"./vfs.test -test.v -test.timeout 1h0m0s -remote TestPikPak: -verbose -test.run '^(TestFileReadAtNonZeroLength|TestZipLargeFiles)$'" - Starting (try 5/5)
2026/05/11 01:17:13 DEBUG : Creating backend with remote "TestPikPak:rclone-test-yoqunub1qijo"
2026/05/11 01:17:13 DEBUG : Using config file from "/home/rclone/.rclone.conf"
2026/05/11 01:17:14 DEBUG : Creating backend with remote "/tmp/rclone70636206"
=== RUN   TestFileReadAtNonZeroLength
    run.go:198: Remote "PikPak root 'rclone-test-yoqunub1qijo'", Local "Local file system at /tmp/rclone70636206", Modify Window "876000h0m0s"
2026/05/11 01:17:14 INFO  : PikPak root 'rclone-test-yoqunub1qijo': poll-interval is not supported by this remote
2026/05/11 01:17:14 NOTICE: PikPak root 'rclone-test-yoqunub1qijo': --vfs-cache-mode writes or full is recommended for this remote as it can't stream
2026/05/11 01:17:14 DEBUG : file1: OpenFile: flags=O_WRONLY|O_CREATE, perm=-rwxrwxrwx
2026/05/11 01:17:14 DEBUG : file1: Open: flags=O_WRONLY|O_CREATE
2026/05/11 01:17:14 DEBUG : Added virtual directory entry vAddFile: "file1"
2026/05/11 01:17:14 DEBUG : file1: >Open: fd=file1 (w), err=<nil>
2026/05/11 01:17:14 DEBUG : file1: >OpenFile: fd=file1 (w), err=<nil>
2026/05/11 01:17:14 DEBUG : Added virtual directory entry vAddFile: "file1"
2026/05/11 01:17:14 DEBUG : PikPak root 'rclone-test-yoqunub1qijo': File to upload is small (100 bytes), uploading instead of streaming
2026/05/11 01:17:15 DEBUG : file1: calculating gcid: failed to unwrap object from src: file1
2026/05/11 01:17:15 DEBUG : file1: gcid = 690e26b4cdc7a18dcd290b667a32f05fedd777af
2026/05/11 01:17:18 DEBUG : pacer: low level retry 1/10 (error upload (upload) is still in PHASE_TYPE_PENDING)
2026/05/11 01:17:18 DEBUG : pacer: Rate limited, increasing sleep to 200ms
2026/05/11 01:17:18 DEBUG : pacer: low level retry 2/10 (error upload (upload) is still in PHASE_TYPE_PENDING)
2026/05/11 01:17:18 DEBUG : pacer: Rate limited, increasing sleep to 400ms
2026/05/11 01:17:18 DEBUG : pacer: low level retry 3/10 (error upload (upload) is still in PHASE_TYPE_PENDING)
2026/05/11 01:17:18 DEBUG : pacer: Rate limited, increasing sleep to 800ms
2026/05/11 01:17:19 DEBUG : pacer: low level retry 4/10 (error upload (upload) is still in PHASE_TYPE_PENDING)
2026/05/11 01:17:19 DEBUG : pacer: Rate limited, increasing sleep to 1.6s
2026/05/11 01:17:19 DEBUG : pacer: low level retry 5/10 (error upload (upload) is still in PHASE_TYPE_PENDING)
2026/05/11 01:17:19 DEBUG : pacer: Rate limited, increasing sleep to 2s
2026/05/11 01:17:21 DEBUG : pacer: low level retry 6/10 (error upload (upload) is still in PHASE_TYPE_PENDING)
2026/05/11 01:17:23 DEBUG : pacer: low level retry 7/10 (error upload (upload) is still in PHASE_TYPE_PENDING)
2026/05/11 01:17:25 DEBUG : pacer: low level retry 8/10 (error upload (upload) is still in PHASE_TYPE_PENDING)
2026/05/11 01:17:27 DEBUG : pacer: low level retry 9/10 (error upload (upload) is still in PHASE_TYPE_PENDING)
2026/05/11 01:17:29 DEBUG : pacer: low level retry 10/10 (error upload (upload) is still in PHASE_TYPE_PENDING)
2026/05/11 01:17:29 DEBUG : file1: canceling upload: can't verify the task is completed: &api.Task{Kind:"drive#task", ID:"VOsJb0nk0L_iSjvZ6dR7RY2Fo2", Name:"upload", Type:"upload", UserID:"ZB7KFqZKGnYUJW_K", Statuses:[]interface {}{}, StatusSize:0, Params:(*api.TaskParams)(0x166091605100), FileID:"VOsJb0nT0L_iSjvZ6dR7RY2Co2", FileName:"file1", FileSize:"100", Message:"Pending", CreatedTime:api.Time{wall:0x34edce00, ext:63914059035, loc:(*time.Location)(0x166090f7bc00)}, UpdatedTime:api.Time{wall:0x35f13440, ext:63914059035, loc:(*time.Location)(0x166090f7bc00)}, ThirdTaskID:"", Phase:"PHASE_TYPE_PENDING", Progress:0, IconLink:"https://static.mypikpak.com/0ed033dfc7b3862af92a52ef7e3e4d257223df81", Callback:"", ReferenceResource:interface {}(nil), Space:""}
2026/05/11 01:17:31 DEBUG : pacer: Reducing sleep to 1.5s
2026/05/11 01:17:33 DEBUG : pacer: Reducing sleep to 1.125s
2026/05/11 01:17:35 DEBUG : pacer: Reducing sleep to 843.75ms
2026/05/11 01:17:35 DEBUG : file1: waiting 500ms for the cancellation to be effective
2026/05/11 01:17:35 ERROR : file1: WriteFileHandle.New Rcat failed: can't verify the task is completed: &api.Task{Kind:"drive#task", ID:"VOsJb0nk0L_iSjvZ6dR7RY2Fo2", Name:"upload", Type:"upload", UserID:"ZB7KFqZKGnYUJW_K", Statuses:[]interface {}{}, StatusSize:0, Params:(*api.TaskParams)(0x166091605100), FileID:"VOsJb0nT0L_iSjvZ6dR7RY2Co2", FileName:"file1", FileSize:"100", Message:"Pending", CreatedTime:api.Time{wall:0x34edce00, ext:63914059035, loc:(*time.Location)(0x166090f7bc00)}, UpdatedTime:api.Time{wall:0x35f13440, ext:63914059035, loc:(*time.Location)(0x166090f7bc00)}, ThirdTaskID:"", Phase:"PHASE_TYPE_PENDING", Progress:0, IconLink:"https://static.mypikpak.com/0ed033dfc7b3862af92a52ef7e3e4d257223df81", Callback:"", ReferenceResource:interface {}(nil), Space:""}
2026/05/11 01:17:35 DEBUG : file1: Remove: 
2026/05/11 01:17:35 DEBUG : Added virtual directory entry vDel: "file1"
2026/05/11 01:17:35 DEBUG : file1: >Remove: err=<nil>
    write_test.go:360: 
        	Error Trace:	/home/rclone/go/src/github.com/rclone/rclone/vfs/write_test.go:360
        	            				/home/rclone/go/src/github.com/rclone/rclone/vfs/write_test.go:384
        	Error:      	Received unexpected error:
        	            	can't verify the task is completed: &api.Task{Kind:"drive#task", ID:"VOsJb0nk0L_iSjvZ6dR7RY2Fo2", Name:"upload", Type:"upload", UserID:"ZB7KFqZKGnYUJW_K", Statuses:[]interface {}{}, StatusSize:0, Params:(*api.TaskParams)(0x166091605100), FileID:"VOsJb0nT0L_iSjvZ6dR7RY2Co2", FileName:"file1", FileSize:"100", Message:"Pending", CreatedTime:api.Time{wall:0x34edce00, ext:63914059035, loc:(*time.Location)(0x166090f7bc00)}, UpdatedTime:api.Time{wall:0x35f13440, ext:63914059035, loc:(*time.Location)(0x166090f7bc00)}, ThirdTaskID:"", Phase:"PHASE_TYPE_PENDING", Progress:0, IconLink:"https://static.mypikpak.com/0ed033dfc7b3862af92a52ef7e3e4d257223df81", Callback:"", ReferenceResource:interface {}(nil), Space:""}
        	Test:       	TestFileReadAtNonZeroLength
2026/05/11 01:17:35 DEBUG : file1: OpenFile: flags=O_RDONLY, perm=----------
2026/05/11 01:17:35 DEBUG : file1: >OpenFile: fd=<nil>, err=file does not exist
    write_test.go:365: 
        	Error Trace:	/home/rclone/go/src/github.com/rclone/rclone/vfs/write_test.go:365
        	            				/home/rclone/go/src/github.com/rclone/rclone/vfs/write_test.go:384
        	Error:      	Received unexpected error:
        	            	file does not exist
        	Test:       	TestFileReadAtNonZeroLength
2026/05/11 01:17:35 DEBUG : WaitForWriters: timeout=30s
2026/05/11 01:17:35 DEBUG : Looking for writers
2026/05/11 01:17:35 DEBUG : >WaitForWriters: 
2026/05/11 01:17:36 DEBUG : pacer: Reducing sleep to 632.8125ms
2026/05/11 01:17:37 DEBUG : pacer: Reducing sleep to 474.609375ms
--- FAIL: TestFileReadAtNonZeroLength (22.44s)
=== RUN   TestZipLargeFiles
    run.go:198: Remote "PikPak root 'rclone-test-yoqunub1qijo'", Local "Local file system at /tmp/rclone70636206", Modify Window "876000h0m0s"
2026/05/11 01:17:37 INFO  : PikPak root 'rclone-test-yoqunub1qijo': poll-interval is not supported by this remote
2026/05/11 01:17:37 NOTICE: PikPak root 'rclone-test-yoqunub1qijo': --vfs-cache-mode writes or full is recommended for this remote as it can't stream
2026/05/11 01:17:37 DEBUG : pacer: Reducing sleep to 355.957031ms
2026/05/11 01:17:38 DEBUG : pacer: Reducing sleep to 266.967773ms
2026/05/11 01:17:38 DEBUG : pacer: Reducing sleep to 200.225829ms
2026/05/11 01:17:38 DEBUG : bigdir/big.bin: calculating gcid: failed to unwrap object from src: bigdir/big.bin
2026/05/11 01:17:38 DEBUG : bigdir/big.bin: gcid = 74201795916474aae36c00fb02bd6571500f408d
2026/05/11 01:17:38 DEBUG : pacer: Reducing sleep to 150.169371ms
2026/05/11 01:17:42 DEBUG : pacer: Reducing sleep to 112.627028ms
2026/05/11 01:17:42 DEBUG : pacer: low level retry 1/10 (error upload (upload) is still in PHASE_TYPE_PENDING)
2026/05/11 01:17:42 DEBUG : pacer: Rate limited, increasing sleep to 225.254056ms
2026/05/11 01:17:43 DEBUG : pacer: low level retry 2/10 (error upload (upload) is still in PHASE_TYPE_PENDING)
2026/05/11 01:17:43 DEBUG : pacer: Rate limited, increasing sleep to 450.508112ms
2026/05/11 01:17:43 DEBUG : pacer: low level retry 3/10 (error upload (upload) is still in PHASE_TYPE_PENDING)
2026/05/11 01:17:43 DEBUG : pacer: Rate limited, increasing sleep to 901.016224ms
2026/05/11 01:17:43 DEBUG : pacer: low level retry 4/10 (error upload (upload) is still in PHASE_TYPE_PENDING)
2026/05/11 01:17:43 DEBUG : pacer: Rate limited, increasing sleep to 1.802032448s
2026/05/11 01:17:44 DEBUG : pacer: low level retry 5/10 (error upload (upload) is still in PHASE_TYPE_PENDING)
2026/05/11 01:17:44 DEBUG : pacer: Rate limited, increasing sleep to 2s
2026/05/11 01:17:46 DEBUG : pacer: low level retry 6/10 (error upload (upload) is still in PHASE_TYPE_PENDING)
2026/05/11 01:17:48 DEBUG : pacer: low level retry 7/10 (error upload (upload) is still in PHASE_TYPE_PENDING)
2026/05/11 01:17:50 DEBUG : pacer: low level retry 8/10 (error upload (upload) is still in PHASE_TYPE_PENDING)
2026/05/11 01:17:52 DEBUG : pacer: low level retry 9/10 (error upload (upload) is still in PHASE_TYPE_PENDING)
2026/05/11 01:17:54 DEBUG : pacer: low level retry 10/10 (error upload (upload) is still in PHASE_TYPE_PENDING)
2026/05/11 01:17:54 DEBUG : big.bin: canceling upload: can't verify the task is completed: &api.Task{Kind:"drive#task", ID:"VOsJb6N0lYLADoMYgilI-jE7o2", Name:"upload", Type:"upload", UserID:"ZB7KFqZKGnYUJW_K", Statuses:[]interface {}{}, StatusSize:0, Params:(*api.TaskParams)(0x166091534240), FileID:"VOsJb6MflYLADoMYgilI-jE2o2", FileName:"big.bin", FileSize:"5242880", Message:"Pending", CreatedTime:api.Time{wall:0x29114e40, ext:63914059058, loc:(*time.Location)(0x166090f7bc00)}, UpdatedTime:api.Time{wall:0x2acbcf80, ext:63914059058, loc:(*time.Location)(0x166090f7bc00)}, ThirdTaskID:"", Phase:"PHASE_TYPE_PENDING", Progress:0, IconLink:"https://static.mypikpak.com/0ed033dfc7b3862af92a52ef7e3e4d257223df81", Callback:"", ReferenceResource:interface {}(nil), Space:""}
2026/05/11 01:17:56 DEBUG : pacer: Reducing sleep to 1.5s
2026/05/11 01:17:58 DEBUG : pacer: Reducing sleep to 1.125s
2026/05/11 01:18:00 DEBUG : pacer: Reducing sleep to 843.75ms
2026/05/11 01:18:00 DEBUG : big.bin: waiting 500ms for the cancellation to be effective
    run.go:303: Failed to put "bigdir/big.bin" to "PikPak root 'rclone-test-yoqunub1qijo'": can't verify the task is completed: &api.Task{Kind:"drive#task", ID:"VOsJb6N0lYLADoMYgilI-jE7o2", Name:"upload", Type:"upload", UserID:"ZB7KFqZKGnYUJW_K", Statuses:[]interface {}{}, StatusSize:0, Params:(*api.TaskParams)(0x166091534240), FileID:"VOsJb6MflYLADoMYgilI-jE2o2", FileName:"big.bin", FileSize:"5242880", Message:"Pending", CreatedTime:api.Time{wall:0x29114e40, ext:63914059058, loc:(*time.Location)(0x166090f7bc00)}, UpdatedTime:api.Time{wall:0x2acbcf80, ext:63914059058, loc:(*time.Location)(0x166090f7bc00)}, ThirdTaskID:"", Phase:"PHASE_TYPE_PENDING", Progress:0, IconLink:"https://static.mypikpak.com/0ed033dfc7b3862af92a52ef7e3e4d257223df81", Callback:"", ReferenceResource:interface {}(nil), Space:""}
2026/05/11 01:18:00 DEBUG : WaitForWriters: timeout=30s
2026/05/11 01:18:00 DEBUG : Looking for writers
2026/05/11 01:18:00 DEBUG : >WaitForWriters: 
2026/05/11 01:18:01 DEBUG : pacer: Reducing sleep to 632.8125ms
2026/05/11 01:18:02 DEBUG : pacer: Reducing sleep to 474.609375ms
2026/05/11 01:18:02 DEBUG : pacer: Reducing sleep to 355.957031ms
2026/05/11 01:18:03 DEBUG : pacer: Reducing sleep to 266.967773ms
2026/05/11 01:18:04 DEBUG : pacer: Reducing sleep to 200.225829ms
2026/05/11 01:18:04 DEBUG : pacer: Reducing sleep to 150.169371ms
--- FAIL: TestZipLargeFiles (27.33s)
FAIL
2026/05/11 01:18:04 DEBUG : PikPak root 'rclone-test-yoqunub1qijo': Purge remote
2026/05/11 01:18:04 DEBUG : pacer: Reducing sleep to 112.627028ms
2026/05/11 01:18:05 DEBUG : pacer: Reducing sleep to 100ms
"./vfs.test -test.v -test.timeout 1h0m0s -remote TestPikPak: -verbose -test.run '^(TestFileReadAtNonZeroLength|TestZipLargeFiles)$'" - Finished ERROR in 52.281516513s (try 5/5): exit status 1: Failed [TestFileReadAtNonZeroLength TestZipLargeFiles]