"./operations.test -test.v -test.timeout 1h0m0s -remote TestS3GCS: -verbose" - Starting (try 1/5) 2026/03/28 05:16:39 DEBUG : Creating backend with remote "TestS3GCS:rclone-test-wiqolej7luxi" 2026/03/28 05:16:39 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2026/03/28 05:16:39 DEBUG : Creating backend with remote "/tmp/rclone1365695657" === RUN TestDoMultiThreadCopy --- PASS: TestDoMultiThreadCopy (0.00s) === RUN TestMultithreadCalculateNumChunks === RUN TestMultithreadCalculateNumChunks/{size:1_chunkSize:65536_wantNumChunks:1} === RUN TestMultithreadCalculateNumChunks/{size:1048576_chunkSize:1_wantNumChunks:1048576} === RUN TestMultithreadCalculateNumChunks/{size:1048576_chunkSize:2_wantNumChunks:524288} === RUN TestMultithreadCalculateNumChunks/{size:1048577_chunkSize:2_wantNumChunks:524289} === RUN TestMultithreadCalculateNumChunks/{size:1048575_chunkSize:2_wantNumChunks:524288} --- PASS: TestMultithreadCalculateNumChunks (0.00s) --- PASS: TestMultithreadCalculateNumChunks/{size:1_chunkSize:65536_wantNumChunks:1} (0.00s) --- PASS: TestMultithreadCalculateNumChunks/{size:1048576_chunkSize:1_wantNumChunks:1048576} (0.00s) --- PASS: TestMultithreadCalculateNumChunks/{size:1048576_chunkSize:2_wantNumChunks:524288} (0.00s) --- PASS: TestMultithreadCalculateNumChunks/{size:1048577_chunkSize:2_wantNumChunks:524289} (0.00s) --- PASS: TestMultithreadCalculateNumChunks/{size:1048575_chunkSize:2_wantNumChunks:524288} (0.00s) === RUN TestMultithreadCopy run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" 2026/03/28 05:16:40 INFO : S3 bucket rclone-test-wiqolej7luxi: Bucket "rclone-test-wiqolej7luxi" created with ACL "" 2026/03/28 05:16:40 DEBUG : chunksize-probe: open chunk writer: started multipart upload: ABPnzm6YE9OaAvEZ5UXUbw1I50uDjQkgxVSth72SAy8VzQnWtoSn7QyO65qO-SiTL2msuWA 2026/03/28 05:16:41 DEBUG : chunksize-probe: multipart upload "ABPnzm6YE9OaAvEZ5UXUbw1I50uDjQkgxVSth72SAy8VzQnWtoSn7QyO65qO-SiTL2msuWA" aborted === RUN TestMultithreadCopy/upload=false,size=10485759,streams=2 2026/03/28 05:16:44 DEBUG : test-multithread-copy-false-10485759-2: multi-thread copy: disabling buffering because destination uses OpenWriterAt 2026/03/28 05:16:44 DEBUG : test-multithread-copy-false-10485759-2: multi-thread copy: write buffer set to 131072 2026/03/28 05:16:44 DEBUG : test-multithread-copy-false-10485759-2: multi-thread copy: chunk size 64Mi was bigger than source file size 10.000Mi 2026/03/28 05:16:44 DEBUG : test-multithread-copy-false-10485759-2: multi-thread copy: using backend concurrency of 4 instead of --multi-thread-streams 2 2026/03/28 05:16:44 DEBUG : test-multithread-copy-false-10485759-2: multi-thread copy: number of streams 4 was bigger than number of chunks 1 2026/03/28 05:16:44 DEBUG : test-multithread-copy-false-10485759-2: Starting multi-thread copy with 1 chunks of size 10.000Mi with 1 parallel streams 2026/03/28 05:16:44 DEBUG : test-multithread-copy-false-10485759-2: multi-thread copy: chunk 1/1 (0-10485759) size 10.000Mi starting 2026/03/28 05:16:45 DEBUG : test-multithread-copy-false-10485759-2: writing chunk 0 2026/03/28 05:16:46 DEBUG : test-multithread-copy-false-10485759-2: multi-thread copy: chunk 1/1 (0-10485759) size 10.000Mi finished 2026/03/28 05:16:46 DEBUG : test-multithread-copy-false-10485759-2: Finished multi-thread copy with 1 parts of size 10.000Mi === RUN TestMultithreadCopy/upload=false,size=10485760,streams=2 2026/03/28 05:16:51 DEBUG : test-multithread-copy-false-10485760-2: multi-thread copy: disabling buffering because destination uses OpenWriterAt 2026/03/28 05:16:51 DEBUG : test-multithread-copy-false-10485760-2: multi-thread copy: write buffer set to 131072 2026/03/28 05:16:51 DEBUG : test-multithread-copy-false-10485760-2: multi-thread copy: chunk size 64Mi was bigger than source file size 10Mi 2026/03/28 05:16:51 DEBUG : test-multithread-copy-false-10485760-2: multi-thread copy: using backend concurrency of 4 instead of --multi-thread-streams 2 2026/03/28 05:16:51 DEBUG : test-multithread-copy-false-10485760-2: multi-thread copy: number of streams 4 was bigger than number of chunks 1 2026/03/28 05:16:51 DEBUG : test-multithread-copy-false-10485760-2: Starting multi-thread copy with 1 chunks of size 10Mi with 1 parallel streams 2026/03/28 05:16:51 DEBUG : test-multithread-copy-false-10485760-2: multi-thread copy: chunk 1/1 (0-10485760) size 10Mi starting 2026/03/28 05:16:51 DEBUG : test-multithread-copy-false-10485760-2: writing chunk 0 2026/03/28 05:16:53 DEBUG : test-multithread-copy-false-10485760-2: multi-thread copy: chunk 1/1 (0-10485760) size 10Mi finished 2026/03/28 05:16:53 DEBUG : test-multithread-copy-false-10485760-2: Finished multi-thread copy with 1 parts of size 10Mi === RUN TestMultithreadCopy/upload=false,size=10485761,streams=2 2026/03/28 05:16:57 DEBUG : test-multithread-copy-false-10485761-2: multi-thread copy: disabling buffering because destination uses OpenWriterAt 2026/03/28 05:16:57 DEBUG : test-multithread-copy-false-10485761-2: multi-thread copy: write buffer set to 131072 2026/03/28 05:16:57 DEBUG : test-multithread-copy-false-10485761-2: multi-thread copy: chunk size 64Mi was bigger than source file size 10.000Mi 2026/03/28 05:16:57 DEBUG : test-multithread-copy-false-10485761-2: multi-thread copy: using backend concurrency of 4 instead of --multi-thread-streams 2 2026/03/28 05:16:57 DEBUG : test-multithread-copy-false-10485761-2: multi-thread copy: number of streams 4 was bigger than number of chunks 1 2026/03/28 05:16:57 DEBUG : test-multithread-copy-false-10485761-2: Starting multi-thread copy with 1 chunks of size 10.000Mi with 1 parallel streams 2026/03/28 05:16:57 DEBUG : test-multithread-copy-false-10485761-2: multi-thread copy: chunk 1/1 (0-10485761) size 10.000Mi starting 2026/03/28 05:16:58 DEBUG : test-multithread-copy-false-10485761-2: writing chunk 0 2026/03/28 05:16:58 DEBUG : test-multithread-copy-false-10485761-2: multi-thread copy: chunk 1/1 (0-10485761) size 10.000Mi finished 2026/03/28 05:16:58 DEBUG : test-multithread-copy-false-10485761-2: Finished multi-thread copy with 1 parts of size 10.000Mi === RUN TestMultithreadCopy/upload=true,size=10485759,streams=2 2026/03/28 05:17:01 DEBUG : test-multithread-copy-true-10485759-2: multi-thread copy: disabling buffering because source is local disk 2026/03/28 05:17:01 DEBUG : test-multithread-copy-true-10485759-2: open chunk writer: started multipart upload: ABPnzm6ZPp4WKckopIr65pAQ4P2L-VU-CXRV1ZyWitksYgIR5r4YufvDv9uyW6jToYGjiLw 2026/03/28 05:17:01 DEBUG : test-multithread-copy-true-10485759-2: multi-thread copy: using backend concurrency of 4 instead of --multi-thread-streams 2 2026/03/28 05:17:01 DEBUG : test-multithread-copy-true-10485759-2: multi-thread copy: number of streams 4 was bigger than number of chunks 2 2026/03/28 05:17:01 DEBUG : test-multithread-copy-true-10485759-2: Starting multi-thread copy with 2 chunks of size 5Mi with 2 parallel streams 2026/03/28 05:17:01 DEBUG : test-multithread-copy-true-10485759-2: multi-thread copy: chunk 2/2 (5242880-10485759) size 5.000Mi starting 2026/03/28 05:17:01 DEBUG : test-multithread-copy-true-10485759-2: multi-thread copy: chunk 1/2 (0-5242880) size 5Mi starting 2026/03/28 05:17:01 DEBUG : test-multithread-copy-true-10485759-2: Seek from 5242879 to 0 2026/03/28 05:17:01 DEBUG : test-multithread-copy-true-10485759-2: Seek from 5242880 to 0 2026/03/28 05:17:03 DEBUG : test-multithread-copy-true-10485759-2: multipart upload wrote chunk 2 with 5242879 bytes and etag "c49207999fbcc43613c25577262393f8" 2026/03/28 05:17:03 DEBUG : test-multithread-copy-true-10485759-2: multi-thread copy: chunk 2/2 (5242880-10485759) size 5.000Mi finished 2026/03/28 05:17:04 DEBUG : test-multithread-copy-true-10485759-2: multipart upload wrote chunk 1 with 5242880 bytes and etag "31a4ea756a7c8582cf8cd364a3dbee7c" 2026/03/28 05:17:04 DEBUG : test-multithread-copy-true-10485759-2: multi-thread copy: chunk 1/2 (0-5242880) size 5Mi finished 2026/03/28 05:17:04 DEBUG : test-multithread-copy-true-10485759-2: multipart upload "ABPnzm6ZPp4WKckopIr65pAQ4P2L-VU-CXRV1ZyWitksYgIR5r4YufvDv9uyW6jToYGjiLw" finished 2026/03/28 05:17:04 DEBUG : test-multithread-copy-true-10485759-2: Finished multi-thread copy with 2 parts of size 5Mi === RUN TestMultithreadCopy/upload=true,size=10485760,streams=2 2026/03/28 05:17:06 DEBUG : test-multithread-copy-true-10485760-2: multi-thread copy: disabling buffering because source is local disk 2026/03/28 05:17:07 DEBUG : test-multithread-copy-true-10485760-2: open chunk writer: started multipart upload: ABPnzm7jWanBEHRuJmbtGmuMEJC0UwxfI3efhlg8-nexOuPBMDrBaYTsbC2Z1bCnFhd_b0E 2026/03/28 05:17:07 DEBUG : test-multithread-copy-true-10485760-2: multi-thread copy: using backend concurrency of 4 instead of --multi-thread-streams 2 2026/03/28 05:17:07 DEBUG : test-multithread-copy-true-10485760-2: multi-thread copy: number of streams 4 was bigger than number of chunks 2 2026/03/28 05:17:07 DEBUG : test-multithread-copy-true-10485760-2: Starting multi-thread copy with 2 chunks of size 5Mi with 2 parallel streams 2026/03/28 05:17:07 DEBUG : test-multithread-copy-true-10485760-2: multi-thread copy: chunk 2/2 (5242880-10485760) size 5Mi starting 2026/03/28 05:17:07 DEBUG : test-multithread-copy-true-10485760-2: multi-thread copy: chunk 1/2 (0-5242880) size 5Mi starting 2026/03/28 05:17:07 DEBUG : test-multithread-copy-true-10485760-2: Seek from 5242880 to 0 2026/03/28 05:17:07 DEBUG : test-multithread-copy-true-10485760-2: Seek from 5242880 to 0 2026/03/28 05:17:09 DEBUG : test-multithread-copy-true-10485760-2: multipart upload wrote chunk 1 with 5242880 bytes and etag "f488463fd70b105c4e17c3bcee6d7f88" 2026/03/28 05:17:09 DEBUG : test-multithread-copy-true-10485760-2: multi-thread copy: chunk 1/2 (0-5242880) size 5Mi finished 2026/03/28 05:17:09 DEBUG : test-multithread-copy-true-10485760-2: multipart upload wrote chunk 2 with 5242880 bytes and etag "52734ffbd09a8edf068b98fbfc9f639b" 2026/03/28 05:17:09 DEBUG : test-multithread-copy-true-10485760-2: multi-thread copy: chunk 2/2 (5242880-10485760) size 5Mi finished 2026/03/28 05:17:09 DEBUG : test-multithread-copy-true-10485760-2: multipart upload "ABPnzm7jWanBEHRuJmbtGmuMEJC0UwxfI3efhlg8-nexOuPBMDrBaYTsbC2Z1bCnFhd_b0E" finished 2026/03/28 05:17:10 DEBUG : test-multithread-copy-true-10485760-2: Finished multi-thread copy with 2 parts of size 5Mi === RUN TestMultithreadCopy/upload=true,size=10485761,streams=2 2026/03/28 05:17:12 DEBUG : test-multithread-copy-true-10485761-2: multi-thread copy: disabling buffering because source is local disk 2026/03/28 05:17:12 DEBUG : test-multithread-copy-true-10485761-2: open chunk writer: started multipart upload: ABPnzm7JWkuL4EXkMcwNRDJLxXneXAWHfYsIKfgKrzlDmvukEle60TBzmen6wauiknNA4wE 2026/03/28 05:17:12 DEBUG : test-multithread-copy-true-10485761-2: multi-thread copy: using backend concurrency of 4 instead of --multi-thread-streams 2 2026/03/28 05:17:12 DEBUG : test-multithread-copy-true-10485761-2: multi-thread copy: number of streams 4 was bigger than number of chunks 3 2026/03/28 05:17:12 DEBUG : test-multithread-copy-true-10485761-2: Starting multi-thread copy with 3 chunks of size 5Mi with 3 parallel streams 2026/03/28 05:17:12 DEBUG : test-multithread-copy-true-10485761-2: multi-thread copy: chunk 3/3 (10485760-10485761) size 1 starting 2026/03/28 05:17:12 DEBUG : test-multithread-copy-true-10485761-2: multi-thread copy: chunk 1/3 (0-5242880) size 5Mi starting 2026/03/28 05:17:12 DEBUG : test-multithread-copy-true-10485761-2: multi-thread copy: chunk 2/3 (5242880-10485760) size 5Mi starting 2026/03/28 05:17:12 DEBUG : test-multithread-copy-true-10485761-2: Seek from 1 to 0 2026/03/28 05:17:12 DEBUG : test-multithread-copy-true-10485761-2: Seek from 5242880 to 0 2026/03/28 05:17:12 DEBUG : test-multithread-copy-true-10485761-2: Seek from 5242880 to 0 2026/03/28 05:17:14 DEBUG : test-multithread-copy-true-10485761-2: multipart upload wrote chunk 3 with 1 bytes and etag "4b43b0aee35624cd95b910189b3dc231" 2026/03/28 05:17:14 DEBUG : test-multithread-copy-true-10485761-2: multi-thread copy: chunk 3/3 (10485760-10485761) size 1 finished 2026/03/28 05:17:14 DEBUG : test-multithread-copy-true-10485761-2: multipart upload wrote chunk 2 with 5242880 bytes and etag "31c043e18ebf26b0e37a4a3c77cc0eb8" 2026/03/28 05:17:14 DEBUG : test-multithread-copy-true-10485761-2: multi-thread copy: chunk 2/3 (5242880-10485760) size 5Mi finished 2026/03/28 05:17:15 DEBUG : test-multithread-copy-true-10485761-2: multipart upload wrote chunk 1 with 5242880 bytes and etag "1966232195782ae9d356c6eb02385f33" 2026/03/28 05:17:15 DEBUG : test-multithread-copy-true-10485761-2: multi-thread copy: chunk 1/3 (0-5242880) size 5Mi finished 2026/03/28 05:17:15 DEBUG : test-multithread-copy-true-10485761-2: multipart upload "ABPnzm7JWkuL4EXkMcwNRDJLxXneXAWHfYsIKfgKrzlDmvukEle60TBzmen6wauiknNA4wE" finished 2026/03/28 05:17:16 DEBUG : test-multithread-copy-true-10485761-2: Finished multi-thread copy with 3 parts of size 5Mi --- PASS: TestMultithreadCopy (38.10s) --- PASS: TestMultithreadCopy/upload=false,size=10485759,streams=2 (6.37s) --- PASS: TestMultithreadCopy/upload=false,size=10485760,streams=2 (6.59s) --- PASS: TestMultithreadCopy/upload=false,size=10485761,streams=2 (5.80s) --- PASS: TestMultithreadCopy/upload=true,size=10485759,streams=2 (5.71s) --- PASS: TestMultithreadCopy/upload=true,size=10485760,streams=2 (5.40s) --- PASS: TestMultithreadCopy/upload=true,size=10485761,streams=2 (5.91s) === RUN TestMultithreadCopyAbort run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" 2026/03/28 05:17:17 DEBUG : chunksize-probe: open chunk writer: started multipart upload: ABPnzm7pEHNAavLi510qZZI9YO2nGW0iSRdcoT68Z6oZYCjGIfh1Rmp1rGG4CQe45LGYceY 2026/03/28 05:17:18 DEBUG : chunksize-probe: multipart upload "ABPnzm7pEHNAavLi510qZZI9YO2nGW0iSRdcoT68Z6oZYCjGIfh1Rmp1rGG4CQe45LGYceY" aborted 2026/03/28 05:17:20 DEBUG : test-multithread-abort: multi-thread copy: disabling buffering because source is local disk 2026/03/28 05:17:20 DEBUG : test-multithread-abort: open chunk writer: started multipart upload: ABPnzm5FxEeDlrfJ0HbnJ9Gj4QXcksq_HKeWVKUAqCCPSNspOc0XSuorcpa5gnpJXuqYvkQ 2026/03/28 05:17:20 DEBUG : test-multithread-abort: multi-thread copy: using backend concurrency of 4 instead of --multi-thread-streams 1 2026/03/28 05:17:20 DEBUG : test-multithread-abort: multi-thread copy: number of streams 4 was bigger than number of chunks 3 2026/03/28 05:17:20 DEBUG : test-multithread-abort: Starting multi-thread copy with 3 chunks of size 5Mi with 3 parallel streams 2026/03/28 05:17:20 DEBUG : test-multithread-abort: multi-thread copy: chunk 3/3 (10485760-10485761) size 1 starting 2026/03/28 05:17:20 DEBUG : Open with options = [RangeOption(10485760,10485760)] 2026/03/28 05:17:20 DEBUG : test-multithread-abort: multi-thread copy: chunk 1/3 (0-5242880) size 5Mi starting 2026/03/28 05:17:20 DEBUG : Open with options = [RangeOption(0,5242879)] 2026/03/28 05:17:20 DEBUG : test-multithread-abort: multi-thread copy: chunk 2/3 (5242880-10485760) size 5Mi starting 2026/03/28 05:17:20 DEBUG : Open with options = [RangeOption(5242880,10485759)] 2026/03/28 05:17:20 DEBUG : test-multithread-abort: Seek from 5242880 to 0 2026/03/28 05:17:20 DEBUG : Open with options = [RangeOption(0,5242879)] 2026/03/28 05:17:20 DEBUG : test-multithread-abort: Seek from 5242880 to 0 2026/03/28 05:17:20 DEBUG : Open with options = [RangeOption(5242880,10485759)] 2026/03/28 05:17:22 DEBUG : test-multithread-abort: multipart upload wrote chunk 2 with 5242880 bytes and etag "46b28741db1b08b1a4628501827870fe" 2026/03/28 05:17:22 DEBUG : test-multithread-abort: multi-thread copy: chunk 2/3 (5242880-10485760) size 5Mi finished 2026/03/28 05:17:22 DEBUG : test-multithread-abort: multipart upload wrote chunk 1 with 5242880 bytes and etag "388884b74e8b8f088936999e3d5e0628" 2026/03/28 05:17:22 DEBUG : test-multithread-abort: multi-thread copy: chunk 1/3 (0-5242880) size 5Mi finished 2026/03/28 05:17:22 DEBUG : Returning error reader 2026/03/28 05:17:22 DEBUG : BOOM: simulated read failure 2026/03/28 05:17:22 DEBUG : test-multithread-abort: Reopening on read failure after offset 0 bytes: retry 1/10: BOOM: simulated read failure 2026/03/28 05:17:22 DEBUG : Open with options = [RangeOption(10485760,10485760)] 2026/03/28 05:17:23 DEBUG : Returning error reader 2026/03/28 05:17:23 DEBUG : BOOM: simulated read failure 2026/03/28 05:17:23 DEBUG : test-multithread-abort: Reopening on read failure after offset 0 bytes: retry 2/10: BOOM: simulated read failure 2026/03/28 05:17:23 DEBUG : Open with options = [RangeOption(10485760,10485760)] 2026/03/28 05:17:24 DEBUG : Returning error reader 2026/03/28 05:17:24 DEBUG : BOOM: simulated read failure 2026/03/28 05:17:24 DEBUG : test-multithread-abort: Reopening on read failure after offset 0 bytes: retry 3/10: BOOM: simulated read failure 2026/03/28 05:17:24 DEBUG : Open with options = [RangeOption(10485760,10485760)] 2026/03/28 05:17:25 DEBUG : Returning error reader 2026/03/28 05:17:25 DEBUG : BOOM: simulated read failure 2026/03/28 05:17:25 DEBUG : test-multithread-abort: Reopening on read failure after offset 0 bytes: retry 4/10: BOOM: simulated read failure 2026/03/28 05:17:25 DEBUG : Open with options = [RangeOption(10485760,10485760)] 2026/03/28 05:17:26 DEBUG : Returning error reader 2026/03/28 05:17:26 DEBUG : BOOM: simulated read failure 2026/03/28 05:17:26 DEBUG : test-multithread-abort: Reopening on read failure after offset 0 bytes: retry 5/10: BOOM: simulated read failure 2026/03/28 05:17:26 DEBUG : Open with options = [RangeOption(10485760,10485760)] 2026/03/28 05:17:27 DEBUG : Returning error reader 2026/03/28 05:17:27 DEBUG : BOOM: simulated read failure 2026/03/28 05:17:27 DEBUG : test-multithread-abort: Reopening on read failure after offset 0 bytes: retry 6/10: BOOM: simulated read failure 2026/03/28 05:17:27 DEBUG : Open with options = [RangeOption(10485760,10485760)] 2026/03/28 05:17:28 DEBUG : Returning error reader 2026/03/28 05:17:28 DEBUG : BOOM: simulated read failure 2026/03/28 05:17:28 DEBUG : test-multithread-abort: Reopening on read failure after offset 0 bytes: retry 7/10: BOOM: simulated read failure 2026/03/28 05:17:28 DEBUG : Open with options = [RangeOption(10485760,10485760)] 2026/03/28 05:17:29 DEBUG : Returning error reader 2026/03/28 05:17:29 DEBUG : BOOM: simulated read failure 2026/03/28 05:17:29 DEBUG : test-multithread-abort: Reopening on read failure after offset 0 bytes: retry 8/10: BOOM: simulated read failure 2026/03/28 05:17:29 DEBUG : Open with options = [RangeOption(10485760,10485760)] 2026/03/28 05:17:30 DEBUG : Returning error reader 2026/03/28 05:17:30 DEBUG : BOOM: simulated read failure 2026/03/28 05:17:30 DEBUG : test-multithread-abort: Reopening on read failure after offset 0 bytes: retry 9/10: BOOM: simulated read failure 2026/03/28 05:17:30 DEBUG : Open with options = [RangeOption(10485760,10485760)] 2026/03/28 05:17:31 DEBUG : Returning error reader 2026/03/28 05:17:31 DEBUG : BOOM: simulated read failure 2026/03/28 05:17:31 DEBUG : test-multithread-abort: Reopening on read failure after offset 0 bytes: retry 10/10: BOOM: simulated read failure 2026/03/28 05:17:31 DEBUG : test-multithread-abort: Reopen failed after offset 0 bytes read: failed to reopen: too many retries 2026/03/28 05:17:31 DEBUG : test-multithread-abort: multi-thread copy: chunk 3/3 failed: multi-thread copy: failed to write chunk: BOOM: simulated read failure 2026/03/28 05:17:31 DEBUG : test-multithread-abort: multi-thread copy: cancelling transfer on exit 2026/03/28 05:17:32 DEBUG : test-multithread-abort: multipart upload "ABPnzm5FxEeDlrfJ0HbnJ9Gj4QXcksq_HKeWVKUAqCCPSNspOc0XSuorcpa5gnpJXuqYvkQ" aborted --- PASS: TestMultithreadCopyAbort (15.81s) === RUN TestSizeDiffers 2026/03/28 05:17:33 DEBUG : a: size = 0 OK 2026/03/28 05:17:33 DEBUG : a: size = 1 (memory) 2026/03/28 05:17:33 DEBUG : a: size = 2 (memory) --- PASS: TestSizeDiffers (0.00s) === RUN TestReOpen === RUN TestReOpen/Normal === RUN TestReOpen/Normal/Basics 2026/03/28 05:17:33 DEBUG : potato: Seek from 10 to 0 === RUN TestReOpen/Normal/ErrorAtStart === RUN TestReOpen/Normal/WithErrors 2026/03/28 05:17:33 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 1/10: test error 2026/03/28 05:17:33 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 2/10: test error 2026/03/28 05:17:33 DEBUG : potato: Reopening on read failure after offset 6 bytes: retry 3/10: test error === RUN TestReOpen/Normal/TooManyErrors 2026/03/28 05:17:33 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 1/3: test error 2026/03/28 05:17:33 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 2/3: test error 2026/03/28 05:17:33 DEBUG : potato: Reopening on read failure after offset 6 bytes: retry 3/3: test error 2026/03/28 05:17:33 DEBUG : potato: Reopen failed after offset 6 bytes read: failed to reopen: too many retries === RUN TestReOpen/Normal/ReadAt 2026/03/28 05:17:33 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 0/10: test error 2026/03/28 05:17:33 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 1/10: test error 2026/03/28 05:17:33 DEBUG : potato: Seek from 5 to 1 === RUN TestReOpen/Normal/Seek 2026/03/28 05:17:33 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 0/10: test error 2026/03/28 05:17:33 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 1/10: test error 2026/03/28 05:17:33 DEBUG : potato: Seek from 5 to 2 === RUN TestReOpen/Normal/AccountRead === RUN TestReOpen/Normal/AccountReadDelay 2026/03/28 05:17:33 DEBUG : potato: Seek from 10 to 0 2026/03/28 05:17:33 DEBUG : potato: Seek from 10 to 0 2026/03/28 05:17:33 DEBUG : potato: Seek from 10 to 0 === RUN TestReOpen/Normal/AccountReadError === RUN TestReOpen/WithRangeOption === RUN TestReOpen/WithRangeOption/Basics 2026/03/28 05:17:33 DEBUG : potato: Seek from 7 to 0 === RUN TestReOpen/WithRangeOption/ErrorAtStart === RUN TestReOpen/WithRangeOption/WithErrors 2026/03/28 05:17:33 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 1/10: test error 2026/03/28 05:17:33 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 2/10: test error 2026/03/28 05:17:33 DEBUG : potato: Reopening on read failure after offset 6 bytes: retry 3/10: test error === RUN TestReOpen/WithRangeOption/TooManyErrors 2026/03/28 05:17:33 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 1/3: test error 2026/03/28 05:17:33 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 2/3: test error 2026/03/28 05:17:33 DEBUG : potato: Reopening on read failure after offset 6 bytes: retry 3/3: test error 2026/03/28 05:17:33 DEBUG : potato: Reopen failed after offset 6 bytes read: failed to reopen: too many retries === RUN TestReOpen/WithRangeOption/ReadAt 2026/03/28 05:17:33 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 0/10: test error 2026/03/28 05:17:33 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 1/10: test error 2026/03/28 05:17:33 DEBUG : potato: Seek from 5 to 1 === RUN TestReOpen/WithRangeOption/Seek 2026/03/28 05:17:33 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 0/10: test error 2026/03/28 05:17:33 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 1/10: test error 2026/03/28 05:17:33 DEBUG : potato: Seek from 5 to 2 2026/03/28 05:17:33 DEBUG : potato: Seek from 7 to 4 === RUN TestReOpen/WithRangeOption/AccountRead === RUN TestReOpen/WithRangeOption/AccountReadDelay 2026/03/28 05:17:33 DEBUG : potato: Seek from 7 to 0 2026/03/28 05:17:33 DEBUG : potato: Seek from 7 to 0 2026/03/28 05:17:33 DEBUG : potato: Seek from 7 to 0 === RUN TestReOpen/WithRangeOption/AccountReadError === RUN TestReOpen/WithSeekOption === RUN TestReOpen/WithSeekOption/Basics 2026/03/28 05:17:33 DEBUG : potato: Seek from 8 to 0 === RUN TestReOpen/WithSeekOption/ErrorAtStart === RUN TestReOpen/WithSeekOption/WithErrors 2026/03/28 05:17:33 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 1/10: test error 2026/03/28 05:17:33 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 2/10: test error 2026/03/28 05:17:33 DEBUG : potato: Reopening on read failure after offset 6 bytes: retry 3/10: test error === RUN TestReOpen/WithSeekOption/TooManyErrors 2026/03/28 05:17:33 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 1/3: test error 2026/03/28 05:17:33 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 2/3: test error 2026/03/28 05:17:33 DEBUG : potato: Reopening on read failure after offset 6 bytes: retry 3/3: test error 2026/03/28 05:17:33 DEBUG : potato: Reopen failed after offset 6 bytes read: failed to reopen: too many retries === RUN TestReOpen/WithSeekOption/ReadAt 2026/03/28 05:17:33 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 0/10: test error 2026/03/28 05:17:33 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 1/10: test error 2026/03/28 05:17:33 DEBUG : potato: Seek from 5 to 1 === RUN TestReOpen/WithSeekOption/Seek 2026/03/28 05:17:33 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 0/10: test error 2026/03/28 05:17:33 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 1/10: test error 2026/03/28 05:17:33 DEBUG : potato: Seek from 5 to 2 2026/03/28 05:17:33 DEBUG : potato: Seek from 7 to 5 === RUN TestReOpen/WithSeekOption/AccountRead === RUN TestReOpen/WithSeekOption/AccountReadDelay 2026/03/28 05:17:33 DEBUG : potato: Seek from 8 to 0 2026/03/28 05:17:33 DEBUG : potato: Seek from 8 to 0 2026/03/28 05:17:33 DEBUG : potato: Seek from 8 to 0 === RUN TestReOpen/WithSeekOption/AccountReadError === RUN TestReOpen/UnknownSize === RUN TestReOpen/UnknownSize/Basics 2026/03/28 05:17:33 DEBUG : potato: Seek from 9 to 0 === RUN TestReOpen/UnknownSize/ErrorAtStart === RUN TestReOpen/UnknownSize/WithErrors 2026/03/28 05:17:33 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 1/10: test error 2026/03/28 05:17:33 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 2/10: test error 2026/03/28 05:17:33 DEBUG : potato: Reopening on read failure after offset 6 bytes: retry 3/10: test error === RUN TestReOpen/UnknownSize/TooManyErrors 2026/03/28 05:17:33 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 1/3: test error 2026/03/28 05:17:33 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 2/3: test error 2026/03/28 05:17:33 DEBUG : potato: Reopening on read failure after offset 6 bytes: retry 3/3: test error 2026/03/28 05:17:33 DEBUG : potato: Reopen failed after offset 6 bytes read: failed to reopen: too many retries === RUN TestReOpen/UnknownSize/ReadAt 2026/03/28 05:17:33 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 0/10: test error 2026/03/28 05:17:33 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 1/10: test error 2026/03/28 05:17:33 DEBUG : potato: Seek from 5 to 1 === RUN TestReOpen/UnknownSize/Seek 2026/03/28 05:17:33 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 0/10: test error 2026/03/28 05:17:33 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 1/10: test error 2026/03/28 05:17:33 DEBUG : potato: Seek from 5 to 2 2026/03/28 05:17:33 DEBUG : potato: Seek from 7 to 6 === RUN TestReOpen/UnknownSize/AccountRead === RUN TestReOpen/UnknownSize/AccountReadDelay 2026/03/28 05:17:33 DEBUG : potato: Seek from 9 to 0 2026/03/28 05:17:33 DEBUG : potato: Seek from 9 to 0 2026/03/28 05:17:33 DEBUG : potato: Seek from 9 to 0 === RUN TestReOpen/UnknownSize/AccountReadError --- PASS: TestReOpen (0.00s) --- PASS: TestReOpen/Normal (0.00s) --- PASS: TestReOpen/Normal/Basics (0.00s) --- PASS: TestReOpen/Normal/ErrorAtStart (0.00s) --- PASS: TestReOpen/Normal/WithErrors (0.00s) --- PASS: TestReOpen/Normal/TooManyErrors (0.00s) --- PASS: TestReOpen/Normal/ReadAt (0.00s) --- PASS: TestReOpen/Normal/Seek (0.00s) --- PASS: TestReOpen/Normal/AccountRead (0.00s) --- PASS: TestReOpen/Normal/AccountReadDelay (0.00s) --- PASS: TestReOpen/Normal/AccountReadError (0.00s) --- PASS: TestReOpen/WithRangeOption (0.00s) --- PASS: TestReOpen/WithRangeOption/Basics (0.00s) --- PASS: TestReOpen/WithRangeOption/ErrorAtStart (0.00s) --- PASS: TestReOpen/WithRangeOption/WithErrors (0.00s) --- PASS: TestReOpen/WithRangeOption/TooManyErrors (0.00s) --- PASS: TestReOpen/WithRangeOption/ReadAt (0.00s) --- PASS: TestReOpen/WithRangeOption/Seek (0.00s) --- PASS: TestReOpen/WithRangeOption/AccountRead (0.00s) --- PASS: TestReOpen/WithRangeOption/AccountReadDelay (0.00s) --- PASS: TestReOpen/WithRangeOption/AccountReadError (0.00s) --- PASS: TestReOpen/WithSeekOption (0.00s) --- PASS: TestReOpen/WithSeekOption/Basics (0.00s) --- PASS: TestReOpen/WithSeekOption/ErrorAtStart (0.00s) --- PASS: TestReOpen/WithSeekOption/WithErrors (0.00s) --- PASS: TestReOpen/WithSeekOption/TooManyErrors (0.00s) --- PASS: TestReOpen/WithSeekOption/ReadAt (0.00s) --- PASS: TestReOpen/WithSeekOption/Seek (0.00s) --- PASS: TestReOpen/WithSeekOption/AccountRead (0.00s) --- PASS: TestReOpen/WithSeekOption/AccountReadDelay (0.00s) --- PASS: TestReOpen/WithSeekOption/AccountReadError (0.00s) --- PASS: TestReOpen/UnknownSize (0.00s) --- PASS: TestReOpen/UnknownSize/Basics (0.00s) --- PASS: TestReOpen/UnknownSize/ErrorAtStart (0.00s) --- PASS: TestReOpen/UnknownSize/WithErrors (0.00s) --- PASS: TestReOpen/UnknownSize/TooManyErrors (0.00s) --- PASS: TestReOpen/UnknownSize/ReadAt (0.00s) --- PASS: TestReOpen/UnknownSize/Seek (0.00s) --- PASS: TestReOpen/UnknownSize/AccountRead (0.00s) --- PASS: TestReOpen/UnknownSize/AccountReadDelay (0.00s) --- PASS: TestReOpen/UnknownSize/AccountReadError (0.00s) === RUN TestCheck run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" === RUN TestCheck/1 === RUN TestCheck/2 === RUN TestCheck/3 === RUN TestCheck/4 === RUN TestCheck/5 === RUN TestCheck/6 === RUN TestCheck/7 --- PASS: TestCheck (9.09s) --- PASS: TestCheck/1 (0.28s) --- PASS: TestCheck/2 (0.20s) --- PASS: TestCheck/3 (0.21s) --- PASS: TestCheck/4 (0.28s) --- PASS: TestCheck/5 (0.20s) --- PASS: TestCheck/6 (0.21s) --- PASS: TestCheck/7 (0.20s) === RUN TestCheckFsError 2026/03/28 05:17:42 DEBUG : Creating backend with remote "nonexistent" 2026/03/28 05:17:42 DEBUG : Config file has changed externally - reloading 2026/03/28 05:17:42 DEBUG : Creating backend with remote "nonexistent" 2026/03/28 05:17:42 DEBUG : Local file system at /home/rclone/go/src/github.com/rclone/rclone/fs/operations/nonexistent: Waiting for checks to finish 2026/03/28 05:17:42 ERROR : Local file system at /home/rclone/go/src/github.com/rclone/rclone/fs/operations/nonexistent: error reading source root directory: directory not found 2026/03/28 05:17:42 NOTICE: Local file system at /home/rclone/go/src/github.com/rclone/rclone/fs/operations/nonexistent: 0 differences found 2026/03/28 05:17:42 NOTICE: Local file system at /home/rclone/go/src/github.com/rclone/rclone/fs/operations/nonexistent: 2 errors while checking --- PASS: TestCheckFsError (0.00s) === RUN TestCheckDownload run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" === RUN TestCheckDownload/1 === RUN TestCheckDownload/2 === RUN TestCheckDownload/3 === RUN TestCheckDownload/4 === RUN TestCheckDownload/5 === RUN TestCheckDownload/6 === RUN TestCheckDownload/7 --- PASS: TestCheckDownload (10.60s) --- PASS: TestCheckDownload/1 (0.39s) --- PASS: TestCheckDownload/2 (0.39s) --- PASS: TestCheckDownload/3 (0.35s) --- PASS: TestCheckDownload/4 (0.36s) --- PASS: TestCheckDownload/5 (0.40s) --- PASS: TestCheckDownload/6 (0.40s) --- PASS: TestCheckDownload/7 (0.50s) === RUN TestCheckSizeOnly run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" === RUN TestCheckSizeOnly/1 === RUN TestCheckSizeOnly/2 === RUN TestCheckSizeOnly/3 === RUN TestCheckSizeOnly/4 === RUN TestCheckSizeOnly/5 === RUN TestCheckSizeOnly/6 === RUN TestCheckSizeOnly/7 --- PASS: TestCheckSizeOnly (8.57s) --- PASS: TestCheckSizeOnly/1 (0.27s) --- PASS: TestCheckSizeOnly/2 (0.21s) --- PASS: TestCheckSizeOnly/3 (0.23s) --- PASS: TestCheckSizeOnly/4 (0.21s) --- PASS: TestCheckSizeOnly/5 (0.19s) --- PASS: TestCheckSizeOnly/6 (0.15s) --- PASS: TestCheckSizeOnly/7 (0.15s) === RUN TestCheckEqualReaders --- PASS: TestCheckEqualReaders (0.00s) === RUN TestParseSumFile run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" 2026/03/28 05:18:02 NOTICE: test.sum: improperly formatted checksum line 4 2026/03/28 05:18:02 NOTICE: test.sum: improperly formatted checksum line 5 2026/03/28 05:18:02 NOTICE: test.sum: improperly formatted checksum line 6 2026/03/28 05:18:02 NOTICE: test.sum: 2 warning(s) suppressed... 2026/03/28 05:18:03 NOTICE: test.sum: improperly formatted checksum line 4 2026/03/28 05:18:03 NOTICE: test.sum: improperly formatted checksum line 5 2026/03/28 05:18:03 NOTICE: test.sum: improperly formatted checksum line 6 2026/03/28 05:18:03 NOTICE: test.sum: 2 warning(s) suppressed... --- PASS: TestParseSumFile (2.57s) === RUN TestCheckSum run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" 2026/03/28 05:18:04 DEBUG : Creating backend with remote "TestS3GCS:rclone-test-wiqolej7luxi/data" === RUN TestCheckSum/subtest1 === RUN TestCheckSum/subtest2 === RUN TestCheckSum/subtest3 === RUN TestCheckSum/subtest4 === RUN TestCheckSum/subtest5 === RUN TestCheckSum/subtest6 === RUN TestCheckSum/subtest7 --- PASS: TestCheckSum (16.09s) --- PASS: TestCheckSum/subtest1 (0.43s) --- PASS: TestCheckSum/subtest2 (0.41s) --- PASS: TestCheckSum/subtest3 (0.45s) --- PASS: TestCheckSum/subtest4 (0.43s) --- PASS: TestCheckSum/subtest5 (0.42s) --- PASS: TestCheckSum/subtest6 (0.41s) --- PASS: TestCheckSum/subtest7 (0.43s) === RUN TestCheckSumDownload run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" 2026/03/28 05:18:20 DEBUG : Creating backend with remote "TestS3GCS:rclone-test-wiqolej7luxi/data" === RUN TestCheckSumDownload/subtest1 === RUN TestCheckSumDownload/subtest2 === RUN TestCheckSumDownload/subtest3 === RUN TestCheckSumDownload/subtest4 === RUN TestCheckSumDownload/subtest5 === RUN TestCheckSumDownload/subtest6 === RUN TestCheckSumDownload/subtest7 --- PASS: TestCheckSumDownload (17.32s) --- PASS: TestCheckSumDownload/subtest1 (0.55s) --- PASS: TestCheckSumDownload/subtest2 (0.59s) --- PASS: TestCheckSumDownload/subtest3 (0.66s) --- PASS: TestCheckSumDownload/subtest4 (0.65s) --- PASS: TestCheckSumDownload/subtest5 (0.66s) --- PASS: TestCheckSumDownload/subtest6 (0.65s) --- PASS: TestCheckSumDownload/subtest7 (0.71s) === RUN TestApplyTransforms 2026/03/28 05:18:37 DEBUG : Creating backend with remote "TestS3GCS:rclone-test-rutecuz0neba" 2026/03/28 05:18:37 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2026/03/28 05:18:37 DEBUG : Creating backend with remote "/tmp/rclone1349530896" run.go:185: Remote "S3 bucket rclone-test-rutecuz0neba", Local "Local file system at /tmp/rclone1349530896", Modify Window "1ns" 2026/03/28 05:18:38 INFO : S3 bucket rclone-test-rutecuz0neba: Bucket "rclone-test-rutecuz0neba" created with ACL "" upper checkfile vs. lower remote (without normalization) 2026/03/28 05:18:40 ERROR : hello, world!: sum not found 2026/03/28 05:18:40 ERROR : HELLO, WORLD!: file not in S3 bucket rclone-test-rutecuz0neba 2026/03/28 05:18:40 NOTICE: S3 bucket rclone-test-rutecuz0neba: 1 files missing 2026/03/28 05:18:40 NOTICE: 1 hashes missing 2026/03/28 05:18:40 NOTICE: S3 bucket rclone-test-rutecuz0neba: 1 differences found 2026/03/28 05:18:40 NOTICE: S3 bucket rclone-test-rutecuz0neba: 2 errors while checking upper checkfile vs. lower remote (with normalization) 2026/03/28 05:18:41 DEBUG : hello, world!: md5 = 65a8e27d8879283831b664bd8b7f0ad4 OK 2026/03/28 05:18:41 NOTICE: S3 bucket rclone-test-rutecuz0neba: 0 differences found 2026/03/28 05:18:41 NOTICE: S3 bucket rclone-test-rutecuz0neba: 1 matching files 2026/03/28 05:18:41 DEBUG : Creating backend with remote "TestS3GCS:rclone-test-yimecad0powi" 2026/03/28 05:18:41 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2026/03/28 05:18:41 DEBUG : Creating backend with remote "/tmp/rclone3325101212" run.go:185: Remote "S3 bucket rclone-test-yimecad0powi", Local "Local file system at /tmp/rclone3325101212", Modify Window "1ns" 2026/03/28 05:18:42 INFO : S3 bucket rclone-test-yimecad0powi: Bucket "rclone-test-yimecad0powi" created with ACL "" lower checkfile vs. upper remote (without normalization) 2026/03/28 05:18:43 ERROR : HELLO, WORLD!: sum not found 2026/03/28 05:18:43 ERROR : hello, world!: file not in S3 bucket rclone-test-yimecad0powi 2026/03/28 05:18:43 NOTICE: S3 bucket rclone-test-yimecad0powi: 1 files missing 2026/03/28 05:18:43 NOTICE: 1 hashes missing 2026/03/28 05:18:43 NOTICE: S3 bucket rclone-test-yimecad0powi: 1 differences found 2026/03/28 05:18:43 NOTICE: S3 bucket rclone-test-yimecad0powi: 2 errors while checking lower checkfile vs. upper remote (with normalization) 2026/03/28 05:18:43 DEBUG : HELLO, WORLD!: md5 = 65a8e27d8879283831b664bd8b7f0ad4 OK 2026/03/28 05:18:43 NOTICE: S3 bucket rclone-test-yimecad0powi: 0 differences found 2026/03/28 05:18:43 NOTICE: S3 bucket rclone-test-yimecad0powi: 1 matching files 2026/03/28 05:18:43 DEBUG : Creating backend with remote "TestS3GCS:rclone-test-vanoten9gole" 2026/03/28 05:18:43 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2026/03/28 05:18:43 DEBUG : Creating backend with remote "/tmp/rclone1742384106" run.go:185: Remote "S3 bucket rclone-test-vanoten9gole", Local "Local file system at /tmp/rclone1742384106", Modify Window "1ns" 2026/03/28 05:18:44 INFO : S3 bucket rclone-test-vanoten9gole: Bucket "rclone-test-vanoten9gole" created with ACL "" lower checkfile vs. upperlowermixed remote (without normalization) 2026/03/28 05:18:46 ERROR : HeLlO, wOrLd!: sum not found 2026/03/28 05:18:46 ERROR : hello, world!: file not in S3 bucket rclone-test-vanoten9gole 2026/03/28 05:18:46 NOTICE: S3 bucket rclone-test-vanoten9gole: 1 files missing 2026/03/28 05:18:46 NOTICE: 1 hashes missing 2026/03/28 05:18:46 NOTICE: S3 bucket rclone-test-vanoten9gole: 1 differences found 2026/03/28 05:18:46 NOTICE: S3 bucket rclone-test-vanoten9gole: 2 errors while checking lower checkfile vs. upperlowermixed remote (with normalization) 2026/03/28 05:18:47 DEBUG : HeLlO, wOrLd!: md5 = 65a8e27d8879283831b664bd8b7f0ad4 OK 2026/03/28 05:18:47 NOTICE: S3 bucket rclone-test-vanoten9gole: 0 differences found 2026/03/28 05:18:47 NOTICE: S3 bucket rclone-test-vanoten9gole: 1 matching files 2026/03/28 05:18:47 DEBUG : Creating backend with remote "TestS3GCS:rclone-test-niqelex6roje" 2026/03/28 05:18:47 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2026/03/28 05:18:47 DEBUG : Creating backend with remote "/tmp/rclone2728189256" run.go:185: Remote "S3 bucket rclone-test-niqelex6roje", Local "Local file system at /tmp/rclone2728189256", Modify Window "1ns" 2026/03/28 05:18:48 INFO : S3 bucket rclone-test-niqelex6roje: Bucket "rclone-test-niqelex6roje" created with ACL "" upperlowermixed checkfile vs. upper remote (without normalization) 2026/03/28 05:18:50 ERROR : HELLO, WORLD!: sum not found 2026/03/28 05:18:50 ERROR : HeLlO, wOrLd!: file not in S3 bucket rclone-test-niqelex6roje 2026/03/28 05:18:50 NOTICE: S3 bucket rclone-test-niqelex6roje: 1 files missing 2026/03/28 05:18:50 NOTICE: 1 hashes missing 2026/03/28 05:18:50 NOTICE: S3 bucket rclone-test-niqelex6roje: 1 differences found 2026/03/28 05:18:50 NOTICE: S3 bucket rclone-test-niqelex6roje: 2 errors while checking upperlowermixed checkfile vs. upper remote (with normalization) 2026/03/28 05:18:50 DEBUG : HELLO, WORLD!: md5 = 65a8e27d8879283831b664bd8b7f0ad4 OK 2026/03/28 05:18:50 NOTICE: S3 bucket rclone-test-niqelex6roje: 0 differences found 2026/03/28 05:18:50 NOTICE: S3 bucket rclone-test-niqelex6roje: 1 matching files 2026/03/28 05:18:50 DEBUG : Creating backend with remote "TestS3GCS:rclone-test-hotogup9xepa" 2026/03/28 05:18:50 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2026/03/28 05:18:50 DEBUG : Creating backend with remote "/tmp/rclone3627915715" run.go:185: Remote "S3 bucket rclone-test-hotogup9xepa", Local "Local file system at /tmp/rclone3627915715", Modify Window "1ns" 2026/03/28 05:18:51 INFO : S3 bucket rclone-test-hotogup9xepa: Bucket "rclone-test-hotogup9xepa" created with ACL "" NFD checkfile vs. NFC remote (without normalization) 2026/03/28 05:18:53 ERROR : 測試_Русский___ě_áñ: sum not found 2026/03/28 05:18:53 ERROR : 測試_Русский___ě_áñ: file not in S3 bucket rclone-test-hotogup9xepa 2026/03/28 05:18:53 NOTICE: S3 bucket rclone-test-hotogup9xepa: 1 files missing 2026/03/28 05:18:53 NOTICE: 1 hashes missing 2026/03/28 05:18:53 NOTICE: S3 bucket rclone-test-hotogup9xepa: 1 differences found 2026/03/28 05:18:53 NOTICE: S3 bucket rclone-test-hotogup9xepa: 2 errors while checking NFD checkfile vs. NFC remote (with normalization) 2026/03/28 05:18:53 DEBUG : 測試_Русский___ě_áñ: md5 = 65a8e27d8879283831b664bd8b7f0ad4 OK 2026/03/28 05:18:53 NOTICE: S3 bucket rclone-test-hotogup9xepa: 0 differences found 2026/03/28 05:18:53 NOTICE: S3 bucket rclone-test-hotogup9xepa: 1 matching files 2026/03/28 05:18:53 DEBUG : Creating backend with remote "TestS3GCS:rclone-test-kagesaj1jani" 2026/03/28 05:18:53 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2026/03/28 05:18:53 DEBUG : Creating backend with remote "/tmp/rclone1117181610" run.go:185: Remote "S3 bucket rclone-test-kagesaj1jani", Local "Local file system at /tmp/rclone1117181610", Modify Window "1ns" 2026/03/28 05:18:55 INFO : S3 bucket rclone-test-kagesaj1jani: Bucket "rclone-test-kagesaj1jani" created with ACL "" NFC checkfile vs. NFD remote (without normalization) 2026/03/28 05:18:56 ERROR : 測試_Русский___ě_áñ: sum not found 2026/03/28 05:18:56 ERROR : 測試_Русский___ě_áñ: file not in S3 bucket rclone-test-kagesaj1jani 2026/03/28 05:18:56 NOTICE: S3 bucket rclone-test-kagesaj1jani: 1 files missing 2026/03/28 05:18:56 NOTICE: 1 hashes missing 2026/03/28 05:18:56 NOTICE: S3 bucket rclone-test-kagesaj1jani: 1 differences found 2026/03/28 05:18:56 NOTICE: S3 bucket rclone-test-kagesaj1jani: 2 errors while checking NFC checkfile vs. NFD remote (with normalization) 2026/03/28 05:18:56 DEBUG : 測試_Русский___ě_áñ: md5 = 65a8e27d8879283831b664bd8b7f0ad4 OK 2026/03/28 05:18:56 NOTICE: S3 bucket rclone-test-kagesaj1jani: 0 differences found 2026/03/28 05:18:56 NOTICE: S3 bucket rclone-test-kagesaj1jani: 1 matching files 2026/03/28 05:18:56 DEBUG : Creating backend with remote "TestS3GCS:rclone-test-curuqiy9qipe" 2026/03/28 05:18:56 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2026/03/28 05:18:56 DEBUG : Creating backend with remote "/tmp/rclone1870779393" run.go:185: Remote "S3 bucket rclone-test-curuqiy9qipe", Local "Local file system at /tmp/rclone1870779393", Modify Window "1ns" 2026/03/28 05:18:58 INFO : S3 bucket rclone-test-curuqiy9qipe: Bucket "rclone-test-curuqiy9qipe" created with ACL "" NFDx2 checkfile vs. both remote (without normalization) 2026/03/28 05:18:59 ERROR : 測試_Русский___ě_áñ測試_Русский___ě_áñ: sum not found 2026/03/28 05:18:59 ERROR : 測試_Русский___ě_áñ測試_Русский___ě_áñ: file not in S3 bucket rclone-test-curuqiy9qipe 2026/03/28 05:18:59 NOTICE: S3 bucket rclone-test-curuqiy9qipe: 1 files missing 2026/03/28 05:18:59 NOTICE: 1 hashes missing 2026/03/28 05:18:59 NOTICE: S3 bucket rclone-test-curuqiy9qipe: 1 differences found 2026/03/28 05:18:59 NOTICE: S3 bucket rclone-test-curuqiy9qipe: 2 errors while checking NFDx2 checkfile vs. both remote (with normalization) 2026/03/28 05:19:01 DEBUG : 測試_Русский___ě_áñ測試_Русский___ě_áñ: md5 = 65a8e27d8879283831b664bd8b7f0ad4 OK 2026/03/28 05:19:01 NOTICE: S3 bucket rclone-test-curuqiy9qipe: 0 differences found 2026/03/28 05:19:01 NOTICE: S3 bucket rclone-test-curuqiy9qipe: 1 matching files 2026/03/28 05:19:01 DEBUG : Creating backend with remote "TestS3GCS:rclone-test-qegosum8cuwe" 2026/03/28 05:19:01 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2026/03/28 05:19:01 DEBUG : Creating backend with remote "/tmp/rclone3279282938" run.go:185: Remote "S3 bucket rclone-test-qegosum8cuwe", Local "Local file system at /tmp/rclone3279282938", Modify Window "1ns" 2026/03/28 05:19:02 INFO : S3 bucket rclone-test-qegosum8cuwe: Bucket "rclone-test-qegosum8cuwe" created with ACL "" NFCx2 checkfile vs. both remote (without normalization) 2026/03/28 05:19:04 ERROR : 測試_Русский___ě_áñ測試_Русский___ě_áñ: sum not found 2026/03/28 05:19:04 ERROR : 測試_Русский___ě_áñ測試_Русский___ě_áñ: file not in S3 bucket rclone-test-qegosum8cuwe 2026/03/28 05:19:04 NOTICE: S3 bucket rclone-test-qegosum8cuwe: 1 files missing 2026/03/28 05:19:04 NOTICE: 1 hashes missing 2026/03/28 05:19:04 NOTICE: S3 bucket rclone-test-qegosum8cuwe: 1 differences found 2026/03/28 05:19:04 NOTICE: S3 bucket rclone-test-qegosum8cuwe: 2 errors while checking NFCx2 checkfile vs. both remote (with normalization) 2026/03/28 05:19:05 DEBUG : 測試_Русский___ě_áñ測試_Русский___ě_áñ: md5 = 65a8e27d8879283831b664bd8b7f0ad4 OK 2026/03/28 05:19:05 NOTICE: S3 bucket rclone-test-qegosum8cuwe: 0 differences found 2026/03/28 05:19:05 NOTICE: S3 bucket rclone-test-qegosum8cuwe: 1 matching files 2026/03/28 05:19:05 DEBUG : Creating backend with remote "TestS3GCS:rclone-test-taduber8yeqe" 2026/03/28 05:19:05 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2026/03/28 05:19:05 DEBUG : Creating backend with remote "/tmp/rclone3492660606" run.go:185: Remote "S3 bucket rclone-test-taduber8yeqe", Local "Local file system at /tmp/rclone3492660606", Modify Window "1ns" 2026/03/28 05:19:06 INFO : S3 bucket rclone-test-taduber8yeqe: Bucket "rclone-test-taduber8yeqe" created with ACL "" both checkfile vs. NFDx2 remote (without normalization) 2026/03/28 05:19:07 ERROR : 測試_Русский___ě_áñ測試_Русский___ě_áñ: sum not found 2026/03/28 05:19:07 ERROR : 測試_Русский___ě_áñ測試_Русский___ě_áñ: file not in S3 bucket rclone-test-taduber8yeqe 2026/03/28 05:19:07 NOTICE: S3 bucket rclone-test-taduber8yeqe: 1 files missing 2026/03/28 05:19:07 NOTICE: 1 hashes missing 2026/03/28 05:19:07 NOTICE: S3 bucket rclone-test-taduber8yeqe: 1 differences found 2026/03/28 05:19:07 NOTICE: S3 bucket rclone-test-taduber8yeqe: 2 errors while checking both checkfile vs. NFDx2 remote (with normalization) 2026/03/28 05:19:08 DEBUG : 測試_Русский___ě_áñ測試_Русский___ě_áñ: md5 = 65a8e27d8879283831b664bd8b7f0ad4 OK 2026/03/28 05:19:08 NOTICE: S3 bucket rclone-test-taduber8yeqe: 0 differences found 2026/03/28 05:19:08 NOTICE: S3 bucket rclone-test-taduber8yeqe: 1 matching files 2026/03/28 05:19:08 DEBUG : Creating backend with remote "TestS3GCS:rclone-test-yekatel2yila" 2026/03/28 05:19:08 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2026/03/28 05:19:08 DEBUG : Creating backend with remote "/tmp/rclone1485044762" run.go:185: Remote "S3 bucket rclone-test-yekatel2yila", Local "Local file system at /tmp/rclone1485044762", Modify Window "1ns" 2026/03/28 05:19:08 INFO : S3 bucket rclone-test-yekatel2yila: Bucket "rclone-test-yekatel2yila" created with ACL "" both checkfile vs. NFCx2 remote (without normalization) 2026/03/28 05:19:10 ERROR : 測試_Русский___ě_áñ測試_Русский___ě_áñ: sum not found 2026/03/28 05:19:10 ERROR : 測試_Русский___ě_áñ測試_Русский___ě_áñ: file not in S3 bucket rclone-test-yekatel2yila 2026/03/28 05:19:10 NOTICE: S3 bucket rclone-test-yekatel2yila: 1 files missing 2026/03/28 05:19:10 NOTICE: 1 hashes missing 2026/03/28 05:19:10 NOTICE: S3 bucket rclone-test-yekatel2yila: 1 differences found 2026/03/28 05:19:10 NOTICE: S3 bucket rclone-test-yekatel2yila: 2 errors while checking both checkfile vs. NFCx2 remote (with normalization) 2026/03/28 05:19:11 DEBUG : 測試_Русский___ě_áñ測試_Русский___ě_áñ: md5 = 65a8e27d8879283831b664bd8b7f0ad4 OK 2026/03/28 05:19:11 NOTICE: S3 bucket rclone-test-yekatel2yila: 0 differences found 2026/03/28 05:19:11 NOTICE: S3 bucket rclone-test-yekatel2yila: 1 matching files 2026/03/28 05:19:11 DEBUG : S3 bucket rclone-test-yekatel2yila: Purge remote 2026/03/28 05:19:11 DEBUG : S3 bucket rclone-test-yekatel2yila: bucket is versioned: false 2026/03/28 05:19:11 DEBUG : Waiting for deletions to finish 2026/03/28 05:19:11 DEBUG : "測試_Русский___ě_áñ測試_Русский___ě_áñ" version false 2026/03/28 05:19:11 DEBUG : 測試_Русский___ě_áñ測試_Русский___ě_áñ: Deleting (id "") 2026/03/28 05:19:12 INFO : 測試_Русский___ě_áñ測試_Русский___ě_áñ: Deleted 2026/03/28 05:19:12 INFO : S3 bucket rclone-test-yekatel2yila: Bucket "rclone-test-yekatel2yila" deleted 2026/03/28 05:19:12 DEBUG : S3 bucket rclone-test-taduber8yeqe: Purge remote 2026/03/28 05:19:12 DEBUG : S3 bucket rclone-test-taduber8yeqe: bucket is versioned: false 2026/03/28 05:19:12 DEBUG : Waiting for deletions to finish 2026/03/28 05:19:13 DEBUG : "測試_Русский___ě_áñ測試_Русский___ě_áñ" version false 2026/03/28 05:19:13 DEBUG : 測試_Русский___ě_áñ測試_Русский___ě_áñ: Deleting (id "") 2026/03/28 05:19:13 INFO : 測試_Русский___ě_áñ測試_Русский___ě_áñ: Deleted 2026/03/28 05:19:14 INFO : S3 bucket rclone-test-taduber8yeqe: Bucket "rclone-test-taduber8yeqe" deleted 2026/03/28 05:19:14 DEBUG : S3 bucket rclone-test-qegosum8cuwe: Purge remote 2026/03/28 05:19:14 DEBUG : S3 bucket rclone-test-qegosum8cuwe: bucket is versioned: false 2026/03/28 05:19:14 DEBUG : Waiting for deletions to finish 2026/03/28 05:19:14 DEBUG : "測試_Русский___ě_áñ測試_Русский___ě_áñ" version false 2026/03/28 05:19:14 DEBUG : 測試_Русский___ě_áñ測試_Русский___ě_áñ: Deleting (id "") 2026/03/28 05:19:15 INFO : 測試_Русский___ě_áñ測試_Русский___ě_áñ: Deleted 2026/03/28 05:19:15 INFO : S3 bucket rclone-test-qegosum8cuwe: Bucket "rclone-test-qegosum8cuwe" deleted 2026/03/28 05:19:15 DEBUG : S3 bucket rclone-test-curuqiy9qipe: Purge remote 2026/03/28 05:19:16 DEBUG : S3 bucket rclone-test-curuqiy9qipe: bucket is versioned: false 2026/03/28 05:19:16 DEBUG : Waiting for deletions to finish 2026/03/28 05:19:16 DEBUG : "測試_Русский___ě_áñ測試_Русский___ě_áñ" version false 2026/03/28 05:19:16 DEBUG : 測試_Русский___ě_áñ測試_Русский___ě_áñ: Deleting (id "") 2026/03/28 05:19:16 INFO : 測試_Русский___ě_áñ測試_Русский___ě_áñ: Deleted 2026/03/28 05:19:17 INFO : S3 bucket rclone-test-curuqiy9qipe: Bucket "rclone-test-curuqiy9qipe" deleted 2026/03/28 05:19:17 DEBUG : S3 bucket rclone-test-kagesaj1jani: Purge remote 2026/03/28 05:19:18 DEBUG : S3 bucket rclone-test-kagesaj1jani: bucket is versioned: false 2026/03/28 05:19:18 DEBUG : Waiting for deletions to finish 2026/03/28 05:19:18 DEBUG : "測試_Русский___ě_áñ" version false 2026/03/28 05:19:18 DEBUG : 測試_Русский___ě_áñ: Deleting (id "") 2026/03/28 05:19:18 INFO : 測試_Русский___ě_áñ: Deleted 2026/03/28 05:19:19 INFO : S3 bucket rclone-test-kagesaj1jani: Bucket "rclone-test-kagesaj1jani" deleted 2026/03/28 05:19:19 DEBUG : S3 bucket rclone-test-hotogup9xepa: Purge remote 2026/03/28 05:19:19 DEBUG : S3 bucket rclone-test-hotogup9xepa: bucket is versioned: false 2026/03/28 05:19:19 DEBUG : Waiting for deletions to finish 2026/03/28 05:19:19 DEBUG : "測試_Русский___ě_áñ" version false 2026/03/28 05:19:19 DEBUG : 測試_Русский___ě_áñ: Deleting (id "") 2026/03/28 05:19:20 INFO : 測試_Русский___ě_áñ: Deleted 2026/03/28 05:19:21 INFO : S3 bucket rclone-test-hotogup9xepa: Bucket "rclone-test-hotogup9xepa" deleted 2026/03/28 05:19:21 DEBUG : S3 bucket rclone-test-niqelex6roje: Purge remote 2026/03/28 05:19:21 DEBUG : S3 bucket rclone-test-niqelex6roje: bucket is versioned: false 2026/03/28 05:19:21 DEBUG : Waiting for deletions to finish 2026/03/28 05:19:21 DEBUG : "HELLO, WORLD!" version false 2026/03/28 05:19:21 DEBUG : HELLO, WORLD!: Deleting (id "") 2026/03/28 05:19:22 INFO : HELLO, WORLD!: Deleted 2026/03/28 05:19:22 INFO : S3 bucket rclone-test-niqelex6roje: Bucket "rclone-test-niqelex6roje" deleted 2026/03/28 05:19:22 DEBUG : S3 bucket rclone-test-vanoten9gole: Purge remote 2026/03/28 05:19:23 DEBUG : S3 bucket rclone-test-vanoten9gole: bucket is versioned: false 2026/03/28 05:19:23 DEBUG : Waiting for deletions to finish 2026/03/28 05:19:23 DEBUG : "HeLlO, wOrLd!" version false 2026/03/28 05:19:23 DEBUG : HeLlO, wOrLd!: Deleting (id "") 2026/03/28 05:19:23 INFO : HeLlO, wOrLd!: Deleted 2026/03/28 05:19:24 INFO : S3 bucket rclone-test-vanoten9gole: Bucket "rclone-test-vanoten9gole" deleted 2026/03/28 05:19:24 DEBUG : S3 bucket rclone-test-yimecad0powi: Purge remote 2026/03/28 05:19:24 DEBUG : S3 bucket rclone-test-yimecad0powi: bucket is versioned: false 2026/03/28 05:19:24 DEBUG : Waiting for deletions to finish 2026/03/28 05:19:25 DEBUG : "HELLO, WORLD!" version false 2026/03/28 05:19:25 DEBUG : HELLO, WORLD!: Deleting (id "") 2026/03/28 05:19:25 INFO : HELLO, WORLD!: Deleted 2026/03/28 05:19:26 INFO : S3 bucket rclone-test-yimecad0powi: Bucket "rclone-test-yimecad0powi" deleted 2026/03/28 05:19:26 DEBUG : S3 bucket rclone-test-rutecuz0neba: Purge remote 2026/03/28 05:19:26 DEBUG : S3 bucket rclone-test-rutecuz0neba: bucket is versioned: false 2026/03/28 05:19:26 DEBUG : Waiting for deletions to finish 2026/03/28 05:19:26 DEBUG : "hello, world!" version false 2026/03/28 05:19:26 DEBUG : hello, world!: Deleting (id "") 2026/03/28 05:19:26 INFO : hello, world!: Deleted 2026/03/28 05:19:27 INFO : S3 bucket rclone-test-rutecuz0neba: Bucket "rclone-test-rutecuz0neba" deleted --- PASS: TestApplyTransforms (49.60s) === RUN TestTruncateString --- PASS: TestTruncateString (0.00s) === RUN TestCopyFile run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" 2026/03/28 05:19:27 DEBUG : file1: Need to transfer - File not found at Destination 2026/03/28 05:19:28 DEBUG : sub/file2: size = 14 OK 2026/03/28 05:19:28 DEBUG : file1: md5 = 0ef726ce9b1a7692357ff70dd321d595 OK 2026/03/28 05:19:28 INFO : file1: Copied (new) to: sub/file2 2026/03/28 05:19:28 DEBUG : sub/file2: size = 14 OK 2026/03/28 05:19:28 DEBUG : file1: Size and modification time the same (differ by 0s, within tolerance 1ns) 2026/03/28 05:19:28 DEBUG : file1: Unchanged skipping 2026/03/28 05:19:28 DEBUG : S3 bucket rclone-test-wiqolej7luxi: don't need to copy/move sub/file2, it is already at target location --- PASS: TestCopyFile (2.40s) === RUN TestCopyLongFile run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" copy_test.go:154: Test only runs on local --- SKIP: TestCopyLongFile (0.27s) === RUN TestCopyFileBackupDir run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" 2026/03/28 05:19:30 DEBUG : Creating backend with remote "TestS3GCS:rclone-test-wiqolej7luxi/backup" 2026/03/28 05:19:31 DEBUG : dst/file1: size = 14 (Local file system at /tmp/rclone1365695657) 2026/03/28 05:19:31 DEBUG : dst/file1: size = 18 (S3 bucket rclone-test-wiqolej7luxi) 2026/03/28 05:19:31 DEBUG : dst/file1: Sizes differ 2026/03/28 05:19:32 DEBUG : dst/file1: size = 18 OK 2026/03/28 05:19:32 DEBUG : dst/file1: md5 = 05164b153084ba910184c26e561a7c18 OK 2026/03/28 05:19:32 INFO : dst/file1: Copied (server-side copy) 2026/03/28 05:19:32 INFO : dst/file1: Deleted 2026/03/28 05:19:32 DEBUG : dst/file1: size = 14 OK 2026/03/28 05:19:32 DEBUG : dst/file1: md5 = 0ef726ce9b1a7692357ff70dd321d595 OK 2026/03/28 05:19:32 INFO : dst/file1: Copied (new) --- PASS: TestCopyFileBackupDir (4.15s) === RUN TestCopyFileCompareDest run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" 2026/03/28 05:19:34 DEBUG : Creating backend with remote "TestS3GCS:rclone-test-wiqolej7luxi/dst" 2026/03/28 05:19:34 DEBUG : Creating backend with remote "TestS3GCS:rclone-test-wiqolej7luxi/CompareDest" 2026/03/28 05:19:35 DEBUG : one: Need to transfer - File not found at Destination 2026/03/28 05:19:36 DEBUG : one: size = 3 OK 2026/03/28 05:19:36 DEBUG : one: md5 = f97c5d29941bfb1b2fdab0874906ab82 OK 2026/03/28 05:19:36 INFO : one: Copied (new) 2026/03/28 05:19:37 DEBUG : one: size = 5 (Local file system at /tmp/rclone1365695657) 2026/03/28 05:19:37 DEBUG : one: size = 3 (S3 bucket rclone-test-wiqolej7luxi path dst) 2026/03/28 05:19:37 DEBUG : one: Sizes differ 2026/03/28 05:19:38 DEBUG : one: size = 5 OK 2026/03/28 05:19:38 DEBUG : one: md5 = 07912d142f5d63ee918b34796b5a2432 OK 2026/03/28 05:19:38 INFO : one: Copied (replaced existing) 2026/03/28 05:19:39 DEBUG : one: size = 5 (Local file system at /tmp/rclone1365695657) 2026/03/28 05:19:39 DEBUG : one: size = 3 (S3 bucket rclone-test-wiqolej7luxi path dst) 2026/03/28 05:19:39 DEBUG : one: Sizes differ 2026/03/28 05:19:39 DEBUG : one: size = 5 OK 2026/03/28 05:19:39 DEBUG : one: Size and modification time the same (differ by 0s, within tolerance 1ns) 2026/03/28 05:19:39 DEBUG : one: Destination found in --compare-dest, skipping 2026/03/28 05:19:41 DEBUG : two: Need to transfer - File not found at Destination 2026/03/28 05:19:41 DEBUG : two: size = 3 OK 2026/03/28 05:19:41 DEBUG : two: Size and modification time the same (differ by 0s, within tolerance 1ns) 2026/03/28 05:19:41 DEBUG : two: Destination found in --compare-dest, skipping 2026/03/28 05:19:42 DEBUG : two: Need to transfer - File not found at Destination 2026/03/28 05:19:42 DEBUG : two: size = 3 OK 2026/03/28 05:19:42 DEBUG : two: Size and modification time the same (differ by 0s, within tolerance 1ns) 2026/03/28 05:19:42 DEBUG : two: Destination found in --compare-dest, skipping 2026/03/28 05:19:43 DEBUG : two: Need to transfer - File not found at Destination 2026/03/28 05:19:43 DEBUG : two: size = 5 (Local file system at /tmp/rclone1365695657) 2026/03/28 05:19:43 DEBUG : two: size = 3 (S3 bucket rclone-test-wiqolej7luxi path CompareDest) 2026/03/28 05:19:43 DEBUG : two: Sizes differ 2026/03/28 05:19:44 DEBUG : two: size = 5 OK 2026/03/28 05:19:44 DEBUG : two: md5 = 2379e4ce8c3380e996ab0509f17069ad OK 2026/03/28 05:19:44 INFO : two: Copied (new) --- PASS: TestCopyFileCompareDest (12.29s) === RUN TestCopyFileCopyDest run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" 2026/03/28 05:19:46 DEBUG : Creating backend with remote "TestS3GCS:rclone-test-wiqolej7luxi/dst" 2026/03/28 05:19:47 DEBUG : Creating backend with remote "TestS3GCS:rclone-test-wiqolej7luxi/CopyDest" 2026/03/28 05:19:47 DEBUG : one: Need to transfer - File not found at Destination 2026/03/28 05:19:48 DEBUG : one: size = 3 OK 2026/03/28 05:19:48 DEBUG : one: md5 = f97c5d29941bfb1b2fdab0874906ab82 OK 2026/03/28 05:19:48 INFO : one: Copied (new) 2026/03/28 05:19:49 DEBUG : one: size = 5 (Local file system at /tmp/rclone1365695657) 2026/03/28 05:19:49 DEBUG : one: size = 3 (S3 bucket rclone-test-wiqolej7luxi path dst) 2026/03/28 05:19:49 DEBUG : one: Sizes differ 2026/03/28 05:19:50 DEBUG : one: size = 5 OK 2026/03/28 05:19:50 DEBUG : one: md5 = 07912d142f5d63ee918b34796b5a2432 OK 2026/03/28 05:19:50 INFO : one: Copied (replaced existing) 2026/03/28 05:19:52 DEBUG : Creating backend with remote "TestS3GCS:rclone-test-wiqolej7luxi/BackupDir" 2026/03/28 05:19:52 DEBUG : one: size = 5 (Local file system at /tmp/rclone1365695657) 2026/03/28 05:19:52 DEBUG : one: size = 3 (S3 bucket rclone-test-wiqolej7luxi path dst) 2026/03/28 05:19:52 DEBUG : one: Sizes differ 2026/03/28 05:19:52 DEBUG : one: size = 5 OK 2026/03/28 05:19:52 DEBUG : one: Size and modification time the same (differ by 0s, within tolerance 1ns) 2026/03/28 05:19:52 DEBUG : one: size = 5 (Local file system at /tmp/rclone1365695657) 2026/03/28 05:19:52 DEBUG : one: size = 3 (S3 bucket rclone-test-wiqolej7luxi path dst) 2026/03/28 05:19:52 DEBUG : one: Sizes differ 2026/03/28 05:19:53 DEBUG : one: size = 3 OK 2026/03/28 05:19:53 DEBUG : one: md5 = f97c5d29941bfb1b2fdab0874906ab82 OK 2026/03/28 05:19:53 INFO : one: Copied (server-side copy) 2026/03/28 05:19:54 INFO : one: Deleted 2026/03/28 05:19:54 DEBUG : one: size = 5 OK 2026/03/28 05:19:54 DEBUG : one: md5 = 07912d142f5d63ee918b34796b5a2432 OK 2026/03/28 05:19:54 INFO : one: Copied (server-side copy) 2026/03/28 05:19:54 DEBUG : one: Destination found in --copy-dest, using server-side copy 2026/03/28 05:19:56 DEBUG : two: Need to transfer - File not found at Destination 2026/03/28 05:19:56 DEBUG : two: size = 3 OK 2026/03/28 05:19:56 DEBUG : two: Size and modification time the same (differ by 0s, within tolerance 1ns) 2026/03/28 05:19:57 DEBUG : two: size = 3 OK 2026/03/28 05:19:57 DEBUG : two: md5 = b8a9f715dbb64fd5c56e7783c6820a61 OK 2026/03/28 05:19:57 INFO : two: Copied (server-side copy) 2026/03/28 05:19:57 DEBUG : two: Destination found in --copy-dest, using server-side copy 2026/03/28 05:19:58 DEBUG : two: size = 3 OK 2026/03/28 05:19:58 DEBUG : two: Size and modification time the same (differ by 0s, within tolerance 1ns) 2026/03/28 05:19:58 DEBUG : two: Unchanged skipping 2026/03/28 05:20:00 DEBUG : three: Need to transfer - File not found at Destination 2026/03/28 05:20:00 DEBUG : three: size = 7 (Local file system at /tmp/rclone1365695657) 2026/03/28 05:20:00 DEBUG : three: size = 5 (S3 bucket rclone-test-wiqolej7luxi path CopyDest) 2026/03/28 05:20:00 DEBUG : three: Sizes differ 2026/03/28 05:20:00 DEBUG : three: Destination not found in --copy-dest 2026/03/28 05:20:01 DEBUG : three: size = 7 OK 2026/03/28 05:20:01 DEBUG : three: md5 = 1bccb9dccb3e9f6a3f9d2a8bdb54b7f5 OK 2026/03/28 05:20:01 INFO : three: Copied (new) --- PASS: TestCopyFileCopyDest (18.27s) === RUN TestCopyInplace run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" copy_test.go:371: Partial uploads not supported --- SKIP: TestCopyInplace (0.27s) === RUN TestCopyLongFileName run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" copy_test.go:404: Partial uploads not supported --- SKIP: TestCopyLongFileName (0.26s) === RUN TestCopyLongFileNameCollision run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" copy_test.go:437: Partial uploads not supported --- SKIP: TestCopyLongFileNameCollision (0.30s) === RUN TestCopyFileMaxTransfer run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" 2026/03/28 05:20:05 DEBUG : TestCopyFileMaxTransfer/file1: Need to transfer - File not found at Destination 2026/03/28 05:20:06 DEBUG : TestCopyFileMaxTransfer/file1: size = 14 OK 2026/03/28 05:20:06 DEBUG : TestCopyFileMaxTransfer/file1: md5 = 0ef726ce9b1a7692357ff70dd321d595 OK 2026/03/28 05:20:06 INFO : TestCopyFileMaxTransfer/file1: Copied (new) 2026/03/28 05:20:06 DEBUG : TestCopyFileMaxTransfer/file2: Need to transfer - File not found at Destination 2026/03/28 05:20:06 ERROR : TestCopyFileMaxTransfer/file2: Failed to copy: operation error S3: PutObject, exceeded maximum number of attempts, 1, https response error StatusCode: 0, RequestID: , HostID: , request send failed, Put "https://rclone-test-wiqolej7luxi.storage.googleapis.com/TestCopyFileMaxTransfer/file2": max transfer limit reached as set by --max-transfer 2026/03/28 05:20:07 DEBUG : TestCopyFileMaxTransfer/file3: Need to transfer - File not found at Destination 2026/03/28 05:20:07 DEBUG : TestCopyFileMaxTransfer/file4: Need to transfer - File not found at Destination 2026/03/28 05:20:07 DEBUG : TestCopyFileMaxTransfer/file4: size = 2062 OK 2026/03/28 05:20:07 DEBUG : TestCopyFileMaxTransfer/file4: md5 = 12da335bb0f455e2af34f8d429a2b1ed OK 2026/03/28 05:20:07 INFO : TestCopyFileMaxTransfer/file4: Copied (new) --- PASS: TestCopyFileMaxTransfer (3.75s) === RUN TestDeduplicateInteractive run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" dedupe_test.go:24: Can't test deduplicate - no duplicate files possible --- SKIP: TestDeduplicateInteractive (0.28s) === RUN TestDeduplicateSkip run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" dedupe_test.go:24: Can't test deduplicate - no duplicate files possible --- SKIP: TestDeduplicateSkip (0.25s) === RUN TestDeduplicateSizeOnly run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" dedupe_test.go:24: Can't test deduplicate - no duplicate files possible --- SKIP: TestDeduplicateSizeOnly (0.26s) === RUN TestDeduplicateFirst run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" dedupe_test.go:24: Can't test deduplicate - no duplicate files possible --- SKIP: TestDeduplicateFirst (0.29s) === RUN TestDeduplicateNewest run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" dedupe_test.go:24: Can't test deduplicate - no duplicate files possible --- SKIP: TestDeduplicateNewest (0.29s) === RUN TestDeduplicateNewestByHash run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" 2026/03/28 05:20:12 INFO : S3 bucket rclone-test-wiqolej7luxi: Looking for duplicate md5 hashes using newest mode. 2026/03/28 05:20:12 NOTICE: 8c97923785a3db15afd39e1264ff4318: Found 3 files with duplicate md5 hashes 2026/03/28 05:20:13 INFO : one: Deleted 2026/03/28 05:20:13 INFO : also/one: Deleted 2026/03/28 05:20:13 NOTICE: 8c97923785a3db15afd39e1264ff4318: Deleted 2 extra copies --- PASS: TestDeduplicateNewestByHash (4.38s) === RUN TestDeduplicateOldest run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" dedupe_test.go:24: Can't test deduplicate - no duplicate files possible --- SKIP: TestDeduplicateOldest (0.29s) === RUN TestDeduplicateLargest run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" dedupe_test.go:24: Can't test deduplicate - no duplicate files possible --- SKIP: TestDeduplicateLargest (0.27s) === RUN TestDeduplicateSmallest run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" dedupe_test.go:24: Can't test deduplicate - no duplicate files possible --- SKIP: TestDeduplicateSmallest (0.26s) === RUN TestDeduplicateRename run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" dedupe_test.go:24: Can't test deduplicate - no duplicate files possible --- SKIP: TestDeduplicateRename (0.26s) === RUN TestMergeDirs run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" dedupe_test.go:256: Can't merge directories --- SKIP: TestMergeDirs (0.27s) === RUN TestListDirSorted run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" 2026/03/28 05:20:20 DEBUG : a.txt: Excluded (Size Filter) 2026/03/28 05:20:20 DEBUG : a.txt: Excluded 2026/03/28 05:20:20 DEBUG : sub dir/hello world: Excluded (Size Filter) 2026/03/28 05:20:20 DEBUG : sub dir/hello world: Excluded 2026/03/28 05:20:20 DEBUG : sub dir/hello world2: Excluded (Size Filter) 2026/03/28 05:20:20 DEBUG : sub dir/hello world2: Excluded 2026/03/28 05:20:20 DEBUG : sub dir/ignore dir: Excluded 2026/03/28 05:20:21 DEBUG : sub dir/hello world: Excluded (Size Filter) 2026/03/28 05:20:21 DEBUG : sub dir/hello world: Excluded 2026/03/28 05:20:21 DEBUG : sub dir/hello world2: Excluded (Size Filter) 2026/03/28 05:20:21 DEBUG : sub dir/hello world2: Excluded 2026/03/28 05:20:21 DEBUG : sub dir/ignore dir: Excluded --- PASS: TestListDirSorted (7.41s) === RUN TestListDirSortedFn run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" 2026/03/28 05:20:27 DEBUG : a.txt: Excluded (Size Filter) 2026/03/28 05:20:27 DEBUG : a.txt: Excluded 2026/03/28 05:20:27 DEBUG : sub dir/hello world: Excluded (Size Filter) 2026/03/28 05:20:27 DEBUG : sub dir/hello world: Excluded 2026/03/28 05:20:27 DEBUG : sub dir/hello world2: Excluded (Size Filter) 2026/03/28 05:20:27 DEBUG : sub dir/hello world2: Excluded 2026/03/28 05:20:28 DEBUG : sub dir/ignore dir: Excluded 2026/03/28 05:20:28 DEBUG : sub dir/hello world: Excluded (Size Filter) 2026/03/28 05:20:28 DEBUG : sub dir/hello world: Excluded 2026/03/28 05:20:28 DEBUG : sub dir/hello world2: Excluded (Size Filter) 2026/03/28 05:20:28 DEBUG : sub dir/hello world2: Excluded 2026/03/28 05:20:28 DEBUG : sub dir/ignore dir: Excluded --- PASS: TestListDirSortedFn (7.34s) === RUN TestListJSON run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" === RUN TestListJSON/Default === RUN TestListJSON/FilesOnly === RUN TestListJSON/DirsOnly === RUN TestListJSON/Recurse === RUN TestListJSON/SubDir === RUN TestListJSON/NoModTime === RUN TestListJSON/NoMimeType === RUN TestListJSON/ShowHash === RUN TestListJSON/HashTypes === RUN TestListJSON/Metadata --- PASS: TestListJSON (4.63s) --- PASS: TestListJSON/Default (0.25s) --- PASS: TestListJSON/FilesOnly (0.26s) --- PASS: TestListJSON/DirsOnly (0.13s) --- PASS: TestListJSON/Recurse (0.41s) --- PASS: TestListJSON/SubDir (0.26s) --- PASS: TestListJSON/NoModTime (0.28s) --- PASS: TestListJSON/NoMimeType (0.27s) --- PASS: TestListJSON/ShowHash (0.25s) --- PASS: TestListJSON/HashTypes (0.27s) --- PASS: TestListJSON/Metadata (0.25s) === RUN TestStatJSON run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" === RUN TestStatJSON/Root === RUN TestStatJSON/RootFilesOnly === RUN TestStatJSON/RootDirsOnly === RUN TestStatJSON/Dir === RUN TestStatJSON/DirWithTrailingSlash === RUN TestStatJSON/File === RUN TestStatJSON/NotFound === RUN TestStatJSON/DirFilesOnly === RUN TestStatJSON/FileFilesOnly === RUN TestStatJSON/NotFoundFilesOnly === RUN TestStatJSON/DirDirsOnly === RUN TestStatJSON/FileDirsOnly === RUN TestStatJSON/NotFoundDirsOnly === RUN TestStatJSON/RootNotFound 2026/03/28 05:20:39 DEBUG : Creating backend with remote "TestS3GCS:rclone-test-wiqolej7luxi/notfound" --- PASS: TestStatJSON (4.97s) --- PASS: TestStatJSON/Root (0.13s) --- PASS: TestStatJSON/RootFilesOnly (0.00s) --- PASS: TestStatJSON/RootDirsOnly (0.14s) --- PASS: TestStatJSON/Dir (0.40s) --- PASS: TestStatJSON/DirWithTrailingSlash (0.13s) --- PASS: TestStatJSON/File (0.12s) --- PASS: TestStatJSON/NotFound (0.36s) --- PASS: TestStatJSON/DirFilesOnly (0.27s) --- PASS: TestStatJSON/FileFilesOnly (0.13s) --- PASS: TestStatJSON/NotFoundFilesOnly (0.27s) --- PASS: TestStatJSON/DirDirsOnly (0.13s) --- PASS: TestStatJSON/FileDirsOnly (0.14s) --- PASS: TestStatJSON/NotFoundDirsOnly (0.13s) --- PASS: TestStatJSON/RootNotFound (0.67s) === RUN TestMkdir run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" 2026/03/28 05:20:40 INFO : S3 bucket rclone-test-wiqolej7luxi: Making directory 2026/03/28 05:20:40 INFO : S3 bucket rclone-test-wiqolej7luxi: Making directory --- PASS: TestMkdir (0.41s) === RUN TestLsd run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" --- PASS: TestLsd (1.28s) === RUN TestLs run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" --- PASS: TestLs (2.10s) === RUN TestLsWithFilesFrom run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" 2026/03/28 05:20:45 DEBUG : empty space: Excluded (FilesFrom Filter) 2026/03/28 05:20:45 DEBUG : empty space: Excluded --- PASS: TestLsWithFilesFrom (2.37s) === RUN TestLsLong run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" --- PASS: TestLsLong (2.32s) === RUN TestHashSums run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" === RUN TestHashSums/Md5 === RUN TestHashSums/Md5Download --- PASS: TestHashSums (2.32s) --- PASS: TestHashSums/Md5 (0.13s) --- PASS: TestHashSums/Md5Download (0.27s) === RUN TestHashSumsWithErrors 2026/03/28 05:20:51 DEBUG : Creating backend with remote ":memory:" 2026/03/28 05:20:51 ERROR : file1: hash unsupported: hash type not supported --- PASS: TestHashSumsWithErrors (0.00s) === RUN TestHashStream 2026/03/28 05:20:51 DEBUG : Creating md5 hash of 0 bytes read from input stream 2026/03/28 05:20:51 DEBUG : Creating md5 hash of 0 bytes read from input stream 2026/03/28 05:20:51 DEBUG : Creating sha1 hash of 0 bytes read from input stream 2026/03/28 05:20:51 DEBUG : Creating sha1 hash of 0 bytes read from input stream 2026/03/28 05:20:51 DEBUG : Creating md5 hash of 12 bytes read from input stream 2026/03/28 05:20:51 DEBUG : Creating md5 hash of 12 bytes read from input stream 2026/03/28 05:20:51 DEBUG : Creating sha1 hash of 12 bytes read from input stream 2026/03/28 05:20:51 DEBUG : Creating sha1 hash of 12 bytes read from input stream --- PASS: TestHashStream (0.00s) === RUN TestSuffixName --- PASS: TestSuffixName (0.00s) === RUN TestCount run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" 2026/03/28 05:20:52 DEBUG : pacer: low level retry 1/1 (error operation error S3: PutObject, exceeded maximum number of attempts, 1, https response error StatusCode: 429, RequestID: , HostID: , api error SlowDown: The object exceeded the rate limit for object mutation operations (create, update, and delete). Please reduce your request rate. See https://cloud.google.com/storage/docs/gcs429.) 2026/03/28 05:20:52 DEBUG : pacer: Rate limited, increasing sleep to 10ms run.go:286: Retry Put of "empty space" to S3 bucket rclone-test-wiqolej7luxi: 1/10 (operation error S3: PutObject, exceeded maximum number of attempts, 1, https response error StatusCode: 429, RequestID: , HostID: , api error SlowDown: The object exceeded the rate limit for object mutation operations (create, update, and delete). Please reduce your request rate. See https://cloud.google.com/storage/docs/gcs429.) 2026/03/28 05:20:54 DEBUG : pacer: Reducing sleep to 0s --- PASS: TestCount (5.05s) === RUN TestDelete run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" 2026/03/28 05:20:58 DEBUG : Waiting for deletions to finish 2026/03/28 05:20:58 DEBUG : large: Excluded (Size Filter) 2026/03/28 05:20:58 INFO : small: Deleted 2026/03/28 05:20:58 INFO : medium: Deleted --- PASS: TestDelete (2.90s) === RUN TestMaxDelete run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" 2026/03/28 05:21:01 DEBUG : Waiting for deletions to finish 2026/03/28 05:21:01 ERROR : small: Got fatal error on delete: --max-delete threshold reached 2026/03/28 05:21:01 INFO : medium: Deleted 2026/03/28 05:21:01 INFO : large: Deleted --- PASS: TestMaxDelete (3.06s) === RUN TestMaxDeleteSizeLargeFile run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" 2026/03/28 05:21:04 DEBUG : Waiting for deletions to finish 2026/03/28 05:21:04 ERROR : large: Got fatal error on delete: --max-delete-size threshold reached 2026/03/28 05:21:04 INFO : medium: Deleted 2026/03/28 05:21:04 INFO : small: Deleted --- PASS: TestMaxDeleteSizeLargeFile (3.18s) === RUN TestMaxDeleteSize run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" 2026/03/28 05:21:07 DEBUG : Waiting for deletions to finish 2026/03/28 05:21:07 ERROR : small: Got fatal error on delete: --max-delete-size threshold reached 2026/03/28 05:21:07 INFO : large: Deleted 2026/03/28 05:21:07 INFO : medium: Deleted --- PASS: TestMaxDeleteSize (3.01s) === RUN TestReadFile run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" --- PASS: TestReadFile (1.73s) === RUN TestRetry 2026/03/28 05:21:10 DEBUG : Received error: Wrapped EOF is retriable: EOF - low level retry 1/5 2026/03/28 05:21:10 DEBUG : Received error: Wrapped EOF is retriable: EOF - low level retry 2/5 2026/03/28 05:21:10 DEBUG : Sleeping for 10ms (as indicated by the server) to obey Retry-After error: BANG: trying again in 10ms 2026/03/28 05:21:10 DEBUG : Sleeping for 10ms (as indicated by the server) to obey Retry-After error: BANG: trying again in 10ms 2026/03/28 05:21:10 DEBUG : Sleeping for 10ms (as indicated by the server) to obey Retry-After error: BANG: trying again in 10ms 2026/03/28 05:21:10 DEBUG : Sleeping for 10ms (as indicated by the server) to obey Retry-After error: BANG: trying again in 10ms 2026/03/28 05:21:10 DEBUG : Sleeping for 10ms (as indicated by the server) to obey Retry-After error: BANG: trying again in 10ms --- PASS: TestRetry (0.05s) === RUN TestCat run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" --- PASS: TestCat (4.03s) === RUN TestPurge 2026/03/28 05:21:14 DEBUG : Creating backend with remote "TestS3GCS:rclone-test-kulezir0tako" 2026/03/28 05:21:14 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2026/03/28 05:21:14 DEBUG : Creating backend with remote "/tmp/rclone2633696854" run.go:185: Remote "S3 bucket rclone-test-kulezir0tako", Local "Local file system at /tmp/rclone2633696854", Modify Window "1ns" 2026/03/28 05:21:15 INFO : S3 bucket rclone-test-kulezir0tako: Bucket "rclone-test-kulezir0tako" created with ACL "" 2026/03/28 05:21:16 INFO : A2: Making directory 2026/03/28 05:21:16 INFO : A1/B2: Making directory 2026/03/28 05:21:16 INFO : A1/B2/C2: Making directory 2026/03/28 05:21:16 INFO : A1/B1/C3: Making directory 2026/03/28 05:21:16 INFO : A3: Making directory 2026/03/28 05:21:16 INFO : A3/B3: Making directory 2026/03/28 05:21:16 INFO : A3/B3/C4: Making directory fstest.go:250: Filtering empty directory "A2" fstest.go:250: Filtering empty directory "A1/B2" fstest.go:250: Filtering empty directory "A1/B2/C2" fstest.go:250: Filtering empty directory "A1/B1/C3" fstest.go:250: Filtering empty directory "A3" fstest.go:250: Filtering empty directory "A3/B3" fstest.go:250: Filtering empty directory "A3/B3/C4" 2026/03/28 05:21:18 DEBUG : S3 bucket rclone-test-kulezir0tako: bucket is versioned: false 2026/03/28 05:21:18 DEBUG : Waiting for deletions to finish 2026/03/28 05:21:18 DEBUG : "A1/B1/C1/one" version false 2026/03/28 05:21:18 DEBUG : A1/B1/C1/one: Deleting (id "") 2026/03/28 05:21:18 INFO : A1/B1/C1/one: Deleted fstest.go:250: Filtering empty directory "A2" fstest.go:250: Filtering empty directory "A1/B2" fstest.go:250: Filtering empty directory "A1/B2/C2" fstest.go:250: Filtering empty directory "A3" fstest.go:250: Filtering empty directory "A3/B3" fstest.go:250: Filtering empty directory "A3/B3/C4" 2026/03/28 05:21:19 DEBUG : Waiting for deletions to finish 2026/03/28 05:21:19 DEBUG : "A1/two" version false 2026/03/28 05:21:19 DEBUG : A1/two: Deleting (id "") 2026/03/28 05:21:19 INFO : A1/two: Deleted 2026/03/28 05:21:20 INFO : S3 bucket rclone-test-kulezir0tako: Bucket "rclone-test-kulezir0tako" deleted 2026/03/28 05:21:20 DEBUG : S3 bucket rclone-test-kulezir0tako: Purge remote 2026/03/28 05:21:20 DEBUG : Waiting for deletions to finish 2026/03/28 05:21:20 NOTICE: purge failed: directory not found --- PASS: TestPurge (6.24s) === RUN TestRmdirsNoLeaveRoot run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" 2026/03/28 05:21:21 INFO : A2: Making directory 2026/03/28 05:21:21 INFO : A1/B2: Making directory 2026/03/28 05:21:21 INFO : A1/B2/C2: Making directory 2026/03/28 05:21:21 INFO : A1/B1/C3: Making directory 2026/03/28 05:21:21 INFO : A3: Making directory 2026/03/28 05:21:21 INFO : A3/B3: Making directory 2026/03/28 05:21:21 INFO : A3/B3/C4: Making directory fstest.go:250: Filtering empty directory "A2" fstest.go:250: Filtering empty directory "A1/B2" fstest.go:250: Filtering empty directory "A1/B2/C2" fstest.go:250: Filtering empty directory "A1/B1/C3" fstest.go:250: Filtering empty directory "A3" fstest.go:250: Filtering empty directory "A3/B3" fstest.go:250: Filtering empty directory "A3/B3/C4" 2026/03/28 05:21:22 DEBUG : removing 1 level 3 directories 2026/03/28 05:21:22 INFO : A3/B3/C4: Removing directory fstest.go:250: Filtering empty directory "A2" fstest.go:250: Filtering empty directory "A1/B2" fstest.go:250: Filtering empty directory "A1/B2/C2" fstest.go:250: Filtering empty directory "A1/B1/C3" fstest.go:250: Filtering empty directory "A3" fstest.go:250: Filtering empty directory "A3/B3" 2026/03/28 05:21:24 DEBUG : removing 1 level 0 directories 2026/03/28 05:21:24 INFO : S3 bucket rclone-test-wiqolej7luxi: Removing directory 2026/03/28 05:21:24 INFO : S3 bucket rclone-test-wiqolej7luxi: Bucket "rclone-test-wiqolej7luxi" deleted --- PASS: TestRmdirsNoLeaveRoot (4.36s) === RUN TestRmdirsLeaveRoot run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" 2026/03/28 05:21:26 INFO : S3 bucket rclone-test-wiqolej7luxi: Bucket "rclone-test-wiqolej7luxi" created with ACL "" 2026/03/28 05:21:26 INFO : A1: Making directory 2026/03/28 05:21:26 INFO : A1/B1: Making directory 2026/03/28 05:21:26 INFO : A1/B1/C1: Making directory fstest.go:250: Filtering empty directory "A1" fstest.go:250: Filtering empty directory "A1/B1" fstest.go:250: Filtering empty directory "A1/B1/C1" fstest.go:250: Filtering empty directory "A1" --- PASS: TestRmdirsLeaveRoot (2.11s) === RUN TestRmdirsWithFilter run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" 2026/03/28 05:21:27 INFO : A1: Making directory 2026/03/28 05:21:27 INFO : A1/B1: Making directory 2026/03/28 05:21:27 INFO : A1/B1/C1: Making directory fstest.go:250: Filtering empty directory "A1" fstest.go:250: Filtering empty directory "A1/B1" fstest.go:250: Filtering empty directory "A1/B1/C1" fstest.go:250: Filtering empty directory "A1" --- PASS: TestRmdirsWithFilter (1.20s) === RUN TestCopyURL run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" 2026/03/28 05:21:28 ERROR : file1: Post request put error: operation error S3: PutObject, serialization failed: internal error: Seek not implemented for io.nopCloser operations_test.go:843: Error Trace: /home/rclone/go/src/github.com/rclone/rclone/fs/operations/operations_test.go:843 Error: Received unexpected error: operation error S3: PutObject, serialization failed: internal error: Seek not implemented for io.nopCloser Test: TestCopyURL --- FAIL: TestCopyURL (0.70s) === RUN TestCopyURLDownloadHeaders run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" 2026/03/28 05:21:29 ERROR : file1: Post request put error: operation error S3: PutObject, serialization failed: internal error: Seek not implemented for io.nopCloser operations_test.go:915: Error Trace: /home/rclone/go/src/github.com/rclone/rclone/fs/operations/operations_test.go:915 Error: Received unexpected error: operation error S3: PutObject, serialization failed: internal error: Seek not implemented for io.nopCloser Test: TestCopyURLDownloadHeaders --- FAIL: TestCopyURLDownloadHeaders (0.50s) === RUN TestCopyURLToWriter --- PASS: TestCopyURLToWriter (0.00s) === RUN TestMoveFile run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" 2026/03/28 05:21:29 DEBUG : file1: Need to transfer - File not found at Destination 2026/03/28 05:21:30 DEBUG : sub/file2: size = 14 OK 2026/03/28 05:21:30 DEBUG : file1: md5 = 0ef726ce9b1a7692357ff70dd321d595 OK 2026/03/28 05:21:30 INFO : file1: Copied (new) to: sub/file2 2026/03/28 05:21:30 INFO : file1: Deleted 2026/03/28 05:21:30 DEBUG : sub/file2: size = 14 OK 2026/03/28 05:21:30 DEBUG : file1: Size and modification time the same (differ by 0s, within tolerance 1ns) 2026/03/28 05:21:30 DEBUG : file1: Unchanged skipping 2026/03/28 05:21:30 INFO : file1: Deleted 2026/03/28 05:21:31 DEBUG : S3 bucket rclone-test-wiqolej7luxi: don't need to copy/move sub/file2, it is already at target location --- PASS: TestMoveFile (3.10s) === RUN TestMoveFileWithIgnoreExisting run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" 2026/03/28 05:21:32 DEBUG : file1: Need to transfer - File not found at Destination 2026/03/28 05:21:33 DEBUG : file1: size = 14 OK 2026/03/28 05:21:33 DEBUG : file1: md5 = 0ef726ce9b1a7692357ff70dd321d595 OK 2026/03/28 05:21:33 INFO : file1: Copied (new) 2026/03/28 05:21:33 INFO : file1: Deleted 2026/03/28 05:21:34 DEBUG : file1: Destination exists, skipping 2026/03/28 05:21:34 DEBUG : file1: Not removing source file as destination file exists and --ignore-existing is set --- PASS: TestMoveFileWithIgnoreExisting (2.71s) === RUN TestCaseInsensitiveMoveFile run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" --- PASS: TestCaseInsensitiveMoveFile (0.50s) === RUN TestCaseInsensitiveMoveFileDryRun run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" --- PASS: TestCaseInsensitiveMoveFileDryRun (0.40s) === RUN TestMoveFileBackupDir run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" 2026/03/28 05:21:37 DEBUG : Creating backend with remote "TestS3GCS:rclone-test-wiqolej7luxi/backup" 2026/03/28 05:21:37 DEBUG : dst/file1: size = 14 (Local file system at /tmp/rclone1365695657) 2026/03/28 05:21:37 DEBUG : dst/file1: size = 18 (S3 bucket rclone-test-wiqolej7luxi) 2026/03/28 05:21:37 DEBUG : dst/file1: Sizes differ 2026/03/28 05:21:39 DEBUG : dst/file1: size = 18 OK 2026/03/28 05:21:39 DEBUG : dst/file1: md5 = 05164b153084ba910184c26e561a7c18 OK 2026/03/28 05:21:39 INFO : dst/file1: Copied (server-side copy) 2026/03/28 05:21:39 INFO : dst/file1: Deleted 2026/03/28 05:21:40 DEBUG : dst/file1: size = 14 OK 2026/03/28 05:21:40 DEBUG : dst/file1: md5 = 0ef726ce9b1a7692357ff70dd321d595 OK 2026/03/28 05:21:40 INFO : dst/file1: Copied (new) 2026/03/28 05:21:40 INFO : dst/file1: Deleted --- PASS: TestMoveFileBackupDir (6.10s) === RUN TestSameConfig --- PASS: TestSameConfig (0.00s) === RUN TestSame --- PASS: TestSame (0.00s) === RUN TestOverlappingFilterCheckWithoutFilter --- PASS: TestOverlappingFilterCheckWithoutFilter (0.00s) === RUN TestOverlappingFilterCheckWithFilter --- PASS: TestOverlappingFilterCheckWithFilter (0.00s) === RUN TestListFormat --- PASS: TestListFormat (0.00s) === RUN TestDirMove run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" 2026/03/28 05:21:45 INFO : A1/B2: Making directory 2026/03/28 05:21:45 INFO : A1/B1/C3: Making directory fstest.go:250: Filtering empty directory "A1/B2" fstest.go:250: Filtering empty directory "A1/B1/C3" 2026/03/28 05:21:47 DEBUG : A2/B1/three: size = 5 OK 2026/03/28 05:21:47 DEBUG : A1/B1/three: md5 = 35d6d33467aae9a2e3dccb4b6b027878 OK 2026/03/28 05:21:47 INFO : A1/B1/three: Copied (server-side copy) to: A2/B1/three 2026/03/28 05:21:47 DEBUG : A2/one: size = 3 OK 2026/03/28 05:21:47 DEBUG : A1/one: md5 = f97c5d29941bfb1b2fdab0874906ab82 OK 2026/03/28 05:21:47 INFO : A1/one: Copied (server-side copy) to: A2/one 2026/03/28 05:21:47 DEBUG : A2/B1/C2/five: size = 4 OK 2026/03/28 05:21:47 DEBUG : A1/B1/C2/five: md5 = 30056e1cab7a61d256fc8edd970d14f5 OK 2026/03/28 05:21:47 INFO : A1/B1/C2/five: Copied (server-side copy) to: A2/B1/C2/five 2026/03/28 05:21:47 DEBUG : A2/B1/C1/four: size = 4 OK 2026/03/28 05:21:47 DEBUG : A1/B1/C1/four: md5 = 8cbad96aced40b3838dd9f07f6ef5772 OK 2026/03/28 05:21:47 INFO : A1/B1/C1/four: Copied (server-side copy) to: A2/B1/C1/four 2026/03/28 05:21:47 DEBUG : A2/two: size = 3 OK 2026/03/28 05:21:47 DEBUG : A1/two: md5 = b8a9f715dbb64fd5c56e7783c6820a61 OK 2026/03/28 05:21:47 INFO : A1/two: Copied (server-side copy) to: A2/two 2026/03/28 05:21:47 INFO : A1/B1/three: Deleted 2026/03/28 05:21:47 INFO : A1/one: Deleted 2026/03/28 05:21:47 INFO : A1/B1/C1/four: Deleted 2026/03/28 05:21:47 INFO : A1/two: Deleted 2026/03/28 05:21:47 INFO : A1/B1/C2/five: Deleted fstest.go:250: Filtering empty directory "A2/B2" fstest.go:250: Filtering empty directory "A2/B1/C3" 2026/03/28 05:21:50 DEBUG : A3/B1/three: size = 5 OK 2026/03/28 05:21:50 DEBUG : A2/B1/three: md5 = 35d6d33467aae9a2e3dccb4b6b027878 OK 2026/03/28 05:21:50 INFO : A2/B1/three: Copied (server-side copy) to: A3/B1/three 2026/03/28 05:21:50 DEBUG : A3/one: size = 3 OK 2026/03/28 05:21:50 DEBUG : A2/one: md5 = f97c5d29941bfb1b2fdab0874906ab82 OK 2026/03/28 05:21:50 INFO : A2/one: Copied (server-side copy) to: A3/one 2026/03/28 05:21:50 DEBUG : A3/two: size = 3 OK 2026/03/28 05:21:50 DEBUG : A2/two: md5 = b8a9f715dbb64fd5c56e7783c6820a61 OK 2026/03/28 05:21:50 INFO : A2/two: Copied (server-side copy) to: A3/two 2026/03/28 05:21:50 DEBUG : A3/B1/C2/five: size = 4 OK 2026/03/28 05:21:50 DEBUG : A2/B1/C2/five: md5 = 30056e1cab7a61d256fc8edd970d14f5 OK 2026/03/28 05:21:50 INFO : A2/B1/C2/five: Copied (server-side copy) to: A3/B1/C2/five 2026/03/28 05:21:50 DEBUG : A3/B1/C1/four: size = 4 OK 2026/03/28 05:21:50 DEBUG : A2/B1/C1/four: md5 = 8cbad96aced40b3838dd9f07f6ef5772 OK 2026/03/28 05:21:50 INFO : A2/B1/C1/four: Copied (server-side copy) to: A3/B1/C1/four 2026/03/28 05:21:50 INFO : A2/one: Deleted 2026/03/28 05:21:50 INFO : A2/B1/C2/five: Deleted 2026/03/28 05:21:50 INFO : A2/B1/three: Deleted 2026/03/28 05:21:50 INFO : A2/two: Deleted 2026/03/28 05:21:50 INFO : A2/B1/C1/four: Deleted fstest.go:250: Filtering empty directory "A3/B2" fstest.go:250: Filtering empty directory "A3/B1/C3" 2026/03/28 05:21:51 INFO : S3 bucket rclone-test-wiqolej7luxi: Can't DirMove - falling back to file moves: can't move directory - incompatible remotes 2026/03/28 05:21:52 DEBUG : A4/B1/C1/four: size = 4 OK 2026/03/28 05:21:52 DEBUG : A3/B1/C1/four: md5 = 8cbad96aced40b3838dd9f07f6ef5772 OK 2026/03/28 05:21:52 INFO : A3/B1/C1/four: Copied (server-side copy) to: A4/B1/C1/four 2026/03/28 05:21:52 DEBUG : A4/one: size = 3 OK 2026/03/28 05:21:52 DEBUG : A3/one: md5 = f97c5d29941bfb1b2fdab0874906ab82 OK 2026/03/28 05:21:52 INFO : A3/one: Copied (server-side copy) to: A4/one 2026/03/28 05:21:52 DEBUG : A4/B1/three: size = 5 OK 2026/03/28 05:21:52 DEBUG : A3/B1/three: md5 = 35d6d33467aae9a2e3dccb4b6b027878 OK 2026/03/28 05:21:52 INFO : A3/B1/three: Copied (server-side copy) to: A4/B1/three 2026/03/28 05:21:52 DEBUG : A4/two: size = 3 OK 2026/03/28 05:21:52 DEBUG : A3/two: md5 = b8a9f715dbb64fd5c56e7783c6820a61 OK 2026/03/28 05:21:52 INFO : A3/two: Copied (server-side copy) to: A4/two 2026/03/28 05:21:52 DEBUG : A4/B1/C2/five: size = 4 OK 2026/03/28 05:21:52 DEBUG : A3/B1/C2/five: md5 = 30056e1cab7a61d256fc8edd970d14f5 OK 2026/03/28 05:21:52 INFO : A3/B1/C2/five: Copied (server-side copy) to: A4/B1/C2/five 2026/03/28 05:21:52 INFO : A3/B1/C1/four: Deleted 2026/03/28 05:21:53 INFO : A3/one: Deleted 2026/03/28 05:21:53 INFO : A3/two: Deleted 2026/03/28 05:21:53 INFO : A3/B1/three: Deleted 2026/03/28 05:21:53 INFO : A3/B1/C2/five: Deleted fstest.go:250: Filtering empty directory "A4/B2" fstest.go:250: Filtering empty directory "A4/B1/C3" --- PASS: TestDirMove (14.20s) === RUN TestGetFsInfo run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" --- PASS: TestGetFsInfo (0.40s) === RUN TestRcat === RUN TestRcat/withChecksum=false,ignoreChecksum=false run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" 2026/03/28 05:21:57 DEBUG : S3 bucket rclone-test-wiqolej7luxi: File to upload is small (34 bytes), uploading instead of streaming 2026/03/28 05:21:57 DEBUG : no_checksum_small_file_from_pipe: size = 34 OK 2026/03/28 05:21:57 DEBUG : no_checksum_small_file_from_pipe: md5 = 4c762bc6ec18f21b23fcae426c7863b5 OK 2026/03/28 05:21:57 DEBUG : no_checksum_small_file_from_pipe: Size and md5 of src and dst objects identical 2026/03/28 05:21:57 NOTICE: S3 bucket rclone-test-wiqolej7luxi: Streaming uploads using chunk size 5Mi will have maximum file size of 48.828Gi 2026/03/28 05:21:58 DEBUG : no_checksum_big_file_from_pipe: open chunk writer: started multipart upload: ABPnzm7uYnIqoXsyq6-KZvKymTeli4uBRICcXvArrM_FAZSEmuAM0OSXzw0jCZr3Ex_O9uo 2026/03/28 05:21:58 DEBUG : no_checksum_big_file_from_pipe: multipart upload: starting chunk 0 size 100.001Ki offset 0/off 2026/03/28 05:21:58 DEBUG : no_checksum_big_file_from_pipe: multipart upload wrote chunk 1 with 102401 bytes and etag "fffc7956ba9a7b58a63c01b6ce1ddc45" 2026/03/28 05:21:59 DEBUG : no_checksum_big_file_from_pipe: multipart upload "ABPnzm7uYnIqoXsyq6-KZvKymTeli4uBRICcXvArrM_FAZSEmuAM0OSXzw0jCZr3Ex_O9uo" finished 2026/03/28 05:21:59 DEBUG : no_checksum_big_file_from_pipe: Multipart upload Etag: bbeee02c608c6e85736b35e536fba719-1 OK 2026/03/28 05:21:59 DEBUG : no_checksum_big_file_from_pipe: size = 102401 OK 2026/03/28 05:21:59 DEBUG : no_checksum_big_file_from_pipe: Dst hash empty - aborting Src hash check 2026/03/28 05:21:59 DEBUG : no_checksum_big_file_from_pipe: Size of src and dst objects identical === RUN TestRcat/withChecksum=true,ignoreChecksum=false run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" 2026/03/28 05:22:01 DEBUG : S3 bucket rclone-test-wiqolej7luxi: File to upload is small (34 bytes), uploading instead of streaming 2026/03/28 05:22:01 DEBUG : with_checksum_small_file_from_pipe: size = 34 OK 2026/03/28 05:22:01 DEBUG : with_checksum_small_file_from_pipe: md5 = 4c762bc6ec18f21b23fcae426c7863b5 OK 2026/03/28 05:22:01 DEBUG : with_checksum_small_file_from_pipe: Size and md5 of src and dst objects identical 2026/03/28 05:22:02 DEBUG : with_checksum_big_file_from_pipe: open chunk writer: started multipart upload: ABPnzm4DJPoO_X0roxHRCZW_OAr27fqER6yKSkbqsbHMuuNajo9siqyBkCsjuGQjtsqybBA 2026/03/28 05:22:02 DEBUG : with_checksum_big_file_from_pipe: multipart upload: starting chunk 0 size 100.001Ki offset 0/off 2026/03/28 05:22:02 DEBUG : with_checksum_big_file_from_pipe: multipart upload wrote chunk 1 with 102401 bytes and etag "fffc7956ba9a7b58a63c01b6ce1ddc45" 2026/03/28 05:22:03 DEBUG : with_checksum_big_file_from_pipe: multipart upload "ABPnzm4DJPoO_X0roxHRCZW_OAr27fqER6yKSkbqsbHMuuNajo9siqyBkCsjuGQjtsqybBA" finished 2026/03/28 05:22:03 DEBUG : with_checksum_big_file_from_pipe: Multipart upload Etag: bbeee02c608c6e85736b35e536fba719-1 OK 2026/03/28 05:22:03 DEBUG : with_checksum_big_file_from_pipe: size = 102401 OK 2026/03/28 05:22:03 DEBUG : with_checksum_big_file_from_pipe: Dst hash empty - aborting Src hash check 2026/03/28 05:22:03 DEBUG : with_checksum_big_file_from_pipe: Size of src and dst objects identical === RUN TestRcat/withChecksum=false,ignoreChecksum=true run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" 2026/03/28 05:22:05 DEBUG : S3 bucket rclone-test-wiqolej7luxi: File to upload is small (34 bytes), uploading instead of streaming 2026/03/28 05:22:05 DEBUG : ignore_checksum_small_file_from_pipe: size = 34 OK 2026/03/28 05:22:05 DEBUG : ignore_checksum_small_file_from_pipe: Size and modification time the same (differ by 0s, within tolerance 1ns) 2026/03/28 05:22:05 DEBUG : ignore_checksum_big_file_from_pipe: open chunk writer: started multipart upload: ABPnzm4KqXWx5AWfNgGYQbnqIx4Rl2fn7w6Lcv1W9hobTLOHjOri1CBM8JwCM6oKrGIxz04 2026/03/28 05:22:05 DEBUG : ignore_checksum_big_file_from_pipe: multipart upload: starting chunk 0 size 100.001Ki offset 0/off 2026/03/28 05:22:06 DEBUG : ignore_checksum_big_file_from_pipe: multipart upload wrote chunk 1 with 102401 bytes and etag "fffc7956ba9a7b58a63c01b6ce1ddc45" 2026/03/28 05:22:07 DEBUG : ignore_checksum_big_file_from_pipe: multipart upload "ABPnzm4KqXWx5AWfNgGYQbnqIx4Rl2fn7w6Lcv1W9hobTLOHjOri1CBM8JwCM6oKrGIxz04" finished 2026/03/28 05:22:07 DEBUG : ignore_checksum_big_file_from_pipe: Multipart upload Etag: bbeee02c608c6e85736b35e536fba719-1 OK 2026/03/28 05:22:07 DEBUG : ignore_checksum_big_file_from_pipe: size = 102401 OK 2026/03/28 05:22:07 DEBUG : ignore_checksum_big_file_from_pipe: Size and modification time the same (differ by 0s, within tolerance 1ns) === RUN TestRcat/withChecksum=true,ignoreChecksum=true run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" 2026/03/28 05:22:09 DEBUG : S3 bucket rclone-test-wiqolej7luxi: File to upload is small (34 bytes), uploading instead of streaming 2026/03/28 05:22:09 DEBUG : ignore_checksum_small_file_from_pipe: size = 34 OK 2026/03/28 05:22:09 DEBUG : ignore_checksum_small_file_from_pipe: Src hash empty - aborting Dst hash check 2026/03/28 05:22:09 DEBUG : ignore_checksum_small_file_from_pipe: Size of src and dst objects identical 2026/03/28 05:22:10 DEBUG : ignore_checksum_big_file_from_pipe: open chunk writer: started multipart upload: ABPnzm5Hc0c3ehFLB1549kFomYMixoWxiNLNTdJrBG0qB-CXSikv7_MhVtzjs44L4rampOg 2026/03/28 05:22:10 DEBUG : ignore_checksum_big_file_from_pipe: multipart upload: starting chunk 0 size 100.001Ki offset 0/off 2026/03/28 05:22:10 DEBUG : ignore_checksum_big_file_from_pipe: multipart upload wrote chunk 1 with 102401 bytes and etag "fffc7956ba9a7b58a63c01b6ce1ddc45" 2026/03/28 05:22:11 DEBUG : ignore_checksum_big_file_from_pipe: multipart upload "ABPnzm5Hc0c3ehFLB1549kFomYMixoWxiNLNTdJrBG0qB-CXSikv7_MhVtzjs44L4rampOg" finished 2026/03/28 05:22:11 DEBUG : ignore_checksum_big_file_from_pipe: Multipart upload Etag: bbeee02c608c6e85736b35e536fba719-1 OK 2026/03/28 05:22:11 DEBUG : ignore_checksum_big_file_from_pipe: size = 102401 OK 2026/03/28 05:22:11 DEBUG : ignore_checksum_big_file_from_pipe: Dst hash empty - aborting Src hash check 2026/03/28 05:22:11 DEBUG : ignore_checksum_big_file_from_pipe: Src hash empty - aborting Dst hash check 2026/03/28 05:22:11 DEBUG : ignore_checksum_big_file_from_pipe: Size of src and dst objects identical --- PASS: TestRcat (16.30s) --- PASS: TestRcat/withChecksum=false,ignoreChecksum=false (4.00s) --- PASS: TestRcat/withChecksum=true,ignoreChecksum=false (3.90s) --- PASS: TestRcat/withChecksum=false,ignoreChecksum=true (4.09s) --- PASS: TestRcat/withChecksum=true,ignoreChecksum=true (4.30s) === RUN TestRcatMetadata run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" === RUN TestRcatMetadata/Normal 2026/03/28 05:22:13 DEBUG : S3 bucket rclone-test-wiqolej7luxi: File to upload is small (48 bytes), uploading instead of streaming 2026/03/28 05:22:14 DEBUG : rcat_metadata: size = 48 OK 2026/03/28 05:22:14 DEBUG : rcat_metadata: md5 = dee10c33b9fe5e2ac4eb8ad8467b7063 OK 2026/03/28 05:22:14 DEBUG : rcat_metadata: Size and md5 of src and dst objects identical === RUN TestRcatMetadata/ViaDisk 2026/03/28 05:22:15 DEBUG : rcat_metadata_uploadcutoff0: open chunk writer: started multipart upload: ABPnzm72pPKPpR6eVHlDMD84OUmbS9ZlDi3uhO-MSP3PqlOlrOHEDMl2eVCl8w96_9IYTBk 2026/03/28 05:22:15 DEBUG : rcat_metadata_uploadcutoff0: multipart upload: starting chunk 0 size 63 offset 0/off 2026/03/28 05:22:15 DEBUG : rcat_metadata_uploadcutoff0: multipart upload wrote chunk 1 with 63 bytes and etag "51ca8560f35b9b87370a65d72356b86c" 2026/03/28 05:22:16 DEBUG : rcat_metadata_uploadcutoff0: multipart upload "ABPnzm72pPKPpR6eVHlDMD84OUmbS9ZlDi3uhO-MSP3PqlOlrOHEDMl2eVCl8w96_9IYTBk" finished 2026/03/28 05:22:16 DEBUG : rcat_metadata_uploadcutoff0: Multipart upload Etag: ed80e8f4a79a14666b4280dc1353888f-1 OK 2026/03/28 05:22:16 DEBUG : rcat_metadata_uploadcutoff0: size = 63 OK 2026/03/28 05:22:16 DEBUG : rcat_metadata_uploadcutoff0: Dst hash empty - aborting Src hash check 2026/03/28 05:22:16 DEBUG : rcat_metadata_uploadcutoff0: Size of src and dst objects identical --- PASS: TestRcatMetadata (4.40s) --- PASS: TestRcatMetadata/Normal (1.53s) --- PASS: TestRcatMetadata/ViaDisk (2.41s) === RUN TestRcatSize run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" 2026/03/28 05:22:17 ERROR : potato1: Post request put error: operation error S3: PutObject, serialization failed: internal error: Seek not implemented for io.nopCloserWriterTo operations_test.go:1624: Error Trace: /home/rclone/go/src/github.com/rclone/rclone/fs/operations/operations_test.go:1624 Error: Received unexpected error: operation error S3: PutObject, serialization failed: internal error: Seek not implemented for io.nopCloserWriterTo Test: TestRcatSize --- FAIL: TestRcatSize (0.40s) === RUN TestRcatSizeMetadata run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" 2026/03/28 05:22:18 ERROR : potato1: Post request put error: operation error S3: PutObject, serialization failed: internal error: Seek not implemented for io.nopCloserWriterTo operations_test.go:1663: Error Trace: /home/rclone/go/src/github.com/rclone/rclone/fs/operations/operations_test.go:1663 Error: Received unexpected error: operation error S3: PutObject, serialization failed: internal error: Seek not implemented for io.nopCloserWriterTo Test: TestRcatSizeMetadata --- FAIL: TestRcatSizeMetadata (0.40s) === RUN TestRcatSizeUploadHeaders run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" 2026/03/28 05:22:18 ERROR : potato1: Don't know how to set key "X-Upload-Header" on upload 2026/03/28 05:22:18 ERROR : potato1: Post request put error: operation error S3: PutObject, serialization failed: internal error: Seek not implemented for io.nopCloserWriterTo operations_test.go:1714: Error Trace: /home/rclone/go/src/github.com/rclone/rclone/fs/operations/operations_test.go:1714 Error: Received unexpected error: operation error S3: PutObject, serialization failed: internal error: Seek not implemented for io.nopCloserWriterTo Test: TestRcatSizeUploadHeaders --- FAIL: TestRcatSizeUploadHeaders (0.40s) === RUN TestTouchDir run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" 2026/03/28 05:22:21 DEBUG : S3 bucket rclone-test-wiqolej7luxi: Touching "sub dir/potato3" 2026/03/28 05:22:21 DEBUG : S3 bucket rclone-test-wiqolej7luxi: Touching "potato2" 2026/03/28 05:22:21 DEBUG : S3 bucket rclone-test-wiqolej7luxi: Touching "empty space" --- PASS: TestTouchDir (5.40s) === RUN TestMkdirMetadata run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" operations_test.go:1773: Skipping test as remote does not support MkdirMetadata --- SKIP: TestMkdirMetadata (0.33s) === RUN TestMkdirModTime run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" operations_test.go:1792: Skipping test as remote does not support DirSetModTime or MkdirMetadata --- SKIP: TestMkdirModTime (0.46s) === RUN TestCopyDirMetadata run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" operations_test.go:1813: Skipping test as remote does not support WriteDirMetadata or MkdirMetadata --- SKIP: TestCopyDirMetadata (0.41s) === RUN TestSetDirModTime run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" operations_test.go:1849: Skipping test as remote does not support DirSetModTime or WriteDirSetModTime --- SKIP: TestSetDirModTime (0.40s) === RUN TestDirsEqual run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" operations_test.go:1893: Skipping test as remote does not support WriteDirMetadata or MkdirMetadata --- SKIP: TestDirsEqual (0.40s) === RUN TestRemoveExisting run.go:185: Remote "S3 bucket rclone-test-wiqolej7luxi", Local "Local file system at /tmp/rclone1365695657", Modify Window "1ns" operations_test.go:1962: Skipping as remote can't Move --- SKIP: TestRemoveExisting (0.40s) === RUN TestRcAbout rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcAbout (0.00s) === RUN TestRcCleanup rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcCleanup (0.00s) === RUN TestRcCopyfile rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcCopyfile (0.00s) === RUN TestRcCopyurl rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcCopyurl (0.00s) === RUN TestRcDelete rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcDelete (0.00s) === RUN TestRcDeletefile rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcDeletefile (0.00s) === RUN TestRcList rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcList (0.00s) === RUN TestRcStat rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcStat (0.00s) === RUN TestRcSetTier rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcSetTier (0.00s) === RUN TestRcSetTierFile rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcSetTierFile (0.00s) === RUN TestRcMkdir rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcMkdir (0.00s) === RUN TestRcMovefile rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcMovefile (0.00s) === RUN TestRcPurge rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcPurge (0.00s) === RUN TestRcRmdir rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcRmdir (0.00s) === RUN TestRcRmdirs rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcRmdirs (0.00s) === RUN TestRcSize rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcSize (0.00s) === RUN TestRcPublicLink rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcPublicLink (0.00s) === RUN TestRcFsInfo rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcFsInfo (0.00s) === RUN TestUploadFile rc_test.go:30: Skipping test on non local remote --- SKIP: TestUploadFile (0.00s) === RUN TestRcCommand rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcCommand (0.00s) === RUN TestRcDu rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcDu (0.00s) === RUN TestRcCheck rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcCheck (0.00s) === RUN TestRcHashsum rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcHashsum (0.00s) === RUN TestRcHashsumSingleFile rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcHashsumSingleFile (0.00s) === RUN TestRcHashsumFile rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcHashsumFile (0.00s) FAIL 2026/03/28 05:22:26 DEBUG : S3 bucket rclone-test-wiqolej7luxi: Purge remote 2026/03/28 05:22:26 DEBUG : S3 bucket rclone-test-wiqolej7luxi: bucket is versioned: false 2026/03/28 05:22:26 DEBUG : Waiting for deletions to finish 2026/03/28 05:22:27 INFO : S3 bucket rclone-test-wiqolej7luxi: Bucket "rclone-test-wiqolej7luxi" deleted "./operations.test -test.v -test.timeout 1h0m0s -remote TestS3GCS: -verbose" - Finished ERROR in 5m48.212079168s (try 1/5): exit status 1: Failed [TestCopyURL TestCopyURLDownloadHeaders TestRcatSize TestRcatSizeMetadata TestRcatSizeUploadHeaders]