"./vfs.test -test.v -test.timeout 1h0m0s -remote TestLinkbox: -verbose -test.run '^(TestFileOpenWrite|TestReadFileHandleReadAt|TestVFSMkdirAll|TestVFSStatParent)$|^TestFileRename$/^writes,forceCache=true$'" - Starting (try 2/5) 2026/08/18 02:24:10 DEBUG : Creating backend with remote "TestLinkbox:rclone-test-yovoyof6wari" 2026/08/18 02:24:10 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2026/08/18 02:24:10 DEBUG : Linkbox root 'rclone-test-yovoyof6wari': Using cached web token 2026/08/18 02:24:11 DEBUG : Creating backend with remote "/tmp/rclone3879910915" === RUN TestFileOpenWrite run.go:198: Remote "Linkbox root 'rclone-test-yovoyof6wari'", Local "Local file system at /tmp/rclone3879910915", Modify Window "876000h0m0s" 2026/08/18 02:24:11 INFO : Linkbox root 'rclone-test-yovoyof6wari': poll-interval is not supported by this remote 2026/08/18 02:24:11 NOTICE: Linkbox root 'rclone-test-yovoyof6wari': --vfs-cache-mode writes or full is recommended for this remote as it can't stream 2026/08/18 02:24:17 DEBUG : dir: Added virtual directory entry vAddFile: "file1" 2026/08/18 02:24:17 DEBUG : Linkbox root 'rclone-test-yovoyof6wari': File to upload is small (25 bytes), uploading instead of streaming 2026/08/18 02:24:18 DEBUG : dir/file1: Update: removing old file 2026/08/18 02:24:21 DEBUG : dir/file1: size = 25 OK 2026/08/18 02:24:21 NOTICE: Linkbox root 'rclone-test-yovoyof6wari': --checksum is in use but the source and destination have no hashes in common; falling back to --size-only 2026/08/18 02:24:21 DEBUG : dir/file1: Size of src and dst objects identical 2026/08/18 02:24:21 DEBUG : dir: Added virtual directory entry vAddFile: "file1" 2026/08/18 02:24:21 DEBUG : WaitForWriters: timeout=30s 2026/08/18 02:24:21 DEBUG : dir: Looking for writers 2026/08/18 02:24:21 DEBUG : file1: reading active writers 2026/08/18 02:24:21 DEBUG : Looking for writers 2026/08/18 02:24:21 DEBUG : dir: reading active writers 2026/08/18 02:24:21 DEBUG : >WaitForWriters: --- PASS: TestFileOpenWrite (12.77s) === RUN TestFileRename === RUN TestFileRename/writes,forceCache=true run.go:198: Remote "Linkbox root 'rclone-test-yovoyof6wari'", Local "Local file system at /tmp/rclone3879910915", Modify Window "876000h0m0s" 2026/08/18 02:24:24 INFO : Linkbox root 'rclone-test-yovoyof6wari': poll-interval is not supported by this remote 2026/08/18 02:24:24 DEBUG : Linkbox root 'rclone-test-yovoyof6wari': vfs cache: root is "/home/rclone/.cache/rclone" 2026/08/18 02:24:24 DEBUG : Linkbox root 'rclone-test-yovoyof6wari': vfs cache: data root is "/home/rclone/.cache/rclone/vfs/TestLinkbox/rclone-test-yovoyof6wari" 2026/08/18 02:24:24 DEBUG : Linkbox root 'rclone-test-yovoyof6wari': vfs cache: metadata root is "/home/rclone/.cache/rclone/vfsMeta/TestLinkbox/rclone-test-yovoyof6wari" 2026/08/18 02:24:24 DEBUG : Creating backend with remote ":local,encoding='Slash,Dot',links=false:/home/rclone/.cache/rclone/vfs/TestLinkbox/rclone-test-yovoyof6wari" 2026/08/18 02:24:24 DEBUG : :local: detected overridden config - adding "{8un-i}" suffix to name 2026/08/18 02:24:24 DEBUG : fs cache: renaming cache item ":local,encoding='Slash,Dot',links=false:/home/rclone/.cache/rclone/vfs/TestLinkbox/rclone-test-yovoyof6wari" to be canonical ":local{8un-i}:/home/rclone/.cache/rclone/vfs/TestLinkbox/rclone-test-yovoyof6wari" 2026/08/18 02:24:24 DEBUG : Creating backend with remote ":local,encoding='Slash,Dot',links=false:/home/rclone/.cache/rclone/vfsMeta/TestLinkbox/rclone-test-yovoyof6wari" 2026/08/18 02:24:24 DEBUG : :local: detected overridden config - adding "{8un-i}" suffix to name 2026/08/18 02:24:24 DEBUG : fs cache: renaming cache item ":local,encoding='Slash,Dot',links=false:/home/rclone/.cache/rclone/vfsMeta/TestLinkbox/rclone-test-yovoyof6wari" to be canonical ":local{8un-i}:/home/rclone/.cache/rclone/vfsMeta/TestLinkbox/rclone-test-yovoyof6wari" 2026/08/18 02:24:24 INFO : Linkbox root 'rclone-test-yovoyof6wari': vfs cache: cleaned: objects 0 (was 0) in use 0, to upload 0, uploading 0, total size 0 (was 0) file_test.go:305: skip as can't rename files 2026/08/18 02:24:28 DEBUG : WaitForWriters: timeout=30s 2026/08/18 02:24:28 DEBUG : dir: Looking for writers 2026/08/18 02:24:28 DEBUG : file1: reading active writers 2026/08/18 02:24:28 DEBUG : Looking for writers 2026/08/18 02:24:28 DEBUG : dir: reading active writers 2026/08/18 02:24:28 DEBUG : >WaitForWriters: 2026/08/18 02:24:28 DEBUG : Linkbox root 'rclone-test-yovoyof6wari': vfs cache: cleaner exiting 2026/08/18 02:24:29 DEBUG : pacer: low level retry 1/10 (error invalid character '<' looking for beginning of value) 2026/08/18 02:24:29 DEBUG : pacer: Rate limited, increasing sleep to 400ms 2026/08/18 02:24:29 DEBUG : pacer: low level retry 2/10 (error invalid character '<' looking for beginning of value) 2026/08/18 02:24:29 DEBUG : pacer: Rate limited, increasing sleep to 800ms 2026/08/18 02:24:29 DEBUG : pacer: low level retry 3/10 (error invalid character '<' looking for beginning of value) 2026/08/18 02:24:29 DEBUG : pacer: Rate limited, increasing sleep to 1.6s 2026/08/18 02:24:30 DEBUG : pacer: low level retry 4/10 (error invalid character '<' looking for beginning of value) 2026/08/18 02:24:30 DEBUG : pacer: Rate limited, increasing sleep to 2s 2026/08/18 02:24:32 DEBUG : pacer: low level retry 5/10 (error invalid character '<' looking for beginning of value) 2026/08/18 02:24:34 DEBUG : pacer: low level retry 6/10 (error invalid character '<' looking for beginning of value) 2026/08/18 02:24:36 DEBUG : pacer: low level retry 7/10 (error invalid character '<' looking for beginning of value) 2026/08/18 02:24:38 DEBUG : pacer: low level retry 8/10 (error invalid character '<' looking for beginning of value) 2026/08/18 02:24:40 DEBUG : pacer: low level retry 9/10 (error invalid character '<' looking for beginning of value) 2026/08/18 02:24:42 DEBUG : pacer: low level retry 10/10 (error invalid character '<' looking for beginning of value) run.go:172: removing file "dir/file1" failed - try 1/3: sleeping 1s: could not Remove: invalid character '<' looking for beginning of value 2026/08/18 02:24:44 DEBUG : pacer: low level retry 1/10 (error invalid character '<' looking for beginning of value) 2026/08/18 02:24:46 DEBUG : pacer: low level retry 2/10 (error invalid character '<' looking for beginning of value) 2026/08/18 02:24:48 DEBUG : pacer: low level retry 3/10 (error invalid character '<' looking for beginning of value) 2026/08/18 02:24:50 DEBUG : pacer: low level retry 4/10 (error invalid character '<' looking for beginning of value) 2026/08/18 02:24:53 DEBUG : pacer: Reducing sleep to 1.5s 2026/08/18 02:24:54 DEBUG : pacer: Reducing sleep to 1.125s 2026/08/18 02:24:57 DEBUG : pacer: Reducing sleep to 843.75ms 2026/08/18 02:24:57 DEBUG : pacer: Reducing sleep to 632.8125ms --- PASS: TestFileRename (32.73s) --- SKIP: TestFileRename/writes,forceCache=true (32.73s) === RUN TestReadFileHandleReadAt run.go:198: Remote "Linkbox root 'rclone-test-yovoyof6wari'", Local "Local file system at /tmp/rclone3879910915", Modify Window "876000h0m0s" 2026/08/18 02:24:57 INFO : Linkbox root 'rclone-test-yovoyof6wari': poll-interval is not supported by this remote 2026/08/18 02:24:57 NOTICE: Linkbox root 'rclone-test-yovoyof6wari': --vfs-cache-mode writes or full is recommended for this remote as it can't stream 2026/08/18 02:24:58 DEBUG : pacer: Reducing sleep to 474.609375ms 2026/08/18 02:24:59 DEBUG : pacer: Reducing sleep to 355.957031ms 2026/08/18 02:25:00 DEBUG : pacer: Reducing sleep to 266.967773ms 2026/08/18 02:25:00 DEBUG : pacer: Reducing sleep to 200.225829ms 2026/08/18 02:25:02 DEBUG : pacer: Reducing sleep to 200ms 2026/08/18 02:25:02 DEBUG : dir/file1: Trying to read object after upload: try again in 100ms (1/10) 2026/08/18 02:25:02 DEBUG : dir/file1: Trying to read object after upload: try again in 200ms (2/10) 2026/08/18 02:25:02 DEBUG : dir/file1: Trying to read object after upload: try again in 400ms (3/10) 2026/08/18 02:25:03 DEBUG : dir/file1: Trying to read object after upload: try again in 800ms (4/10) 2026/08/18 02:25:04 DEBUG : dir/file1: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx 2026/08/18 02:25:05 DEBUG : dir/file1: Open: flags=O_RDONLY 2026/08/18 02:25:05 DEBUG : dir/file1: >Open: fd=dir/file1 (r), err= 2026/08/18 02:25:05 DEBUG : dir/file1: >OpenFile: fd=dir/file1 (r), err= 2026/08/18 02:25:05 DEBUG : dir/file1: ChunkedReader.openRange at 0 length 134217728 2026/08/18 02:25:05 NOTICE: Time may be set wrong - time from "aht.nuplink3.net" is 1605h45m19.560836667s different from this computer 2026/08/18 02:25:05 DEBUG : dir/file1: ChunkedReader.Read at 0 length 1 chunkOffset 0 chunkSize 134217728 2026/08/18 02:25:05 DEBUG : dir/file1: waiting for in-sequence read to 5 for 20ms 2026/08/18 02:25:05 DEBUG : dir/file1: aborting in-sequence read wait, off=5 2026/08/18 02:25:05 DEBUG : dir/file1: failed to wait for in-sequence read to 5 2026/08/18 02:25:05 DEBUG : dir/file1: ReadFileHandle.seek from 1 to 5 (fs.RangeSeeker) 2026/08/18 02:25:05 DEBUG : dir/file1: ChunkedReader.RangeSeek from 1 to 5 length -1 2026/08/18 02:25:05 DEBUG : dir/file1: ChunkedReader.Read at -1 length 1 chunkOffset 5 chunkSize 134217728 2026/08/18 02:25:05 DEBUG : dir/file1: ChunkedReader.openRange at 5 length 134217728 2026/08/18 02:25:05 DEBUG : dir/file1: ReadFileHandle.seek from 6 to 1 (fs.RangeSeeker) 2026/08/18 02:25:05 DEBUG : dir/file1: ChunkedReader.RangeSeek from 6 to 1 length -1 2026/08/18 02:25:05 DEBUG : dir/file1: ChunkedReader.Read at -1 length 1 chunkOffset 1 chunkSize 134217728 2026/08/18 02:25:05 DEBUG : dir/file1: ChunkedReader.openRange at 1 length 134217728 2026/08/18 02:25:05 DEBUG : dir/file1: waiting for in-sequence read to 10 for 20ms 2026/08/18 02:25:05 DEBUG : dir/file1: aborting in-sequence read wait, off=10 2026/08/18 02:25:05 DEBUG : dir/file1: failed to wait for in-sequence read to 10 2026/08/18 02:25:05 DEBUG : dir/file1: ReadFileHandle.seek from 2 to 10 (fs.RangeSeeker) 2026/08/18 02:25:05 DEBUG : dir/file1: ChunkedReader.RangeSeek from 2 to 10 length -1 2026/08/18 02:25:05 DEBUG : dir/file1: ChunkedReader.Read at -1 length 6 chunkOffset 10 chunkSize 134217728 2026/08/18 02:25:05 DEBUG : dir/file1: ChunkedReader.openRange at 10 length 134217728 2026/08/18 02:25:06 DEBUG : dir/file1: ReadFileHandle.seek from 16 to 10 (fs.RangeSeeker) 2026/08/18 02:25:06 DEBUG : dir/file1: ChunkedReader.RangeSeek from 16 to 10 length -1 2026/08/18 02:25:06 DEBUG : dir/file1: ChunkedReader.Read at -1 length 256 chunkOffset 10 chunkSize 134217728 2026/08/18 02:25:06 DEBUG : dir/file1: ChunkedReader.openRange at 10 length 134217728 2026/08/18 02:25:06 DEBUG : dir/file1: waiting for in-sequence read to 100 for 20ms 2026/08/18 02:25:06 DEBUG : dir/file1: aborting in-sequence read wait, off=100 2026/08/18 02:25:06 DEBUG : dir/file1: failed to wait for in-sequence read to 100 2026/08/18 02:25:06 DEBUG : dir/file1: ReadFileHandle.Read attempt to read beyond end of file: 100 > 16 2026/08/18 02:25:06 DEBUG : dir/file1: waiting for in-sequence read to 100 for 20ms 2026/08/18 02:25:06 DEBUG : dir/file1: aborting in-sequence read wait, off=100 2026/08/18 02:25:06 DEBUG : dir/file1: failed to wait for in-sequence read to 100 2026/08/18 02:25:06 ERROR : dir/file1: ReadFileHandle.Read error: Bad file descriptor 2026/08/18 02:25:06 DEBUG : WaitForWriters: timeout=30s 2026/08/18 02:25:06 DEBUG : dir: Looking for writers 2026/08/18 02:25:06 DEBUG : file1: reading active writers 2026/08/18 02:25:06 DEBUG : Looking for writers 2026/08/18 02:25:06 DEBUG : dir: reading active writers 2026/08/18 02:25:06 DEBUG : >WaitForWriters: --- PASS: TestReadFileHandleReadAt (12.45s) === RUN TestVFSStatParent run.go:198: Remote "Linkbox root 'rclone-test-yovoyof6wari'", Local "Local file system at /tmp/rclone3879910915", Modify Window "876000h0m0s" 2026/08/18 02:25:09 INFO : Linkbox root 'rclone-test-yovoyof6wari': poll-interval is not supported by this remote 2026/08/18 02:25:09 NOTICE: Linkbox root 'rclone-test-yovoyof6wari': --vfs-cache-mode writes or full is recommended for this remote as it can't stream 2026/08/18 02:25:15 DEBUG : WaitForWriters: timeout=30s 2026/08/18 02:25:15 DEBUG : dir: Looking for writers 2026/08/18 02:25:15 DEBUG : Looking for writers 2026/08/18 02:25:15 DEBUG : dir: reading active writers 2026/08/18 02:25:15 DEBUG : file1: reading active writers 2026/08/18 02:25:15 DEBUG : >WaitForWriters: --- PASS: TestVFSStatParent (10.79s) === RUN TestVFSMkdirAll run.go:198: Remote "Linkbox root 'rclone-test-yovoyof6wari'", Local "Local file system at /tmp/rclone3879910915", Modify Window "876000h0m0s" 2026/08/18 02:25:20 INFO : Linkbox root 'rclone-test-yovoyof6wari': poll-interval is not supported by this remote 2026/08/18 02:25:20 NOTICE: Linkbox root 'rclone-test-yovoyof6wari': --vfs-cache-mode writes or full is recommended for this remote as it can't stream 2026/08/18 02:25:22 DEBUG : Added virtual directory entry vAddDir: "a" 2026/08/18 02:25:24 DEBUG : a: Added virtual directory entry vAddDir: "b" 2026/08/18 02:25:26 DEBUG : a/b: Added virtual directory entry vAddDir: "c" 2026/08/18 02:25:27 DEBUG : a/b/c: Added virtual directory entry vAddDir: "d" 2026/08/18 02:25:28 DEBUG : pacer: low level retry 1/10 (error invalid character '<' looking for beginning of value) 2026/08/18 02:25:28 DEBUG : pacer: Rate limited, increasing sleep to 400ms 2026/08/18 02:25:28 DEBUG : pacer: low level retry 2/10 (error invalid character '<' looking for beginning of value) 2026/08/18 02:25:28 DEBUG : pacer: Rate limited, increasing sleep to 800ms 2026/08/18 02:25:28 DEBUG : pacer: low level retry 3/10 (error invalid character '<' looking for beginning of value) 2026/08/18 02:25:28 DEBUG : pacer: Rate limited, increasing sleep to 1.6s 2026/08/18 02:25:29 DEBUG : pacer: low level retry 4/10 (error invalid character '<' looking for beginning of value) 2026/08/18 02:25:29 DEBUG : pacer: Rate limited, increasing sleep to 2s 2026/08/18 02:25:31 DEBUG : pacer: low level retry 5/10 (error invalid character '<' looking for beginning of value) 2026/08/18 02:25:33 DEBUG : pacer: low level retry 6/10 (error invalid character '<' looking for beginning of value) 2026/08/18 02:25:35 DEBUG : pacer: low level retry 7/10 (error invalid character '<' looking for beginning of value) 2026/08/18 02:25:37 DEBUG : pacer: low level retry 8/10 (error invalid character '<' looking for beginning of value) 2026/08/18 02:25:39 DEBUG : pacer: low level retry 9/10 (error invalid character '<' looking for beginning of value) 2026/08/18 02:25:41 DEBUG : pacer: low level retry 10/10 (error invalid character '<' looking for beginning of value) 2026/08/18 02:25:41 ERROR : a/b: error listing: getting files failed: invalid character '<' looking for beginning of value fstest.go:282: Error listing: getting files failed: invalid character '<' looking for beginning of value 2026/08/18 02:25:41 DEBUG : WaitForWriters: timeout=30s 2026/08/18 02:25:41 DEBUG : a/b/c/d: Looking for writers 2026/08/18 02:25:41 DEBUG : a/b/c: Looking for writers 2026/08/18 02:25:41 DEBUG : d: reading active writers 2026/08/18 02:25:41 DEBUG : a/b: Looking for writers 2026/08/18 02:25:41 DEBUG : c: reading active writers 2026/08/18 02:25:41 DEBUG : a: Looking for writers 2026/08/18 02:25:41 DEBUG : b: reading active writers 2026/08/18 02:25:41 DEBUG : Looking for writers 2026/08/18 02:25:41 DEBUG : a: reading active writers 2026/08/18 02:25:41 DEBUG : >WaitForWriters: 2026/08/18 02:25:43 DEBUG : pacer: low level retry 1/10 (error invalid character '<' looking for beginning of value) 2026/08/18 02:25:45 DEBUG : pacer: low level retry 2/10 (error invalid character '<' looking for beginning of value) 2026/08/18 02:25:47 DEBUG : pacer: low level retry 3/10 (error invalid character '<' looking for beginning of value) 2026/08/18 02:25:49 DEBUG : pacer: low level retry 4/10 (error invalid character '<' looking for beginning of value) 2026/08/18 02:25:51 DEBUG : pacer: low level retry 5/10 (error invalid character '<' looking for beginning of value) 2026/08/18 02:25:53 DEBUG : pacer: Reducing sleep to 1.5s 2026/08/18 02:25:55 DEBUG : pacer: Reducing sleep to 1.125s 2026/08/18 02:25:57 DEBUG : pacer: Reducing sleep to 843.75ms 2026/08/18 02:25:58 DEBUG : pacer: Reducing sleep to 632.8125ms 2026/08/18 02:25:59 DEBUG : pacer: Reducing sleep to 474.609375ms 2026/08/18 02:25:59 DEBUG : pacer: Reducing sleep to 355.957031ms 2026/08/18 02:26:01 DEBUG : pacer: Reducing sleep to 266.967773ms 2026/08/18 02:26:01 DEBUG : pacer: Reducing sleep to 200.225829ms 2026/08/18 02:26:02 DEBUG : pacer: Reducing sleep to 200ms --- FAIL: TestVFSMkdirAll (45.45s) FAIL 2026/08/18 02:26:06 DEBUG : Linkbox root 'rclone-test-yovoyof6wari': Purge remote "./vfs.test -test.v -test.timeout 1h0m0s -remote TestLinkbox: -verbose -test.run '^(TestFileOpenWrite|TestReadFileHandleReadAt|TestVFSMkdirAll|TestVFSStatParent)$|^TestFileRename$/^writes,forceCache=true$'" - Finished ERROR in 1m56.674927834s (try 2/5): exit status 1: Failed [TestVFSMkdirAll]