level retry 3/10 (error upload (upload) is still in PHASE_TYPE_PENDING) 2026/09/13 01:38:42 DEBUG : pacer: Rate limited, increasing sleep to 800ms 2026/09/13 01:38:42 DEBUG : pacer: low level retry 4/10 (error upload (upload) is still in PHASE_TYPE_PENDING) 2026/09/13 01:38:42 DEBUG : pacer: Rate limited, increasing sleep to 1.6s 2026/09/13 01:38:43 DEBUG : pacer: low level retry 5/10 (error upload (upload) is still in PHASE_TYPE_PENDING) 2026/09/13 01:38:43 DEBUG : pacer: Rate limited, increasing sleep to 2s 2026/09/13 01:38:45 DEBUG : pacer: Reducing sleep to 1.5s 2026/09/13 01:38:45 DEBUG : file1: size = 100 OK 2026/09/13 01:38:45 DEBUG : file1: Dst hash empty - aborting Src hash check 2026/09/13 01:38:45 DEBUG : file1: Size of src and dst objects identical 2026/09/13 01:38:45 DEBUG : Added virtual directory entry vAddFile: "file1" 2026/09/13 01:38:45 DEBUG : file1: OpenFile: flags=O_RDONLY, perm=---------- 2026/09/13 01:38:45 DEBUG : file1: Open: flags=O_RDONLY 2026/09/13 01:38:45 DEBUG : file1: >Open: fd=file1 (r), err= 2026/09/13 01:38:45 DEBUG : file1: >OpenFile: fd=file1 (r), err= 2026/09/13 01:38:45 DEBUG : file1: ChunkedReader.openRange at 0 length 134217728 2026/09/13 01:38:47 DEBUG : pacer: Reducing sleep to 1.125s 2026/09/13 01:38:49 DEBUG : pacer: Reducing sleep to 843.75ms 2026/09/13 01:38:49 DEBUG : file1: ChunkedReader.Read at 0 length 1024 chunkOffset 0 chunkSize 134217728 2026/09/13 01:38:49 DEBUG : WaitForWriters: timeout=30s 2026/09/13 01:38:49 DEBUG : Looking for writers 2026/09/13 01:38:49 DEBUG : file1: reading active writers 2026/09/13 01:38:49 DEBUG : >WaitForWriters: 2026/09/13 01:38:49 DEBUG : pacer: Reducing sleep to 632.8125ms 2026/09/13 01:38:50 DEBUG : pacer: Reducing sleep to 474.609375ms 2026/09/13 01:38:51 DEBUG : pacer: Reducing sleep to 355.957031ms 2026/09/13 01:38:51 DEBUG : pacer: Reducing sleep to 266.967773ms --- PASS: TestFileReadAtNonZeroLength (13.20s) === RUN TestZipLargeFiles run.go:198: Remote "PikPak root 'rclone-test-yadevac7kosi'", Local "Local file system at /tmp/rclone367826575", Modify Window "876000h0m0s" 2026/09/13 01:38:51 INFO : PikPak root 'rclone-test-yadevac7kosi': poll-interval is not supported by this remote 2026/09/13 01:38:51 NOTICE: PikPak root 'rclone-test-yadevac7kosi': --vfs-cache-mode writes or full is recommended for this remote as it can't stream 2026/09/13 01:38:52 DEBUG : pacer: Reducing sleep to 200.225829ms 2026/09/13 01:38:52 DEBUG : pacer: Reducing sleep to 150.169371ms 2026/09/13 01:38:52 DEBUG : pacer: Reducing sleep to 112.627028ms 2026/09/13 01:38:52 DEBUG : bigdir/big.bin: calculating gcid: failed to unwrap object from src: bigdir/big.bin 2026/09/13 01:38:52 DEBUG : bigdir/big.bin: gcid = 24e86ff366bb88662b63078e92033670bd5b8806 2026/09/13 01:38:53 DEBUG : pacer: Reducing sleep to 100ms 2026/09/13 01:38:56 DEBUG : pacer: low level retry 1/10 (error upload (upload) is still in PHASE_TYPE_PENDING) 2026/09/13 01:38:56 DEBUG : pacer: Rate limited, increasing sleep to 200ms 2026/09/13 01:38:56 DEBUG : pacer: low level retry 2/10 (error upload (upload) is still in PHASE_TYPE_PENDING) 2026/09/13 01:38:56 DEBUG : pacer: Rate limited, increasing sleep to 400ms 2026/09/13 01:38:56 DEBUG : pacer: low level retry 3/10 (error upload (upload) is still in PHASE_TYPE_PENDING) 2026/09/13 01:38:56 DEBUG : pacer: Rate limited, increasing sleep to 800ms 2026/09/13 01:38:57 DEBUG : pacer: low level retry 4/10 (error upload (upload) is still in PHASE_TYPE_PENDING) 2026/09/13 01:38:57 DEBUG : pacer: Rate limited, increasing sleep to 1.6s 2026/09/13 01:38:57 DEBUG : pacer: low level retry 5/10 (error upload (upload) is still in PHASE_TYPE_PENDING) 2026/09/13 01:38:57 DEBUG : pacer: Rate limited, increasing sleep to 2s 2026/09/13 01:38:59 DEBUG : pacer: low level retry 6/10 (error upload (upload) is still in PHASE_TYPE_PENDING) 2026/09/13 01:39:01 DEBUG : pacer: low level retry 7/10 (error upload (upload) is still in PHASE_TYPE_PENDING) 2026/09/13 01:39:04 DEBUG : Saving config "captcha_token" in section "TestPikPak" of the config file 2026/09/13 01:39:04 DEBUG : pacer: low level retry 8/10 (error upload (upload) is still in PHASE_TYPE_PENDING) 2026/09/13 01:39:05 DEBUG : pacer: low level retry 9/10 (error upload (upload) is still in PHASE_TYPE_PENDING) 2026/09/13 01:39:07 DEBUG : pacer: low level retry 10/10 (error upload (upload) is still in PHASE_TYPE_PENDING) 2026/09/13 01:39:07 DEBUG : big.bin: canceling upload: can't verify the task is completed: &api.Task{Kind:"drive#task", ID:"VP1NPhDiDm8-XiamM1a_eGoWo2", Name:"upload", Type:"upload", UserID:"ZB7KFqZKGnYUJW_K", Statuses:[]interface {}{}, StatusSize:0, Params:(*api.TaskParams)(0x116045d66780), FileID:"VP1NPhDODm8-XiamM1a_eGoTo2", FileName:"big.bin", FileSize:"5242880", Message:"Pending", CreatedTime:api.Time{wall:0x3a0e0f80, ext:63924860332, loc:(*time.Location)(0x1160463408c0)}, UpdatedTime:api.Time{wall:0x7a1200, ext:63924860333, loc:(*time.Location)(0x1160463408c0)}, ThirdTaskID:"", Phase:"PHASE_TYPE_PENDING", Progress:0, IconLink:"https://static.mypikpak.com/icons/other", Callback:"", ReferenceResource:interface {}(nil), Space:""} 2026/09/13 01:39:09 DEBUG : pacer: Reducing sleep to 1.5s 2026/09/13 01:39:11 DEBUG : pacer: Reducing sleep to 1.125s 2026/09/13 01:39:13 DEBUG : pacer: Reducing sleep to 843.75ms 2026/09/13 01:39:13 DEBUG : big.bin: waiting 500ms for the cancellation to be effective run.go:303: Failed to put "bigdir/big.bin" to "PikPak root 'rclone-test-yadevac7kosi'": can't verify the task is completed: &api.Task{Kind:"drive#task", ID:"VP1NPhDiDm8-XiamM1a_eGoWo2", Name:"upload", Type:"upload", UserID:"ZB7KFqZKGnYUJW_K", Statuses:[]interface {}{}, StatusSize:0, Params:(*api.TaskParams)(0x116045d66780), FileID:"VP1NPhDODm8-XiamM1a_eGoTo2", FileName:"big.bin", FileSize:"5242880", Message:"Pending", CreatedTime:api.Time{wall:0x3a0e0f80, ext:63924860332, loc:(*time.Location)(0x1160463408c0)}, UpdatedTime:api.Time{wall:0x7a1200, ext:63924860333, loc:(*time.Location)(0x1160463408c0)}, ThirdTaskID:"", Phase:"PHASE_TYPE_PENDING", Progress:0, IconLink:"https://static.mypikpak.com/icons/other", Callback:"", ReferenceResource:interface {}(nil), Space:""} 2026/09/13 01:39:13 DEBUG : WaitForWriters: timeout=30s 2026/09/13 01:39:13 DEBUG : Looking for writers 2026/09/13 01:39:13 DEBUG : >WaitForWriters: 2026/09/13 01:39:14 DEBUG : pacer: Reducing sleep to 632.8125ms 2026/09/13 01:39:14 DEBUG : pacer: Reducing sleep to 474.609375ms 2026/09/13 01:39:15 DEBUG : pacer: Reducing sleep to 355.957031ms 2026/09/13 01:39:16 DEBUG : pacer: Reducing sleep to 266.967773ms 2026/09/13 01:39:16 DEBUG : pacer: Reducing sleep to 200.225829ms 2026/09/13 01:39:17 DEBUG : pacer: Reducing sleep to 150.169371ms --- FAIL: TestZipLargeFiles (25.39s) FAIL 2026/09/13 01:39:17 DEBUG : PikPak root 'rclone-test-yadevac7kosi': Purge remote 2026/09/13 01:39:17 DEBUG : pacer: Reducing sleep to 112.627028ms 2026/09/13 01:39:18 DEBUG : pacer: Reducing sleep to 100ms "./vfs.test -test.v -test.timeout 1h0m0s -remote TestPikPak: -verbose -test.run '^(TestFileReadAtNonZeroLength|TestZipLargeFiles)$'" - Finished ERROR in 41.093829505s (try 4/5): exit status 1: Failed [TestZipLargeFiles]