"./vfs.test -test.v -test.timeout 1h0m0s -remote TestYandex: -verbose -test.run '^(TestReadFileHandleFlush|TestReadFileHandleReadAt)$'" - Starting (try 2/5)
2026/04/25 05:21:52 DEBUG : Creating backend with remote "TestYandex:rclone-test-xicanob1dido"
2026/04/25 05:21:52 DEBUG : Using config file from "/home/rclone/.rclone.conf"
2026/04/25 05:21:53 DEBUG : Creating backend with remote "/tmp/rclone446156217"
=== RUN   TestReadFileHandleReadAt
    run.go:185: Remote "Yandex rclone-test-xicanob1dido", Local "Local file system at /tmp/rclone446156217", Modify Window "1ns"
2026/04/25 05:21:53 INFO  : Yandex rclone-test-xicanob1dido: poll-interval is not supported by this remote
2026/04/25 05:21:55 DEBUG : dir/file1: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx
2026/04/25 05:21:56 DEBUG : dir/file1: Open: flags=O_RDONLY
2026/04/25 05:21:56 DEBUG : dir/file1: >Open: fd=dir/file1 (r), err=<nil>
2026/04/25 05:21:56 DEBUG : dir/file1: >OpenFile: fd=dir/file1 (r), err=<nil>
2026/04/25 05:21:56 DEBUG : dir/file1: ChunkedReader.openRange at 0 length 134217728
2026/04/25 05:21:56 DEBUG : dir/file1: ChunkedReader.Read at 0 length 1 chunkOffset 0 chunkSize 134217728
2026/04/25 05:21:56 DEBUG : dir/file1: waiting for in-sequence read to 5 for 20ms
2026/04/25 05:21:56 DEBUG : dir/file1: aborting in-sequence read wait, off=5
2026/04/25 05:21:56 DEBUG : dir/file1: failed to wait for in-sequence read to 5
2026/04/25 05:21:56 DEBUG : dir/file1: ReadFileHandle.seek from 1 to 5 (fs.RangeSeeker)
2026/04/25 05:21:56 DEBUG : dir/file1: ChunkedReader.RangeSeek from 1 to 5 length -1
2026/04/25 05:21:56 DEBUG : dir/file1: ChunkedReader.Read at -1 length 1 chunkOffset 5 chunkSize 134217728
2026/04/25 05:21:56 DEBUG : dir/file1: ChunkedReader.openRange at 5 length 134217728
2026/04/25 05:21:57 DEBUG : dir/file1: ReadFileHandle.seek from 6 to 1 (fs.RangeSeeker)
2026/04/25 05:21:57 DEBUG : dir/file1: ChunkedReader.RangeSeek from 6 to 1 length -1
2026/04/25 05:21:57 DEBUG : dir/file1: ChunkedReader.Read at -1 length 1 chunkOffset 1 chunkSize 134217728
2026/04/25 05:21:57 DEBUG : dir/file1: ChunkedReader.openRange at 1 length 134217728
2026/04/25 05:21:58 DEBUG : dir/file1: waiting for in-sequence read to 10 for 20ms
2026/04/25 05:21:58 DEBUG : dir/file1: aborting in-sequence read wait, off=10
2026/04/25 05:21:58 DEBUG : dir/file1: failed to wait for in-sequence read to 10
2026/04/25 05:21:58 DEBUG : dir/file1: ReadFileHandle.seek from 2 to 10 (fs.RangeSeeker)
2026/04/25 05:21:58 DEBUG : dir/file1: ChunkedReader.RangeSeek from 2 to 10 length -1
2026/04/25 05:21:58 DEBUG : dir/file1: ChunkedReader.Read at -1 length 6 chunkOffset 10 chunkSize 134217728
2026/04/25 05:21:58 DEBUG : dir/file1: ChunkedReader.openRange at 10 length 134217728
2026/04/25 05:21:58 DEBUG : dir/file1: ReadFileHandle.seek from 16 to 10 (fs.RangeSeeker)
2026/04/25 05:21:58 DEBUG : dir/file1: ChunkedReader.RangeSeek from 16 to 10 length -1
2026/04/25 05:21:58 DEBUG : dir/file1: ChunkedReader.Read at -1 length 256 chunkOffset 10 chunkSize 134217728
2026/04/25 05:21:58 DEBUG : dir/file1: ChunkedReader.openRange at 10 length 134217728
2026/04/25 05:21:58 DEBUG : dir/file1: waiting for in-sequence read to 100 for 20ms
2026/04/25 05:21:58 DEBUG : dir/file1: aborting in-sequence read wait, off=100
2026/04/25 05:21:58 DEBUG : dir/file1: failed to wait for in-sequence read to 100
2026/04/25 05:21:58 DEBUG : dir/file1: ReadFileHandle.Read attempt to read beyond end of file: 100 > 16
2026/04/25 05:21:58 DEBUG : dir/file1: waiting for in-sequence read to 100 for 20ms
2026/04/25 05:21:58 DEBUG : dir/file1: aborting in-sequence read wait, off=100
2026/04/25 05:21:58 DEBUG : dir/file1: failed to wait for in-sequence read to 100
2026/04/25 05:21:58 ERROR : dir/file1: ReadFileHandle.Read error: Bad file descriptor
2026/04/25 05:21:58 DEBUG : WaitForWriters: timeout=30s
2026/04/25 05:21:58 DEBUG : dir: Looking for writers
2026/04/25 05:21:58 DEBUG : file1: reading active writers
2026/04/25 05:21:58 DEBUG : Looking for writers
2026/04/25 05:21:58 DEBUG : dir: reading active writers
2026/04/25 05:21:58 DEBUG : >WaitForWriters: 
--- PASS: TestReadFileHandleReadAt (20.30s)
=== RUN   TestReadFileHandleFlush
    run.go:185: Remote "Yandex rclone-test-xicanob1dido", Local "Local file system at /tmp/rclone446156217", Modify Window "1ns"
2026/04/25 05:22:13 INFO  : Yandex rclone-test-xicanob1dido: poll-interval is not supported by this remote
2026/04/25 05:22:16 DEBUG : dir/file1: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx
2026/04/25 05:22:17 DEBUG : dir/file1: Open: flags=O_RDONLY
2026/04/25 05:22:17 DEBUG : dir/file1: >Open: fd=dir/file1 (r), err=<nil>
2026/04/25 05:22:17 DEBUG : dir/file1: >OpenFile: fd=dir/file1 (r), err=<nil>
2026/04/25 05:22:17 DEBUG : dir/file1: ChunkedReader.openRange at 0 length 134217728
2026/04/25 05:22:17 DEBUG : dir/file1: ChunkedReader.Read at 0 length 256 chunkOffset 0 chunkSize 134217728
2026/04/25 05:22:17 DEBUG : WaitForWriters: timeout=30s
2026/04/25 05:22:17 DEBUG : dir: Looking for writers
2026/04/25 05:22:17 DEBUG : file1: reading active writers
2026/04/25 05:22:17 DEBUG : Looking for writers
2026/04/25 05:22:17 DEBUG : dir: reading active writers
2026/04/25 05:22:17 DEBUG : >WaitForWriters: 
--- PASS: TestReadFileHandleFlush (18.92s)
PASS
2026/04/25 05:22:32 DEBUG : Yandex rclone-test-xicanob1dido: Purge remote
"./vfs.test -test.v -test.timeout 1h0m0s -remote TestYandex: -verbose -test.run '^(TestReadFileHandleFlush|TestReadFileHandleReadAt)$'" - Finished OK in 46.205710194s (try 2/5)