"./operations.test -test.v -test.timeout 1h0m0s -remote TestS3R2: -verbose -fast-list" - Starting (try 1/5) 2026/03/19 01:08:53 DEBUG : Creating backend with remote "TestS3R2:rclone-test-pivisat0jeto" 2026/03/19 01:08:53 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2026/03/19 01:08:53 DEBUG : Creating backend with remote "/tmp/rclone1014847034" === RUN TestDoMultiThreadCopy --- PASS: TestDoMultiThreadCopy (0.00s) === RUN TestMultithreadCalculateNumChunks === RUN TestMultithreadCalculateNumChunks/{size:1_chunkSize:65536_wantNumChunks:1} === RUN TestMultithreadCalculateNumChunks/{size:1048576_chunkSize:1_wantNumChunks:1048576} === RUN TestMultithreadCalculateNumChunks/{size:1048576_chunkSize:2_wantNumChunks:524288} === RUN TestMultithreadCalculateNumChunks/{size:1048577_chunkSize:2_wantNumChunks:524289} === RUN TestMultithreadCalculateNumChunks/{size:1048575_chunkSize:2_wantNumChunks:524288} --- PASS: TestMultithreadCalculateNumChunks (0.00s) --- PASS: TestMultithreadCalculateNumChunks/{size:1_chunkSize:65536_wantNumChunks:1} (0.00s) --- PASS: TestMultithreadCalculateNumChunks/{size:1048576_chunkSize:1_wantNumChunks:1048576} (0.00s) --- PASS: TestMultithreadCalculateNumChunks/{size:1048576_chunkSize:2_wantNumChunks:524288} (0.00s) --- PASS: TestMultithreadCalculateNumChunks/{size:1048577_chunkSize:2_wantNumChunks:524289} (0.00s) --- PASS: TestMultithreadCalculateNumChunks/{size:1048575_chunkSize:2_wantNumChunks:524288} (0.00s) === RUN TestMultithreadCopy run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" 2026/03/19 01:08:54 INFO : S3 bucket rclone-test-pivisat0jeto: Bucket "rclone-test-pivisat0jeto" created with ACL "" 2026/03/19 01:08:54 DEBUG : chunksize-probe: open chunk writer: started multipart upload: ACeJFcomG6yjWfhh5anPF_EN3rJ1lo-z3Wwn3Q7f0XglG_NVqt370vMbiyeAr0FdlIDdyRkPCgn23al5B6KyPBZzWFutGKCns4pB_vMAYzxyEy-GfoneDwUfrKPSiU_75i0a5mQ2YKKSPxBPqPnXDwY34XSUWduHA1DuBIeXF7_uy9QQdomqgn8W5T1bGmgKWVbW6wngBGfG9Y7sH4gIJRlGpyRCflESBTWvpRQ3yLKryHQKtg9Kpqi8WQyUDWq06MxD1jK4Fh5HDdELnL8P8tzWNrGThX6cdVLAJ9JXO2JKtHNthpO3uaXTEy8N6y7RBN5OdzATH4RHsFSPHJLcWgI 2026/03/19 01:08:54 DEBUG : chunksize-probe: multipart upload "ACeJFcomG6yjWfhh5anPF_EN3rJ1lo-z3Wwn3Q7f0XglG_NVqt370vMbiyeAr0FdlIDdyRkPCgn23al5B6KyPBZzWFutGKCns4pB_vMAYzxyEy-GfoneDwUfrKPSiU_75i0a5mQ2YKKSPxBPqPnXDwY34XSUWduHA1DuBIeXF7_uy9QQdomqgn8W5T1bGmgKWVbW6wngBGfG9Y7sH4gIJRlGpyRCflESBTWvpRQ3yLKryHQKtg9Kpqi8WQyUDWq06MxD1jK4Fh5HDdELnL8P8tzWNrGThX6cdVLAJ9JXO2JKtHNthpO3uaXTEy8N6y7RBN5OdzATH4RHsFSPHJLcWgI" aborted === RUN TestMultithreadCopy/upload=false,size=10485759,streams=2 2026/03/19 01:08:55 DEBUG : test-multithread-copy-false-10485759-2: multi-thread copy: disabling buffering because destination uses OpenWriterAt 2026/03/19 01:08:55 DEBUG : test-multithread-copy-false-10485759-2: multi-thread copy: write buffer set to 131072 2026/03/19 01:08:55 DEBUG : test-multithread-copy-false-10485759-2: multi-thread copy: chunk size 64Mi was bigger than source file size 10.000Mi 2026/03/19 01:08:55 DEBUG : test-multithread-copy-false-10485759-2: multi-thread copy: using backend concurrency of 4 instead of --multi-thread-streams 2 2026/03/19 01:08:55 DEBUG : test-multithread-copy-false-10485759-2: multi-thread copy: number of streams 4 was bigger than number of chunks 1 2026/03/19 01:08:55 DEBUG : test-multithread-copy-false-10485759-2: Starting multi-thread copy with 1 chunks of size 10.000Mi with 1 parallel streams 2026/03/19 01:08:55 DEBUG : test-multithread-copy-false-10485759-2: multi-thread copy: chunk 1/1 (0-10485759) size 10.000Mi starting 2026/03/19 01:08:55 DEBUG : test-multithread-copy-false-10485759-2: writing chunk 0 2026/03/19 01:08:55 DEBUG : test-multithread-copy-false-10485759-2: multi-thread copy: chunk 1/1 (0-10485759) size 10.000Mi finished 2026/03/19 01:08:55 DEBUG : test-multithread-copy-false-10485759-2: Finished multi-thread copy with 1 parts of size 10.000Mi === RUN TestMultithreadCopy/upload=false,size=10485760,streams=2 2026/03/19 01:08:57 DEBUG : test-multithread-copy-false-10485760-2: multi-thread copy: disabling buffering because destination uses OpenWriterAt 2026/03/19 01:08:57 DEBUG : test-multithread-copy-false-10485760-2: multi-thread copy: write buffer set to 131072 2026/03/19 01:08:57 DEBUG : test-multithread-copy-false-10485760-2: multi-thread copy: chunk size 64Mi was bigger than source file size 10Mi 2026/03/19 01:08:57 DEBUG : test-multithread-copy-false-10485760-2: multi-thread copy: using backend concurrency of 4 instead of --multi-thread-streams 2 2026/03/19 01:08:57 DEBUG : test-multithread-copy-false-10485760-2: multi-thread copy: number of streams 4 was bigger than number of chunks 1 2026/03/19 01:08:57 DEBUG : test-multithread-copy-false-10485760-2: Starting multi-thread copy with 1 chunks of size 10Mi with 1 parallel streams 2026/03/19 01:08:57 DEBUG : test-multithread-copy-false-10485760-2: multi-thread copy: chunk 1/1 (0-10485760) size 10Mi starting 2026/03/19 01:08:57 DEBUG : test-multithread-copy-false-10485760-2: writing chunk 0 2026/03/19 01:08:58 DEBUG : test-multithread-copy-false-10485760-2: multi-thread copy: chunk 1/1 (0-10485760) size 10Mi finished 2026/03/19 01:08:58 DEBUG : test-multithread-copy-false-10485760-2: Finished multi-thread copy with 1 parts of size 10Mi === RUN TestMultithreadCopy/upload=false,size=10485761,streams=2 2026/03/19 01:09:00 DEBUG : test-multithread-copy-false-10485761-2: multi-thread copy: disabling buffering because destination uses OpenWriterAt 2026/03/19 01:09:00 DEBUG : test-multithread-copy-false-10485761-2: multi-thread copy: write buffer set to 131072 2026/03/19 01:09:00 DEBUG : test-multithread-copy-false-10485761-2: multi-thread copy: chunk size 64Mi was bigger than source file size 10.000Mi 2026/03/19 01:09:00 DEBUG : test-multithread-copy-false-10485761-2: multi-thread copy: using backend concurrency of 4 instead of --multi-thread-streams 2 2026/03/19 01:09:00 DEBUG : test-multithread-copy-false-10485761-2: multi-thread copy: number of streams 4 was bigger than number of chunks 1 2026/03/19 01:09:00 DEBUG : test-multithread-copy-false-10485761-2: Starting multi-thread copy with 1 chunks of size 10.000Mi with 1 parallel streams 2026/03/19 01:09:00 DEBUG : test-multithread-copy-false-10485761-2: multi-thread copy: chunk 1/1 (0-10485761) size 10.000Mi starting 2026/03/19 01:09:00 DEBUG : test-multithread-copy-false-10485761-2: writing chunk 0 2026/03/19 01:09:00 DEBUG : test-multithread-copy-false-10485761-2: multi-thread copy: chunk 1/1 (0-10485761) size 10.000Mi finished 2026/03/19 01:09:00 DEBUG : test-multithread-copy-false-10485761-2: Finished multi-thread copy with 1 parts of size 10.000Mi === RUN TestMultithreadCopy/upload=true,size=10485759,streams=2 2026/03/19 01:09:01 DEBUG : test-multithread-copy-true-10485759-2: multi-thread copy: disabling buffering because source is local disk 2026/03/19 01:09:02 DEBUG : test-multithread-copy-true-10485759-2: open chunk writer: started multipart upload: AN7nuwKASM-ZysqSuJMhNXTqZXx-KVFZyQDDyCuH_y_5bONghWJ7jZUwAa6o-N-MJe68kFEW6O17tTmxp2gnCsyJlpNaSPbf9vQtprL5is8FdAyXEb-muZQREdeFSoyI11fF3zwPETqH8sax0Tk5Gwrhz4CDeBRexbliQ_QGYk9pHGJuOhtt2ImbwJNSGQsKUs9InQSIW_Xz0kSk3xN6Ivo2rnT0UthoY8wR3b7Hp-uVqsDYsjgj4znaNo7yuh1G_zGzgf8ErcToQSTNlaXsBuIwqP83i0rMzukrpW7dmE5_cbMFYDc2tPsFBqn3X53HEEv0xwnxAXybSWwkRKZjqKo 2026/03/19 01:09:02 DEBUG : test-multithread-copy-true-10485759-2: multi-thread copy: using backend concurrency of 4 instead of --multi-thread-streams 2 2026/03/19 01:09:02 DEBUG : test-multithread-copy-true-10485759-2: multi-thread copy: number of streams 4 was bigger than number of chunks 2 2026/03/19 01:09:02 DEBUG : test-multithread-copy-true-10485759-2: Starting multi-thread copy with 2 chunks of size 5Mi with 2 parallel streams 2026/03/19 01:09:02 DEBUG : test-multithread-copy-true-10485759-2: multi-thread copy: chunk 2/2 (5242880-10485759) size 5.000Mi starting 2026/03/19 01:09:02 DEBUG : test-multithread-copy-true-10485759-2: multi-thread copy: chunk 1/2 (0-5242880) size 5Mi starting 2026/03/19 01:09:02 DEBUG : test-multithread-copy-true-10485759-2: Seek from 5242879 to 0 2026/03/19 01:09:02 DEBUG : test-multithread-copy-true-10485759-2: Seek from 5242880 to 0 2026/03/19 01:09:02 DEBUG : test-multithread-copy-true-10485759-2: multipart upload wrote chunk 1 with 5242880 bytes and etag "bb8da7ca8e3de6d46a312a094e201c6c" 2026/03/19 01:09:02 DEBUG : test-multithread-copy-true-10485759-2: multi-thread copy: chunk 1/2 (0-5242880) size 5Mi finished 2026/03/19 01:09:02 DEBUG : test-multithread-copy-true-10485759-2: multipart upload wrote chunk 2 with 5242879 bytes and etag "5847e8927a82274e831c3b22a938f8a6" 2026/03/19 01:09:02 DEBUG : test-multithread-copy-true-10485759-2: multi-thread copy: chunk 2/2 (5242880-10485759) size 5.000Mi finished 2026/03/19 01:09:02 DEBUG : test-multithread-copy-true-10485759-2: multipart upload "AN7nuwKASM-ZysqSuJMhNXTqZXx-KVFZyQDDyCuH_y_5bONghWJ7jZUwAa6o-N-MJe68kFEW6O17tTmxp2gnCsyJlpNaSPbf9vQtprL5is8FdAyXEb-muZQREdeFSoyI11fF3zwPETqH8sax0Tk5Gwrhz4CDeBRexbliQ_QGYk9pHGJuOhtt2ImbwJNSGQsKUs9InQSIW_Xz0kSk3xN6Ivo2rnT0UthoY8wR3b7Hp-uVqsDYsjgj4znaNo7yuh1G_zGzgf8ErcToQSTNlaXsBuIwqP83i0rMzukrpW7dmE5_cbMFYDc2tPsFBqn3X53HEEv0xwnxAXybSWwkRKZjqKo" finished 2026/03/19 01:09:02 DEBUG : test-multithread-copy-true-10485759-2: Finished multi-thread copy with 2 parts of size 5Mi === RUN TestMultithreadCopy/upload=true,size=10485760,streams=2 2026/03/19 01:09:04 DEBUG : test-multithread-copy-true-10485760-2: multi-thread copy: disabling buffering because source is local disk 2026/03/19 01:09:04 DEBUG : test-multithread-copy-true-10485760-2: open chunk writer: started multipart upload: AGQtd1hxYsfVM5Ob-tsJ3tlNePinyASsLGb-yNdgbWFFRXXQlA-79o-JO3_oqF0nSgLZkho8csxDYjU60OrwgeXZwQBk1HqvMs-596jSE1pmXE4VnjZAhTWWiNkKaHVIUiy3c989N_ijIi3RbvaRle4s42DrkZrDKfTOrJi7380ZO4d5vIqPleiBFzLhF_6_j3ZSODIPhg4m9GUVTzNAgNqLeRLODJ3T1lbkG0Z9cYRGn48iRZEB4hNdTTCIC7KH87V-BmwdG_tkKjH3WUOS4zqicTYHCuPUBX1ZZ41WNjise30wabyIBFxoJQo_VwpV7HmPJSk4lNt8z7ugPvDvqDo 2026/03/19 01:09:04 DEBUG : test-multithread-copy-true-10485760-2: multi-thread copy: using backend concurrency of 4 instead of --multi-thread-streams 2 2026/03/19 01:09:04 DEBUG : test-multithread-copy-true-10485760-2: multi-thread copy: number of streams 4 was bigger than number of chunks 2 2026/03/19 01:09:04 DEBUG : test-multithread-copy-true-10485760-2: Starting multi-thread copy with 2 chunks of size 5Mi with 2 parallel streams 2026/03/19 01:09:04 DEBUG : test-multithread-copy-true-10485760-2: multi-thread copy: chunk 2/2 (5242880-10485760) size 5Mi starting 2026/03/19 01:09:04 DEBUG : test-multithread-copy-true-10485760-2: multi-thread copy: chunk 1/2 (0-5242880) size 5Mi starting 2026/03/19 01:09:04 DEBUG : test-multithread-copy-true-10485760-2: Seek from 5242880 to 0 2026/03/19 01:09:04 DEBUG : test-multithread-copy-true-10485760-2: Seek from 5242880 to 0 2026/03/19 01:09:05 DEBUG : test-multithread-copy-true-10485760-2: multipart upload wrote chunk 1 with 5242880 bytes and etag "299a8ceba9ee81209fb76c8a2ad12c0e" 2026/03/19 01:09:05 DEBUG : test-multithread-copy-true-10485760-2: multi-thread copy: chunk 1/2 (0-5242880) size 5Mi finished 2026/03/19 01:09:05 DEBUG : test-multithread-copy-true-10485760-2: multipart upload wrote chunk 2 with 5242880 bytes and etag "ebcda80e0acf8164bf7fce16d9a01d27" 2026/03/19 01:09:05 DEBUG : test-multithread-copy-true-10485760-2: multi-thread copy: chunk 2/2 (5242880-10485760) size 5Mi finished 2026/03/19 01:09:05 DEBUG : test-multithread-copy-true-10485760-2: multipart upload "AGQtd1hxYsfVM5Ob-tsJ3tlNePinyASsLGb-yNdgbWFFRXXQlA-79o-JO3_oqF0nSgLZkho8csxDYjU60OrwgeXZwQBk1HqvMs-596jSE1pmXE4VnjZAhTWWiNkKaHVIUiy3c989N_ijIi3RbvaRle4s42DrkZrDKfTOrJi7380ZO4d5vIqPleiBFzLhF_6_j3ZSODIPhg4m9GUVTzNAgNqLeRLODJ3T1lbkG0Z9cYRGn48iRZEB4hNdTTCIC7KH87V-BmwdG_tkKjH3WUOS4zqicTYHCuPUBX1ZZ41WNjise30wabyIBFxoJQo_VwpV7HmPJSk4lNt8z7ugPvDvqDo" finished 2026/03/19 01:09:05 DEBUG : test-multithread-copy-true-10485760-2: Finished multi-thread copy with 2 parts of size 5Mi === RUN TestMultithreadCopy/upload=true,size=10485761,streams=2 2026/03/19 01:09:07 DEBUG : test-multithread-copy-true-10485761-2: multi-thread copy: disabling buffering because source is local disk 2026/03/19 01:09:07 DEBUG : test-multithread-copy-true-10485761-2: open chunk writer: started multipart upload: AFs236UuM7RXSqNO7mz_gQ66-z7rwTJs-qNoHpEABURdYPB4oL0X9fnvmUsM-BK5oK6r2gpDJDK2XSVETOi70WTcuJOeL8DH69SFQLgijcMbtgXfCggah2uLn95ryZ3lHYSNLTL4_f5zfRWzdrUX76CZ0pdsM9agrMSXhNB_3fhhNeQyrdc0LESXyQrNmXcZFY4bWM_btkfLoZVqivuIsOosWgibl0Wv5ekkRUtdKTImPVRlIolUKXYNK7izo2sunCBiqO4Ss_SRZdiKRQ2YP2zizCC97e4zlX-qrtDGOAkAY_tGYRCtl9UftVkapmnE7Nj5j95M7vywIC0WFmF9tKA 2026/03/19 01:09:07 DEBUG : test-multithread-copy-true-10485761-2: multi-thread copy: using backend concurrency of 4 instead of --multi-thread-streams 2 2026/03/19 01:09:07 DEBUG : test-multithread-copy-true-10485761-2: multi-thread copy: number of streams 4 was bigger than number of chunks 3 2026/03/19 01:09:07 DEBUG : test-multithread-copy-true-10485761-2: Starting multi-thread copy with 3 chunks of size 5Mi with 3 parallel streams 2026/03/19 01:09:07 DEBUG : test-multithread-copy-true-10485761-2: multi-thread copy: chunk 3/3 (10485760-10485761) size 1 starting 2026/03/19 01:09:07 DEBUG : test-multithread-copy-true-10485761-2: multi-thread copy: chunk 1/3 (0-5242880) size 5Mi starting 2026/03/19 01:09:07 DEBUG : test-multithread-copy-true-10485761-2: multi-thread copy: chunk 2/3 (5242880-10485760) size 5Mi starting 2026/03/19 01:09:07 DEBUG : test-multithread-copy-true-10485761-2: Seek from 1 to 0 2026/03/19 01:09:07 DEBUG : test-multithread-copy-true-10485761-2: Seek from 5242880 to 0 2026/03/19 01:09:07 DEBUG : test-multithread-copy-true-10485761-2: Seek from 5242880 to 0 2026/03/19 01:09:07 DEBUG : test-multithread-copy-true-10485761-2: multipart upload wrote chunk 3 with 1 bytes and etag "8277e0910d750195b448797616e091ad" 2026/03/19 01:09:07 DEBUG : test-multithread-copy-true-10485761-2: multi-thread copy: chunk 3/3 (10485760-10485761) size 1 finished 2026/03/19 01:09:07 DEBUG : test-multithread-copy-true-10485761-2: multipart upload wrote chunk 2 with 5242880 bytes and etag "de6a981c38f0147238b8a65040ddbbcf" 2026/03/19 01:09:07 DEBUG : test-multithread-copy-true-10485761-2: multi-thread copy: chunk 2/3 (5242880-10485760) size 5Mi finished 2026/03/19 01:09:07 DEBUG : test-multithread-copy-true-10485761-2: multipart upload wrote chunk 1 with 5242880 bytes and etag "6e09ca07d2906f4769c87a012de407fc" 2026/03/19 01:09:07 DEBUG : test-multithread-copy-true-10485761-2: multi-thread copy: chunk 1/3 (0-5242880) size 5Mi finished 2026/03/19 01:09:07 DEBUG : test-multithread-copy-true-10485761-2: multipart upload "AFs236UuM7RXSqNO7mz_gQ66-z7rwTJs-qNoHpEABURdYPB4oL0X9fnvmUsM-BK5oK6r2gpDJDK2XSVETOi70WTcuJOeL8DH69SFQLgijcMbtgXfCggah2uLn95ryZ3lHYSNLTL4_f5zfRWzdrUX76CZ0pdsM9agrMSXhNB_3fhhNeQyrdc0LESXyQrNmXcZFY4bWM_btkfLoZVqivuIsOosWgibl0Wv5ekkRUtdKTImPVRlIolUKXYNK7izo2sunCBiqO4Ss_SRZdiKRQ2YP2zizCC97e4zlX-qrtDGOAkAY_tGYRCtl9UftVkapmnE7Nj5j95M7vywIC0WFmF9tKA" finished 2026/03/19 01:09:07 DEBUG : test-multithread-copy-true-10485761-2: Finished multi-thread copy with 3 parts of size 5Mi --- PASS: TestMultithreadCopy (15.24s) --- PASS: TestMultithreadCopy/upload=false,size=10485759,streams=2 (2.37s) --- PASS: TestMultithreadCopy/upload=false,size=10485760,streams=2 (2.11s) --- PASS: TestMultithreadCopy/upload=false,size=10485761,streams=2 (2.31s) --- PASS: TestMultithreadCopy/upload=true,size=10485759,streams=2 (2.43s) --- PASS: TestMultithreadCopy/upload=true,size=10485760,streams=2 (2.59s) --- PASS: TestMultithreadCopy/upload=true,size=10485761,streams=2 (2.43s) === RUN TestMultithreadCopyAbort run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" 2026/03/19 01:09:08 DEBUG : chunksize-probe: open chunk writer: started multipart upload: AK5Web1ng8QRFFTo5SrLeFor90Rj1dlMOVj7BRmovBzHSyWjdseC47HVLd2BFRbXlF5bnfH0XaKepAIXnAPCbrsAG4R2LgKipmr6x7yzn0fk7ZsHKORWojL3O6xboegvd38ckGk5ZJtWXuzlPpHCg1koYk3FVSB33MHdHin46UpI_9yu_qYtcqkMDwL8pwnnrrJrqMD4Vbg8WxqDWwK20wcACO4qlk5QmPssopBzoHapopXZvFJJMcGeqzvBwsIsnvdU2X8dLI-Ac5xJEyJtWuksgzlrNWBKS5_aIqCILFGza4rHWLqC0P5X94RQD1LaxSWCS53EU9pEeYkI2KjXbGM 2026/03/19 01:09:08 DEBUG : chunksize-probe: multipart upload "AK5Web1ng8QRFFTo5SrLeFor90Rj1dlMOVj7BRmovBzHSyWjdseC47HVLd2BFRbXlF5bnfH0XaKepAIXnAPCbrsAG4R2LgKipmr6x7yzn0fk7ZsHKORWojL3O6xboegvd38ckGk5ZJtWXuzlPpHCg1koYk3FVSB33MHdHin46UpI_9yu_qYtcqkMDwL8pwnnrrJrqMD4Vbg8WxqDWwK20wcACO4qlk5QmPssopBzoHapopXZvFJJMcGeqzvBwsIsnvdU2X8dLI-Ac5xJEyJtWuksgzlrNWBKS5_aIqCILFGza4rHWLqC0P5X94RQD1LaxSWCS53EU9pEeYkI2KjXbGM" aborted 2026/03/19 01:09:09 DEBUG : test-multithread-abort: multi-thread copy: disabling buffering because source is local disk 2026/03/19 01:09:10 DEBUG : test-multithread-abort: open chunk writer: started multipart upload: AH1xV3oR6nJbx68EOMwMSS7PQ8xm4e7Suc6cR_dYdQhBg5v9PtLzRcz7fwhAsYkro_y-8wLrnJBm2mjozLPp2UiQ9cszAh_ytjrBYFa98pCoP5ikRjeGpfYp6o9Xh3W4e_rW-tMiThJWibCPlf3TxKSjZJfmmfh4PR5HaZFaETzY5Gq_zJ3lvJmNLO7b0Q3hLiIHzpVPGk_cFjzAAAS0JzQKmolcRVNjJCJdAD2lLeln9LrRgXRZhrjzpgAM4K9CHKtAwqhpuvY6IFIXoxP1S1juHvdsZ4NwmGdbBkhMCjVWpTZT9UOGXKHYMmDzzq_y0YN6gaOPh8xxe7lx_7vIKPc 2026/03/19 01:09:10 DEBUG : test-multithread-abort: multi-thread copy: using backend concurrency of 4 instead of --multi-thread-streams 1 2026/03/19 01:09:10 DEBUG : test-multithread-abort: multi-thread copy: number of streams 4 was bigger than number of chunks 3 2026/03/19 01:09:10 DEBUG : test-multithread-abort: Starting multi-thread copy with 3 chunks of size 5Mi with 3 parallel streams 2026/03/19 01:09:10 DEBUG : test-multithread-abort: multi-thread copy: chunk 3/3 (10485760-10485761) size 1 starting 2026/03/19 01:09:10 DEBUG : Open with options = [RangeOption(10485760,10485760)] 2026/03/19 01:09:10 DEBUG : test-multithread-abort: multi-thread copy: chunk 1/3 (0-5242880) size 5Mi starting 2026/03/19 01:09:10 DEBUG : Open with options = [RangeOption(0,5242879)] 2026/03/19 01:09:10 DEBUG : test-multithread-abort: multi-thread copy: chunk 2/3 (5242880-10485760) size 5Mi starting 2026/03/19 01:09:10 DEBUG : Open with options = [RangeOption(5242880,10485759)] 2026/03/19 01:09:10 DEBUG : test-multithread-abort: Seek from 5242880 to 0 2026/03/19 01:09:10 DEBUG : Open with options = [RangeOption(0,5242879)] 2026/03/19 01:09:10 DEBUG : test-multithread-abort: Seek from 5242880 to 0 2026/03/19 01:09:10 DEBUG : Open with options = [RangeOption(5242880,10485759)] 2026/03/19 01:09:10 DEBUG : test-multithread-abort: multipart upload wrote chunk 1 with 5242880 bytes and etag "3c194ccaac72c3274680112bf9ad3c1b" 2026/03/19 01:09:10 DEBUG : test-multithread-abort: multi-thread copy: chunk 1/3 (0-5242880) size 5Mi finished 2026/03/19 01:09:10 DEBUG : test-multithread-abort: multipart upload wrote chunk 2 with 5242880 bytes and etag "ccbad12e55cbd09baf461bd6cf714a01" 2026/03/19 01:09:10 DEBUG : test-multithread-abort: multi-thread copy: chunk 2/3 (5242880-10485760) size 5Mi finished 2026/03/19 01:09:11 DEBUG : Returning error reader 2026/03/19 01:09:11 DEBUG : BOOM: simulated read failure 2026/03/19 01:09:11 DEBUG : test-multithread-abort: Reopening on read failure after offset 0 bytes: retry 1/10: BOOM: simulated read failure 2026/03/19 01:09:11 DEBUG : Open with options = [RangeOption(10485760,10485760)] 2026/03/19 01:09:12 DEBUG : Returning error reader 2026/03/19 01:09:12 DEBUG : BOOM: simulated read failure 2026/03/19 01:09:12 DEBUG : test-multithread-abort: Reopening on read failure after offset 0 bytes: retry 2/10: BOOM: simulated read failure 2026/03/19 01:09:12 DEBUG : Open with options = [RangeOption(10485760,10485760)] 2026/03/19 01:09:13 DEBUG : Returning error reader 2026/03/19 01:09:13 DEBUG : BOOM: simulated read failure 2026/03/19 01:09:13 DEBUG : test-multithread-abort: Reopening on read failure after offset 0 bytes: retry 3/10: BOOM: simulated read failure 2026/03/19 01:09:13 DEBUG : Open with options = [RangeOption(10485760,10485760)] 2026/03/19 01:09:14 DEBUG : Returning error reader 2026/03/19 01:09:14 DEBUG : BOOM: simulated read failure 2026/03/19 01:09:14 DEBUG : test-multithread-abort: Reopening on read failure after offset 0 bytes: retry 4/10: BOOM: simulated read failure 2026/03/19 01:09:14 DEBUG : Open with options = [RangeOption(10485760,10485760)] 2026/03/19 01:09:15 DEBUG : Returning error reader 2026/03/19 01:09:15 DEBUG : BOOM: simulated read failure 2026/03/19 01:09:15 DEBUG : test-multithread-abort: Reopening on read failure after offset 0 bytes: retry 5/10: BOOM: simulated read failure 2026/03/19 01:09:15 DEBUG : Open with options = [RangeOption(10485760,10485760)] 2026/03/19 01:09:16 DEBUG : Returning error reader 2026/03/19 01:09:16 DEBUG : BOOM: simulated read failure 2026/03/19 01:09:16 DEBUG : test-multithread-abort: Reopening on read failure after offset 0 bytes: retry 6/10: BOOM: simulated read failure 2026/03/19 01:09:16 DEBUG : Open with options = [RangeOption(10485760,10485760)] 2026/03/19 01:09:17 DEBUG : Returning error reader 2026/03/19 01:09:17 DEBUG : BOOM: simulated read failure 2026/03/19 01:09:17 DEBUG : test-multithread-abort: Reopening on read failure after offset 0 bytes: retry 7/10: BOOM: simulated read failure 2026/03/19 01:09:17 DEBUG : Open with options = [RangeOption(10485760,10485760)] 2026/03/19 01:09:18 DEBUG : Returning error reader 2026/03/19 01:09:18 DEBUG : BOOM: simulated read failure 2026/03/19 01:09:18 DEBUG : test-multithread-abort: Reopening on read failure after offset 0 bytes: retry 8/10: BOOM: simulated read failure 2026/03/19 01:09:18 DEBUG : Open with options = [RangeOption(10485760,10485760)] 2026/03/19 01:09:19 DEBUG : Returning error reader 2026/03/19 01:09:19 DEBUG : BOOM: simulated read failure 2026/03/19 01:09:19 DEBUG : test-multithread-abort: Reopening on read failure after offset 0 bytes: retry 9/10: BOOM: simulated read failure 2026/03/19 01:09:19 DEBUG : Open with options = [RangeOption(10485760,10485760)] 2026/03/19 01:09:20 DEBUG : Returning error reader 2026/03/19 01:09:20 DEBUG : BOOM: simulated read failure 2026/03/19 01:09:20 DEBUG : test-multithread-abort: Reopening on read failure after offset 0 bytes: retry 10/10: BOOM: simulated read failure 2026/03/19 01:09:20 DEBUG : test-multithread-abort: Reopen failed after offset 0 bytes read: failed to reopen: too many retries 2026/03/19 01:09:20 DEBUG : test-multithread-abort: multi-thread copy: chunk 3/3 failed: multi-thread copy: failed to write chunk: BOOM: simulated read failure 2026/03/19 01:09:20 DEBUG : test-multithread-abort: multi-thread copy: cancelling transfer on exit 2026/03/19 01:09:20 DEBUG : test-multithread-abort: multipart upload "AH1xV3oR6nJbx68EOMwMSS7PQ8xm4e7Suc6cR_dYdQhBg5v9PtLzRcz7fwhAsYkro_y-8wLrnJBm2mjozLPp2UiQ9cszAh_ytjrBYFa98pCoP5ikRjeGpfYp6o9Xh3W4e_rW-tMiThJWibCPlf3TxKSjZJfmmfh4PR5HaZFaETzY5Gq_zJ3lvJmNLO7b0Q3hLiIHzpVPGk_cFjzAAAS0JzQKmolcRVNjJCJdAD2lLeln9LrRgXRZhrjzpgAM4K9CHKtAwqhpuvY6IFIXoxP1S1juHvdsZ4NwmGdbBkhMCjVWpTZT9UOGXKHYMmDzzq_y0YN6gaOPh8xxe7lx_7vIKPc" aborted --- PASS: TestMultithreadCopyAbort (11.92s) === RUN TestSizeDiffers 2026/03/19 01:09:20 DEBUG : a: size = 0 OK 2026/03/19 01:09:20 DEBUG : a: size = 1 (memory) 2026/03/19 01:09:20 DEBUG : a: size = 2 (memory) --- PASS: TestSizeDiffers (0.00s) === RUN TestReOpen === RUN TestReOpen/Normal === RUN TestReOpen/Normal/Basics 2026/03/19 01:09:20 DEBUG : potato: Seek from 10 to 0 === RUN TestReOpen/Normal/ErrorAtStart === RUN TestReOpen/Normal/WithErrors 2026/03/19 01:09:20 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 1/10: test error 2026/03/19 01:09:20 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 2/10: test error 2026/03/19 01:09:20 DEBUG : potato: Reopening on read failure after offset 6 bytes: retry 3/10: test error === RUN TestReOpen/Normal/TooManyErrors 2026/03/19 01:09:20 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 1/3: test error 2026/03/19 01:09:20 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 2/3: test error 2026/03/19 01:09:20 DEBUG : potato: Reopening on read failure after offset 6 bytes: retry 3/3: test error 2026/03/19 01:09:20 DEBUG : potato: Reopen failed after offset 6 bytes read: failed to reopen: too many retries === RUN TestReOpen/Normal/ReadAt 2026/03/19 01:09:20 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 0/10: test error 2026/03/19 01:09:20 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 1/10: test error 2026/03/19 01:09:20 DEBUG : potato: Seek from 5 to 1 === RUN TestReOpen/Normal/Seek 2026/03/19 01:09:20 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 0/10: test error 2026/03/19 01:09:20 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 1/10: test error 2026/03/19 01:09:20 DEBUG : potato: Seek from 5 to 2 === RUN TestReOpen/Normal/AccountRead === RUN TestReOpen/Normal/AccountReadDelay 2026/03/19 01:09:20 DEBUG : potato: Seek from 10 to 0 2026/03/19 01:09:20 DEBUG : potato: Seek from 10 to 0 2026/03/19 01:09:20 DEBUG : potato: Seek from 10 to 0 === RUN TestReOpen/Normal/AccountReadError === RUN TestReOpen/WithRangeOption === RUN TestReOpen/WithRangeOption/Basics 2026/03/19 01:09:20 DEBUG : potato: Seek from 7 to 0 === RUN TestReOpen/WithRangeOption/ErrorAtStart === RUN TestReOpen/WithRangeOption/WithErrors 2026/03/19 01:09:20 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 1/10: test error 2026/03/19 01:09:20 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 2/10: test error 2026/03/19 01:09:20 DEBUG : potato: Reopening on read failure after offset 6 bytes: retry 3/10: test error === RUN TestReOpen/WithRangeOption/TooManyErrors 2026/03/19 01:09:20 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 1/3: test error 2026/03/19 01:09:20 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 2/3: test error 2026/03/19 01:09:20 DEBUG : potato: Reopening on read failure after offset 6 bytes: retry 3/3: test error 2026/03/19 01:09:20 DEBUG : potato: Reopen failed after offset 6 bytes read: failed to reopen: too many retries === RUN TestReOpen/WithRangeOption/ReadAt 2026/03/19 01:09:20 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 0/10: test error 2026/03/19 01:09:20 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 1/10: test error 2026/03/19 01:09:20 DEBUG : potato: Seek from 5 to 1 === RUN TestReOpen/WithRangeOption/Seek 2026/03/19 01:09:20 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 0/10: test error 2026/03/19 01:09:20 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 1/10: test error 2026/03/19 01:09:20 DEBUG : potato: Seek from 5 to 2 2026/03/19 01:09:20 DEBUG : potato: Seek from 7 to 4 === RUN TestReOpen/WithRangeOption/AccountRead === RUN TestReOpen/WithRangeOption/AccountReadDelay 2026/03/19 01:09:20 DEBUG : potato: Seek from 7 to 0 2026/03/19 01:09:20 DEBUG : potato: Seek from 7 to 0 2026/03/19 01:09:20 DEBUG : potato: Seek from 7 to 0 === RUN TestReOpen/WithRangeOption/AccountReadError === RUN TestReOpen/WithSeekOption === RUN TestReOpen/WithSeekOption/Basics 2026/03/19 01:09:20 DEBUG : potato: Seek from 8 to 0 === RUN TestReOpen/WithSeekOption/ErrorAtStart === RUN TestReOpen/WithSeekOption/WithErrors 2026/03/19 01:09:20 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 1/10: test error 2026/03/19 01:09:20 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 2/10: test error 2026/03/19 01:09:20 DEBUG : potato: Reopening on read failure after offset 6 bytes: retry 3/10: test error === RUN TestReOpen/WithSeekOption/TooManyErrors 2026/03/19 01:09:20 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 1/3: test error 2026/03/19 01:09:20 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 2/3: test error 2026/03/19 01:09:20 DEBUG : potato: Reopening on read failure after offset 6 bytes: retry 3/3: test error 2026/03/19 01:09:20 DEBUG : potato: Reopen failed after offset 6 bytes read: failed to reopen: too many retries === RUN TestReOpen/WithSeekOption/ReadAt 2026/03/19 01:09:20 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 0/10: test error 2026/03/19 01:09:20 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 1/10: test error 2026/03/19 01:09:20 DEBUG : potato: Seek from 5 to 1 === RUN TestReOpen/WithSeekOption/Seek 2026/03/19 01:09:20 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 0/10: test error 2026/03/19 01:09:20 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 1/10: test error 2026/03/19 01:09:20 DEBUG : potato: Seek from 5 to 2 2026/03/19 01:09:20 DEBUG : potato: Seek from 7 to 5 === RUN TestReOpen/WithSeekOption/AccountRead === RUN TestReOpen/WithSeekOption/AccountReadDelay 2026/03/19 01:09:20 DEBUG : potato: Seek from 8 to 0 2026/03/19 01:09:20 DEBUG : potato: Seek from 8 to 0 2026/03/19 01:09:20 DEBUG : potato: Seek from 8 to 0 === RUN TestReOpen/WithSeekOption/AccountReadError === RUN TestReOpen/UnknownSize === RUN TestReOpen/UnknownSize/Basics 2026/03/19 01:09:20 DEBUG : potato: Seek from 9 to 0 === RUN TestReOpen/UnknownSize/ErrorAtStart === RUN TestReOpen/UnknownSize/WithErrors 2026/03/19 01:09:20 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 1/10: test error 2026/03/19 01:09:20 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 2/10: test error 2026/03/19 01:09:20 DEBUG : potato: Reopening on read failure after offset 6 bytes: retry 3/10: test error === RUN TestReOpen/UnknownSize/TooManyErrors 2026/03/19 01:09:20 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 1/3: test error 2026/03/19 01:09:20 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 2/3: test error 2026/03/19 01:09:20 DEBUG : potato: Reopening on read failure after offset 6 bytes: retry 3/3: test error 2026/03/19 01:09:20 DEBUG : potato: Reopen failed after offset 6 bytes read: failed to reopen: too many retries === RUN TestReOpen/UnknownSize/ReadAt 2026/03/19 01:09:20 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 0/10: test error 2026/03/19 01:09:20 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 1/10: test error 2026/03/19 01:09:20 DEBUG : potato: Seek from 5 to 1 === RUN TestReOpen/UnknownSize/Seek 2026/03/19 01:09:20 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 0/10: test error 2026/03/19 01:09:20 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 1/10: test error 2026/03/19 01:09:20 DEBUG : potato: Seek from 5 to 2 2026/03/19 01:09:20 DEBUG : potato: Seek from 7 to 6 === RUN TestReOpen/UnknownSize/AccountRead === RUN TestReOpen/UnknownSize/AccountReadDelay 2026/03/19 01:09:20 DEBUG : potato: Seek from 9 to 0 2026/03/19 01:09:20 DEBUG : potato: Seek from 9 to 0 2026/03/19 01:09:20 DEBUG : potato: Seek from 9 to 0 === RUN TestReOpen/UnknownSize/AccountReadError --- PASS: TestReOpen (0.00s) --- PASS: TestReOpen/Normal (0.00s) --- PASS: TestReOpen/Normal/Basics (0.00s) --- PASS: TestReOpen/Normal/ErrorAtStart (0.00s) --- PASS: TestReOpen/Normal/WithErrors (0.00s) --- PASS: TestReOpen/Normal/TooManyErrors (0.00s) --- PASS: TestReOpen/Normal/ReadAt (0.00s) --- PASS: TestReOpen/Normal/Seek (0.00s) --- PASS: TestReOpen/Normal/AccountRead (0.00s) --- PASS: TestReOpen/Normal/AccountReadDelay (0.00s) --- PASS: TestReOpen/Normal/AccountReadError (0.00s) --- PASS: TestReOpen/WithRangeOption (0.00s) --- PASS: TestReOpen/WithRangeOption/Basics (0.00s) --- PASS: TestReOpen/WithRangeOption/ErrorAtStart (0.00s) --- PASS: TestReOpen/WithRangeOption/WithErrors (0.00s) --- PASS: TestReOpen/WithRangeOption/TooManyErrors (0.00s) --- PASS: TestReOpen/WithRangeOption/ReadAt (0.00s) --- PASS: TestReOpen/WithRangeOption/Seek (0.00s) --- PASS: TestReOpen/WithRangeOption/AccountRead (0.00s) --- PASS: TestReOpen/WithRangeOption/AccountReadDelay (0.00s) --- PASS: TestReOpen/WithRangeOption/AccountReadError (0.00s) --- PASS: TestReOpen/WithSeekOption (0.00s) --- PASS: TestReOpen/WithSeekOption/Basics (0.00s) --- PASS: TestReOpen/WithSeekOption/ErrorAtStart (0.00s) --- PASS: TestReOpen/WithSeekOption/WithErrors (0.00s) --- PASS: TestReOpen/WithSeekOption/TooManyErrors (0.00s) --- PASS: TestReOpen/WithSeekOption/ReadAt (0.00s) --- PASS: TestReOpen/WithSeekOption/Seek (0.00s) --- PASS: TestReOpen/WithSeekOption/AccountRead (0.00s) --- PASS: TestReOpen/WithSeekOption/AccountReadDelay (0.00s) --- PASS: TestReOpen/WithSeekOption/AccountReadError (0.00s) --- PASS: TestReOpen/UnknownSize (0.00s) --- PASS: TestReOpen/UnknownSize/Basics (0.00s) --- PASS: TestReOpen/UnknownSize/ErrorAtStart (0.00s) --- PASS: TestReOpen/UnknownSize/WithErrors (0.00s) --- PASS: TestReOpen/UnknownSize/TooManyErrors (0.00s) --- PASS: TestReOpen/UnknownSize/ReadAt (0.00s) --- PASS: TestReOpen/UnknownSize/Seek (0.00s) --- PASS: TestReOpen/UnknownSize/AccountRead (0.00s) --- PASS: TestReOpen/UnknownSize/AccountReadDelay (0.00s) --- PASS: TestReOpen/UnknownSize/AccountReadError (0.00s) === RUN TestCheck run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" === RUN TestCheck/1 === RUN TestCheck/2 === RUN TestCheck/3 === RUN TestCheck/4 === RUN TestCheck/5 === RUN TestCheck/6 === RUN TestCheck/7 --- PASS: TestCheck (2.59s) --- PASS: TestCheck/1 (0.06s) --- PASS: TestCheck/2 (0.05s) --- PASS: TestCheck/3 (0.07s) --- PASS: TestCheck/4 (0.06s) --- PASS: TestCheck/5 (0.05s) --- PASS: TestCheck/6 (0.06s) --- PASS: TestCheck/7 (0.06s) === RUN TestCheckFsError 2026/03/19 01:09:23 DEBUG : Creating backend with remote "nonexistent" 2026/03/19 01:09:23 DEBUG : Creating backend with remote "nonexistent" 2026/03/19 01:09:23 DEBUG : Local file system at /home/rclone/go/src/github.com/rclone/rclone/fs/operations/nonexistent: Waiting for checks to finish 2026/03/19 01:09:23 ERROR : Local file system at /home/rclone/go/src/github.com/rclone/rclone/fs/operations/nonexistent: error reading source root directory: directory not found 2026/03/19 01:09:23 NOTICE: Local file system at /home/rclone/go/src/github.com/rclone/rclone/fs/operations/nonexistent: 0 differences found 2026/03/19 01:09:23 NOTICE: Local file system at /home/rclone/go/src/github.com/rclone/rclone/fs/operations/nonexistent: 2 errors while checking --- PASS: TestCheckFsError (0.00s) === RUN TestCheckDownload run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" === RUN TestCheckDownload/1 === RUN TestCheckDownload/2 === RUN TestCheckDownload/3 === RUN TestCheckDownload/4 === RUN TestCheckDownload/5 === RUN TestCheckDownload/6 === RUN TestCheckDownload/7 --- PASS: TestCheckDownload (2.91s) --- PASS: TestCheckDownload/1 (0.12s) --- PASS: TestCheckDownload/2 (0.13s) --- PASS: TestCheckDownload/3 (0.11s) --- PASS: TestCheckDownload/4 (0.13s) --- PASS: TestCheckDownload/5 (0.12s) --- PASS: TestCheckDownload/6 (0.12s) --- PASS: TestCheckDownload/7 (0.12s) === RUN TestCheckSizeOnly run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" === RUN TestCheckSizeOnly/1 === RUN TestCheckSizeOnly/2 === RUN TestCheckSizeOnly/3 === RUN TestCheckSizeOnly/4 === RUN TestCheckSizeOnly/5 === RUN TestCheckSizeOnly/6 === RUN TestCheckSizeOnly/7 --- PASS: TestCheckSizeOnly (2.33s) --- PASS: TestCheckSizeOnly/1 (0.06s) --- PASS: TestCheckSizeOnly/2 (0.05s) --- PASS: TestCheckSizeOnly/3 (0.05s) --- PASS: TestCheckSizeOnly/4 (0.05s) --- PASS: TestCheckSizeOnly/5 (0.05s) --- PASS: TestCheckSizeOnly/6 (0.05s) --- PASS: TestCheckSizeOnly/7 (0.05s) === RUN TestCheckEqualReaders --- PASS: TestCheckEqualReaders (0.00s) === RUN TestParseSumFile run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" 2026/03/19 01:09:28 NOTICE: test.sum: improperly formatted checksum line 4 2026/03/19 01:09:28 NOTICE: test.sum: improperly formatted checksum line 5 2026/03/19 01:09:28 NOTICE: test.sum: improperly formatted checksum line 6 2026/03/19 01:09:28 NOTICE: test.sum: 2 warning(s) suppressed... 2026/03/19 01:09:28 NOTICE: test.sum: improperly formatted checksum line 4 2026/03/19 01:09:28 NOTICE: test.sum: improperly formatted checksum line 5 2026/03/19 01:09:28 NOTICE: test.sum: improperly formatted checksum line 6 2026/03/19 01:09:28 NOTICE: test.sum: 2 warning(s) suppressed... --- PASS: TestParseSumFile (0.80s) === RUN TestCheckSum run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" 2026/03/19 01:09:29 DEBUG : Creating backend with remote "TestS3R2:rclone-test-pivisat0jeto/data" === RUN TestCheckSum/subtest1 === RUN TestCheckSum/subtest2 === RUN TestCheckSum/subtest3 === RUN TestCheckSum/subtest4 === RUN TestCheckSum/subtest5 === RUN TestCheckSum/subtest6 === RUN TestCheckSum/subtest7 --- PASS: TestCheckSum (5.32s) --- PASS: TestCheckSum/subtest1 (0.18s) --- PASS: TestCheckSum/subtest2 (0.17s) --- PASS: TestCheckSum/subtest3 (0.16s) --- PASS: TestCheckSum/subtest4 (0.17s) --- PASS: TestCheckSum/subtest5 (0.19s) --- PASS: TestCheckSum/subtest6 (0.16s) --- PASS: TestCheckSum/subtest7 (0.17s) === RUN TestCheckSumDownload run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" 2026/03/19 01:09:34 DEBUG : Creating backend with remote "TestS3R2:rclone-test-pivisat0jeto/data" === RUN TestCheckSumDownload/subtest1 === RUN TestCheckSumDownload/subtest2 === RUN TestCheckSumDownload/subtest3 === RUN TestCheckSumDownload/subtest4 === RUN TestCheckSumDownload/subtest5 === RUN TestCheckSumDownload/subtest6 === RUN TestCheckSumDownload/subtest7 --- PASS: TestCheckSumDownload (6.47s) --- PASS: TestCheckSumDownload/subtest1 (0.23s) --- PASS: TestCheckSumDownload/subtest2 (0.23s) --- PASS: TestCheckSumDownload/subtest3 (0.37s) --- PASS: TestCheckSumDownload/subtest4 (0.33s) --- PASS: TestCheckSumDownload/subtest5 (0.26s) --- PASS: TestCheckSumDownload/subtest6 (0.51s) --- PASS: TestCheckSumDownload/subtest7 (0.36s) === RUN TestApplyTransforms 2026/03/19 01:09:40 DEBUG : Creating backend with remote "TestS3R2:rclone-test-ropedeg6mapu" 2026/03/19 01:09:40 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2026/03/19 01:09:40 DEBUG : Creating backend with remote "/tmp/rclone3452857033" run.go:185: Remote "S3 bucket rclone-test-ropedeg6mapu", Local "Local file system at /tmp/rclone3452857033", Modify Window "1ns" 2026/03/19 01:09:41 INFO : S3 bucket rclone-test-ropedeg6mapu: Bucket "rclone-test-ropedeg6mapu" created with ACL "" upper checkfile vs. lower remote (without normalization) 2026/03/19 01:09:41 ERROR : hello, world!: sum not found 2026/03/19 01:09:41 ERROR : HELLO, WORLD!: file not in S3 bucket rclone-test-ropedeg6mapu 2026/03/19 01:09:41 NOTICE: S3 bucket rclone-test-ropedeg6mapu: 1 files missing 2026/03/19 01:09:41 NOTICE: 1 hashes missing 2026/03/19 01:09:41 NOTICE: S3 bucket rclone-test-ropedeg6mapu: 1 differences found 2026/03/19 01:09:41 NOTICE: S3 bucket rclone-test-ropedeg6mapu: 2 errors while checking upper checkfile vs. lower remote (with normalization) 2026/03/19 01:09:42 DEBUG : hello, world!: md5 = 65a8e27d8879283831b664bd8b7f0ad4 OK 2026/03/19 01:09:42 NOTICE: S3 bucket rclone-test-ropedeg6mapu: 0 differences found 2026/03/19 01:09:42 NOTICE: S3 bucket rclone-test-ropedeg6mapu: 1 matching files 2026/03/19 01:09:42 DEBUG : Creating backend with remote "TestS3R2:rclone-test-xopogek8joze" 2026/03/19 01:09:42 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2026/03/19 01:09:42 DEBUG : Creating backend with remote "/tmp/rclone3814085210" run.go:185: Remote "S3 bucket rclone-test-xopogek8joze", Local "Local file system at /tmp/rclone3814085210", Modify Window "1ns" 2026/03/19 01:09:42 INFO : S3 bucket rclone-test-xopogek8joze: Bucket "rclone-test-xopogek8joze" created with ACL "" lower checkfile vs. upper remote (without normalization) 2026/03/19 01:09:43 ERROR : HELLO, WORLD!: sum not found 2026/03/19 01:09:43 ERROR : hello, world!: file not in S3 bucket rclone-test-xopogek8joze 2026/03/19 01:09:43 NOTICE: S3 bucket rclone-test-xopogek8joze: 1 files missing 2026/03/19 01:09:43 NOTICE: 1 hashes missing 2026/03/19 01:09:43 NOTICE: S3 bucket rclone-test-xopogek8joze: 1 differences found 2026/03/19 01:09:43 NOTICE: S3 bucket rclone-test-xopogek8joze: 2 errors while checking lower checkfile vs. upper remote (with normalization) 2026/03/19 01:09:43 DEBUG : HELLO, WORLD!: md5 = 65a8e27d8879283831b664bd8b7f0ad4 OK 2026/03/19 01:09:43 NOTICE: S3 bucket rclone-test-xopogek8joze: 0 differences found 2026/03/19 01:09:43 NOTICE: S3 bucket rclone-test-xopogek8joze: 1 matching files 2026/03/19 01:09:43 DEBUG : Creating backend with remote "TestS3R2:rclone-test-zanepiw0vogu" 2026/03/19 01:09:43 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2026/03/19 01:09:43 DEBUG : Creating backend with remote "/tmp/rclone11649092" run.go:185: Remote "S3 bucket rclone-test-zanepiw0vogu", Local "Local file system at /tmp/rclone11649092", Modify Window "1ns" 2026/03/19 01:09:44 INFO : S3 bucket rclone-test-zanepiw0vogu: Bucket "rclone-test-zanepiw0vogu" created with ACL "" lower checkfile vs. upperlowermixed remote (without normalization) 2026/03/19 01:09:44 ERROR : HeLlO, wOrLd!: sum not found 2026/03/19 01:09:44 ERROR : hello, world!: file not in S3 bucket rclone-test-zanepiw0vogu 2026/03/19 01:09:44 NOTICE: S3 bucket rclone-test-zanepiw0vogu: 1 files missing 2026/03/19 01:09:44 NOTICE: 1 hashes missing 2026/03/19 01:09:44 NOTICE: S3 bucket rclone-test-zanepiw0vogu: 1 differences found 2026/03/19 01:09:44 NOTICE: S3 bucket rclone-test-zanepiw0vogu: 2 errors while checking lower checkfile vs. upperlowermixed remote (with normalization) 2026/03/19 01:09:44 DEBUG : HeLlO, wOrLd!: md5 = 65a8e27d8879283831b664bd8b7f0ad4 OK 2026/03/19 01:09:44 NOTICE: S3 bucket rclone-test-zanepiw0vogu: 0 differences found 2026/03/19 01:09:44 NOTICE: S3 bucket rclone-test-zanepiw0vogu: 1 matching files 2026/03/19 01:09:44 DEBUG : Creating backend with remote "TestS3R2:rclone-test-kumuqud0kafu" 2026/03/19 01:09:44 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2026/03/19 01:09:44 DEBUG : Creating backend with remote "/tmp/rclone3545073224" run.go:185: Remote "S3 bucket rclone-test-kumuqud0kafu", Local "Local file system at /tmp/rclone3545073224", Modify Window "1ns" 2026/03/19 01:09:45 INFO : S3 bucket rclone-test-kumuqud0kafu: Bucket "rclone-test-kumuqud0kafu" created with ACL "" upperlowermixed checkfile vs. upper remote (without normalization) 2026/03/19 01:09:45 ERROR : HELLO, WORLD!: sum not found 2026/03/19 01:09:45 ERROR : HeLlO, wOrLd!: file not in S3 bucket rclone-test-kumuqud0kafu 2026/03/19 01:09:45 NOTICE: S3 bucket rclone-test-kumuqud0kafu: 1 files missing 2026/03/19 01:09:45 NOTICE: 1 hashes missing 2026/03/19 01:09:45 NOTICE: S3 bucket rclone-test-kumuqud0kafu: 1 differences found 2026/03/19 01:09:45 NOTICE: S3 bucket rclone-test-kumuqud0kafu: 2 errors while checking upperlowermixed checkfile vs. upper remote (with normalization) 2026/03/19 01:09:45 DEBUG : HELLO, WORLD!: md5 = 65a8e27d8879283831b664bd8b7f0ad4 OK 2026/03/19 01:09:45 NOTICE: S3 bucket rclone-test-kumuqud0kafu: 0 differences found 2026/03/19 01:09:45 NOTICE: S3 bucket rclone-test-kumuqud0kafu: 1 matching files 2026/03/19 01:09:45 DEBUG : Creating backend with remote "TestS3R2:rclone-test-poduzaf0foda" 2026/03/19 01:09:45 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2026/03/19 01:09:45 DEBUG : Creating backend with remote "/tmp/rclone438462598" run.go:185: Remote "S3 bucket rclone-test-poduzaf0foda", Local "Local file system at /tmp/rclone438462598", Modify Window "1ns" 2026/03/19 01:09:46 INFO : S3 bucket rclone-test-poduzaf0foda: Bucket "rclone-test-poduzaf0foda" created with ACL "" NFD checkfile vs. NFC remote (without normalization) 2026/03/19 01:09:46 ERROR : 測試_Русский___ě_áñ: sum not found 2026/03/19 01:09:46 ERROR : 測試_Русский___ě_áñ: file not in S3 bucket rclone-test-poduzaf0foda 2026/03/19 01:09:46 NOTICE: S3 bucket rclone-test-poduzaf0foda: 1 files missing 2026/03/19 01:09:46 NOTICE: 1 hashes missing 2026/03/19 01:09:46 NOTICE: S3 bucket rclone-test-poduzaf0foda: 1 differences found 2026/03/19 01:09:46 NOTICE: S3 bucket rclone-test-poduzaf0foda: 2 errors while checking NFD checkfile vs. NFC remote (with normalization) 2026/03/19 01:09:46 DEBUG : 測試_Русский___ě_áñ: md5 = 65a8e27d8879283831b664bd8b7f0ad4 OK 2026/03/19 01:09:46 NOTICE: S3 bucket rclone-test-poduzaf0foda: 0 differences found 2026/03/19 01:09:46 NOTICE: S3 bucket rclone-test-poduzaf0foda: 1 matching files 2026/03/19 01:09:46 DEBUG : Creating backend with remote "TestS3R2:rclone-test-cugefot2jemo" 2026/03/19 01:09:46 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2026/03/19 01:09:46 DEBUG : Creating backend with remote "/tmp/rclone2022373414" run.go:185: Remote "S3 bucket rclone-test-cugefot2jemo", Local "Local file system at /tmp/rclone2022373414", Modify Window "1ns" 2026/03/19 01:09:47 INFO : S3 bucket rclone-test-cugefot2jemo: Bucket "rclone-test-cugefot2jemo" created with ACL "" NFC checkfile vs. NFD remote (without normalization) 2026/03/19 01:09:48 ERROR : 測試_Русский___ě_áñ: sum not found 2026/03/19 01:09:48 ERROR : 測試_Русский___ě_áñ: file not in S3 bucket rclone-test-cugefot2jemo 2026/03/19 01:09:48 NOTICE: S3 bucket rclone-test-cugefot2jemo: 1 files missing 2026/03/19 01:09:48 NOTICE: 1 hashes missing 2026/03/19 01:09:48 NOTICE: S3 bucket rclone-test-cugefot2jemo: 1 differences found 2026/03/19 01:09:48 NOTICE: S3 bucket rclone-test-cugefot2jemo: 2 errors while checking NFC checkfile vs. NFD remote (with normalization) 2026/03/19 01:09:48 DEBUG : 測試_Русский___ě_áñ: md5 = 65a8e27d8879283831b664bd8b7f0ad4 OK 2026/03/19 01:09:48 NOTICE: S3 bucket rclone-test-cugefot2jemo: 0 differences found 2026/03/19 01:09:48 NOTICE: S3 bucket rclone-test-cugefot2jemo: 1 matching files 2026/03/19 01:09:48 DEBUG : Creating backend with remote "TestS3R2:rclone-test-poqazun1wegu" 2026/03/19 01:09:48 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2026/03/19 01:09:48 DEBUG : Creating backend with remote "/tmp/rclone583317199" run.go:185: Remote "S3 bucket rclone-test-poqazun1wegu", Local "Local file system at /tmp/rclone583317199", Modify Window "1ns" 2026/03/19 01:09:48 INFO : S3 bucket rclone-test-poqazun1wegu: Bucket "rclone-test-poqazun1wegu" created with ACL "" NFDx2 checkfile vs. both remote (without normalization) 2026/03/19 01:09:49 ERROR : 測試_Русский___ě_áñ測試_Русский___ě_áñ: sum not found 2026/03/19 01:09:49 ERROR : 測試_Русский___ě_áñ測試_Русский___ě_áñ: file not in S3 bucket rclone-test-poqazun1wegu 2026/03/19 01:09:49 NOTICE: S3 bucket rclone-test-poqazun1wegu: 1 files missing 2026/03/19 01:09:49 NOTICE: 1 hashes missing 2026/03/19 01:09:49 NOTICE: S3 bucket rclone-test-poqazun1wegu: 1 differences found 2026/03/19 01:09:49 NOTICE: S3 bucket rclone-test-poqazun1wegu: 2 errors while checking NFDx2 checkfile vs. both remote (with normalization) 2026/03/19 01:09:49 DEBUG : 測試_Русский___ě_áñ測試_Русский___ě_áñ: md5 = 65a8e27d8879283831b664bd8b7f0ad4 OK 2026/03/19 01:09:49 NOTICE: S3 bucket rclone-test-poqazun1wegu: 0 differences found 2026/03/19 01:09:49 NOTICE: S3 bucket rclone-test-poqazun1wegu: 1 matching files 2026/03/19 01:09:49 DEBUG : Creating backend with remote "TestS3R2:rclone-test-guhiril4lala" 2026/03/19 01:09:49 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2026/03/19 01:09:49 DEBUG : Creating backend with remote "/tmp/rclone2077565902" run.go:185: Remote "S3 bucket rclone-test-guhiril4lala", Local "Local file system at /tmp/rclone2077565902", Modify Window "1ns" 2026/03/19 01:09:50 INFO : S3 bucket rclone-test-guhiril4lala: Bucket "rclone-test-guhiril4lala" created with ACL "" NFCx2 checkfile vs. both remote (without normalization) 2026/03/19 01:09:50 ERROR : 測試_Русский___ě_áñ測試_Русский___ě_áñ: sum not found 2026/03/19 01:09:50 ERROR : 測試_Русский___ě_áñ測試_Русский___ě_áñ: file not in S3 bucket rclone-test-guhiril4lala 2026/03/19 01:09:50 NOTICE: S3 bucket rclone-test-guhiril4lala: 1 files missing 2026/03/19 01:09:50 NOTICE: 1 hashes missing 2026/03/19 01:09:50 NOTICE: S3 bucket rclone-test-guhiril4lala: 1 differences found 2026/03/19 01:09:50 NOTICE: S3 bucket rclone-test-guhiril4lala: 2 errors while checking NFCx2 checkfile vs. both remote (with normalization) 2026/03/19 01:09:50 DEBUG : 測試_Русский___ě_áñ測試_Русский___ě_áñ: md5 = 65a8e27d8879283831b664bd8b7f0ad4 OK 2026/03/19 01:09:50 NOTICE: S3 bucket rclone-test-guhiril4lala: 0 differences found 2026/03/19 01:09:50 NOTICE: S3 bucket rclone-test-guhiril4lala: 1 matching files 2026/03/19 01:09:50 DEBUG : Creating backend with remote "TestS3R2:rclone-test-zebuqol3rexa" 2026/03/19 01:09:50 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2026/03/19 01:09:50 DEBUG : Creating backend with remote "/tmp/rclone2730160586" run.go:185: Remote "S3 bucket rclone-test-zebuqol3rexa", Local "Local file system at /tmp/rclone2730160586", Modify Window "1ns" 2026/03/19 01:09:51 INFO : S3 bucket rclone-test-zebuqol3rexa: Bucket "rclone-test-zebuqol3rexa" created with ACL "" both checkfile vs. NFDx2 remote (without normalization) 2026/03/19 01:09:51 ERROR : 測試_Русский___ě_áñ測試_Русский___ě_áñ: sum not found 2026/03/19 01:09:51 ERROR : 測試_Русский___ě_áñ測試_Русский___ě_áñ: file not in S3 bucket rclone-test-zebuqol3rexa 2026/03/19 01:09:51 NOTICE: S3 bucket rclone-test-zebuqol3rexa: 1 files missing 2026/03/19 01:09:51 NOTICE: 1 hashes missing 2026/03/19 01:09:51 NOTICE: S3 bucket rclone-test-zebuqol3rexa: 1 differences found 2026/03/19 01:09:51 NOTICE: S3 bucket rclone-test-zebuqol3rexa: 2 errors while checking both checkfile vs. NFDx2 remote (with normalization) 2026/03/19 01:09:51 DEBUG : 測試_Русский___ě_áñ測試_Русский___ě_áñ: md5 = 65a8e27d8879283831b664bd8b7f0ad4 OK 2026/03/19 01:09:51 NOTICE: S3 bucket rclone-test-zebuqol3rexa: 0 differences found 2026/03/19 01:09:51 NOTICE: S3 bucket rclone-test-zebuqol3rexa: 1 matching files 2026/03/19 01:09:51 DEBUG : Creating backend with remote "TestS3R2:rclone-test-gosepoj2befo" 2026/03/19 01:09:51 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2026/03/19 01:09:51 DEBUG : Creating backend with remote "/tmp/rclone632418440" run.go:185: Remote "S3 bucket rclone-test-gosepoj2befo", Local "Local file system at /tmp/rclone632418440", Modify Window "1ns" 2026/03/19 01:09:52 INFO : S3 bucket rclone-test-gosepoj2befo: Bucket "rclone-test-gosepoj2befo" created with ACL "" both checkfile vs. NFCx2 remote (without normalization) 2026/03/19 01:09:53 ERROR : 測試_Русский___ě_áñ測試_Русский___ě_áñ: sum not found 2026/03/19 01:09:53 ERROR : 測試_Русский___ě_áñ測試_Русский___ě_áñ: file not in S3 bucket rclone-test-gosepoj2befo 2026/03/19 01:09:53 NOTICE: S3 bucket rclone-test-gosepoj2befo: 1 files missing 2026/03/19 01:09:53 NOTICE: 1 hashes missing 2026/03/19 01:09:53 NOTICE: S3 bucket rclone-test-gosepoj2befo: 1 differences found 2026/03/19 01:09:53 NOTICE: S3 bucket rclone-test-gosepoj2befo: 2 errors while checking both checkfile vs. NFCx2 remote (with normalization) 2026/03/19 01:09:53 DEBUG : 測試_Русский___ě_áñ測試_Русский___ě_áñ: md5 = 65a8e27d8879283831b664bd8b7f0ad4 OK 2026/03/19 01:09:53 NOTICE: S3 bucket rclone-test-gosepoj2befo: 0 differences found 2026/03/19 01:09:53 NOTICE: S3 bucket rclone-test-gosepoj2befo: 1 matching files 2026/03/19 01:09:53 DEBUG : S3 bucket rclone-test-gosepoj2befo: Purge remote 2026/03/19 01:09:53 DEBUG : S3 bucket rclone-test-gosepoj2befo: bucket is versioned: false 2026/03/19 01:09:53 DEBUG : Waiting for deletions to finish 2026/03/19 01:09:53 DEBUG : "測試_Русский___ě_áñ測試_Русский___ě_áñ" version false 2026/03/19 01:09:53 DEBUG : 測試_Русский___ě_áñ測試_Русский___ě_áñ: Deleting (id "") 2026/03/19 01:09:53 INFO : 測試_Русский___ě_áñ測試_Русский___ě_áñ: Deleted 2026/03/19 01:09:54 INFO : S3 bucket rclone-test-gosepoj2befo: Bucket "rclone-test-gosepoj2befo" deleted 2026/03/19 01:09:54 DEBUG : S3 bucket rclone-test-zebuqol3rexa: Purge remote 2026/03/19 01:09:54 DEBUG : S3 bucket rclone-test-zebuqol3rexa: bucket is versioned: false 2026/03/19 01:09:54 DEBUG : Waiting for deletions to finish 2026/03/19 01:09:55 DEBUG : "測試_Русский___ě_áñ測試_Русский___ě_áñ" version false 2026/03/19 01:09:55 DEBUG : 測試_Русский___ě_áñ測試_Русский___ě_áñ: Deleting (id "") 2026/03/19 01:09:55 INFO : 測試_Русский___ě_áñ測試_Русский___ě_áñ: Deleted 2026/03/19 01:09:55 INFO : S3 bucket rclone-test-zebuqol3rexa: Bucket "rclone-test-zebuqol3rexa" deleted 2026/03/19 01:09:55 DEBUG : S3 bucket rclone-test-guhiril4lala: Purge remote 2026/03/19 01:09:55 DEBUG : S3 bucket rclone-test-guhiril4lala: bucket is versioned: false 2026/03/19 01:09:55 DEBUG : Waiting for deletions to finish 2026/03/19 01:09:56 DEBUG : "測試_Русский___ě_áñ測試_Русский___ě_áñ" version false 2026/03/19 01:09:56 DEBUG : 測試_Русский___ě_áñ測試_Русский___ě_áñ: Deleting (id "") 2026/03/19 01:09:56 INFO : 測試_Русский___ě_áñ測試_Русский___ě_áñ: Deleted 2026/03/19 01:09:56 INFO : S3 bucket rclone-test-guhiril4lala: Bucket "rclone-test-guhiril4lala" deleted 2026/03/19 01:09:56 DEBUG : S3 bucket rclone-test-poqazun1wegu: Purge remote 2026/03/19 01:09:57 DEBUG : S3 bucket rclone-test-poqazun1wegu: bucket is versioned: false 2026/03/19 01:09:57 DEBUG : Waiting for deletions to finish 2026/03/19 01:09:57 DEBUG : "測試_Русский___ě_áñ測試_Русский___ě_áñ" version false 2026/03/19 01:09:57 DEBUG : 測試_Русский___ě_áñ測試_Русский___ě_áñ: Deleting (id "") 2026/03/19 01:09:57 INFO : 測試_Русский___ě_áñ測試_Русский___ě_áñ: Deleted 2026/03/19 01:09:58 INFO : S3 bucket rclone-test-poqazun1wegu: Bucket "rclone-test-poqazun1wegu" deleted 2026/03/19 01:09:58 DEBUG : S3 bucket rclone-test-cugefot2jemo: Purge remote 2026/03/19 01:09:58 DEBUG : S3 bucket rclone-test-cugefot2jemo: bucket is versioned: false 2026/03/19 01:09:58 DEBUG : Waiting for deletions to finish 2026/03/19 01:09:58 DEBUG : "測試_Русский___ě_áñ" version false 2026/03/19 01:09:58 DEBUG : 測試_Русский___ě_áñ: Deleting (id "") 2026/03/19 01:09:58 INFO : 測試_Русский___ě_áñ: Deleted 2026/03/19 01:09:59 INFO : S3 bucket rclone-test-cugefot2jemo: Bucket "rclone-test-cugefot2jemo" deleted 2026/03/19 01:09:59 DEBUG : S3 bucket rclone-test-poduzaf0foda: Purge remote 2026/03/19 01:09:59 DEBUG : S3 bucket rclone-test-poduzaf0foda: bucket is versioned: false 2026/03/19 01:09:59 DEBUG : Waiting for deletions to finish 2026/03/19 01:09:59 DEBUG : "測試_Русский___ě_áñ" version false 2026/03/19 01:09:59 DEBUG : 測試_Русский___ě_áñ: Deleting (id "") 2026/03/19 01:09:59 INFO : 測試_Русский___ě_áñ: Deleted 2026/03/19 01:10:00 INFO : S3 bucket rclone-test-poduzaf0foda: Bucket "rclone-test-poduzaf0foda" deleted 2026/03/19 01:10:00 DEBUG : S3 bucket rclone-test-kumuqud0kafu: Purge remote 2026/03/19 01:10:00 DEBUG : S3 bucket rclone-test-kumuqud0kafu: bucket is versioned: false 2026/03/19 01:10:00 DEBUG : Waiting for deletions to finish 2026/03/19 01:10:00 DEBUG : "HELLO, WORLD!" version false 2026/03/19 01:10:00 DEBUG : HELLO, WORLD!: Deleting (id "") 2026/03/19 01:10:01 INFO : HELLO, WORLD!: Deleted 2026/03/19 01:10:02 INFO : S3 bucket rclone-test-kumuqud0kafu: Bucket "rclone-test-kumuqud0kafu" deleted 2026/03/19 01:10:02 DEBUG : S3 bucket rclone-test-zanepiw0vogu: Purge remote 2026/03/19 01:10:02 DEBUG : S3 bucket rclone-test-zanepiw0vogu: bucket is versioned: false 2026/03/19 01:10:02 DEBUG : Waiting for deletions to finish 2026/03/19 01:10:02 DEBUG : "HeLlO, wOrLd!" version false 2026/03/19 01:10:02 DEBUG : HeLlO, wOrLd!: Deleting (id "") 2026/03/19 01:10:02 INFO : HeLlO, wOrLd!: Deleted 2026/03/19 01:10:02 INFO : S3 bucket rclone-test-zanepiw0vogu: Bucket "rclone-test-zanepiw0vogu" deleted 2026/03/19 01:10:02 DEBUG : S3 bucket rclone-test-xopogek8joze: Purge remote 2026/03/19 01:10:02 DEBUG : S3 bucket rclone-test-xopogek8joze: bucket is versioned: false 2026/03/19 01:10:02 DEBUG : Waiting for deletions to finish 2026/03/19 01:10:02 DEBUG : "HELLO, WORLD!" version false 2026/03/19 01:10:02 DEBUG : HELLO, WORLD!: Deleting (id "") 2026/03/19 01:10:02 INFO : HELLO, WORLD!: Deleted 2026/03/19 01:10:03 INFO : S3 bucket rclone-test-xopogek8joze: Bucket "rclone-test-xopogek8joze" deleted 2026/03/19 01:10:03 DEBUG : S3 bucket rclone-test-ropedeg6mapu: Purge remote 2026/03/19 01:10:03 DEBUG : S3 bucket rclone-test-ropedeg6mapu: bucket is versioned: false 2026/03/19 01:10:03 DEBUG : Waiting for deletions to finish 2026/03/19 01:10:03 DEBUG : "hello, world!" version false 2026/03/19 01:10:03 DEBUG : hello, world!: Deleting (id "") 2026/03/19 01:10:04 INFO : hello, world!: Deleted 2026/03/19 01:10:04 INFO : S3 bucket rclone-test-ropedeg6mapu: Bucket "rclone-test-ropedeg6mapu" deleted --- PASS: TestApplyTransforms (23.68s) === RUN TestTruncateString --- PASS: TestTruncateString (0.00s) === RUN TestCopyFile run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" 2026/03/19 01:10:04 DEBUG : file1: Need to transfer - File not found at Destination 2026/03/19 01:10:04 DEBUG : sub/file2: size = 14 OK 2026/03/19 01:10:04 DEBUG : file1: md5 = 0ef726ce9b1a7692357ff70dd321d595 OK 2026/03/19 01:10:04 INFO : file1: Copied (new) to: sub/file2 2026/03/19 01:10:05 DEBUG : sub/file2: size = 14 OK 2026/03/19 01:10:05 DEBUG : file1: Size and modification time the same (differ by 0s, within tolerance 1ns) 2026/03/19 01:10:05 DEBUG : file1: Unchanged skipping 2026/03/19 01:10:05 DEBUG : S3 bucket rclone-test-pivisat0jeto: don't need to copy/move sub/file2, it is already at target location --- PASS: TestCopyFile (0.84s) === RUN TestCopyLongFile run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" copy_test.go:154: Test only runs on local --- SKIP: TestCopyLongFile (0.11s) === RUN TestCopyFileBackupDir run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" 2026/03/19 01:10:05 DEBUG : Creating backend with remote "TestS3R2:rclone-test-pivisat0jeto/backup" 2026/03/19 01:10:06 DEBUG : dst/file1: size = 14 (Local file system at /tmp/rclone1014847034) 2026/03/19 01:10:06 DEBUG : dst/file1: size = 18 (S3 bucket rclone-test-pivisat0jeto) 2026/03/19 01:10:06 DEBUG : dst/file1: Sizes differ 2026/03/19 01:10:06 DEBUG : dst/file1: size = 18 OK 2026/03/19 01:10:06 DEBUG : dst/file1: md5 = 05164b153084ba910184c26e561a7c18 OK 2026/03/19 01:10:06 INFO : dst/file1: Copied (server-side copy) 2026/03/19 01:10:06 INFO : dst/file1: Deleted 2026/03/19 01:10:06 DEBUG : dst/file1: size = 14 OK 2026/03/19 01:10:06 DEBUG : dst/file1: md5 = 0ef726ce9b1a7692357ff70dd321d595 OK 2026/03/19 01:10:06 INFO : dst/file1: Copied (new) --- PASS: TestCopyFileBackupDir (1.84s) === RUN TestCopyFileCompareDest run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" 2026/03/19 01:10:07 DEBUG : Creating backend with remote "TestS3R2:rclone-test-pivisat0jeto/dst" 2026/03/19 01:10:07 DEBUG : Creating backend with remote "TestS3R2:rclone-test-pivisat0jeto/CompareDest" 2026/03/19 01:10:07 DEBUG : one: Need to transfer - File not found at Destination 2026/03/19 01:10:08 DEBUG : one: size = 3 OK 2026/03/19 01:10:08 DEBUG : one: md5 = f97c5d29941bfb1b2fdab0874906ab82 OK 2026/03/19 01:10:08 INFO : one: Copied (new) 2026/03/19 01:10:08 DEBUG : one: size = 5 (Local file system at /tmp/rclone1014847034) 2026/03/19 01:10:08 DEBUG : one: size = 3 (S3 bucket rclone-test-pivisat0jeto path dst) 2026/03/19 01:10:08 DEBUG : one: Sizes differ 2026/03/19 01:10:08 DEBUG : one: size = 5 OK 2026/03/19 01:10:08 DEBUG : one: md5 = 07912d142f5d63ee918b34796b5a2432 OK 2026/03/19 01:10:08 INFO : one: Copied (replaced existing) 2026/03/19 01:10:09 DEBUG : one: size = 5 (Local file system at /tmp/rclone1014847034) 2026/03/19 01:10:09 DEBUG : one: size = 3 (S3 bucket rclone-test-pivisat0jeto path dst) 2026/03/19 01:10:09 DEBUG : one: Sizes differ 2026/03/19 01:10:09 DEBUG : one: size = 5 OK 2026/03/19 01:10:09 DEBUG : one: Size and modification time the same (differ by 0s, within tolerance 1ns) 2026/03/19 01:10:09 DEBUG : one: Destination found in --compare-dest, skipping 2026/03/19 01:10:10 DEBUG : two: Need to transfer - File not found at Destination 2026/03/19 01:10:10 DEBUG : two: size = 3 OK 2026/03/19 01:10:10 DEBUG : two: Size and modification time the same (differ by 0s, within tolerance 1ns) 2026/03/19 01:10:10 DEBUG : two: Destination found in --compare-dest, skipping 2026/03/19 01:10:10 DEBUG : two: Need to transfer - File not found at Destination 2026/03/19 01:10:10 DEBUG : two: size = 3 OK 2026/03/19 01:10:10 DEBUG : two: Size and modification time the same (differ by 0s, within tolerance 1ns) 2026/03/19 01:10:10 DEBUG : two: Destination found in --compare-dest, skipping 2026/03/19 01:10:11 DEBUG : two: Need to transfer - File not found at Destination 2026/03/19 01:10:11 DEBUG : two: size = 5 (Local file system at /tmp/rclone1014847034) 2026/03/19 01:10:11 DEBUG : two: size = 3 (S3 bucket rclone-test-pivisat0jeto path CompareDest) 2026/03/19 01:10:11 DEBUG : two: Sizes differ 2026/03/19 01:10:11 DEBUG : two: size = 5 OK 2026/03/19 01:10:11 DEBUG : two: md5 = 2379e4ce8c3380e996ab0509f17069ad OK 2026/03/19 01:10:11 INFO : two: Copied (new) --- PASS: TestCopyFileCompareDest (4.85s) === RUN TestCopyFileCopyDest run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" 2026/03/19 01:10:12 DEBUG : Creating backend with remote "TestS3R2:rclone-test-pivisat0jeto/dst" 2026/03/19 01:10:12 DEBUG : Creating backend with remote "TestS3R2:rclone-test-pivisat0jeto/CopyDest" 2026/03/19 01:10:12 DEBUG : one: Need to transfer - File not found at Destination 2026/03/19 01:10:13 DEBUG : one: size = 3 OK 2026/03/19 01:10:13 DEBUG : one: md5 = f97c5d29941bfb1b2fdab0874906ab82 OK 2026/03/19 01:10:13 INFO : one: Copied (new) 2026/03/19 01:10:13 DEBUG : one: size = 5 (Local file system at /tmp/rclone1014847034) 2026/03/19 01:10:13 DEBUG : one: size = 3 (S3 bucket rclone-test-pivisat0jeto path dst) 2026/03/19 01:10:13 DEBUG : one: Sizes differ 2026/03/19 01:10:13 DEBUG : one: size = 5 OK 2026/03/19 01:10:13 DEBUG : one: md5 = 07912d142f5d63ee918b34796b5a2432 OK 2026/03/19 01:10:13 INFO : one: Copied (replaced existing) 2026/03/19 01:10:14 DEBUG : Creating backend with remote "TestS3R2:rclone-test-pivisat0jeto/BackupDir" 2026/03/19 01:10:14 DEBUG : one: size = 5 (Local file system at /tmp/rclone1014847034) 2026/03/19 01:10:14 DEBUG : one: size = 3 (S3 bucket rclone-test-pivisat0jeto path dst) 2026/03/19 01:10:14 DEBUG : one: Sizes differ 2026/03/19 01:10:14 DEBUG : one: size = 5 OK 2026/03/19 01:10:14 DEBUG : one: Size and modification time the same (differ by 0s, within tolerance 1ns) 2026/03/19 01:10:14 DEBUG : one: size = 5 (Local file system at /tmp/rclone1014847034) 2026/03/19 01:10:14 DEBUG : one: size = 3 (S3 bucket rclone-test-pivisat0jeto path dst) 2026/03/19 01:10:14 DEBUG : one: Sizes differ 2026/03/19 01:10:15 DEBUG : one: size = 3 OK 2026/03/19 01:10:15 DEBUG : one: md5 = f97c5d29941bfb1b2fdab0874906ab82 OK 2026/03/19 01:10:15 INFO : one: Copied (server-side copy) 2026/03/19 01:10:15 INFO : one: Deleted 2026/03/19 01:10:15 DEBUG : one: size = 5 OK 2026/03/19 01:10:15 DEBUG : one: md5 = 07912d142f5d63ee918b34796b5a2432 OK 2026/03/19 01:10:15 INFO : one: Copied (server-side copy) 2026/03/19 01:10:15 DEBUG : one: Destination found in --copy-dest, using server-side copy 2026/03/19 01:10:16 DEBUG : two: Need to transfer - File not found at Destination 2026/03/19 01:10:16 DEBUG : two: size = 3 OK 2026/03/19 01:10:16 DEBUG : two: Size and modification time the same (differ by 0s, within tolerance 1ns) 2026/03/19 01:10:16 DEBUG : two: size = 3 OK 2026/03/19 01:10:16 DEBUG : two: md5 = b8a9f715dbb64fd5c56e7783c6820a61 OK 2026/03/19 01:10:16 INFO : two: Copied (server-side copy) 2026/03/19 01:10:16 DEBUG : two: Destination found in --copy-dest, using server-side copy 2026/03/19 01:10:16 DEBUG : two: size = 3 OK 2026/03/19 01:10:16 DEBUG : two: Size and modification time the same (differ by 0s, within tolerance 1ns) 2026/03/19 01:10:16 DEBUG : two: Unchanged skipping 2026/03/19 01:10:17 DEBUG : three: Need to transfer - File not found at Destination 2026/03/19 01:10:17 DEBUG : three: size = 7 (Local file system at /tmp/rclone1014847034) 2026/03/19 01:10:17 DEBUG : three: size = 5 (S3 bucket rclone-test-pivisat0jeto path CopyDest) 2026/03/19 01:10:17 DEBUG : three: Sizes differ 2026/03/19 01:10:17 DEBUG : three: Destination not found in --copy-dest 2026/03/19 01:10:17 DEBUG : three: size = 7 OK 2026/03/19 01:10:17 DEBUG : three: md5 = 1bccb9dccb3e9f6a3f9d2a8bdb54b7f5 OK 2026/03/19 01:10:17 INFO : three: Copied (new) --- PASS: TestCopyFileCopyDest (6.90s) === RUN TestCopyInplace run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" copy_test.go:371: Partial uploads not supported --- SKIP: TestCopyInplace (0.10s) === RUN TestCopyLongFileName run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" copy_test.go:404: Partial uploads not supported --- SKIP: TestCopyLongFileName (0.10s) === RUN TestCopyLongFileNameCollision run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" copy_test.go:437: Partial uploads not supported --- SKIP: TestCopyLongFileNameCollision (0.10s) === RUN TestCopyFileMaxTransfer run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" 2026/03/19 01:10:19 DEBUG : TestCopyFileMaxTransfer/file1: Need to transfer - File not found at Destination 2026/03/19 01:10:19 DEBUG : TestCopyFileMaxTransfer/file1: size = 14 OK 2026/03/19 01:10:19 DEBUG : TestCopyFileMaxTransfer/file1: md5 = 0ef726ce9b1a7692357ff70dd321d595 OK 2026/03/19 01:10:19 INFO : TestCopyFileMaxTransfer/file1: Copied (new) 2026/03/19 01:10:19 DEBUG : TestCopyFileMaxTransfer/file2: Need to transfer - File not found at Destination 2026/03/19 01:10:19 ERROR : TestCopyFileMaxTransfer/file2: Failed to copy: operation error S3: PutObject, exceeded maximum number of attempts, 1, https response error StatusCode: 0, RequestID: , HostID: , request send failed, Put "https://14aad7c9ed489151b51557e321b246cf.r2.cloudflarestorage.com/rclone-test-pivisat0jeto/TestCopyFileMaxTransfer/file2?x-id=PutObject": max transfer limit reached as set by --max-transfer 2026/03/19 01:10:20 DEBUG : TestCopyFileMaxTransfer/file3: Need to transfer - File not found at Destination 2026/03/19 01:10:20 DEBUG : TestCopyFileMaxTransfer/file4: Need to transfer - File not found at Destination 2026/03/19 01:10:20 DEBUG : TestCopyFileMaxTransfer/file4: size = 2062 OK 2026/03/19 01:10:20 DEBUG : TestCopyFileMaxTransfer/file4: md5 = 5c05f55464b7191c618da4b87671e42e OK 2026/03/19 01:10:20 INFO : TestCopyFileMaxTransfer/file4: Copied (new) --- PASS: TestCopyFileMaxTransfer (1.48s) === RUN TestDeduplicateInteractive run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" dedupe_test.go:24: Can't test deduplicate - no duplicate files possible --- SKIP: TestDeduplicateInteractive (0.10s) === RUN TestDeduplicateSkip run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" dedupe_test.go:24: Can't test deduplicate - no duplicate files possible --- SKIP: TestDeduplicateSkip (0.10s) === RUN TestDeduplicateSizeOnly run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" dedupe_test.go:24: Can't test deduplicate - no duplicate files possible --- SKIP: TestDeduplicateSizeOnly (0.12s) === RUN TestDeduplicateFirst run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" dedupe_test.go:24: Can't test deduplicate - no duplicate files possible --- SKIP: TestDeduplicateFirst (0.10s) === RUN TestDeduplicateNewest run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" dedupe_test.go:24: Can't test deduplicate - no duplicate files possible --- SKIP: TestDeduplicateNewest (0.11s) === RUN TestDeduplicateNewestByHash run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" 2026/03/19 01:10:22 INFO : S3 bucket rclone-test-pivisat0jeto: Looking for duplicate md5 hashes using newest mode. 2026/03/19 01:10:22 NOTICE: e46cff1085e1e3b20921e4b8c40829a5: Found 3 files with duplicate md5 hashes 2026/03/19 01:10:23 INFO : one: Deleted 2026/03/19 01:10:23 INFO : also/one: Deleted 2026/03/19 01:10:23 NOTICE: e46cff1085e1e3b20921e4b8c40829a5: Deleted 2 extra copies --- PASS: TestDeduplicateNewestByHash (2.10s) === RUN TestDeduplicateOldest run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" dedupe_test.go:24: Can't test deduplicate - no duplicate files possible --- SKIP: TestDeduplicateOldest (0.12s) === RUN TestDeduplicateLargest run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" dedupe_test.go:24: Can't test deduplicate - no duplicate files possible --- SKIP: TestDeduplicateLargest (0.11s) === RUN TestDeduplicateSmallest run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" dedupe_test.go:24: Can't test deduplicate - no duplicate files possible --- SKIP: TestDeduplicateSmallest (0.10s) === RUN TestDeduplicateRename run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" dedupe_test.go:24: Can't test deduplicate - no duplicate files possible --- SKIP: TestDeduplicateRename (0.14s) === RUN TestMergeDirs run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" dedupe_test.go:256: Can't merge directories --- SKIP: TestMergeDirs (0.11s) === RUN TestListDirSorted run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" 2026/03/19 01:10:26 DEBUG : a.txt: Excluded (Size Filter) 2026/03/19 01:10:26 DEBUG : a.txt: Excluded 2026/03/19 01:10:26 DEBUG : sub dir/hello world2: Excluded (Size Filter) 2026/03/19 01:10:26 DEBUG : sub dir/hello world2: Excluded 2026/03/19 01:10:26 DEBUG : sub dir/hello world: Excluded (Size Filter) 2026/03/19 01:10:26 DEBUG : sub dir/hello world: Excluded 2026/03/19 01:10:26 DEBUG : sub dir/ignore dir: Excluded 2026/03/19 01:10:26 DEBUG : sub dir/hello world2: Excluded (Size Filter) 2026/03/19 01:10:26 DEBUG : sub dir/hello world2: Excluded 2026/03/19 01:10:26 DEBUG : sub dir/hello world: Excluded (Size Filter) 2026/03/19 01:10:26 DEBUG : sub dir/hello world: Excluded 2026/03/19 01:10:26 DEBUG : sub dir/ignore dir: Excluded --- PASS: TestListDirSorted (3.39s) === RUN TestListDirSortedFn run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" 2026/03/19 01:10:29 DEBUG : a.txt: Excluded (Size Filter) 2026/03/19 01:10:29 DEBUG : a.txt: Excluded 2026/03/19 01:10:29 DEBUG : sub dir/hello world2: Excluded (Size Filter) 2026/03/19 01:10:29 DEBUG : sub dir/hello world2: Excluded 2026/03/19 01:10:29 DEBUG : sub dir/hello world: Excluded (Size Filter) 2026/03/19 01:10:29 DEBUG : sub dir/hello world: Excluded 2026/03/19 01:10:30 DEBUG : sub dir/ignore dir: Excluded 2026/03/19 01:10:30 DEBUG : sub dir/hello world2: Excluded (Size Filter) 2026/03/19 01:10:30 DEBUG : sub dir/hello world2: Excluded 2026/03/19 01:10:30 DEBUG : sub dir/hello world: Excluded (Size Filter) 2026/03/19 01:10:30 DEBUG : sub dir/hello world: Excluded 2026/03/19 01:10:30 DEBUG : sub dir/ignore dir: Excluded --- PASS: TestListDirSortedFn (3.80s) === RUN TestListJSON run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" === RUN TestListJSON/Default === RUN TestListJSON/FilesOnly === RUN TestListJSON/DirsOnly === RUN TestListJSON/Recurse === RUN TestListJSON/SubDir === RUN TestListJSON/NoModTime === RUN TestListJSON/NoMimeType === RUN TestListJSON/ShowHash === RUN TestListJSON/HashTypes === RUN TestListJSON/Metadata --- PASS: TestListJSON (2.05s) --- PASS: TestListJSON/Default (0.10s) --- PASS: TestListJSON/FilesOnly (0.10s) --- PASS: TestListJSON/DirsOnly (0.06s) --- PASS: TestListJSON/Recurse (0.16s) --- PASS: TestListJSON/SubDir (0.13s) --- PASS: TestListJSON/NoModTime (0.12s) --- PASS: TestListJSON/NoMimeType (0.11s) --- PASS: TestListJSON/ShowHash (0.11s) --- PASS: TestListJSON/HashTypes (0.11s) --- PASS: TestListJSON/Metadata (0.11s) === RUN TestStatJSON run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" === RUN TestStatJSON/Root === RUN TestStatJSON/RootFilesOnly === RUN TestStatJSON/RootDirsOnly === RUN TestStatJSON/Dir === RUN TestStatJSON/DirWithTrailingSlash === RUN TestStatJSON/File === RUN TestStatJSON/NotFound === RUN TestStatJSON/DirFilesOnly === RUN TestStatJSON/FileFilesOnly === RUN TestStatJSON/NotFoundFilesOnly === RUN TestStatJSON/DirDirsOnly === RUN TestStatJSON/FileDirsOnly === RUN TestStatJSON/NotFoundDirsOnly === RUN TestStatJSON/RootNotFound 2026/03/19 01:10:34 DEBUG : Creating backend with remote "TestS3R2:rclone-test-pivisat0jeto/notfound" --- PASS: TestStatJSON (1.87s) --- PASS: TestStatJSON/Root (0.06s) --- PASS: TestStatJSON/RootFilesOnly (0.00s) --- PASS: TestStatJSON/RootDirsOnly (0.05s) --- PASS: TestStatJSON/Dir (0.12s) --- PASS: TestStatJSON/DirWithTrailingSlash (0.05s) --- PASS: TestStatJSON/File (0.05s) --- PASS: TestStatJSON/NotFound (0.11s) --- PASS: TestStatJSON/DirFilesOnly (0.05s) --- PASS: TestStatJSON/FileFilesOnly (0.06s) --- PASS: TestStatJSON/NotFoundFilesOnly (0.05s) --- PASS: TestStatJSON/DirDirsOnly (0.05s) --- PASS: TestStatJSON/FileDirsOnly (0.05s) --- PASS: TestStatJSON/NotFoundDirsOnly (0.05s) --- PASS: TestStatJSON/RootNotFound (0.15s) === RUN TestMkdir run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" 2026/03/19 01:10:35 INFO : S3 bucket rclone-test-pivisat0jeto: Making directory 2026/03/19 01:10:35 INFO : S3 bucket rclone-test-pivisat0jeto: Making directory --- PASS: TestMkdir (0.15s) === RUN TestLsd run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" --- PASS: TestLsd (0.53s) === RUN TestLs run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" --- PASS: TestLs (0.89s) === RUN TestLsWithFilesFrom run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" 2026/03/19 01:10:37 DEBUG : empty space: Excluded (FilesFrom Filter) --- PASS: TestLsWithFilesFrom (1.02s) === RUN TestLsLong run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" --- PASS: TestLsLong (1.00s) === RUN TestHashSums run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" === RUN TestHashSums/Md5 === RUN TestHashSums/Md5Download --- PASS: TestHashSums (1.05s) --- PASS: TestHashSums/Md5 (0.07s) --- PASS: TestHashSums/Md5Download (0.14s) === RUN TestHashSumsWithErrors 2026/03/19 01:10:39 DEBUG : Creating backend with remote ":memory:" 2026/03/19 01:10:39 ERROR : file1: hash unsupported: hash type not supported --- PASS: TestHashSumsWithErrors (0.00s) === RUN TestHashStream 2026/03/19 01:10:39 DEBUG : Creating md5 hash of 0 bytes read from input stream 2026/03/19 01:10:39 DEBUG : Creating md5 hash of 0 bytes read from input stream 2026/03/19 01:10:39 DEBUG : Creating sha1 hash of 0 bytes read from input stream 2026/03/19 01:10:39 DEBUG : Creating sha1 hash of 0 bytes read from input stream 2026/03/19 01:10:39 DEBUG : Creating md5 hash of 12 bytes read from input stream 2026/03/19 01:10:39 DEBUG : Creating md5 hash of 12 bytes read from input stream 2026/03/19 01:10:39 DEBUG : Creating sha1 hash of 12 bytes read from input stream 2026/03/19 01:10:39 DEBUG : Creating sha1 hash of 12 bytes read from input stream --- PASS: TestHashStream (0.00s) === RUN TestSuffixName --- PASS: TestSuffixName (0.00s) === RUN TestCount run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" --- PASS: TestCount (1.45s) === RUN TestDelete run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" 2026/03/19 01:10:42 DEBUG : Waiting for deletions to finish 2026/03/19 01:10:42 DEBUG : large: Excluded (Size Filter) 2026/03/19 01:10:42 INFO : medium: Deleted 2026/03/19 01:10:42 INFO : small: Deleted --- PASS: TestDelete (1.42s) === RUN TestMaxDelete run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" 2026/03/19 01:10:43 DEBUG : Waiting for deletions to finish 2026/03/19 01:10:43 ERROR : small: Got fatal error on delete: --max-delete threshold reached 2026/03/19 01:10:43 INFO : medium: Deleted 2026/03/19 01:10:43 INFO : large: Deleted --- PASS: TestMaxDelete (1.37s) === RUN TestMaxDeleteSizeLargeFile run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" 2026/03/19 01:10:44 DEBUG : Waiting for deletions to finish 2026/03/19 01:10:45 ERROR : large: Got fatal error on delete: --max-delete-size threshold reached 2026/03/19 01:10:45 INFO : small: Deleted 2026/03/19 01:10:45 INFO : medium: Deleted --- PASS: TestMaxDeleteSizeLargeFile (1.37s) === RUN TestMaxDeleteSize run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" 2026/03/19 01:10:46 DEBUG : Waiting for deletions to finish 2026/03/19 01:10:46 ERROR : small: Got fatal error on delete: --max-delete-size threshold reached 2026/03/19 01:10:46 INFO : medium: Deleted 2026/03/19 01:10:46 INFO : large: Deleted --- PASS: TestMaxDeleteSize (1.30s) === RUN TestReadFile run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" --- PASS: TestReadFile (0.71s) === RUN TestRetry 2026/03/19 01:10:47 DEBUG : Received error: Wrapped EOF is retriable: EOF - low level retry 1/5 2026/03/19 01:10:47 DEBUG : Received error: Wrapped EOF is retriable: EOF - low level retry 2/5 2026/03/19 01:10:47 DEBUG : Sleeping for 10ms (as indicated by the server) to obey Retry-After error: BANG: trying again in 10ms 2026/03/19 01:10:47 DEBUG : Sleeping for 10ms (as indicated by the server) to obey Retry-After error: BANG: trying again in 10ms 2026/03/19 01:10:47 DEBUG : Sleeping for 10ms (as indicated by the server) to obey Retry-After error: BANG: trying again in 10ms 2026/03/19 01:10:47 DEBUG : Sleeping for 10ms (as indicated by the server) to obey Retry-After error: BANG: trying again in 10ms 2026/03/19 01:10:47 DEBUG : Sleeping for 10ms (as indicated by the server) to obey Retry-After error: BANG: trying again in 10ms --- PASS: TestRetry (0.05s) === RUN TestCat run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" --- PASS: TestCat (1.74s) === RUN TestPurge 2026/03/19 01:10:49 DEBUG : Creating backend with remote "TestS3R2:rclone-test-muhiror4cudo" 2026/03/19 01:10:49 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2026/03/19 01:10:49 DEBUG : Creating backend with remote "/tmp/rclone1671249747" run.go:185: Remote "S3 bucket rclone-test-muhiror4cudo", Local "Local file system at /tmp/rclone1671249747", Modify Window "1ns" 2026/03/19 01:10:50 INFO : S3 bucket rclone-test-muhiror4cudo: Bucket "rclone-test-muhiror4cudo" created with ACL "" 2026/03/19 01:10:50 INFO : A2: Making directory 2026/03/19 01:10:50 INFO : A1/B2: Making directory 2026/03/19 01:10:50 INFO : A1/B2/C2: Making directory 2026/03/19 01:10:50 INFO : A1/B1/C3: Making directory 2026/03/19 01:10:50 INFO : A3: Making directory 2026/03/19 01:10:50 INFO : A3/B3: Making directory 2026/03/19 01:10:50 INFO : A3/B3/C4: Making directory fstest.go:250: Filtering empty directory "A2" fstest.go:250: Filtering empty directory "A1/B2" fstest.go:250: Filtering empty directory "A1/B2/C2" fstest.go:250: Filtering empty directory "A1/B1/C3" fstest.go:250: Filtering empty directory "A3" fstest.go:250: Filtering empty directory "A3/B3" fstest.go:250: Filtering empty directory "A3/B3/C4" 2026/03/19 01:10:50 DEBUG : S3 bucket rclone-test-muhiror4cudo: bucket is versioned: false 2026/03/19 01:10:50 DEBUG : Waiting for deletions to finish 2026/03/19 01:10:50 DEBUG : "A1/B1/C1/one" version false 2026/03/19 01:10:50 DEBUG : A1/B1/C1/one: Deleting (id "") 2026/03/19 01:10:50 INFO : A1/B1/C1/one: Deleted fstest.go:250: Filtering empty directory "A2" fstest.go:250: Filtering empty directory "A1/B2" fstest.go:250: Filtering empty directory "A1/B2/C2" fstest.go:250: Filtering empty directory "A3" fstest.go:250: Filtering empty directory "A3/B3" fstest.go:250: Filtering empty directory "A3/B3/C4" 2026/03/19 01:10:51 DEBUG : Waiting for deletions to finish 2026/03/19 01:10:51 DEBUG : "A1/two" version false 2026/03/19 01:10:51 DEBUG : A1/two: Deleting (id "") 2026/03/19 01:10:51 INFO : A1/two: Deleted 2026/03/19 01:10:51 INFO : S3 bucket rclone-test-muhiror4cudo: Bucket "rclone-test-muhiror4cudo" deleted 2026/03/19 01:10:51 DEBUG : S3 bucket rclone-test-muhiror4cudo: Purge remote 2026/03/19 01:10:51 DEBUG : Waiting for deletions to finish 2026/03/19 01:10:51 NOTICE: purge failed: directory not found --- PASS: TestPurge (2.40s) === RUN TestRmdirsNoLeaveRoot run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" 2026/03/19 01:10:51 INFO : A2: Making directory 2026/03/19 01:10:51 INFO : A1/B2: Making directory 2026/03/19 01:10:51 INFO : A1/B2/C2: Making directory 2026/03/19 01:10:51 INFO : A1/B1/C3: Making directory 2026/03/19 01:10:51 INFO : A3: Making directory 2026/03/19 01:10:51 INFO : A3/B3: Making directory 2026/03/19 01:10:51 INFO : A3/B3/C4: Making directory fstest.go:250: Filtering empty directory "A2" fstest.go:250: Filtering empty directory "A1/B2" fstest.go:250: Filtering empty directory "A1/B2/C2" fstest.go:250: Filtering empty directory "A1/B1/C3" fstest.go:250: Filtering empty directory "A3" fstest.go:250: Filtering empty directory "A3/B3" fstest.go:250: Filtering empty directory "A3/B3/C4" 2026/03/19 01:10:52 DEBUG : removing 1 level 3 directories 2026/03/19 01:10:52 INFO : A3/B3/C4: Removing directory fstest.go:250: Filtering empty directory "A2" fstest.go:250: Filtering empty directory "A1/B2" fstest.go:250: Filtering empty directory "A1/B2/C2" fstest.go:250: Filtering empty directory "A1/B1/C3" fstest.go:250: Filtering empty directory "A3" fstest.go:250: Filtering empty directory "A3/B3" 2026/03/19 01:10:53 DEBUG : removing 1 level 0 directories 2026/03/19 01:10:53 INFO : S3 bucket rclone-test-pivisat0jeto: Removing directory 2026/03/19 01:10:53 INFO : S3 bucket rclone-test-pivisat0jeto: Bucket "rclone-test-pivisat0jeto" deleted --- PASS: TestRmdirsNoLeaveRoot (2.36s) === RUN TestRmdirsLeaveRoot run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" 2026/03/19 01:10:54 INFO : S3 bucket rclone-test-pivisat0jeto: Bucket "rclone-test-pivisat0jeto" created with ACL "" 2026/03/19 01:10:54 INFO : A1: Making directory 2026/03/19 01:10:54 INFO : A1/B1: Making directory 2026/03/19 01:10:54 INFO : A1/B1/C1: Making directory fstest.go:250: Filtering empty directory "A1" fstest.go:250: Filtering empty directory "A1/B1" fstest.go:250: Filtering empty directory "A1/B1/C1" fstest.go:250: Filtering empty directory "A1" --- PASS: TestRmdirsLeaveRoot (0.61s) === RUN TestRmdirsWithFilter run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" 2026/03/19 01:10:54 INFO : A1: Making directory 2026/03/19 01:10:54 INFO : A1/B1: Making directory 2026/03/19 01:10:54 INFO : A1/B1/C1: Making directory fstest.go:250: Filtering empty directory "A1" fstest.go:250: Filtering empty directory "A1/B1" fstest.go:250: Filtering empty directory "A1/B1/C1" fstest.go:250: Filtering empty directory "A1" --- PASS: TestRmdirsWithFilter (0.34s) === RUN TestCopyURL run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" 2026/03/19 01:10:55 ERROR : file1: Post request put error: operation error S3: PutObject, serialization failed: internal error: Seek not implemented for io.nopCloser operations_test.go:843: Error Trace: /home/rclone/go/src/github.com/rclone/rclone/fs/operations/operations_test.go:843 Error: Received unexpected error: operation error S3: PutObject, serialization failed: internal error: Seek not implemented for io.nopCloser Test: TestCopyURL --- FAIL: TestCopyURL (0.17s) === RUN TestCopyURLDownloadHeaders run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" 2026/03/19 01:10:55 ERROR : file1: Post request put error: operation error S3: PutObject, serialization failed: internal error: Seek not implemented for io.nopCloser operations_test.go:915: Error Trace: /home/rclone/go/src/github.com/rclone/rclone/fs/operations/operations_test.go:915 Error: Received unexpected error: operation error S3: PutObject, serialization failed: internal error: Seek not implemented for io.nopCloser Test: TestCopyURLDownloadHeaders --- FAIL: TestCopyURLDownloadHeaders (0.12s) === RUN TestCopyURLToWriter --- PASS: TestCopyURLToWriter (0.00s) === RUN TestMoveFile run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" 2026/03/19 01:10:55 DEBUG : file1: Need to transfer - File not found at Destination 2026/03/19 01:10:55 DEBUG : sub/file2: size = 14 OK 2026/03/19 01:10:55 DEBUG : file1: md5 = 0ef726ce9b1a7692357ff70dd321d595 OK 2026/03/19 01:10:55 INFO : file1: Copied (new) to: sub/file2 2026/03/19 01:10:55 INFO : file1: Deleted 2026/03/19 01:10:55 DEBUG : sub/file2: size = 14 OK 2026/03/19 01:10:55 DEBUG : file1: Size and modification time the same (differ by 0s, within tolerance 1ns) 2026/03/19 01:10:55 DEBUG : file1: Unchanged skipping 2026/03/19 01:10:55 INFO : file1: Deleted 2026/03/19 01:10:55 DEBUG : S3 bucket rclone-test-pivisat0jeto: don't need to copy/move sub/file2, it is already at target location --- PASS: TestMoveFile (0.89s) === RUN TestMoveFileWithIgnoreExisting run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" 2026/03/19 01:10:56 DEBUG : file1: Need to transfer - File not found at Destination 2026/03/19 01:10:56 ERROR : file1: Failed to copy: operation error S3: PutObject, https response error StatusCode: 409, RequestID: , HostID: , api error NotImplemented: Bucket recreated during request lifetime. Please try your request again. 2026/03/19 01:10:56 ERROR : file1: Not deleting source as copy failed: operation error S3: PutObject, https response error StatusCode: 409, RequestID: , HostID: , api error NotImplemented: Bucket recreated during request lifetime. Please try your request again. operations_test.go:991: Error Trace: /home/rclone/go/src/github.com/rclone/rclone/fs/operations/operations_test.go:991 Error: Received unexpected error: operation error S3: PutObject, https response error StatusCode: 409, RequestID: , HostID: , api error NotImplemented: Bucket recreated during request lifetime. Please try your request again. Test: TestMoveFileWithIgnoreExisting --- FAIL: TestMoveFileWithIgnoreExisting (0.32s) === RUN TestCaseInsensitiveMoveFile run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" --- PASS: TestCaseInsensitiveMoveFile (0.11s) === RUN TestCaseInsensitiveMoveFileDryRun run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" --- PASS: TestCaseInsensitiveMoveFileDryRun (0.11s) === RUN TestMoveFileBackupDir run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" 2026/03/19 01:10:57 DEBUG : Creating backend with remote "TestS3R2:rclone-test-pivisat0jeto/backup" 2026/03/19 01:10:57 DEBUG : dst/file1: size = 14 (Local file system at /tmp/rclone1014847034) 2026/03/19 01:10:57 DEBUG : dst/file1: size = 18 (S3 bucket rclone-test-pivisat0jeto) 2026/03/19 01:10:57 DEBUG : dst/file1: Sizes differ 2026/03/19 01:10:57 DEBUG : dst/file1: size = 18 OK 2026/03/19 01:10:57 DEBUG : dst/file1: md5 = 05164b153084ba910184c26e561a7c18 OK 2026/03/19 01:10:57 INFO : dst/file1: Copied (server-side copy) 2026/03/19 01:10:57 INFO : dst/file1: Deleted 2026/03/19 01:10:57 ERROR : dst/file1: Failed to copy: operation error S3: PutObject, https response error StatusCode: 409, RequestID: , HostID: , api error NotImplemented: Bucket recreated during request lifetime. Please try your request again. 2026/03/19 01:10:57 ERROR : dst/file1: Not deleting source as copy failed: operation error S3: PutObject, https response error StatusCode: 409, RequestID: , HostID: , api error NotImplemented: Bucket recreated during request lifetime. Please try your request again. operations_test.go:1075: Error Trace: /home/rclone/go/src/github.com/rclone/rclone/fs/operations/operations_test.go:1075 Error: Received unexpected error: operation error S3: PutObject, https response error StatusCode: 409, RequestID: , HostID: , api error NotImplemented: Bucket recreated during request lifetime. Please try your request again. Test: TestMoveFileBackupDir --- FAIL: TestMoveFileBackupDir (1.36s) === RUN TestSameConfig --- PASS: TestSameConfig (0.00s) === RUN TestSame --- PASS: TestSame (0.00s) === RUN TestOverlappingFilterCheckWithoutFilter --- PASS: TestOverlappingFilterCheckWithoutFilter (0.00s) === RUN TestOverlappingFilterCheckWithFilter --- PASS: TestOverlappingFilterCheckWithFilter (0.00s) === RUN TestListFormat --- PASS: TestListFormat (0.00s) === RUN TestDirMove run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" 2026/03/19 01:10:59 INFO : A1/B2: Making directory 2026/03/19 01:10:59 INFO : A1/B1/C3: Making directory fstest.go:250: Filtering empty directory "A1/B2" fstest.go:250: Filtering empty directory "A1/B1/C3" 2026/03/19 01:10:59 DEBUG : A2/B1/C2/five: size = 4 OK 2026/03/19 01:10:59 DEBUG : A1/B1/C2/five: md5 = 30056e1cab7a61d256fc8edd970d14f5 OK 2026/03/19 01:10:59 INFO : A1/B1/C2/five: Copied (server-side copy) to: A2/B1/C2/five 2026/03/19 01:10:59 DEBUG : A2/two: size = 3 OK 2026/03/19 01:10:59 DEBUG : A1/two: md5 = b8a9f715dbb64fd5c56e7783c6820a61 OK 2026/03/19 01:10:59 INFO : A1/two: Copied (server-side copy) to: A2/two 2026/03/19 01:10:59 INFO : A1/B1/C2/five: Deleted 2026/03/19 01:10:59 DEBUG : A2/B1/three: size = 5 OK 2026/03/19 01:10:59 DEBUG : A1/B1/three: md5 = 35d6d33467aae9a2e3dccb4b6b027878 OK 2026/03/19 01:10:59 INFO : A1/B1/three: Copied (server-side copy) to: A2/B1/three 2026/03/19 01:10:59 DEBUG : A2/one: size = 3 OK 2026/03/19 01:10:59 DEBUG : A1/one: md5 = f97c5d29941bfb1b2fdab0874906ab82 OK 2026/03/19 01:10:59 INFO : A1/one: Copied (server-side copy) to: A2/one 2026/03/19 01:11:00 INFO : A1/two: Deleted 2026/03/19 01:11:00 INFO : A1/one: Deleted 2026/03/19 01:11:00 INFO : A1/B1/three: Deleted 2026/03/19 01:11:00 DEBUG : A2/B1/C1/four: size = 4 OK 2026/03/19 01:11:00 DEBUG : A1/B1/C1/four: md5 = 8cbad96aced40b3838dd9f07f6ef5772 OK 2026/03/19 01:11:00 INFO : A1/B1/C1/four: Copied (server-side copy) to: A2/B1/C1/four 2026/03/19 01:11:00 INFO : A1/B1/C1/four: Deleted fstest.go:250: Filtering empty directory "A2/B2" fstest.go:250: Filtering empty directory "A2/B1/C3" 2026/03/19 01:11:01 DEBUG : A3/B1/C1/four: size = 4 OK 2026/03/19 01:11:01 DEBUG : A2/B1/C1/four: md5 = 8cbad96aced40b3838dd9f07f6ef5772 OK 2026/03/19 01:11:01 INFO : A2/B1/C1/four: Copied (server-side copy) to: A3/B1/C1/four 2026/03/19 01:11:01 DEBUG : A3/one: size = 3 OK 2026/03/19 01:11:01 DEBUG : A2/one: md5 = f97c5d29941bfb1b2fdab0874906ab82 OK 2026/03/19 01:11:01 INFO : A2/one: Copied (server-side copy) to: A3/one 2026/03/19 01:11:01 DEBUG : A3/B1/three: size = 5 OK 2026/03/19 01:11:01 DEBUG : A2/B1/three: md5 = 35d6d33467aae9a2e3dccb4b6b027878 OK 2026/03/19 01:11:01 INFO : A2/B1/three: Copied (server-side copy) to: A3/B1/three 2026/03/19 01:11:01 DEBUG : A3/two: size = 3 OK 2026/03/19 01:11:01 DEBUG : A2/two: md5 = b8a9f715dbb64fd5c56e7783c6820a61 OK 2026/03/19 01:11:01 INFO : A2/two: Copied (server-side copy) to: A3/two 2026/03/19 01:11:01 INFO : A2/B1/C1/four: Deleted 2026/03/19 01:11:01 INFO : A2/B1/three: Deleted 2026/03/19 01:11:01 INFO : A2/one: Deleted 2026/03/19 01:11:01 INFO : A2/two: Deleted 2026/03/19 01:11:01 DEBUG : A3/B1/C2/five: size = 4 OK 2026/03/19 01:11:01 DEBUG : A2/B1/C2/five: md5 = 30056e1cab7a61d256fc8edd970d14f5 OK 2026/03/19 01:11:01 INFO : A2/B1/C2/five: Copied (server-side copy) to: A3/B1/C2/five 2026/03/19 01:11:01 INFO : A2/B1/C2/five: Deleted fstest.go:250: Filtering empty directory "A3/B2" fstest.go:250: Filtering empty directory "A3/B1/C3" 2026/03/19 01:11:02 INFO : S3 bucket rclone-test-pivisat0jeto: Can't DirMove - falling back to file moves: can't move directory - incompatible remotes 2026/03/19 01:11:02 DEBUG : A4/B1/three: size = 5 OK 2026/03/19 01:11:02 DEBUG : A3/B1/three: md5 = 35d6d33467aae9a2e3dccb4b6b027878 OK 2026/03/19 01:11:02 INFO : A3/B1/three: Copied (server-side copy) to: A4/B1/three 2026/03/19 01:11:02 DEBUG : A4/one: size = 3 OK 2026/03/19 01:11:02 DEBUG : A3/one: md5 = f97c5d29941bfb1b2fdab0874906ab82 OK 2026/03/19 01:11:02 INFO : A3/one: Copied (server-side copy) to: A4/one 2026/03/19 01:11:02 DEBUG : A4/two: size = 3 OK 2026/03/19 01:11:02 DEBUG : A3/two: md5 = b8a9f715dbb64fd5c56e7783c6820a61 OK 2026/03/19 01:11:02 INFO : A3/two: Copied (server-side copy) to: A4/two 2026/03/19 01:11:02 DEBUG : A4/B1/C1/four: size = 4 OK 2026/03/19 01:11:02 DEBUG : A3/B1/C1/four: md5 = 8cbad96aced40b3838dd9f07f6ef5772 OK 2026/03/19 01:11:02 INFO : A3/B1/C1/four: Copied (server-side copy) to: A4/B1/C1/four 2026/03/19 01:11:02 DEBUG : A4/B1/C2/five: size = 4 OK 2026/03/19 01:11:02 DEBUG : A3/B1/C2/five: md5 = 30056e1cab7a61d256fc8edd970d14f5 OK 2026/03/19 01:11:02 INFO : A3/B1/C2/five: Copied (server-side copy) to: A4/B1/C2/five 2026/03/19 01:11:02 INFO : A3/B1/three: Deleted 2026/03/19 01:11:02 INFO : A3/one: Deleted 2026/03/19 01:11:02 INFO : A3/two: Deleted 2026/03/19 01:11:02 INFO : A3/B1/C2/five: Deleted 2026/03/19 01:11:02 INFO : A3/B1/C1/four: Deleted fstest.go:250: Filtering empty directory "A4/B2" fstest.go:250: Filtering empty directory "A4/B1/C3" --- PASS: TestDirMove (5.43s) === RUN TestGetFsInfo run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" --- PASS: TestGetFsInfo (0.11s) === RUN TestRcat === RUN TestRcat/withChecksum=false,ignoreChecksum=false run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" 2026/03/19 01:11:03 DEBUG : S3 bucket rclone-test-pivisat0jeto: File to upload is small (34 bytes), uploading instead of streaming 2026/03/19 01:11:03 DEBUG : no_checksum_small_file_from_pipe: size = 34 OK 2026/03/19 01:11:03 DEBUG : no_checksum_small_file_from_pipe: md5 = 4c762bc6ec18f21b23fcae426c7863b5 OK 2026/03/19 01:11:03 DEBUG : no_checksum_small_file_from_pipe: Size and md5 of src and dst objects identical 2026/03/19 01:11:03 NOTICE: S3 bucket rclone-test-pivisat0jeto: Streaming uploads using chunk size 5Mi will have maximum file size of 48.828Gi 2026/03/19 01:11:04 DEBUG : no_checksum_big_file_from_pipe: open chunk writer: started multipart upload: AMNqe5VJ5O0Ax--Oql8Qsuik6PLq6vJkL2bfD2H6vtxwSmJBfEdgcPX59amyDQUV2kjtuKw9DlBWr2ccqbvfLa44P3ftF7cGy52sJ03VLkMsihRqXtMlp15IExav1ugEc6Mq3Mr-SWEHoXyWDtqQKInp7B4_mpt-vVp6mNBYAvGDe2pAVWlsmjR4kfi9SnwQidJtVsLbbCHC0K-d5nYXd3ymBTQTnAaC89lXfsytTrv5WjxlUpxB3WWNDmoTBB--_z7WbmEQDkwihL7ocBXxXZOxe0TJoX6q69dVvl9xspG_ivhK1kF6ANpGEG6BKg2RPHme7dRZs8L1E8DSWkH3ieU 2026/03/19 01:11:04 DEBUG : no_checksum_big_file_from_pipe: multipart upload: starting chunk 0 size 100.001Ki offset 0/off 2026/03/19 01:11:04 DEBUG : no_checksum_big_file_from_pipe: multipart upload wrote chunk 1 with 102401 bytes and etag "fffc7956ba9a7b58a63c01b6ce1ddc45" 2026/03/19 01:11:04 DEBUG : no_checksum_big_file_from_pipe: multipart upload "AMNqe5VJ5O0Ax--Oql8Qsuik6PLq6vJkL2bfD2H6vtxwSmJBfEdgcPX59amyDQUV2kjtuKw9DlBWr2ccqbvfLa44P3ftF7cGy52sJ03VLkMsihRqXtMlp15IExav1ugEc6Mq3Mr-SWEHoXyWDtqQKInp7B4_mpt-vVp6mNBYAvGDe2pAVWlsmjR4kfi9SnwQidJtVsLbbCHC0K-d5nYXd3ymBTQTnAaC89lXfsytTrv5WjxlUpxB3WWNDmoTBB--_z7WbmEQDkwihL7ocBXxXZOxe0TJoX6q69dVvl9xspG_ivhK1kF6ANpGEG6BKg2RPHme7dRZs8L1E8DSWkH3ieU" finished 2026/03/19 01:11:04 DEBUG : no_checksum_big_file_from_pipe: size = 102401 OK 2026/03/19 01:11:04 DEBUG : no_checksum_big_file_from_pipe: Dst hash empty - aborting Src hash check 2026/03/19 01:11:04 DEBUG : no_checksum_big_file_from_pipe: Size of src and dst objects identical === RUN TestRcat/withChecksum=true,ignoreChecksum=false run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" 2026/03/19 01:11:04 DEBUG : S3 bucket rclone-test-pivisat0jeto: File to upload is small (34 bytes), uploading instead of streaming 2026/03/19 01:11:05 DEBUG : with_checksum_small_file_from_pipe: size = 34 OK 2026/03/19 01:11:05 DEBUG : with_checksum_small_file_from_pipe: md5 = 4c762bc6ec18f21b23fcae426c7863b5 OK 2026/03/19 01:11:05 DEBUG : with_checksum_small_file_from_pipe: Size and md5 of src and dst objects identical 2026/03/19 01:11:05 DEBUG : with_checksum_big_file_from_pipe: open chunk writer: started multipart upload: AAhRAP7BZ022fy0gVqmV1Hb1TSvhYvVt78kCtwcroukicumRkxiezTd397SOdg7adjEDsZ2XPuTyhSyoqO9WzawwY2-nhSrEgFcplRTXroPZPGWI2XZEnhY00zufL0a0GbnsjR89ZcsmcbI6UA5p1xGyk_DfcTdkCYuCFB6UK_X60fk-Ax1jTSO1iSoyEhH8a_lTw7qG8jAWS1NNYZdCg_iypDBkPR5i7JOnjvEPIacc4-xrQKcUPhxcuOsXttGrsXKIQXx597_Idglx69pNx3a-5t1k9D6ZUW5yYJwXGAwyQ4byFj6JJT3TPaKuPoZvCL6K3b-9Ryy7bL5kDUtU_E0 2026/03/19 01:11:05 DEBUG : with_checksum_big_file_from_pipe: multipart upload: starting chunk 0 size 100.001Ki offset 0/off 2026/03/19 01:11:05 DEBUG : with_checksum_big_file_from_pipe: multipart upload wrote chunk 1 with 102401 bytes and etag "fffc7956ba9a7b58a63c01b6ce1ddc45" 2026/03/19 01:11:05 DEBUG : with_checksum_big_file_from_pipe: multipart upload "AAhRAP7BZ022fy0gVqmV1Hb1TSvhYvVt78kCtwcroukicumRkxiezTd397SOdg7adjEDsZ2XPuTyhSyoqO9WzawwY2-nhSrEgFcplRTXroPZPGWI2XZEnhY00zufL0a0GbnsjR89ZcsmcbI6UA5p1xGyk_DfcTdkCYuCFB6UK_X60fk-Ax1jTSO1iSoyEhH8a_lTw7qG8jAWS1NNYZdCg_iypDBkPR5i7JOnjvEPIacc4-xrQKcUPhxcuOsXttGrsXKIQXx597_Idglx69pNx3a-5t1k9D6ZUW5yYJwXGAwyQ4byFj6JJT3TPaKuPoZvCL6K3b-9Ryy7bL5kDUtU_E0" finished 2026/03/19 01:11:05 DEBUG : with_checksum_big_file_from_pipe: size = 102401 OK 2026/03/19 01:11:05 DEBUG : with_checksum_big_file_from_pipe: Dst hash empty - aborting Src hash check 2026/03/19 01:11:05 DEBUG : with_checksum_big_file_from_pipe: Size of src and dst objects identical === RUN TestRcat/withChecksum=false,ignoreChecksum=true run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" 2026/03/19 01:11:06 DEBUG : S3 bucket rclone-test-pivisat0jeto: File to upload is small (34 bytes), uploading instead of streaming 2026/03/19 01:11:06 DEBUG : ignore_checksum_small_file_from_pipe: size = 34 OK 2026/03/19 01:11:06 DEBUG : ignore_checksum_small_file_from_pipe: Size and modification time the same (differ by 0s, within tolerance 1ns) 2026/03/19 01:11:06 DEBUG : ignore_checksum_big_file_from_pipe: open chunk writer: started multipart upload: AATZcOQYnaRIDgINGmq2_Vd225mub2knbor6Vb80uGdDu5Pc52v9Xa74lVbwm6DZMdPgjyfjeeFYummQC2kvJ8mJECroQ-Qdf1td4r4xCoLGuDRm6lXOcf-0Z8GSFgnhgVZaRTUVZvbco8pam-5Ymc_bInSYI3tt1_4TXXddz2ybIJx8-ast52InOwdXRjAhGVczycnlw5EMg3sgOcGShGKAFdNuoTejyhtYuTOp7MgoM77cSyWkXIK42ALElt9qMHuWgTKG9K1nQylhEe6n2DaCmGr9tDH_8W_byfCAmOliZITpESPVCraAtnGNVerwQjcvm940HbYuyYsOdf0SnV8 2026/03/19 01:11:06 DEBUG : ignore_checksum_big_file_from_pipe: multipart upload: starting chunk 0 size 100.001Ki offset 0/off 2026/03/19 01:11:06 DEBUG : ignore_checksum_big_file_from_pipe: multipart upload wrote chunk 1 with 102401 bytes and etag "fffc7956ba9a7b58a63c01b6ce1ddc45" 2026/03/19 01:11:06 DEBUG : ignore_checksum_big_file_from_pipe: multipart upload "AATZcOQYnaRIDgINGmq2_Vd225mub2knbor6Vb80uGdDu5Pc52v9Xa74lVbwm6DZMdPgjyfjeeFYummQC2kvJ8mJECroQ-Qdf1td4r4xCoLGuDRm6lXOcf-0Z8GSFgnhgVZaRTUVZvbco8pam-5Ymc_bInSYI3tt1_4TXXddz2ybIJx8-ast52InOwdXRjAhGVczycnlw5EMg3sgOcGShGKAFdNuoTejyhtYuTOp7MgoM77cSyWkXIK42ALElt9qMHuWgTKG9K1nQylhEe6n2DaCmGr9tDH_8W_byfCAmOliZITpESPVCraAtnGNVerwQjcvm940HbYuyYsOdf0SnV8" finished 2026/03/19 01:11:06 DEBUG : ignore_checksum_big_file_from_pipe: size = 102401 OK 2026/03/19 01:11:06 DEBUG : ignore_checksum_big_file_from_pipe: Size and modification time the same (differ by 0s, within tolerance 1ns) === RUN TestRcat/withChecksum=true,ignoreChecksum=true run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" 2026/03/19 01:11:07 DEBUG : S3 bucket rclone-test-pivisat0jeto: File to upload is small (34 bytes), uploading instead of streaming 2026/03/19 01:11:07 DEBUG : ignore_checksum_small_file_from_pipe: size = 34 OK 2026/03/19 01:11:07 DEBUG : ignore_checksum_small_file_from_pipe: Src hash empty - aborting Dst hash check 2026/03/19 01:11:07 DEBUG : ignore_checksum_small_file_from_pipe: Size of src and dst objects identical 2026/03/19 01:11:07 DEBUG : ignore_checksum_big_file_from_pipe: open chunk writer: started multipart upload: ABon13Yb_D46zrdvSuTswHwrXoPNHd2H0mamJLF7qMLsIsNvHzMhINEX_TlGbjcJ9VxaYvIeMQbcWhFAdfyzfEVM91Dg8qlhnfHEZynSjasI9i75ig1imB-if3lh-hTMJJhVNjgjibDmX0_tj-iezoUkhdQI-V86XfcgQDQ8CkDV8lBiG8u61yV4GrWzkYTn5z4cDZYdPFYve6yOT_sVYAGVv9GzZpuF_NyEJhUzx4mO0FmAN_zYR78J2rVwnvQfbvz-uEfIPE7nrL-EjELaKaKV8IRF0-RPNdD8jCDkHg5jGj4BzJRUFTHXFqw0dufKfUA5vWavkaCsDNmHIMDk9W0 2026/03/19 01:11:07 DEBUG : ignore_checksum_big_file_from_pipe: multipart upload: starting chunk 0 size 100.001Ki offset 0/off 2026/03/19 01:11:08 DEBUG : ignore_checksum_big_file_from_pipe: multipart upload wrote chunk 1 with 102401 bytes and etag "fffc7956ba9a7b58a63c01b6ce1ddc45" 2026/03/19 01:11:08 DEBUG : ignore_checksum_big_file_from_pipe: multipart upload "ABon13Yb_D46zrdvSuTswHwrXoPNHd2H0mamJLF7qMLsIsNvHzMhINEX_TlGbjcJ9VxaYvIeMQbcWhFAdfyzfEVM91Dg8qlhnfHEZynSjasI9i75ig1imB-if3lh-hTMJJhVNjgjibDmX0_tj-iezoUkhdQI-V86XfcgQDQ8CkDV8lBiG8u61yV4GrWzkYTn5z4cDZYdPFYve6yOT_sVYAGVv9GzZpuF_NyEJhUzx4mO0FmAN_zYR78J2rVwnvQfbvz-uEfIPE7nrL-EjELaKaKV8IRF0-RPNdD8jCDkHg5jGj4BzJRUFTHXFqw0dufKfUA5vWavkaCsDNmHIMDk9W0" finished 2026/03/19 01:11:08 DEBUG : ignore_checksum_big_file_from_pipe: size = 102401 OK 2026/03/19 01:11:08 DEBUG : ignore_checksum_big_file_from_pipe: Dst hash empty - aborting Src hash check 2026/03/19 01:11:08 DEBUG : ignore_checksum_big_file_from_pipe: Src hash empty - aborting Dst hash check 2026/03/19 01:11:08 DEBUG : ignore_checksum_big_file_from_pipe: Size of src and dst objects identical --- PASS: TestRcat (5.06s) --- PASS: TestRcat/withChecksum=false,ignoreChecksum=false (1.19s) --- PASS: TestRcat/withChecksum=true,ignoreChecksum=false (1.40s) --- PASS: TestRcat/withChecksum=false,ignoreChecksum=true (1.16s) --- PASS: TestRcat/withChecksum=true,ignoreChecksum=true (1.31s) === RUN TestRcatMetadata run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" === RUN TestRcatMetadata/Normal 2026/03/19 01:11:08 DEBUG : S3 bucket rclone-test-pivisat0jeto: File to upload is small (48 bytes), uploading instead of streaming 2026/03/19 01:11:09 DEBUG : rcat_metadata: size = 48 OK 2026/03/19 01:11:09 DEBUG : rcat_metadata: md5 = dee10c33b9fe5e2ac4eb8ad8467b7063 OK 2026/03/19 01:11:09 DEBUG : rcat_metadata: Size and md5 of src and dst objects identical === RUN TestRcatMetadata/ViaDisk 2026/03/19 01:11:09 DEBUG : rcat_metadata_uploadcutoff0: open chunk writer: started multipart upload: ADJAbj5NfWF5MV_BXfAr5MmnpJlGmYTmWxfLt0Ua4OfzVkdEQTgrBqqVnUdmDApq18jC4DAbweuIxVh8EuDkZRlvooJAuAuwfxdzTO1PxvN7s2znJdHxvdAgh1IjhYwgmnxY_tMPFJvQb7uwHK3P6edGbIq9a450VZBSNRBCYWqzh95c5sotuZUSBLY2CCeoKaLtJ71IY5W0cWr7v0OY_4C-ly7cpyVWuFwSAzHw_h6LR7KFd_S1ojw03KQTWl8SV2TcuGY0zlO706-m-th08DAO87j00M51wEWKfEVgX0IEwNrcDqT-HpLfDEd2GQMbwtiUZsOHhkLbYDHZH7orptU 2026/03/19 01:11:09 DEBUG : rcat_metadata_uploadcutoff0: multipart upload: starting chunk 0 size 63 offset 0/off 2026/03/19 01:11:09 DEBUG : rcat_metadata_uploadcutoff0: multipart upload wrote chunk 1 with 63 bytes and etag "51ca8560f35b9b87370a65d72356b86c" 2026/03/19 01:11:09 DEBUG : rcat_metadata_uploadcutoff0: multipart upload "ADJAbj5NfWF5MV_BXfAr5MmnpJlGmYTmWxfLt0Ua4OfzVkdEQTgrBqqVnUdmDApq18jC4DAbweuIxVh8EuDkZRlvooJAuAuwfxdzTO1PxvN7s2znJdHxvdAgh1IjhYwgmnxY_tMPFJvQb7uwHK3P6edGbIq9a450VZBSNRBCYWqzh95c5sotuZUSBLY2CCeoKaLtJ71IY5W0cWr7v0OY_4C-ly7cpyVWuFwSAzHw_h6LR7KFd_S1ojw03KQTWl8SV2TcuGY0zlO706-m-th08DAO87j00M51wEWKfEVgX0IEwNrcDqT-HpLfDEd2GQMbwtiUZsOHhkLbYDHZH7orptU" finished 2026/03/19 01:11:09 DEBUG : rcat_metadata_uploadcutoff0: size = 63 OK 2026/03/19 01:11:09 DEBUG : rcat_metadata_uploadcutoff0: Dst hash empty - aborting Src hash check 2026/03/19 01:11:09 DEBUG : rcat_metadata_uploadcutoff0: Size of src and dst objects identical --- PASS: TestRcatMetadata (1.62s) --- PASS: TestRcatMetadata/Normal (0.62s) --- PASS: TestRcatMetadata/ViaDisk (0.89s) === RUN TestRcatSize run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" 2026/03/19 01:11:10 ERROR : potato1: Post request put error: operation error S3: PutObject, serialization failed: internal error: Seek not implemented for io.nopCloserWriterTo operations_test.go:1624: Error Trace: /home/rclone/go/src/github.com/rclone/rclone/fs/operations/operations_test.go:1624 Error: Received unexpected error: operation error S3: PutObject, serialization failed: internal error: Seek not implemented for io.nopCloserWriterTo Test: TestRcatSize --- FAIL: TestRcatSize (0.15s) === RUN TestRcatSizeMetadata run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" 2026/03/19 01:11:10 ERROR : potato1: Post request put error: operation error S3: PutObject, serialization failed: internal error: Seek not implemented for io.nopCloserWriterTo operations_test.go:1663: Error Trace: /home/rclone/go/src/github.com/rclone/rclone/fs/operations/operations_test.go:1663 Error: Received unexpected error: operation error S3: PutObject, serialization failed: internal error: Seek not implemented for io.nopCloserWriterTo Test: TestRcatSizeMetadata --- FAIL: TestRcatSizeMetadata (0.12s) === RUN TestRcatSizeUploadHeaders run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" 2026/03/19 01:11:10 ERROR : potato1: Don't know how to set key "X-Upload-Header" on upload 2026/03/19 01:11:10 ERROR : potato1: Post request put error: operation error S3: PutObject, serialization failed: internal error: Seek not implemented for io.nopCloserWriterTo operations_test.go:1714: Error Trace: /home/rclone/go/src/github.com/rclone/rclone/fs/operations/operations_test.go:1714 Error: Received unexpected error: operation error S3: PutObject, serialization failed: internal error: Seek not implemented for io.nopCloserWriterTo Test: TestRcatSizeUploadHeaders --- FAIL: TestRcatSizeUploadHeaders (0.11s) === RUN TestTouchDir run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" 2026/03/19 01:11:11 DEBUG : S3 bucket rclone-test-pivisat0jeto: Touching "sub dir/potato3" 2026/03/19 01:11:11 DEBUG : S3 bucket rclone-test-pivisat0jeto: Touching "empty space" 2026/03/19 01:11:11 DEBUG : S3 bucket rclone-test-pivisat0jeto: Touching "potato2" --- PASS: TestTouchDir (2.17s) === RUN TestMkdirMetadata run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" operations_test.go:1773: Skipping test as remote does not support MkdirMetadata --- SKIP: TestMkdirMetadata (0.13s) === RUN TestMkdirModTime run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" operations_test.go:1792: Skipping test as remote does not support DirSetModTime or MkdirMetadata --- SKIP: TestMkdirModTime (0.16s) === RUN TestCopyDirMetadata run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" operations_test.go:1813: Skipping test as remote does not support WriteDirMetadata or MkdirMetadata --- SKIP: TestCopyDirMetadata (0.15s) === RUN TestSetDirModTime run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" operations_test.go:1849: Skipping test as remote does not support DirSetModTime or WriteDirSetModTime --- SKIP: TestSetDirModTime (0.15s) === RUN TestDirsEqual run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" operations_test.go:1893: Skipping test as remote does not support WriteDirMetadata or MkdirMetadata --- SKIP: TestDirsEqual (0.15s) === RUN TestRemoveExisting run.go:185: Remote "S3 bucket rclone-test-pivisat0jeto", Local "Local file system at /tmp/rclone1014847034", Modify Window "1ns" operations_test.go:1962: Skipping as remote can't Move --- SKIP: TestRemoveExisting (0.15s) === RUN TestRcAbout rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcAbout (0.00s) === RUN TestRcCleanup rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcCleanup (0.00s) === RUN TestRcCopyfile rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcCopyfile (0.00s) === RUN TestRcCopyurl rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcCopyurl (0.00s) === RUN TestRcDelete rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcDelete (0.00s) === RUN TestRcDeletefile rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcDeletefile (0.00s) === RUN TestRcList rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcList (0.00s) === RUN TestRcStat rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcStat (0.00s) === RUN TestRcSetTier rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcSetTier (0.00s) === RUN TestRcSetTierFile rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcSetTierFile (0.00s) === RUN TestRcMkdir rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcMkdir (0.00s) === RUN TestRcMovefile rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcMovefile (0.00s) === RUN TestRcPurge rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcPurge (0.00s) === RUN TestRcRmdir rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcRmdir (0.00s) === RUN TestRcRmdirs rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcRmdirs (0.00s) === RUN TestRcSize rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcSize (0.00s) === RUN TestRcPublicLink rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcPublicLink (0.00s) === RUN TestRcFsInfo rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcFsInfo (0.00s) === RUN TestUploadFile rc_test.go:30: Skipping test on non local remote --- SKIP: TestUploadFile (0.00s) === RUN TestRcCommand rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcCommand (0.00s) === RUN TestRcDu rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcDu (0.00s) === RUN TestRcCheck rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcCheck (0.00s) === RUN TestRcHashsum rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcHashsum (0.00s) === RUN TestRcHashsumSingleFile rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcHashsumSingleFile (0.00s) === RUN TestRcHashsumFile rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcHashsumFile (0.00s) FAIL 2026/03/19 01:11:13 DEBUG : S3 bucket rclone-test-pivisat0jeto: Purge remote 2026/03/19 01:11:13 DEBUG : S3 bucket rclone-test-pivisat0jeto: bucket is versioned: false 2026/03/19 01:11:13 DEBUG : Waiting for deletions to finish 2026/03/19 01:11:14 INFO : S3 bucket rclone-test-pivisat0jeto: Bucket "rclone-test-pivisat0jeto" deleted "./operations.test -test.v -test.timeout 1h0m0s -remote TestS3R2: -verbose -fast-list" - Finished ERROR in 2m21.084800513s (try 1/5): exit status 1: Failed [TestCopyURL TestCopyURLDownloadHeaders TestMoveFileWithIgnoreExisting TestMoveFileBackupDir TestRcatSize TestRcatSizeMetadata TestRcatSizeUploadHeaders]