"./vfs.test -test.v -test.timeout 1h0m0s -remote TestPikPak: -verbose -test.run '^(TestFileReadAtNonZeroLength|TestZipLargeFiles)$'" - Starting (try 3/5) 2026/09/13 01:37:46 DEBUG : Creating backend with remote "TestPikPak:rclone-test-zupuger8vugu" 2026/09/13 01:37:46 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2026/09/13 01:37:47 DEBUG : Creating backend with remote "/tmp/rclone3408862988" === RUN TestFileReadAtNonZeroLength run.go:198: Remote "PikPak root 'rclone-test-zupuger8vugu'", Local "Local file system at /tmp/rclone3408862988", Modify Window "876000h0m0s" 2026/09/13 01:37:47 INFO : PikPak root 'rclone-test-zupuger8vugu': poll-interval is not supported by this remote 2026/09/13 01:37:47 NOTICE: PikPak root 'rclone-test-zupuger8vugu': --vfs-cache-mode writes or full is recommended for this remote as it can't stream 2026/09/13 01:37:47 DEBUG : file1: OpenFile: flags=O_WRONLY|O_CREATE, perm=-rwxrwxrwx 2026/09/13 01:37:48 DEBUG : file1: Open: flags=O_WRONLY|O_CREATE 2026/09/13 01:37:48 DEBUG : Added virtual directory entry vAddFile: "file1" 2026/09/13 01:37:48 DEBUG : file1: >Open: fd=file1 (w), err= 2026/09/13 01:37:48 DEBUG : file1: >OpenFile: fd=file1 (w), err= 2026/09/13 01:37:48 DEBUG : Added virtual directory entry vAddFile: "file1" 2026/09/13 01:37:48 DEBUG : PikPak root 'rclone-test-zupuger8vugu': File to upload is small (100 bytes), uploading instead of streaming 2026/09/13 01:37:48 DEBUG : file1: calculating gcid: failed to unwrap object from src: file1 2026/09/13 01:37:48 DEBUG : file1: gcid = 6df138a0b2e470a2347c8113ea4b5655db81c45b 2026/09/13 01:37:50 DEBUG : pacer: low level retry 1/10 (error upload (upload) is still in PHASE_TYPE_PENDING) 2026/09/13 01:37:50 DEBUG : pacer: Rate limited, increasing sleep to 200ms 2026/09/13 01:37:51 DEBUG : pacer: low level retry 2/10 (error upload (upload) is still in PHASE_TYPE_PENDING) 2026/09/13 01:37:51 DEBUG : pacer: Rate limited, increasing sleep to 400ms 2026/09/13 01:37:51 DEBUG : pacer: low level retry 3/10 (error upload (upload) is still in PHASE_TYPE_PENDING) 2026/09/13 01:37:51 DEBUG : pacer: Rate limited, increasing sleep to 800ms 2026/09/13 01:37:51 DEBUG : pacer: low level retry 4/10 (error upload (upload) is still in PHASE_TYPE_PENDING) 2026/09/13 01:37:51 DEBUG : pacer: Rate limited, increasing sleep to 1.6s 2026/09/13 01:37:52 DEBUG : pacer: low level retry 5/10 (error upload (upload) is still in PHASE_TYPE_PENDING) 2026/09/13 01:37:52 DEBUG : pacer: Rate limited, increasing sleep to 2s 2026/09/13 01:37:54 DEBUG : pacer: low level retry 6/10 (error upload (upload) is still in PHASE_TYPE_PENDING) 2026/09/13 01:37:56 DEBUG : pacer: low level retry 7/10 (error upload (upload) is still in PHASE_TYPE_PENDING) 2026/09/13 01:37:58 DEBUG : pacer: low level retry 8/10 (error upload (upload) is still in PHASE_TYPE_PENDING) 2026/09/13 01:38:00 DEBUG : pacer: low level retry 9/10 (error upload (upload) is still in PHASE_TYPE_PENDING) 2026/09/13 01:38:02 DEBUG : pacer: low level retry 10/10 (error upload (upload) is still in PHASE_TYPE_PENDING) 2026/09/13 01:38:02 DEBUG : file1: canceling upload: can't verify the task is completed: &api.Task{Kind:"drive#task", ID:"VP1NPSefLWKF8yIV-b_d__A2o2", Name:"upload", Type:"upload", UserID:"ZB7KFqZKGnYUJW_K", Statuses:[]interface {}{}, StatusSize:0, Params:(*api.TaskParams)(0x1c6ee6177dc0), FileID:"VP1NPSeJLWKF8yIV-b_d__A0o2", FileName:"file1", FileSize:"100", Message:"Pending", CreatedTime:api.Time{wall:0xd87bec0, ext:63924860269, loc:(*time.Location)(0x1c6ee5bf9e30)}, UpdatedTime:api.Time{wall:0xe8b2500, ext:63924860269, loc:(*time.Location)(0x1c6ee5bf9e30)}, ThirdTaskID:"", Phase:"PHASE_TYPE_PENDING", Progress:0, IconLink:"https://static.mypikpak.com/icons/other", Callback:"", ReferenceResource:interface {}(nil), Space:""} 2026/09/13 01:38:04 DEBUG : pacer: Reducing sleep to 1.5s 2026/09/13 01:38:06 DEBUG : pacer: Reducing sleep to 1.125s 2026/09/13 01:38:07 DEBUG : pacer: Reducing sleep to 843.75ms 2026/09/13 01:38:07 DEBUG : file1: waiting 500ms for the cancellation to be effective 2026/09/13 01:38:08 ERROR : file1: WriteFileHandle.New Rcat failed: can't verify the task is completed: &api.Task{Kind:"drive#task", ID:"VP1NPSefLWKF8yIV-b_d__A2o2", Name:"upload", Type:"upload", UserID:"ZB7KFqZKGnYUJW_K", Statuses:[]interface {}{}, StatusSize:0, Params:(*api.TaskParams)(0x1c6ee6177dc0), FileID:"VP1NPSeJLWKF8yIV-b_d__A0o2", FileName:"file1", FileSize:"100", Message:"Pending", CreatedTime:api.Time{wall:0xd87bec0, ext:63924860269, loc:(*time.Location)(0x1c6ee5bf9e30)}, UpdatedTime:api.Time{wall:0xe8b2500, ext:63924860269, loc:(*time.Location)(0x1c6ee5bf9e30)}, ThirdTaskID:"", Phase:"PHASE_TYPE_PENDING", Progress:0, IconLink:"https://static.mypikpak.com/icons/other", Callback:"", ReferenceResource:interface {}(nil), Space:""} 2026/09/13 01:38:08 DEBUG : file1: Remove: 2026/09/13 01:38:08 DEBUG : Added virtual directory entry vDel: "file1" 2026/09/13 01:38:08 DEBUG : file1: >Remove: err= write_test.go:402: Error Trace: /home/rclone/go/src/github.com/rclone/rclone/vfs/write_test.go:402 /home/rclone/go/src/github.com/rclone/rclone/vfs/write_test.go:426 Error: Received unexpected error: can't verify the task is completed: &api.Task{Kind:"drive#task", ID:"VP1NPSefLWKF8yIV-b_d__A2o2", Name:"upload", Type:"upload", UserID:"ZB7KFqZKGnYUJW_K", Statuses:[]interface {}{}, StatusSize:0, Params:(*api.TaskParams)(0x1c6ee6177dc0), FileID:"VP1NPSeJLWKF8yIV-b_d__A0o2", FileName:"file1", FileSize:"100", Message:"Pending", CreatedTime:api.Time{wall:0xd87bec0, ext:63924860269, loc:(*time.Location)(0x1c6ee5bf9e30)}, UpdatedTime:api.Time{wall:0xe8b2500, ext:63924860269, loc:(*time.Location)(0x1c6ee5bf9e30)}, ThirdTaskID:"", Phase:"PHASE_TYPE_PENDING", Progress:0, IconLink:"https://static.mypikpak.com/icons/other", Callback:"", ReferenceResource:interface {}(nil), Space:""} Test: TestFileReadAtNonZeroLength 2026/09/13 01:38:08 DEBUG : file1: OpenFile: flags=O_RDONLY, perm=---------- 2026/09/13 01:38:08 DEBUG : file1: >OpenFile: fd=, err=file does not exist write_test.go:407: Error Trace: /home/rclone/go/src/github.com/rclone/rclone/vfs/write_test.go:407 /home/rclone/go/src/github.com/rclone/rclone/vfs/write_test.go:426 Error: Received unexpected error: file does not exist Test: TestFileReadAtNonZeroLength 2026/09/13 01:38:08 DEBUG : WaitForWriters: timeout=30s 2026/09/13 01:38:08 DEBUG : Looking for writers 2026/09/13 01:38:08 DEBUG : >WaitForWriters: 2026/09/13 01:38:08 DEBUG : pacer: Reducing sleep to 632.8125ms 2026/09/13 01:38:09 DEBUG : pacer: Reducing sleep to 474.609375ms --- FAIL: TestFileReadAtNonZeroLength (21.92s) === RUN TestZipLargeFiles run.go:198: Remote "PikPak root 'rclone-test-zupuger8vugu'", Local "Local file system at /tmp/rclone3408862988", Modify Window "876000h0m0s" 2026/09/13 01:38:09 INFO : PikPak root 'rclone-test-zupuger8vugu': poll-interval is not supported by this remote 2026/09/13 01:38:09 NOTICE: PikPak root 'rclone-test-zupuger8vugu': --vfs-cache-mode writes or full is recommended for this remote as it can't stream 2026/09/13 01:38:10 DEBUG : pacer: Reducing sleep to 355.957031ms 2026/09/13 01:38:10 DEBUG : pacer: Reducing sleep to 266.967773ms 2026/09/13 01:38:11 DEBUG : pacer: Reducing sleep to 200.225829ms 2026/09/13 01:38:11 DEBUG : bigdir/big.bin: calculating gcid: failed to unwrap object from src: bigdir/big.bin 2026/09/13 01:38:11 DEBUG : bigdir/big.bin: gcid = 38901d7160a624a79176cf3f5f2a9f79ee13a067 2026/09/13 01:38:11 DEBUG : pacer: Reducing sleep to 150.169371ms 2026/09/13 01:38:13 DEBUG : pacer: Reducing sleep to 112.627028ms 2026/09/13 01:38:14 DEBUG : pacer: low level retry 1/10 (error upload (upload) is still in PHASE_TYPE_PENDING) 2026/09/13 01:38:14 DEBUG : pacer: Rate limited, increasing sleep to 225.254056ms 2026/09/13 01:38:14 DEBUG : pacer: low level retry 2/10 (error upload (upload) is still in PHASE_TYPE_PENDING) 2026/09/13 01:38:14 DEBUG : pacer: Rate limited, increasing sleep to 450.508112ms 2026/09/13 01:38:15 DEBUG : pacer: low level retry 3/10 (error upload (upload) is still in PHASE_TYPE_PENDING) 2026/09/13 01:38:15 DEBUG : pacer: Rate limited, increasing sleep to 901.016224ms 2026/09/13 01:38:15 DEBUG : pacer: low level retry 4/10 (error upload (upload) is still in PHASE_TYPE_PENDING) 2026/09/13 01:38:15 DEBUG : pacer: Rate limited, increasing sleep to 1.802032448s 2026/09/13 01:38:16 DEBUG : pacer: low level retry 5/10 (error upload (upload) is still in PHASE_TYPE_PENDING) 2026/09/13 01:38:16 DEBUG : pacer: Rate limited, increasing sleep to 2s 2026/09/13 01:38:18 DEBUG : pacer: low level retry 6/10 (error upload (upload) is still in PHASE_TYPE_PENDING) 2026/09/13 01:38:20 DEBUG : pacer: low level retry 7/10 (error upload (upload) is still in PHASE_TYPE_PENDING) 2026/09/13 01:38:22 DEBUG : pacer: low level retry 8/10 (error upload (upload) is still in PHASE_TYPE_PENDING) 2026/09/13 01:38:24 DEBUG : pacer: low level retry 9/10 (error upload (upload) is still in PHASE_TYPE_PENDING) 2026/09/13 01:38:26 DEBUG : pacer: low level retry 10/10 (error upload (upload) is still in PHASE_TYPE_PENDING) 2026/09/13 01:38:26 DEBUG : big.bin: canceling upload: can't verify the task is completed: &api.Task{Kind:"drive#task", ID:"VP1NPY5hGeoHV7oyj9HfVc2Xo2", Name:"upload", Type:"upload", UserID:"ZB7KFqZKGnYUJW_K", Statuses:[]interface {}{}, StatusSize:0, Params:(*api.TaskParams)(0x1c6ee6184f00), FileID:"VP1NPY5MGeoHV7oyj9HfVc2Uo2", FileName:"big.bin", FileSize:"5242880", Message:"Pending", CreatedTime:api.Time{wall:0x1ddca740, ext:63924860291, loc:(*time.Location)(0x1c6ee5bf9e30)}, UpdatedTime:api.Time{wall:0x1f6961c0, ext:63924860291, loc:(*time.Location)(0x1c6ee5bf9e30)}, ThirdTaskID:"", Phase:"PHASE_TYPE_PENDING", Progress:0, IconLink:"https://static.mypikpak.com/icons/other", Callback:"", ReferenceResource:interface {}(nil), Space:""} 2026/09/13 01:38:28 DEBUG : pacer: Reducing sleep to 1.5s 2026/09/13 01:38:30 DEBUG : pacer: Reducing sleep to 1.125s 2026/09/13 01:38:31 DEBUG : pacer: Reducing sleep to 843.75ms 2026/09/13 01:38:31 DEBUG : big.bin: waiting 500ms for the cancellation to be effective run.go:303: Failed to put "bigdir/big.bin" to "PikPak root 'rclone-test-zupuger8vugu'": can't verify the task is completed: &api.Task{Kind:"drive#task", ID:"VP1NPY5hGeoHV7oyj9HfVc2Xo2", Name:"upload", Type:"upload", UserID:"ZB7KFqZKGnYUJW_K", Statuses:[]interface {}{}, StatusSize:0, Params:(*api.TaskParams)(0x1c6ee6184f00), FileID:"VP1NPY5MGeoHV7oyj9HfVc2Uo2", FileName:"big.bin", FileSize:"5242880", Message:"Pending", CreatedTime:api.Time{wall:0x1ddca740, ext:63924860291, loc:(*time.Location)(0x1c6ee5bf9e30)}, UpdatedTime:api.Time{wall:0x1f6961c0, ext:63924860291, loc:(*time.Location)(0x1c6ee5bf9e30)}, ThirdTaskID:"", Phase:"PHASE_TYPE_PENDING", Progress:0, IconLink:"https://static.mypikpak.com/icons/other", Callback:"", ReferenceResource:interface {}(nil), Space:""} 2026/09/13 01:38:32 DEBUG : WaitForWriters: timeout=30s 2026/09/13 01:38:32 DEBUG : Looking for writers 2026/09/13 01:38:32 DEBUG : >WaitForWriters: 2026/09/13 01:38:33 DEBUG : pacer: Reducing sleep to 632.8125ms 2026/09/13 01:38:33 DEBUG : pacer: Reducing sleep to 474.609375ms 2026/09/13 01:38:34 DEBUG : pacer: Reducing sleep to 355.957031ms 2026/09/13 01:38:34 DEBUG : pacer: Reducing sleep to 266.967773ms 2026/09/13 01:38:35 DEBUG : pacer: Reducing sleep to 200.225829ms 2026/09/13 01:38:36 DEBUG : pacer: Reducing sleep to 150.169371ms --- FAIL: TestZipLargeFiles (26.29s) FAIL 2026/09/13 01:38:36 DEBUG : PikPak root 'rclone-test-zupuger8vugu': Purge remote 2026/09/13 01:38:36 DEBUG : pacer: Reducing sleep to 112.627028ms 2026/09/13 01:38:37 DEBUG : pacer: Reducing sleep to 100ms "./vfs.test -test.v -test.timeout 1h0m0s -remote TestPikPak: -verbose -test.run '^(TestFileReadAtNonZeroLength|TestZipLargeFiles)$'" - Finished ERROR in 50.772870021s (try 3/5): exit status 1: Failed [TestFileReadAtNonZeroLength TestZipLargeFiles]