"./operations.test -test.v -test.timeout 1h0m0s -remote TestS3: -verbose" - Starting (try 1/5) 2025/12/10 02:22:48 DEBUG : Creating backend with remote "TestS3:rclone-test-yenapon2tigo" 2025/12/10 02:22:48 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2025/12/10 02:22:48 DEBUG : Creating backend with remote "/tmp/rclone4119116075" === RUN TestDoMultiThreadCopy --- PASS: TestDoMultiThreadCopy (0.00s) === RUN TestMultithreadCalculateNumChunks === RUN TestMultithreadCalculateNumChunks/{size:1_chunkSize:65536_wantNumChunks:1} === RUN TestMultithreadCalculateNumChunks/{size:1048576_chunkSize:1_wantNumChunks:1048576} === RUN TestMultithreadCalculateNumChunks/{size:1048576_chunkSize:2_wantNumChunks:524288} === RUN TestMultithreadCalculateNumChunks/{size:1048577_chunkSize:2_wantNumChunks:524289} === RUN TestMultithreadCalculateNumChunks/{size:1048575_chunkSize:2_wantNumChunks:524288} --- PASS: TestMultithreadCalculateNumChunks (0.00s) --- PASS: TestMultithreadCalculateNumChunks/{size:1_chunkSize:65536_wantNumChunks:1} (0.00s) --- PASS: TestMultithreadCalculateNumChunks/{size:1048576_chunkSize:1_wantNumChunks:1048576} (0.00s) --- PASS: TestMultithreadCalculateNumChunks/{size:1048576_chunkSize:2_wantNumChunks:524288} (0.00s) --- PASS: TestMultithreadCalculateNumChunks/{size:1048577_chunkSize:2_wantNumChunks:524289} (0.00s) --- PASS: TestMultithreadCalculateNumChunks/{size:1048575_chunkSize:2_wantNumChunks:524288} (0.00s) === RUN TestMultithreadCopy run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" 2025/12/10 02:22:49 INFO : S3 bucket rclone-test-yenapon2tigo: Bucket "rclone-test-yenapon2tigo" created with ACL "" 2025/12/10 02:22:49 DEBUG : chunksize-probe: open chunk writer: started multipart upload: bXL7u4Ni2.1XwPxFyKNRhsta.KYk3Hey6CVXWfbrf9Kx4w2D1J04CbBbDhjkmjO.SIAy_dQJjE3oaA80IV4FQFwsmgod7ns_z8amrAOfYGMrxl5rXrDM3MGxkEqoPRt4 2025/12/10 02:22:49 DEBUG : chunksize-probe: multipart upload "bXL7u4Ni2.1XwPxFyKNRhsta.KYk3Hey6CVXWfbrf9Kx4w2D1J04CbBbDhjkmjO.SIAy_dQJjE3oaA80IV4FQFwsmgod7ns_z8amrAOfYGMrxl5rXrDM3MGxkEqoPRt4" aborted === RUN TestMultithreadCopy/upload=false,size=10485759,streams=2 2025/12/10 02:22:50 DEBUG : test-multithread-copy-false-10485759-2: multi-thread copy: disabling buffering because destination uses OpenWriterAt 2025/12/10 02:22:50 DEBUG : test-multithread-copy-false-10485759-2: multi-thread copy: write buffer set to 131072 2025/12/10 02:22:50 DEBUG : test-multithread-copy-false-10485759-2: multi-thread copy: chunk size 64Mi was bigger than source file size 10.000Mi 2025/12/10 02:22:50 DEBUG : test-multithread-copy-false-10485759-2: multi-thread copy: using backend concurrency of 4 instead of --multi-thread-streams 2 2025/12/10 02:22:50 DEBUG : test-multithread-copy-false-10485759-2: multi-thread copy: number of streams 4 was bigger than number of chunks 1 2025/12/10 02:22:50 DEBUG : test-multithread-copy-false-10485759-2: Starting multi-thread copy with 1 chunks of size 10.000Mi with 1 parallel streams 2025/12/10 02:22:50 DEBUG : test-multithread-copy-false-10485759-2: multi-thread copy: chunk 1/1 (0-10485759) size 10.000Mi starting 2025/12/10 02:22:50 DEBUG : test-multithread-copy-false-10485759-2: writing chunk 0 2025/12/10 02:22:50 DEBUG : test-multithread-copy-false-10485759-2: multi-thread copy: chunk 1/1 (0-10485759) size 10.000Mi finished 2025/12/10 02:22:50 DEBUG : test-multithread-copy-false-10485759-2: Finished multi-thread copy with 1 parts of size 10.000Mi === RUN TestMultithreadCopy/upload=false,size=10485760,streams=2 2025/12/10 02:22:52 DEBUG : test-multithread-copy-false-10485760-2: multi-thread copy: disabling buffering because destination uses OpenWriterAt 2025/12/10 02:22:52 DEBUG : test-multithread-copy-false-10485760-2: multi-thread copy: write buffer set to 131072 2025/12/10 02:22:52 DEBUG : test-multithread-copy-false-10485760-2: multi-thread copy: chunk size 64Mi was bigger than source file size 10Mi 2025/12/10 02:22:52 DEBUG : test-multithread-copy-false-10485760-2: multi-thread copy: using backend concurrency of 4 instead of --multi-thread-streams 2 2025/12/10 02:22:52 DEBUG : test-multithread-copy-false-10485760-2: multi-thread copy: number of streams 4 was bigger than number of chunks 1 2025/12/10 02:22:52 DEBUG : test-multithread-copy-false-10485760-2: Starting multi-thread copy with 1 chunks of size 10Mi with 1 parallel streams 2025/12/10 02:22:52 DEBUG : test-multithread-copy-false-10485760-2: multi-thread copy: chunk 1/1 (0-10485760) size 10Mi starting 2025/12/10 02:22:52 DEBUG : test-multithread-copy-false-10485760-2: writing chunk 0 2025/12/10 02:22:52 DEBUG : test-multithread-copy-false-10485760-2: multi-thread copy: chunk 1/1 (0-10485760) size 10Mi finished 2025/12/10 02:22:52 DEBUG : test-multithread-copy-false-10485760-2: Finished multi-thread copy with 1 parts of size 10Mi === RUN TestMultithreadCopy/upload=false,size=10485761,streams=2 2025/12/10 02:22:54 DEBUG : test-multithread-copy-false-10485761-2: multi-thread copy: disabling buffering because destination uses OpenWriterAt 2025/12/10 02:22:54 DEBUG : test-multithread-copy-false-10485761-2: multi-thread copy: write buffer set to 131072 2025/12/10 02:22:54 DEBUG : test-multithread-copy-false-10485761-2: multi-thread copy: chunk size 64Mi was bigger than source file size 10.000Mi 2025/12/10 02:22:54 DEBUG : test-multithread-copy-false-10485761-2: multi-thread copy: using backend concurrency of 4 instead of --multi-thread-streams 2 2025/12/10 02:22:54 DEBUG : test-multithread-copy-false-10485761-2: multi-thread copy: number of streams 4 was bigger than number of chunks 1 2025/12/10 02:22:54 DEBUG : test-multithread-copy-false-10485761-2: Starting multi-thread copy with 1 chunks of size 10.000Mi with 1 parallel streams 2025/12/10 02:22:54 DEBUG : test-multithread-copy-false-10485761-2: multi-thread copy: chunk 1/1 (0-10485761) size 10.000Mi starting 2025/12/10 02:22:54 DEBUG : test-multithread-copy-false-10485761-2: writing chunk 0 2025/12/10 02:22:54 DEBUG : test-multithread-copy-false-10485761-2: multi-thread copy: chunk 1/1 (0-10485761) size 10.000Mi finished 2025/12/10 02:22:54 DEBUG : test-multithread-copy-false-10485761-2: Finished multi-thread copy with 1 parts of size 10.000Mi === RUN TestMultithreadCopy/upload=true,size=10485759,streams=2 2025/12/10 02:22:56 DEBUG : test-multithread-copy-true-10485759-2: multi-thread copy: disabling buffering because source is local disk 2025/12/10 02:22:56 DEBUG : test-multithread-copy-true-10485759-2: open chunk writer: started multipart upload: zQJRw4WYvpkwc0S6qHkQd_usgVZlGuEstqQ8I5fnDRtJj7vGSb8LRWOKLWOSJUQjKo4uuFtLnmo.dG.MklqJ2pV8jm3yO_CuXdmo6BjaCeziIOfSc5NFuTSgzaAgf8KE 2025/12/10 02:22:56 DEBUG : test-multithread-copy-true-10485759-2: multi-thread copy: using backend concurrency of 4 instead of --multi-thread-streams 2 2025/12/10 02:22:56 DEBUG : test-multithread-copy-true-10485759-2: multi-thread copy: number of streams 4 was bigger than number of chunks 2 2025/12/10 02:22:56 DEBUG : test-multithread-copy-true-10485759-2: Starting multi-thread copy with 2 chunks of size 5Mi with 2 parallel streams 2025/12/10 02:22:56 DEBUG : test-multithread-copy-true-10485759-2: multi-thread copy: chunk 2/2 (5242880-10485759) size 5.000Mi starting 2025/12/10 02:22:56 DEBUG : test-multithread-copy-true-10485759-2: multi-thread copy: chunk 1/2 (0-5242880) size 5Mi starting 2025/12/10 02:22:56 DEBUG : test-multithread-copy-true-10485759-2: Seek from 5242880 to 0 2025/12/10 02:22:56 DEBUG : test-multithread-copy-true-10485759-2: Seek from 5242879 to 0 2025/12/10 02:22:56 DEBUG : test-multithread-copy-true-10485759-2: multipart upload wrote chunk 1 with 5242880 bytes and etag "984359f1dd1c7fd717bc7a84225f59bd" 2025/12/10 02:22:56 DEBUG : test-multithread-copy-true-10485759-2: multi-thread copy: chunk 1/2 (0-5242880) size 5Mi finished 2025/12/10 02:22:56 DEBUG : test-multithread-copy-true-10485759-2: multipart upload wrote chunk 2 with 5242879 bytes and etag "47ac963af5b70a3541b0a73422ce6b5c" 2025/12/10 02:22:56 DEBUG : test-multithread-copy-true-10485759-2: multi-thread copy: chunk 2/2 (5242880-10485759) size 5.000Mi finished 2025/12/10 02:22:56 DEBUG : test-multithread-copy-true-10485759-2: multipart upload "zQJRw4WYvpkwc0S6qHkQd_usgVZlGuEstqQ8I5fnDRtJj7vGSb8LRWOKLWOSJUQjKo4uuFtLnmo.dG.MklqJ2pV8jm3yO_CuXdmo6BjaCeziIOfSc5NFuTSgzaAgf8KE" finished 2025/12/10 02:22:56 DEBUG : test-multithread-copy-true-10485759-2: Finished multi-thread copy with 2 parts of size 5Mi === RUN TestMultithreadCopy/upload=true,size=10485760,streams=2 2025/12/10 02:22:58 DEBUG : test-multithread-copy-true-10485760-2: multi-thread copy: disabling buffering because source is local disk 2025/12/10 02:22:58 DEBUG : test-multithread-copy-true-10485760-2: open chunk writer: started multipart upload: 5nGLD9hcK0xGnj8fa8jsRPjTWJR.Rf3.RDB5pdLsUDTwCIXDCDT3aysml35RIiCYodx.03Zypp_6oEoaHki.jRWm0bH17tTpPEdZloeRRIUZZFOF1urflebR9__LIctH 2025/12/10 02:22:58 DEBUG : test-multithread-copy-true-10485760-2: multi-thread copy: using backend concurrency of 4 instead of --multi-thread-streams 2 2025/12/10 02:22:58 DEBUG : test-multithread-copy-true-10485760-2: multi-thread copy: number of streams 4 was bigger than number of chunks 2 2025/12/10 02:22:58 DEBUG : test-multithread-copy-true-10485760-2: Starting multi-thread copy with 2 chunks of size 5Mi with 2 parallel streams 2025/12/10 02:22:58 DEBUG : test-multithread-copy-true-10485760-2: multi-thread copy: chunk 2/2 (5242880-10485760) size 5Mi starting 2025/12/10 02:22:58 DEBUG : test-multithread-copy-true-10485760-2: multi-thread copy: chunk 1/2 (0-5242880) size 5Mi starting 2025/12/10 02:22:58 DEBUG : test-multithread-copy-true-10485760-2: Seek from 5242880 to 0 2025/12/10 02:22:58 DEBUG : test-multithread-copy-true-10485760-2: Seek from 5242880 to 0 2025/12/10 02:22:59 DEBUG : test-multithread-copy-true-10485760-2: multipart upload wrote chunk 2 with 5242880 bytes and etag "0e6a90667802462f3932facaea849378" 2025/12/10 02:22:59 DEBUG : test-multithread-copy-true-10485760-2: multi-thread copy: chunk 2/2 (5242880-10485760) size 5Mi finished 2025/12/10 02:22:59 DEBUG : test-multithread-copy-true-10485760-2: multipart upload wrote chunk 1 with 5242880 bytes and etag "2754e95ff063f1388bb6abac85e44328" 2025/12/10 02:22:59 DEBUG : test-multithread-copy-true-10485760-2: multi-thread copy: chunk 1/2 (0-5242880) size 5Mi finished 2025/12/10 02:22:59 DEBUG : test-multithread-copy-true-10485760-2: multipart upload "5nGLD9hcK0xGnj8fa8jsRPjTWJR.Rf3.RDB5pdLsUDTwCIXDCDT3aysml35RIiCYodx.03Zypp_6oEoaHki.jRWm0bH17tTpPEdZloeRRIUZZFOF1urflebR9__LIctH" finished 2025/12/10 02:22:59 DEBUG : test-multithread-copy-true-10485760-2: Finished multi-thread copy with 2 parts of size 5Mi === RUN TestMultithreadCopy/upload=true,size=10485761,streams=2 2025/12/10 02:23:00 DEBUG : test-multithread-copy-true-10485761-2: multi-thread copy: disabling buffering because source is local disk 2025/12/10 02:23:01 DEBUG : test-multithread-copy-true-10485761-2: open chunk writer: started multipart upload: 4chsAaiwEERegbX.A72QTr3APWkVF6qXgikL5dUW4mxqkczB8VppOfGz2SHsqWo.lAwemlRYF5jgVpexL.LtbCaUnP_StAv97Tc.D1L.BuiDkXNDASXLi5tzlBzDnukw 2025/12/10 02:23:01 DEBUG : test-multithread-copy-true-10485761-2: multi-thread copy: using backend concurrency of 4 instead of --multi-thread-streams 2 2025/12/10 02:23:01 DEBUG : test-multithread-copy-true-10485761-2: multi-thread copy: number of streams 4 was bigger than number of chunks 3 2025/12/10 02:23:01 DEBUG : test-multithread-copy-true-10485761-2: Starting multi-thread copy with 3 chunks of size 5Mi with 3 parallel streams 2025/12/10 02:23:01 DEBUG : test-multithread-copy-true-10485761-2: multi-thread copy: chunk 3/3 (10485760-10485761) size 1 starting 2025/12/10 02:23:01 DEBUG : test-multithread-copy-true-10485761-2: multi-thread copy: chunk 1/3 (0-5242880) size 5Mi starting 2025/12/10 02:23:01 DEBUG : test-multithread-copy-true-10485761-2: Seek from 1 to 0 2025/12/10 02:23:01 DEBUG : test-multithread-copy-true-10485761-2: multi-thread copy: chunk 2/3 (5242880-10485760) size 5Mi starting 2025/12/10 02:23:01 DEBUG : test-multithread-copy-true-10485761-2: Seek from 5242880 to 0 2025/12/10 02:23:01 DEBUG : test-multithread-copy-true-10485761-2: multipart upload wrote chunk 3 with 1 bytes and etag "03c7c0ace395d80182db07ae2c30f034" 2025/12/10 02:23:01 DEBUG : test-multithread-copy-true-10485761-2: multi-thread copy: chunk 3/3 (10485760-10485761) size 1 finished 2025/12/10 02:23:01 DEBUG : test-multithread-copy-true-10485761-2: Seek from 5242880 to 0 2025/12/10 02:23:01 DEBUG : test-multithread-copy-true-10485761-2: multipart upload wrote chunk 1 with 5242880 bytes and etag "85d6ddf00f2b9c5d48e8c8e4d3ac0b09" 2025/12/10 02:23:01 DEBUG : test-multithread-copy-true-10485761-2: multi-thread copy: chunk 1/3 (0-5242880) size 5Mi finished 2025/12/10 02:23:01 DEBUG : test-multithread-copy-true-10485761-2: multipart upload wrote chunk 2 with 5242880 bytes and etag "3fe0340380f5ab634cd00d39d3a15588" 2025/12/10 02:23:01 DEBUG : test-multithread-copy-true-10485761-2: multi-thread copy: chunk 2/3 (5242880-10485760) size 5Mi finished 2025/12/10 02:23:01 DEBUG : test-multithread-copy-true-10485761-2: multipart upload "4chsAaiwEERegbX.A72QTr3APWkVF6qXgikL5dUW4mxqkczB8VppOfGz2SHsqWo.lAwemlRYF5jgVpexL.LtbCaUnP_StAv97Tc.D1L.BuiDkXNDASXLi5tzlBzDnukw" finished 2025/12/10 02:23:01 DEBUG : test-multithread-copy-true-10485761-2: Finished multi-thread copy with 3 parts of size 5Mi --- PASS: TestMultithreadCopy (13.90s) --- PASS: TestMultithreadCopy/upload=false,size=10485759,streams=2 (2.29s) --- PASS: TestMultithreadCopy/upload=false,size=10485760,streams=2 (1.76s) --- PASS: TestMultithreadCopy/upload=false,size=10485761,streams=2 (1.79s) --- PASS: TestMultithreadCopy/upload=true,size=10485759,streams=2 (2.50s) --- PASS: TestMultithreadCopy/upload=true,size=10485760,streams=2 (2.40s) --- PASS: TestMultithreadCopy/upload=true,size=10485761,streams=2 (2.18s) === RUN TestMultithreadCopyAbort run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" 2025/12/10 02:23:02 DEBUG : chunksize-probe: open chunk writer: started multipart upload: AeIiyXdWnG_gICa6Z1Zt0Qn1JM5mpWRLLfIpej93U3zdMfozvls9QAWUZIPcRWuC137b6HR48lpvpTj5OBiRxVbOWhCfeE4FUczhd03Wn.LRBK3hhuOdT0P.UkSBXnfD 2025/12/10 02:23:02 DEBUG : chunksize-probe: multipart upload "AeIiyXdWnG_gICa6Z1Zt0Qn1JM5mpWRLLfIpej93U3zdMfozvls9QAWUZIPcRWuC137b6HR48lpvpTj5OBiRxVbOWhCfeE4FUczhd03Wn.LRBK3hhuOdT0P.UkSBXnfD" aborted 2025/12/10 02:23:03 DEBUG : test-multithread-abort: multi-thread copy: disabling buffering because source is local disk 2025/12/10 02:23:03 DEBUG : test-multithread-abort: open chunk writer: started multipart upload: 47wUQ83TcRQEh.XJ7IBBFiPj3GJSlTYAohva4.GoWL1iSiSdEhdIJlqMT1cznJ_uB4eA_GJuBlpkqdDcDo83AZEVVhLNQfE8PCuRxgRfG9Qx2K.mAQGXt0Z9RecSLxV0 2025/12/10 02:23:03 DEBUG : test-multithread-abort: multi-thread copy: using backend concurrency of 4 instead of --multi-thread-streams 1 2025/12/10 02:23:03 DEBUG : test-multithread-abort: multi-thread copy: number of streams 4 was bigger than number of chunks 3 2025/12/10 02:23:03 DEBUG : test-multithread-abort: Starting multi-thread copy with 3 chunks of size 5Mi with 3 parallel streams 2025/12/10 02:23:03 DEBUG : test-multithread-abort: multi-thread copy: chunk 3/3 (10485760-10485761) size 1 starting 2025/12/10 02:23:03 DEBUG : Open with options = [RangeOption(10485760,10485760)] 2025/12/10 02:23:03 DEBUG : test-multithread-abort: multi-thread copy: chunk 2/3 (5242880-10485760) size 5Mi starting 2025/12/10 02:23:03 DEBUG : Open with options = [RangeOption(5242880,10485759)] 2025/12/10 02:23:03 DEBUG : test-multithread-abort: multi-thread copy: chunk 1/3 (0-5242880) size 5Mi starting 2025/12/10 02:23:03 DEBUG : Open with options = [RangeOption(0,5242879)] 2025/12/10 02:23:03 DEBUG : test-multithread-abort: Seek from 5242880 to 0 2025/12/10 02:23:03 DEBUG : Open with options = [RangeOption(5242880,10485759)] 2025/12/10 02:23:03 DEBUG : test-multithread-abort: Seek from 5242880 to 0 2025/12/10 02:23:03 DEBUG : Open with options = [RangeOption(0,5242879)] 2025/12/10 02:23:04 DEBUG : test-multithread-abort: multipart upload wrote chunk 2 with 5242880 bytes and etag "05a673634105eaec29465c5ceb7a1b85" 2025/12/10 02:23:04 DEBUG : test-multithread-abort: multi-thread copy: chunk 2/3 (5242880-10485760) size 5Mi finished 2025/12/10 02:23:04 DEBUG : test-multithread-abort: multipart upload wrote chunk 1 with 5242880 bytes and etag "f28df008514def3fb4eb9fe6cd9659cc" 2025/12/10 02:23:04 DEBUG : test-multithread-abort: multi-thread copy: chunk 1/3 (0-5242880) size 5Mi finished 2025/12/10 02:23:04 DEBUG : Returning error reader 2025/12/10 02:23:04 DEBUG : BOOM: simulated read failure 2025/12/10 02:23:04 DEBUG : test-multithread-abort: Reopening on read failure after offset 0 bytes: retry 1/10: BOOM: simulated read failure 2025/12/10 02:23:04 DEBUG : Open with options = [RangeOption(10485760,10485760)] 2025/12/10 02:23:05 DEBUG : Returning error reader 2025/12/10 02:23:05 DEBUG : BOOM: simulated read failure 2025/12/10 02:23:05 DEBUG : test-multithread-abort: Reopening on read failure after offset 0 bytes: retry 2/10: BOOM: simulated read failure 2025/12/10 02:23:05 DEBUG : Open with options = [RangeOption(10485760,10485760)] 2025/12/10 02:23:06 DEBUG : Returning error reader 2025/12/10 02:23:06 DEBUG : BOOM: simulated read failure 2025/12/10 02:23:06 DEBUG : test-multithread-abort: Reopening on read failure after offset 0 bytes: retry 3/10: BOOM: simulated read failure 2025/12/10 02:23:06 DEBUG : Open with options = [RangeOption(10485760,10485760)] 2025/12/10 02:23:07 DEBUG : Returning error reader 2025/12/10 02:23:07 DEBUG : BOOM: simulated read failure 2025/12/10 02:23:07 DEBUG : test-multithread-abort: Reopening on read failure after offset 0 bytes: retry 4/10: BOOM: simulated read failure 2025/12/10 02:23:07 DEBUG : Open with options = [RangeOption(10485760,10485760)] 2025/12/10 02:23:08 DEBUG : Returning error reader 2025/12/10 02:23:08 DEBUG : BOOM: simulated read failure 2025/12/10 02:23:08 DEBUG : test-multithread-abort: Reopening on read failure after offset 0 bytes: retry 5/10: BOOM: simulated read failure 2025/12/10 02:23:08 DEBUG : Open with options = [RangeOption(10485760,10485760)] 2025/12/10 02:23:09 DEBUG : Returning error reader 2025/12/10 02:23:09 DEBUG : BOOM: simulated read failure 2025/12/10 02:23:09 DEBUG : test-multithread-abort: Reopening on read failure after offset 0 bytes: retry 6/10: BOOM: simulated read failure 2025/12/10 02:23:09 DEBUG : Open with options = [RangeOption(10485760,10485760)] 2025/12/10 02:23:10 DEBUG : Returning error reader 2025/12/10 02:23:10 DEBUG : BOOM: simulated read failure 2025/12/10 02:23:10 DEBUG : test-multithread-abort: Reopening on read failure after offset 0 bytes: retry 7/10: BOOM: simulated read failure 2025/12/10 02:23:10 DEBUG : Open with options = [RangeOption(10485760,10485760)] 2025/12/10 02:23:11 DEBUG : Returning error reader 2025/12/10 02:23:11 DEBUG : BOOM: simulated read failure 2025/12/10 02:23:11 DEBUG : test-multithread-abort: Reopening on read failure after offset 0 bytes: retry 8/10: BOOM: simulated read failure 2025/12/10 02:23:11 DEBUG : Open with options = [RangeOption(10485760,10485760)] 2025/12/10 02:23:12 DEBUG : Returning error reader 2025/12/10 02:23:12 DEBUG : BOOM: simulated read failure 2025/12/10 02:23:12 DEBUG : test-multithread-abort: Reopening on read failure after offset 0 bytes: retry 9/10: BOOM: simulated read failure 2025/12/10 02:23:12 DEBUG : Open with options = [RangeOption(10485760,10485760)] 2025/12/10 02:23:13 DEBUG : Returning error reader 2025/12/10 02:23:13 DEBUG : BOOM: simulated read failure 2025/12/10 02:23:13 DEBUG : test-multithread-abort: Reopening on read failure after offset 0 bytes: retry 10/10: BOOM: simulated read failure 2025/12/10 02:23:13 DEBUG : test-multithread-abort: Reopen failed after offset 0 bytes read: failed to reopen: too many retries 2025/12/10 02:23:13 DEBUG : test-multithread-abort: multi-thread copy: chunk 3/3 failed: multi-thread copy: failed to write chunk: BOOM: simulated read failure 2025/12/10 02:23:13 DEBUG : test-multithread-abort: multi-thread copy: cancelling transfer on exit 2025/12/10 02:23:13 DEBUG : test-multithread-abort: multipart upload "47wUQ83TcRQEh.XJ7IBBFiPj3GJSlTYAohva4.GoWL1iSiSdEhdIJlqMT1cznJ_uB4eA_GJuBlpkqdDcDo83AZEVVhLNQfE8PCuRxgRfG9Qx2K.mAQGXt0Z9RecSLxV0" aborted --- PASS: TestMultithreadCopyAbort (11.76s) === RUN TestSizeDiffers 2025/12/10 02:23:14 DEBUG : a: size = 0 OK 2025/12/10 02:23:14 DEBUG : a: size = 1 (memory) 2025/12/10 02:23:14 DEBUG : a: size = 2 (memory) --- PASS: TestSizeDiffers (0.00s) === RUN TestReOpen === RUN TestReOpen/Normal === RUN TestReOpen/Normal/Basics 2025/12/10 02:23:14 DEBUG : potato: Seek from 10 to 0 === RUN TestReOpen/Normal/ErrorAtStart === RUN TestReOpen/Normal/WithErrors 2025/12/10 02:23:14 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 1/10: test error 2025/12/10 02:23:14 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 2/10: test error 2025/12/10 02:23:14 DEBUG : potato: Reopening on read failure after offset 6 bytes: retry 3/10: test error === RUN TestReOpen/Normal/TooManyErrors 2025/12/10 02:23:14 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 1/3: test error 2025/12/10 02:23:14 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 2/3: test error 2025/12/10 02:23:14 DEBUG : potato: Reopening on read failure after offset 6 bytes: retry 3/3: test error 2025/12/10 02:23:14 DEBUG : potato: Reopen failed after offset 6 bytes read: failed to reopen: too many retries === RUN TestReOpen/Normal/ReadAt 2025/12/10 02:23:14 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 0/10: test error 2025/12/10 02:23:14 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 1/10: test error 2025/12/10 02:23:14 DEBUG : potato: Seek from 5 to 1 === RUN TestReOpen/Normal/Seek 2025/12/10 02:23:14 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 0/10: test error 2025/12/10 02:23:14 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 1/10: test error 2025/12/10 02:23:14 DEBUG : potato: Seek from 5 to 2 === RUN TestReOpen/Normal/AccountRead === RUN TestReOpen/Normal/AccountReadDelay 2025/12/10 02:23:14 DEBUG : potato: Seek from 10 to 0 2025/12/10 02:23:14 DEBUG : potato: Seek from 10 to 0 2025/12/10 02:23:14 DEBUG : potato: Seek from 10 to 0 === RUN TestReOpen/Normal/AccountReadError === RUN TestReOpen/WithRangeOption === RUN TestReOpen/WithRangeOption/Basics 2025/12/10 02:23:14 DEBUG : potato: Seek from 7 to 0 === RUN TestReOpen/WithRangeOption/ErrorAtStart === RUN TestReOpen/WithRangeOption/WithErrors 2025/12/10 02:23:14 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 1/10: test error 2025/12/10 02:23:14 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 2/10: test error 2025/12/10 02:23:14 DEBUG : potato: Reopening on read failure after offset 6 bytes: retry 3/10: test error === RUN TestReOpen/WithRangeOption/TooManyErrors 2025/12/10 02:23:14 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 1/3: test error 2025/12/10 02:23:14 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 2/3: test error 2025/12/10 02:23:14 DEBUG : potato: Reopening on read failure after offset 6 bytes: retry 3/3: test error 2025/12/10 02:23:14 DEBUG : potato: Reopen failed after offset 6 bytes read: failed to reopen: too many retries === RUN TestReOpen/WithRangeOption/ReadAt 2025/12/10 02:23:14 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 0/10: test error 2025/12/10 02:23:14 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 1/10: test error 2025/12/10 02:23:14 DEBUG : potato: Seek from 5 to 1 === RUN TestReOpen/WithRangeOption/Seek 2025/12/10 02:23:14 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 0/10: test error 2025/12/10 02:23:14 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 1/10: test error 2025/12/10 02:23:14 DEBUG : potato: Seek from 5 to 2 2025/12/10 02:23:14 DEBUG : potato: Seek from 7 to 4 === RUN TestReOpen/WithRangeOption/AccountRead === RUN TestReOpen/WithRangeOption/AccountReadDelay 2025/12/10 02:23:14 DEBUG : potato: Seek from 7 to 0 2025/12/10 02:23:14 DEBUG : potato: Seek from 7 to 0 2025/12/10 02:23:14 DEBUG : potato: Seek from 7 to 0 === RUN TestReOpen/WithRangeOption/AccountReadError === RUN TestReOpen/WithSeekOption === RUN TestReOpen/WithSeekOption/Basics 2025/12/10 02:23:14 DEBUG : potato: Seek from 8 to 0 === RUN TestReOpen/WithSeekOption/ErrorAtStart === RUN TestReOpen/WithSeekOption/WithErrors 2025/12/10 02:23:14 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 1/10: test error 2025/12/10 02:23:14 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 2/10: test error 2025/12/10 02:23:14 DEBUG : potato: Reopening on read failure after offset 6 bytes: retry 3/10: test error === RUN TestReOpen/WithSeekOption/TooManyErrors 2025/12/10 02:23:14 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 1/3: test error 2025/12/10 02:23:14 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 2/3: test error 2025/12/10 02:23:14 DEBUG : potato: Reopening on read failure after offset 6 bytes: retry 3/3: test error 2025/12/10 02:23:14 DEBUG : potato: Reopen failed after offset 6 bytes read: failed to reopen: too many retries === RUN TestReOpen/WithSeekOption/ReadAt 2025/12/10 02:23:14 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 0/10: test error 2025/12/10 02:23:14 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 1/10: test error 2025/12/10 02:23:14 DEBUG : potato: Seek from 5 to 1 === RUN TestReOpen/WithSeekOption/Seek 2025/12/10 02:23:14 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 0/10: test error 2025/12/10 02:23:14 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 1/10: test error 2025/12/10 02:23:14 DEBUG : potato: Seek from 5 to 2 2025/12/10 02:23:14 DEBUG : potato: Seek from 7 to 5 === RUN TestReOpen/WithSeekOption/AccountRead === RUN TestReOpen/WithSeekOption/AccountReadDelay 2025/12/10 02:23:14 DEBUG : potato: Seek from 8 to 0 2025/12/10 02:23:14 DEBUG : potato: Seek from 8 to 0 2025/12/10 02:23:14 DEBUG : potato: Seek from 8 to 0 === RUN TestReOpen/WithSeekOption/AccountReadError === RUN TestReOpen/UnknownSize === RUN TestReOpen/UnknownSize/Basics 2025/12/10 02:23:14 DEBUG : potato: Seek from 9 to 0 === RUN TestReOpen/UnknownSize/ErrorAtStart === RUN TestReOpen/UnknownSize/WithErrors 2025/12/10 02:23:14 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 1/10: test error 2025/12/10 02:23:14 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 2/10: test error 2025/12/10 02:23:14 DEBUG : potato: Reopening on read failure after offset 6 bytes: retry 3/10: test error === RUN TestReOpen/UnknownSize/TooManyErrors 2025/12/10 02:23:14 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 1/3: test error 2025/12/10 02:23:14 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 2/3: test error 2025/12/10 02:23:14 DEBUG : potato: Reopening on read failure after offset 6 bytes: retry 3/3: test error 2025/12/10 02:23:14 DEBUG : potato: Reopen failed after offset 6 bytes read: failed to reopen: too many retries === RUN TestReOpen/UnknownSize/ReadAt 2025/12/10 02:23:14 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 0/10: test error 2025/12/10 02:23:14 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 1/10: test error 2025/12/10 02:23:14 DEBUG : potato: Seek from 5 to 1 === RUN TestReOpen/UnknownSize/Seek 2025/12/10 02:23:14 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 0/10: test error 2025/12/10 02:23:14 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 1/10: test error 2025/12/10 02:23:14 DEBUG : potato: Seek from 5 to 2 2025/12/10 02:23:14 DEBUG : potato: Seek from 7 to 6 === RUN TestReOpen/UnknownSize/AccountRead === RUN TestReOpen/UnknownSize/AccountReadDelay 2025/12/10 02:23:14 DEBUG : potato: Seek from 9 to 0 2025/12/10 02:23:14 DEBUG : potato: Seek from 9 to 0 2025/12/10 02:23:14 DEBUG : potato: Seek from 9 to 0 === RUN TestReOpen/UnknownSize/AccountReadError --- PASS: TestReOpen (0.01s) --- PASS: TestReOpen/Normal (0.00s) --- PASS: TestReOpen/Normal/Basics (0.00s) --- PASS: TestReOpen/Normal/ErrorAtStart (0.00s) --- PASS: TestReOpen/Normal/WithErrors (0.00s) --- PASS: TestReOpen/Normal/TooManyErrors (0.00s) --- PASS: TestReOpen/Normal/ReadAt (0.00s) --- PASS: TestReOpen/Normal/Seek (0.00s) --- PASS: TestReOpen/Normal/AccountRead (0.00s) --- PASS: TestReOpen/Normal/AccountReadDelay (0.00s) --- PASS: TestReOpen/Normal/AccountReadError (0.00s) --- PASS: TestReOpen/WithRangeOption (0.00s) --- PASS: TestReOpen/WithRangeOption/Basics (0.00s) --- PASS: TestReOpen/WithRangeOption/ErrorAtStart (0.00s) --- PASS: TestReOpen/WithRangeOption/WithErrors (0.00s) --- PASS: TestReOpen/WithRangeOption/TooManyErrors (0.00s) --- PASS: TestReOpen/WithRangeOption/ReadAt (0.00s) --- PASS: TestReOpen/WithRangeOption/Seek (0.00s) --- PASS: TestReOpen/WithRangeOption/AccountRead (0.00s) --- PASS: TestReOpen/WithRangeOption/AccountReadDelay (0.00s) --- PASS: TestReOpen/WithRangeOption/AccountReadError (0.00s) --- PASS: TestReOpen/WithSeekOption (0.00s) --- PASS: TestReOpen/WithSeekOption/Basics (0.00s) --- PASS: TestReOpen/WithSeekOption/ErrorAtStart (0.00s) --- PASS: TestReOpen/WithSeekOption/WithErrors (0.00s) --- PASS: TestReOpen/WithSeekOption/TooManyErrors (0.00s) --- PASS: TestReOpen/WithSeekOption/ReadAt (0.00s) --- PASS: TestReOpen/WithSeekOption/Seek (0.00s) --- PASS: TestReOpen/WithSeekOption/AccountRead (0.00s) --- PASS: TestReOpen/WithSeekOption/AccountReadDelay (0.00s) --- PASS: TestReOpen/WithSeekOption/AccountReadError (0.00s) --- PASS: TestReOpen/UnknownSize (0.00s) --- PASS: TestReOpen/UnknownSize/Basics (0.00s) --- PASS: TestReOpen/UnknownSize/ErrorAtStart (0.00s) --- PASS: TestReOpen/UnknownSize/WithErrors (0.00s) --- PASS: TestReOpen/UnknownSize/TooManyErrors (0.00s) --- PASS: TestReOpen/UnknownSize/ReadAt (0.00s) --- PASS: TestReOpen/UnknownSize/Seek (0.00s) --- PASS: TestReOpen/UnknownSize/AccountRead (0.00s) --- PASS: TestReOpen/UnknownSize/AccountReadDelay (0.00s) --- PASS: TestReOpen/UnknownSize/AccountReadError (0.00s) === RUN TestCheck run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" === RUN TestCheck/1 === RUN TestCheck/2 === RUN TestCheck/3 === RUN TestCheck/4 === RUN TestCheck/5 === RUN TestCheck/6 === RUN TestCheck/7 --- PASS: TestCheck (1.82s) --- PASS: TestCheck/1 (0.05s) --- PASS: TestCheck/2 (0.05s) --- PASS: TestCheck/3 (0.05s) --- PASS: TestCheck/4 (0.05s) --- PASS: TestCheck/5 (0.05s) --- PASS: TestCheck/6 (0.05s) --- PASS: TestCheck/7 (0.05s) === RUN TestCheckFsError 2025/12/10 02:23:15 DEBUG : Creating backend with remote "nonexistent" 2025/12/10 02:23:15 DEBUG : Creating backend with remote "nonexistent" 2025/12/10 02:23:15 DEBUG : Local file system at /home/rclone/go/src/github.com/rclone/rclone/fs/operations/nonexistent: Waiting for checks to finish 2025/12/10 02:23:15 ERROR : Local file system at /home/rclone/go/src/github.com/rclone/rclone/fs/operations/nonexistent: error reading source root directory: directory not found 2025/12/10 02:23:15 NOTICE: Local file system at /home/rclone/go/src/github.com/rclone/rclone/fs/operations/nonexistent: 0 differences found 2025/12/10 02:23:15 NOTICE: Local file system at /home/rclone/go/src/github.com/rclone/rclone/fs/operations/nonexistent: 2 errors while checking --- PASS: TestCheckFsError (0.00s) === RUN TestCheckDownload run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" === RUN TestCheckDownload/1 === RUN TestCheckDownload/2 === RUN TestCheckDownload/3 === RUN TestCheckDownload/4 === RUN TestCheckDownload/5 === RUN TestCheckDownload/6 === RUN TestCheckDownload/7 --- PASS: TestCheckDownload (2.35s) --- PASS: TestCheckDownload/1 (0.11s) --- PASS: TestCheckDownload/2 (0.10s) --- PASS: TestCheckDownload/3 (0.11s) --- PASS: TestCheckDownload/4 (0.16s) --- PASS: TestCheckDownload/5 (0.12s) --- PASS: TestCheckDownload/6 (0.10s) --- PASS: TestCheckDownload/7 (0.11s) === RUN TestCheckSizeOnly run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" === RUN TestCheckSizeOnly/1 === RUN TestCheckSizeOnly/2 === RUN TestCheckSizeOnly/3 === RUN TestCheckSizeOnly/4 === RUN TestCheckSizeOnly/5 === RUN TestCheckSizeOnly/6 === RUN TestCheckSizeOnly/7 --- PASS: TestCheckSizeOnly (1.82s) --- PASS: TestCheckSizeOnly/1 (0.06s) --- PASS: TestCheckSizeOnly/2 (0.05s) --- PASS: TestCheckSizeOnly/3 (0.05s) --- PASS: TestCheckSizeOnly/4 (0.05s) --- PASS: TestCheckSizeOnly/5 (0.05s) --- PASS: TestCheckSizeOnly/6 (0.05s) --- PASS: TestCheckSizeOnly/7 (0.05s) === RUN TestCheckEqualReaders --- PASS: TestCheckEqualReaders (0.00s) === RUN TestParseSumFile run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" 2025/12/10 02:23:20 NOTICE: test.sum: improperly formatted checksum line 4 2025/12/10 02:23:20 NOTICE: test.sum: improperly formatted checksum line 5 2025/12/10 02:23:20 NOTICE: test.sum: improperly formatted checksum line 6 2025/12/10 02:23:20 NOTICE: test.sum: 2 warning(s) suppressed... 2025/12/10 02:23:20 NOTICE: test.sum: improperly formatted checksum line 4 2025/12/10 02:23:20 NOTICE: test.sum: improperly formatted checksum line 5 2025/12/10 02:23:20 NOTICE: test.sum: improperly formatted checksum line 6 2025/12/10 02:23:20 NOTICE: test.sum: 2 warning(s) suppressed... --- PASS: TestParseSumFile (0.58s) === RUN TestCheckSum run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" 2025/12/10 02:23:20 DEBUG : Creating backend with remote "TestS3:rclone-test-yenapon2tigo/data" === RUN TestCheckSum/subtest1 === RUN TestCheckSum/subtest2 === RUN TestCheckSum/subtest3 === RUN TestCheckSum/subtest4 === RUN TestCheckSum/subtest5 === RUN TestCheckSum/subtest6 === RUN TestCheckSum/subtest7 --- PASS: TestCheckSum (4.11s) --- PASS: TestCheckSum/subtest1 (0.15s) --- PASS: TestCheckSum/subtest2 (0.17s) --- PASS: TestCheckSum/subtest3 (0.15s) --- PASS: TestCheckSum/subtest4 (0.16s) --- PASS: TestCheckSum/subtest5 (0.15s) --- PASS: TestCheckSum/subtest6 (0.16s) --- PASS: TestCheckSum/subtest7 (0.15s) === RUN TestCheckSumDownload run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" 2025/12/10 02:23:24 DEBUG : Creating backend with remote "TestS3:rclone-test-yenapon2tigo/data" === RUN TestCheckSumDownload/subtest1 === RUN TestCheckSumDownload/subtest2 === RUN TestCheckSumDownload/subtest3 === RUN TestCheckSumDownload/subtest4 === RUN TestCheckSumDownload/subtest5 === RUN TestCheckSumDownload/subtest6 === RUN TestCheckSumDownload/subtest7 --- PASS: TestCheckSumDownload (4.38s) --- PASS: TestCheckSumDownload/subtest1 (0.21s) --- PASS: TestCheckSumDownload/subtest2 (0.20s) --- PASS: TestCheckSumDownload/subtest3 (0.27s) --- PASS: TestCheckSumDownload/subtest4 (0.21s) --- PASS: TestCheckSumDownload/subtest5 (0.21s) --- PASS: TestCheckSumDownload/subtest6 (0.20s) --- PASS: TestCheckSumDownload/subtest7 (0.20s) === RUN TestApplyTransforms 2025/12/10 02:23:29 DEBUG : Creating backend with remote "TestS3:rclone-test-gomekuj0tesa" 2025/12/10 02:23:29 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2025/12/10 02:23:29 DEBUG : Creating backend with remote "/tmp/rclone2037500189" run.go:185: Remote "S3 bucket rclone-test-gomekuj0tesa", Local "Local file system at /tmp/rclone2037500189", Modify Window "1ns" 2025/12/10 02:23:29 INFO : S3 bucket rclone-test-gomekuj0tesa: Bucket "rclone-test-gomekuj0tesa" created with ACL "" upper checkfile vs. lower remote (without normalization) 2025/12/10 02:23:30 ERROR : hello, world!: sum not found 2025/12/10 02:23:30 ERROR : HELLO, WORLD!: file not in S3 bucket rclone-test-gomekuj0tesa 2025/12/10 02:23:30 NOTICE: S3 bucket rclone-test-gomekuj0tesa: 1 files missing 2025/12/10 02:23:30 NOTICE: 1 hashes missing 2025/12/10 02:23:30 NOTICE: S3 bucket rclone-test-gomekuj0tesa: 1 differences found 2025/12/10 02:23:30 NOTICE: S3 bucket rclone-test-gomekuj0tesa: 2 errors while checking upper checkfile vs. lower remote (with normalization) 2025/12/10 02:23:30 DEBUG : hello, world!: md5 = 65a8e27d8879283831b664bd8b7f0ad4 OK 2025/12/10 02:23:30 NOTICE: S3 bucket rclone-test-gomekuj0tesa: 0 differences found 2025/12/10 02:23:30 NOTICE: S3 bucket rclone-test-gomekuj0tesa: 1 matching files 2025/12/10 02:23:30 DEBUG : Creating backend with remote "TestS3:rclone-test-jejokal3lisu" 2025/12/10 02:23:30 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2025/12/10 02:23:30 DEBUG : Creating backend with remote "/tmp/rclone1033742842" run.go:185: Remote "S3 bucket rclone-test-jejokal3lisu", Local "Local file system at /tmp/rclone1033742842", Modify Window "1ns" 2025/12/10 02:23:30 INFO : S3 bucket rclone-test-jejokal3lisu: Bucket "rclone-test-jejokal3lisu" created with ACL "" lower checkfile vs. upper remote (without normalization) 2025/12/10 02:23:31 ERROR : HELLO, WORLD!: sum not found 2025/12/10 02:23:31 ERROR : hello, world!: file not in S3 bucket rclone-test-jejokal3lisu 2025/12/10 02:23:31 NOTICE: S3 bucket rclone-test-jejokal3lisu: 1 files missing 2025/12/10 02:23:31 NOTICE: 1 hashes missing 2025/12/10 02:23:31 NOTICE: S3 bucket rclone-test-jejokal3lisu: 1 differences found 2025/12/10 02:23:31 NOTICE: S3 bucket rclone-test-jejokal3lisu: 2 errors while checking lower checkfile vs. upper remote (with normalization) 2025/12/10 02:23:31 DEBUG : HELLO, WORLD!: md5 = 65a8e27d8879283831b664bd8b7f0ad4 OK 2025/12/10 02:23:31 NOTICE: S3 bucket rclone-test-jejokal3lisu: 0 differences found 2025/12/10 02:23:31 NOTICE: S3 bucket rclone-test-jejokal3lisu: 1 matching files 2025/12/10 02:23:31 DEBUG : Creating backend with remote "TestS3:rclone-test-nutanoq8reve" 2025/12/10 02:23:31 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2025/12/10 02:23:31 DEBUG : Creating backend with remote "/tmp/rclone2031210894" run.go:185: Remote "S3 bucket rclone-test-nutanoq8reve", Local "Local file system at /tmp/rclone2031210894", Modify Window "1ns" 2025/12/10 02:23:31 INFO : S3 bucket rclone-test-nutanoq8reve: Bucket "rclone-test-nutanoq8reve" created with ACL "" lower checkfile vs. upperlowermixed remote (without normalization) 2025/12/10 02:23:32 ERROR : HeLlO, wOrLd!: sum not found 2025/12/10 02:23:32 ERROR : hello, world!: file not in S3 bucket rclone-test-nutanoq8reve 2025/12/10 02:23:32 NOTICE: S3 bucket rclone-test-nutanoq8reve: 1 files missing 2025/12/10 02:23:32 NOTICE: 1 hashes missing 2025/12/10 02:23:32 NOTICE: S3 bucket rclone-test-nutanoq8reve: 1 differences found 2025/12/10 02:23:32 NOTICE: S3 bucket rclone-test-nutanoq8reve: 2 errors while checking lower checkfile vs. upperlowermixed remote (with normalization) 2025/12/10 02:23:32 DEBUG : HeLlO, wOrLd!: md5 = 65a8e27d8879283831b664bd8b7f0ad4 OK 2025/12/10 02:23:32 NOTICE: S3 bucket rclone-test-nutanoq8reve: 0 differences found 2025/12/10 02:23:32 NOTICE: S3 bucket rclone-test-nutanoq8reve: 1 matching files 2025/12/10 02:23:32 DEBUG : Creating backend with remote "TestS3:rclone-test-munevuv8nowu" 2025/12/10 02:23:32 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2025/12/10 02:23:32 DEBUG : Creating backend with remote "/tmp/rclone758929788" run.go:185: Remote "S3 bucket rclone-test-munevuv8nowu", Local "Local file system at /tmp/rclone758929788", Modify Window "1ns" 2025/12/10 02:23:32 INFO : S3 bucket rclone-test-munevuv8nowu: Bucket "rclone-test-munevuv8nowu" created with ACL "" upperlowermixed checkfile vs. upper remote (without normalization) 2025/12/10 02:23:33 ERROR : HELLO, WORLD!: sum not found 2025/12/10 02:23:33 ERROR : HeLlO, wOrLd!: file not in S3 bucket rclone-test-munevuv8nowu 2025/12/10 02:23:33 NOTICE: S3 bucket rclone-test-munevuv8nowu: 1 files missing 2025/12/10 02:23:33 NOTICE: 1 hashes missing 2025/12/10 02:23:33 NOTICE: S3 bucket rclone-test-munevuv8nowu: 1 differences found 2025/12/10 02:23:33 NOTICE: S3 bucket rclone-test-munevuv8nowu: 2 errors while checking upperlowermixed checkfile vs. upper remote (with normalization) 2025/12/10 02:23:33 DEBUG : HELLO, WORLD!: md5 = 65a8e27d8879283831b664bd8b7f0ad4 OK 2025/12/10 02:23:33 NOTICE: S3 bucket rclone-test-munevuv8nowu: 0 differences found 2025/12/10 02:23:33 NOTICE: S3 bucket rclone-test-munevuv8nowu: 1 matching files 2025/12/10 02:23:33 DEBUG : Creating backend with remote "TestS3:rclone-test-giyatub6gaja" 2025/12/10 02:23:33 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2025/12/10 02:23:33 DEBUG : Creating backend with remote "/tmp/rclone280190353" run.go:185: Remote "S3 bucket rclone-test-giyatub6gaja", Local "Local file system at /tmp/rclone280190353", Modify Window "1ns" 2025/12/10 02:23:34 INFO : S3 bucket rclone-test-giyatub6gaja: Bucket "rclone-test-giyatub6gaja" created with ACL "" NFD checkfile vs. NFC remote (without normalization) 2025/12/10 02:23:34 ERROR : 測試_Русский___ě_áñ: sum not found 2025/12/10 02:23:34 ERROR : 測試_Русский___ě_áñ: file not in S3 bucket rclone-test-giyatub6gaja 2025/12/10 02:23:34 NOTICE: S3 bucket rclone-test-giyatub6gaja: 1 files missing 2025/12/10 02:23:34 NOTICE: 1 hashes missing 2025/12/10 02:23:34 NOTICE: S3 bucket rclone-test-giyatub6gaja: 1 differences found 2025/12/10 02:23:34 NOTICE: S3 bucket rclone-test-giyatub6gaja: 2 errors while checking NFD checkfile vs. NFC remote (with normalization) 2025/12/10 02:23:34 DEBUG : 測試_Русский___ě_áñ: md5 = 65a8e27d8879283831b664bd8b7f0ad4 OK 2025/12/10 02:23:34 NOTICE: S3 bucket rclone-test-giyatub6gaja: 0 differences found 2025/12/10 02:23:34 NOTICE: S3 bucket rclone-test-giyatub6gaja: 1 matching files 2025/12/10 02:23:34 DEBUG : Creating backend with remote "TestS3:rclone-test-romuqok4sifa" 2025/12/10 02:23:34 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2025/12/10 02:23:34 DEBUG : Creating backend with remote "/tmp/rclone165011525" run.go:185: Remote "S3 bucket rclone-test-romuqok4sifa", Local "Local file system at /tmp/rclone165011525", Modify Window "1ns" 2025/12/10 02:23:35 INFO : S3 bucket rclone-test-romuqok4sifa: Bucket "rclone-test-romuqok4sifa" created with ACL "" NFC checkfile vs. NFD remote (without normalization) 2025/12/10 02:23:35 ERROR : 測試_Русский___ě_áñ: sum not found 2025/12/10 02:23:35 ERROR : 測試_Русский___ě_áñ: file not in S3 bucket rclone-test-romuqok4sifa 2025/12/10 02:23:35 NOTICE: S3 bucket rclone-test-romuqok4sifa: 1 files missing 2025/12/10 02:23:35 NOTICE: 1 hashes missing 2025/12/10 02:23:35 NOTICE: S3 bucket rclone-test-romuqok4sifa: 1 differences found 2025/12/10 02:23:35 NOTICE: S3 bucket rclone-test-romuqok4sifa: 2 errors while checking NFC checkfile vs. NFD remote (with normalization) 2025/12/10 02:23:35 DEBUG : 測試_Русский___ě_áñ: md5 = 65a8e27d8879283831b664bd8b7f0ad4 OK 2025/12/10 02:23:35 NOTICE: S3 bucket rclone-test-romuqok4sifa: 0 differences found 2025/12/10 02:23:35 NOTICE: S3 bucket rclone-test-romuqok4sifa: 1 matching files 2025/12/10 02:23:35 DEBUG : Creating backend with remote "TestS3:rclone-test-bulaxiz9qova" 2025/12/10 02:23:35 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2025/12/10 02:23:35 DEBUG : Creating backend with remote "/tmp/rclone384050678" run.go:185: Remote "S3 bucket rclone-test-bulaxiz9qova", Local "Local file system at /tmp/rclone384050678", Modify Window "1ns" 2025/12/10 02:23:36 INFO : S3 bucket rclone-test-bulaxiz9qova: Bucket "rclone-test-bulaxiz9qova" created with ACL "" NFDx2 checkfile vs. both remote (without normalization) 2025/12/10 02:23:36 ERROR : 測試_Русский___ě_áñ測試_Русский___ě_áñ: sum not found 2025/12/10 02:23:36 ERROR : 測試_Русский___ě_áñ測試_Русский___ě_áñ: file not in S3 bucket rclone-test-bulaxiz9qova 2025/12/10 02:23:36 NOTICE: S3 bucket rclone-test-bulaxiz9qova: 1 files missing 2025/12/10 02:23:36 NOTICE: 1 hashes missing 2025/12/10 02:23:36 NOTICE: S3 bucket rclone-test-bulaxiz9qova: 1 differences found 2025/12/10 02:23:36 NOTICE: S3 bucket rclone-test-bulaxiz9qova: 2 errors while checking NFDx2 checkfile vs. both remote (with normalization) 2025/12/10 02:23:36 DEBUG : 測試_Русский___ě_áñ測試_Русский___ě_áñ: md5 = 65a8e27d8879283831b664bd8b7f0ad4 OK 2025/12/10 02:23:36 NOTICE: S3 bucket rclone-test-bulaxiz9qova: 0 differences found 2025/12/10 02:23:36 NOTICE: S3 bucket rclone-test-bulaxiz9qova: 1 matching files 2025/12/10 02:23:36 DEBUG : Creating backend with remote "TestS3:rclone-test-xasawup8vuru" 2025/12/10 02:23:36 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2025/12/10 02:23:36 DEBUG : Creating backend with remote "/tmp/rclone1435690167" run.go:185: Remote "S3 bucket rclone-test-xasawup8vuru", Local "Local file system at /tmp/rclone1435690167", Modify Window "1ns" 2025/12/10 02:23:37 INFO : S3 bucket rclone-test-xasawup8vuru: Bucket "rclone-test-xasawup8vuru" created with ACL "" NFCx2 checkfile vs. both remote (without normalization) 2025/12/10 02:23:37 ERROR : 測試_Русский___ě_áñ測試_Русский___ě_áñ: sum not found 2025/12/10 02:23:37 ERROR : 測試_Русский___ě_áñ測試_Русский___ě_áñ: file not in S3 bucket rclone-test-xasawup8vuru 2025/12/10 02:23:37 NOTICE: S3 bucket rclone-test-xasawup8vuru: 1 files missing 2025/12/10 02:23:37 NOTICE: 1 hashes missing 2025/12/10 02:23:37 NOTICE: S3 bucket rclone-test-xasawup8vuru: 1 differences found 2025/12/10 02:23:37 NOTICE: S3 bucket rclone-test-xasawup8vuru: 2 errors while checking NFCx2 checkfile vs. both remote (with normalization) 2025/12/10 02:23:37 DEBUG : 測試_Русский___ě_áñ測試_Русский___ě_áñ: md5 = 65a8e27d8879283831b664bd8b7f0ad4 OK 2025/12/10 02:23:37 NOTICE: S3 bucket rclone-test-xasawup8vuru: 0 differences found 2025/12/10 02:23:37 NOTICE: S3 bucket rclone-test-xasawup8vuru: 1 matching files 2025/12/10 02:23:37 DEBUG : Creating backend with remote "TestS3:rclone-test-gomejac0qage" 2025/12/10 02:23:37 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2025/12/10 02:23:37 DEBUG : Creating backend with remote "/tmp/rclone1807056892" run.go:185: Remote "S3 bucket rclone-test-gomejac0qage", Local "Local file system at /tmp/rclone1807056892", Modify Window "1ns" 2025/12/10 02:23:38 INFO : S3 bucket rclone-test-gomejac0qage: Bucket "rclone-test-gomejac0qage" created with ACL "" both checkfile vs. NFDx2 remote (without normalization) 2025/12/10 02:23:38 ERROR : 測試_Русский___ě_áñ測試_Русский___ě_áñ: sum not found 2025/12/10 02:23:38 ERROR : 測試_Русский___ě_áñ測試_Русский___ě_áñ: file not in S3 bucket rclone-test-gomejac0qage 2025/12/10 02:23:38 NOTICE: S3 bucket rclone-test-gomejac0qage: 1 files missing 2025/12/10 02:23:38 NOTICE: 1 hashes missing 2025/12/10 02:23:38 NOTICE: S3 bucket rclone-test-gomejac0qage: 1 differences found 2025/12/10 02:23:38 NOTICE: S3 bucket rclone-test-gomejac0qage: 2 errors while checking both checkfile vs. NFDx2 remote (with normalization) 2025/12/10 02:23:38 DEBUG : 測試_Русский___ě_áñ測試_Русский___ě_áñ: md5 = 65a8e27d8879283831b664bd8b7f0ad4 OK 2025/12/10 02:23:38 NOTICE: S3 bucket rclone-test-gomejac0qage: 0 differences found 2025/12/10 02:23:38 NOTICE: S3 bucket rclone-test-gomejac0qage: 1 matching files 2025/12/10 02:23:38 DEBUG : Creating backend with remote "TestS3:rclone-test-linateb5tilu" 2025/12/10 02:23:38 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2025/12/10 02:23:38 DEBUG : Creating backend with remote "/tmp/rclone2773644518" run.go:185: Remote "S3 bucket rclone-test-linateb5tilu", Local "Local file system at /tmp/rclone2773644518", Modify Window "1ns" 2025/12/10 02:23:39 INFO : S3 bucket rclone-test-linateb5tilu: Bucket "rclone-test-linateb5tilu" created with ACL "" both checkfile vs. NFCx2 remote (without normalization) 2025/12/10 02:23:39 ERROR : 測試_Русский___ě_áñ測試_Русский___ě_áñ: sum not found 2025/12/10 02:23:39 ERROR : 測試_Русский___ě_áñ測試_Русский___ě_áñ: file not in S3 bucket rclone-test-linateb5tilu 2025/12/10 02:23:39 NOTICE: S3 bucket rclone-test-linateb5tilu: 1 files missing 2025/12/10 02:23:39 NOTICE: 1 hashes missing 2025/12/10 02:23:39 NOTICE: S3 bucket rclone-test-linateb5tilu: 1 differences found 2025/12/10 02:23:39 NOTICE: S3 bucket rclone-test-linateb5tilu: 2 errors while checking both checkfile vs. NFCx2 remote (with normalization) 2025/12/10 02:23:39 DEBUG : 測試_Русский___ě_áñ測試_Русский___ě_áñ: md5 = 65a8e27d8879283831b664bd8b7f0ad4 OK 2025/12/10 02:23:39 NOTICE: S3 bucket rclone-test-linateb5tilu: 0 differences found 2025/12/10 02:23:39 NOTICE: S3 bucket rclone-test-linateb5tilu: 1 matching files 2025/12/10 02:23:39 DEBUG : S3 bucket rclone-test-linateb5tilu: Purge remote 2025/12/10 02:23:39 DEBUG : S3 bucket rclone-test-linateb5tilu: bucket is versioned: false 2025/12/10 02:23:39 DEBUG : Waiting for deletions to finish 2025/12/10 02:23:39 DEBUG : "測試_Русский___ě_áñ測試_Русский___ě_áñ" version false 2025/12/10 02:23:39 DEBUG : 測試_Русский___ě_áñ測試_Русский___ě_áñ: Deleting (id "") 2025/12/10 02:23:39 INFO : 測試_Русский___ě_áñ測試_Русский___ě_áñ: Deleted 2025/12/10 02:23:40 INFO : S3 bucket rclone-test-linateb5tilu: Bucket "rclone-test-linateb5tilu" deleted 2025/12/10 02:23:40 DEBUG : S3 bucket rclone-test-gomejac0qage: Purge remote 2025/12/10 02:23:40 DEBUG : S3 bucket rclone-test-gomejac0qage: bucket is versioned: false 2025/12/10 02:23:40 DEBUG : Waiting for deletions to finish 2025/12/10 02:23:40 DEBUG : "測試_Русский___ě_áñ測試_Русский___ě_áñ" version false 2025/12/10 02:23:40 DEBUG : 測試_Русский___ě_áñ測試_Русский___ě_áñ: Deleting (id "") 2025/12/10 02:23:40 INFO : 測試_Русский___ě_áñ測試_Русский___ě_áñ: Deleted 2025/12/10 02:23:40 INFO : S3 bucket rclone-test-gomejac0qage: Bucket "rclone-test-gomejac0qage" deleted 2025/12/10 02:23:40 DEBUG : S3 bucket rclone-test-xasawup8vuru: Purge remote 2025/12/10 02:23:40 DEBUG : S3 bucket rclone-test-xasawup8vuru: bucket is versioned: false 2025/12/10 02:23:40 DEBUG : Waiting for deletions to finish 2025/12/10 02:23:40 DEBUG : "測試_Русский___ě_áñ測試_Русский___ě_áñ" version false 2025/12/10 02:23:40 DEBUG : 測試_Русский___ě_áñ測試_Русский___ě_áñ: Deleting (id "") 2025/12/10 02:23:40 INFO : 測試_Русский___ě_áñ測試_Русский___ě_áñ: Deleted 2025/12/10 02:23:41 INFO : S3 bucket rclone-test-xasawup8vuru: Bucket "rclone-test-xasawup8vuru" deleted 2025/12/10 02:23:41 DEBUG : S3 bucket rclone-test-bulaxiz9qova: Purge remote 2025/12/10 02:23:41 DEBUG : S3 bucket rclone-test-bulaxiz9qova: bucket is versioned: false 2025/12/10 02:23:41 DEBUG : Waiting for deletions to finish 2025/12/10 02:23:41 DEBUG : "測試_Русский___ě_áñ測試_Русский___ě_áñ" version false 2025/12/10 02:23:41 DEBUG : 測試_Русский___ě_áñ測試_Русский___ě_áñ: Deleting (id "") 2025/12/10 02:23:41 INFO : 測試_Русский___ě_áñ測試_Русский___ě_áñ: Deleted 2025/12/10 02:23:41 INFO : S3 bucket rclone-test-bulaxiz9qova: Bucket "rclone-test-bulaxiz9qova" deleted 2025/12/10 02:23:41 DEBUG : S3 bucket rclone-test-romuqok4sifa: Purge remote 2025/12/10 02:23:41 DEBUG : S3 bucket rclone-test-romuqok4sifa: bucket is versioned: false 2025/12/10 02:23:41 DEBUG : Waiting for deletions to finish 2025/12/10 02:23:41 DEBUG : "測試_Русский___ě_áñ" version false 2025/12/10 02:23:41 DEBUG : 測試_Русский___ě_áñ: Deleting (id "") 2025/12/10 02:23:41 INFO : 測試_Русский___ě_áñ: Deleted 2025/12/10 02:23:42 INFO : S3 bucket rclone-test-romuqok4sifa: Bucket "rclone-test-romuqok4sifa" deleted 2025/12/10 02:23:42 DEBUG : S3 bucket rclone-test-giyatub6gaja: Purge remote 2025/12/10 02:23:42 DEBUG : S3 bucket rclone-test-giyatub6gaja: bucket is versioned: false 2025/12/10 02:23:42 DEBUG : Waiting for deletions to finish 2025/12/10 02:23:42 DEBUG : "測試_Русский___ě_áñ" version false 2025/12/10 02:23:42 DEBUG : 測試_Русский___ě_áñ: Deleting (id "") 2025/12/10 02:23:42 INFO : 測試_Русский___ě_áñ: Deleted 2025/12/10 02:23:42 INFO : S3 bucket rclone-test-giyatub6gaja: Bucket "rclone-test-giyatub6gaja" deleted 2025/12/10 02:23:42 DEBUG : S3 bucket rclone-test-munevuv8nowu: Purge remote 2025/12/10 02:23:42 DEBUG : S3 bucket rclone-test-munevuv8nowu: bucket is versioned: false 2025/12/10 02:23:42 DEBUG : Waiting for deletions to finish 2025/12/10 02:23:42 DEBUG : "HELLO, WORLD!" version false 2025/12/10 02:23:42 DEBUG : HELLO, WORLD!: Deleting (id "") 2025/12/10 02:23:42 INFO : HELLO, WORLD!: Deleted 2025/12/10 02:23:43 INFO : S3 bucket rclone-test-munevuv8nowu: Bucket "rclone-test-munevuv8nowu" deleted 2025/12/10 02:23:43 DEBUG : S3 bucket rclone-test-nutanoq8reve: Purge remote 2025/12/10 02:23:43 DEBUG : S3 bucket rclone-test-nutanoq8reve: bucket is versioned: false 2025/12/10 02:23:43 DEBUG : Waiting for deletions to finish 2025/12/10 02:23:43 DEBUG : "HeLlO, wOrLd!" version false 2025/12/10 02:23:43 DEBUG : HeLlO, wOrLd!: Deleting (id "") 2025/12/10 02:23:43 INFO : HeLlO, wOrLd!: Deleted 2025/12/10 02:23:43 INFO : S3 bucket rclone-test-nutanoq8reve: Bucket "rclone-test-nutanoq8reve" deleted 2025/12/10 02:23:43 DEBUG : S3 bucket rclone-test-jejokal3lisu: Purge remote 2025/12/10 02:23:43 DEBUG : S3 bucket rclone-test-jejokal3lisu: bucket is versioned: false 2025/12/10 02:23:43 DEBUG : Waiting for deletions to finish 2025/12/10 02:23:43 DEBUG : "HELLO, WORLD!" version false 2025/12/10 02:23:43 DEBUG : HELLO, WORLD!: Deleting (id "") 2025/12/10 02:23:44 INFO : HELLO, WORLD!: Deleted 2025/12/10 02:23:44 INFO : S3 bucket rclone-test-jejokal3lisu: Bucket "rclone-test-jejokal3lisu" deleted 2025/12/10 02:23:44 DEBUG : S3 bucket rclone-test-gomekuj0tesa: Purge remote 2025/12/10 02:23:44 DEBUG : S3 bucket rclone-test-gomekuj0tesa: bucket is versioned: false 2025/12/10 02:23:44 DEBUG : Waiting for deletions to finish 2025/12/10 02:23:44 DEBUG : "hello, world!" version false 2025/12/10 02:23:44 DEBUG : hello, world!: Deleting (id "") 2025/12/10 02:23:44 INFO : hello, world!: Deleted 2025/12/10 02:23:44 INFO : S3 bucket rclone-test-gomekuj0tesa: Bucket "rclone-test-gomekuj0tesa" deleted --- PASS: TestApplyTransforms (15.75s) === RUN TestTruncateString --- PASS: TestTruncateString (0.00s) === RUN TestCopyFile run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" 2025/12/10 02:23:45 DEBUG : file1: Need to transfer - File not found at Destination 2025/12/10 02:23:45 DEBUG : sub/file2: size = 14 OK 2025/12/10 02:23:45 DEBUG : file1: md5 = 0ef726ce9b1a7692357ff70dd321d595 OK 2025/12/10 02:23:45 INFO : file1: Copied (new) to: sub/file2 2025/12/10 02:23:45 DEBUG : sub/file2: size = 14 OK 2025/12/10 02:23:45 DEBUG : file1: Size and modification time the same (differ by 0s, within tolerance 1ns) 2025/12/10 02:23:45 DEBUG : file1: Unchanged skipping 2025/12/10 02:23:45 DEBUG : S3 bucket rclone-test-yenapon2tigo: don't need to copy/move sub/file2, it is already at target location --- PASS: TestCopyFile (0.77s) === RUN TestCopyLongFile run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" copy_test.go:154: Test only runs on local --- SKIP: TestCopyLongFile (0.10s) === RUN TestCopyFileBackupDir run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" 2025/12/10 02:23:46 DEBUG : Creating backend with remote "TestS3:rclone-test-yenapon2tigo/backup" 2025/12/10 02:23:46 DEBUG : dst/file1: size = 14 (Local file system at /tmp/rclone4119116075) 2025/12/10 02:23:46 DEBUG : dst/file1: size = 18 (S3 bucket rclone-test-yenapon2tigo) 2025/12/10 02:23:46 DEBUG : dst/file1: Sizes differ 2025/12/10 02:23:46 DEBUG : dst/file1: size = 18 OK 2025/12/10 02:23:46 DEBUG : dst/file1: md5 = 05164b153084ba910184c26e561a7c18 OK 2025/12/10 02:23:46 INFO : dst/file1: Copied (server-side copy) 2025/12/10 02:23:46 INFO : dst/file1: Deleted 2025/12/10 02:23:46 DEBUG : dst/file1: size = 14 OK 2025/12/10 02:23:46 DEBUG : dst/file1: md5 = 0ef726ce9b1a7692357ff70dd321d595 OK 2025/12/10 02:23:46 INFO : dst/file1: Copied (new) --- PASS: TestCopyFileBackupDir (1.46s) === RUN TestCopyFileCompareDest run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" 2025/12/10 02:23:47 DEBUG : Creating backend with remote "TestS3:rclone-test-yenapon2tigo/dst" 2025/12/10 02:23:47 DEBUG : Creating backend with remote "TestS3:rclone-test-yenapon2tigo/CompareDest" 2025/12/10 02:23:47 DEBUG : one: Need to transfer - File not found at Destination 2025/12/10 02:23:48 DEBUG : one: size = 3 OK 2025/12/10 02:23:48 DEBUG : one: md5 = f97c5d29941bfb1b2fdab0874906ab82 OK 2025/12/10 02:23:48 INFO : one: Copied (new) 2025/12/10 02:23:48 DEBUG : one: size = 5 (Local file system at /tmp/rclone4119116075) 2025/12/10 02:23:48 DEBUG : one: size = 3 (S3 bucket rclone-test-yenapon2tigo path dst) 2025/12/10 02:23:48 DEBUG : one: Sizes differ 2025/12/10 02:23:48 DEBUG : one: size = 5 OK 2025/12/10 02:23:48 DEBUG : one: md5 = 07912d142f5d63ee918b34796b5a2432 OK 2025/12/10 02:23:48 INFO : one: Copied (replaced existing) 2025/12/10 02:23:49 DEBUG : one: size = 5 (Local file system at /tmp/rclone4119116075) 2025/12/10 02:23:49 DEBUG : one: size = 3 (S3 bucket rclone-test-yenapon2tigo path dst) 2025/12/10 02:23:49 DEBUG : one: Sizes differ 2025/12/10 02:23:49 DEBUG : one: size = 5 OK 2025/12/10 02:23:49 DEBUG : one: Size and modification time the same (differ by 0s, within tolerance 1ns) 2025/12/10 02:23:49 DEBUG : one: Destination found in --compare-dest, skipping 2025/12/10 02:23:49 DEBUG : two: Need to transfer - File not found at Destination 2025/12/10 02:23:49 DEBUG : two: size = 3 OK 2025/12/10 02:23:49 DEBUG : two: Size and modification time the same (differ by 0s, within tolerance 1ns) 2025/12/10 02:23:49 DEBUG : two: Destination found in --compare-dest, skipping 2025/12/10 02:23:49 DEBUG : two: Need to transfer - File not found at Destination 2025/12/10 02:23:49 DEBUG : two: size = 3 OK 2025/12/10 02:23:49 DEBUG : two: Size and modification time the same (differ by 0s, within tolerance 1ns) 2025/12/10 02:23:49 DEBUG : two: Destination found in --compare-dest, skipping 2025/12/10 02:23:50 DEBUG : two: Need to transfer - File not found at Destination 2025/12/10 02:23:50 DEBUG : two: size = 5 (Local file system at /tmp/rclone4119116075) 2025/12/10 02:23:50 DEBUG : two: size = 3 (S3 bucket rclone-test-yenapon2tigo path CompareDest) 2025/12/10 02:23:50 DEBUG : two: Sizes differ 2025/12/10 02:23:50 DEBUG : two: size = 5 OK 2025/12/10 02:23:50 DEBUG : two: md5 = 2379e4ce8c3380e996ab0509f17069ad OK 2025/12/10 02:23:50 INFO : two: Copied (new) --- PASS: TestCopyFileCompareDest (3.88s) === RUN TestCopyFileCopyDest run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" 2025/12/10 02:23:51 DEBUG : Creating backend with remote "TestS3:rclone-test-yenapon2tigo/dst" 2025/12/10 02:23:51 DEBUG : Creating backend with remote "TestS3:rclone-test-yenapon2tigo/CopyDest" 2025/12/10 02:23:51 DEBUG : one: Need to transfer - File not found at Destination 2025/12/10 02:23:51 DEBUG : one: size = 3 OK 2025/12/10 02:23:51 DEBUG : one: md5 = f97c5d29941bfb1b2fdab0874906ab82 OK 2025/12/10 02:23:51 INFO : one: Copied (new) 2025/12/10 02:23:52 DEBUG : one: size = 5 (Local file system at /tmp/rclone4119116075) 2025/12/10 02:23:52 DEBUG : one: size = 3 (S3 bucket rclone-test-yenapon2tigo path dst) 2025/12/10 02:23:52 DEBUG : one: Sizes differ 2025/12/10 02:23:52 DEBUG : one: size = 5 OK 2025/12/10 02:23:52 DEBUG : one: md5 = 07912d142f5d63ee918b34796b5a2432 OK 2025/12/10 02:23:52 INFO : one: Copied (replaced existing) 2025/12/10 02:23:52 DEBUG : Creating backend with remote "TestS3:rclone-test-yenapon2tigo/BackupDir" 2025/12/10 02:23:53 DEBUG : one: size = 5 (Local file system at /tmp/rclone4119116075) 2025/12/10 02:23:53 DEBUG : one: size = 3 (S3 bucket rclone-test-yenapon2tigo path dst) 2025/12/10 02:23:53 DEBUG : one: Sizes differ 2025/12/10 02:23:53 DEBUG : one: size = 5 OK 2025/12/10 02:23:53 DEBUG : one: Size and modification time the same (differ by 0s, within tolerance 1ns) 2025/12/10 02:23:53 DEBUG : one: size = 5 (Local file system at /tmp/rclone4119116075) 2025/12/10 02:23:53 DEBUG : one: size = 3 (S3 bucket rclone-test-yenapon2tigo path dst) 2025/12/10 02:23:53 DEBUG : one: Sizes differ 2025/12/10 02:23:53 DEBUG : one: size = 3 OK 2025/12/10 02:23:53 DEBUG : one: md5 = f97c5d29941bfb1b2fdab0874906ab82 OK 2025/12/10 02:23:53 INFO : one: Copied (server-side copy) 2025/12/10 02:23:53 INFO : one: Deleted 2025/12/10 02:23:53 DEBUG : one: size = 5 OK 2025/12/10 02:23:53 DEBUG : one: md5 = 07912d142f5d63ee918b34796b5a2432 OK 2025/12/10 02:23:53 INFO : one: Copied (server-side copy) 2025/12/10 02:23:53 DEBUG : one: Destination found in --copy-dest, using server-side copy 2025/12/10 02:23:54 DEBUG : two: Need to transfer - File not found at Destination 2025/12/10 02:23:54 DEBUG : two: size = 3 OK 2025/12/10 02:23:54 DEBUG : two: Size and modification time the same (differ by 0s, within tolerance 1ns) 2025/12/10 02:23:54 DEBUG : two: size = 3 OK 2025/12/10 02:23:54 DEBUG : two: md5 = b8a9f715dbb64fd5c56e7783c6820a61 OK 2025/12/10 02:23:54 INFO : two: Copied (server-side copy) 2025/12/10 02:23:54 DEBUG : two: Destination found in --copy-dest, using server-side copy 2025/12/10 02:23:55 DEBUG : two: size = 3 OK 2025/12/10 02:23:55 DEBUG : two: Size and modification time the same (differ by 0s, within tolerance 1ns) 2025/12/10 02:23:55 DEBUG : two: Unchanged skipping 2025/12/10 02:23:55 DEBUG : three: Need to transfer - File not found at Destination 2025/12/10 02:23:55 DEBUG : three: size = 7 (Local file system at /tmp/rclone4119116075) 2025/12/10 02:23:55 DEBUG : three: size = 5 (S3 bucket rclone-test-yenapon2tigo path CopyDest) 2025/12/10 02:23:55 DEBUG : three: Sizes differ 2025/12/10 02:23:55 DEBUG : three: Destination not found in --copy-dest 2025/12/10 02:23:55 DEBUG : three: size = 7 OK 2025/12/10 02:23:55 DEBUG : three: md5 = 1bccb9dccb3e9f6a3f9d2a8bdb54b7f5 OK 2025/12/10 02:23:55 INFO : three: Copied (new) --- PASS: TestCopyFileCopyDest (5.73s) === RUN TestCopyInplace run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" copy_test.go:371: Partial uploads not supported --- SKIP: TestCopyInplace (0.11s) === RUN TestCopyLongFileName run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" copy_test.go:404: Partial uploads not supported --- SKIP: TestCopyLongFileName (0.10s) === RUN TestCopyLongFileNameCollision run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" copy_test.go:437: Partial uploads not supported --- SKIP: TestCopyLongFileNameCollision (0.10s) === RUN TestCopyFileMaxTransfer run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" 2025/12/10 02:23:57 DEBUG : TestCopyFileMaxTransfer/file1: Need to transfer - File not found at Destination 2025/12/10 02:23:57 DEBUG : TestCopyFileMaxTransfer/file1: size = 14 OK 2025/12/10 02:23:57 DEBUG : TestCopyFileMaxTransfer/file1: md5 = 0ef726ce9b1a7692357ff70dd321d595 OK 2025/12/10 02:23:57 INFO : TestCopyFileMaxTransfer/file1: Copied (new) 2025/12/10 02:23:57 DEBUG : TestCopyFileMaxTransfer/file2: Need to transfer - File not found at Destination 2025/12/10 02:23:57 ERROR : TestCopyFileMaxTransfer/file2: Failed to copy: operation error S3: PutObject, exceeded maximum number of attempts, 1, https response error StatusCode: 0, RequestID: , HostID: , request send failed, Put "https://rclone-test-yenapon2tigo.s3.eu-west-2.amazonaws.com/TestCopyFileMaxTransfer/file2?x-id=PutObject": max transfer limit reached as set by --max-transfer 2025/12/10 02:23:57 DEBUG : TestCopyFileMaxTransfer/file3: Need to transfer - File not found at Destination 2025/12/10 02:23:57 DEBUG : TestCopyFileMaxTransfer/file4: Need to transfer - File not found at Destination 2025/12/10 02:23:58 DEBUG : TestCopyFileMaxTransfer/file4: size = 2062 OK 2025/12/10 02:23:58 DEBUG : TestCopyFileMaxTransfer/file4: md5 = ea24e289c85a8642504a8a724b924032 OK 2025/12/10 02:23:58 INFO : TestCopyFileMaxTransfer/file4: Copied (new) --- PASS: TestCopyFileMaxTransfer (1.28s) === RUN TestDeduplicateInteractive run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" dedupe_test.go:24: Can't test deduplicate - no duplicate files possible --- SKIP: TestDeduplicateInteractive (0.10s) === RUN TestDeduplicateSkip run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" dedupe_test.go:24: Can't test deduplicate - no duplicate files possible --- SKIP: TestDeduplicateSkip (0.09s) === RUN TestDeduplicateSizeOnly run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" dedupe_test.go:24: Can't test deduplicate - no duplicate files possible --- SKIP: TestDeduplicateSizeOnly (0.10s) === RUN TestDeduplicateFirst run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" dedupe_test.go:24: Can't test deduplicate - no duplicate files possible --- SKIP: TestDeduplicateFirst (0.10s) === RUN TestDeduplicateNewest run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" dedupe_test.go:24: Can't test deduplicate - no duplicate files possible --- SKIP: TestDeduplicateNewest (0.10s) === RUN TestDeduplicateNewestByHash run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" 2025/12/10 02:23:59 INFO : S3 bucket rclone-test-yenapon2tigo: Looking for duplicate md5 hashes using newest mode. 2025/12/10 02:23:59 NOTICE: dcef1b8748fdcba2bd9868cbc04291d0: Found 3 files with duplicate md5 hashes 2025/12/10 02:23:59 INFO : one: Deleted 2025/12/10 02:23:59 INFO : also/one: Deleted 2025/12/10 02:23:59 NOTICE: dcef1b8748fdcba2bd9868cbc04291d0: Deleted 2 extra copies --- PASS: TestDeduplicateNewestByHash (1.37s) === RUN TestDeduplicateOldest run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" dedupe_test.go:24: Can't test deduplicate - no duplicate files possible --- SKIP: TestDeduplicateOldest (0.10s) === RUN TestDeduplicateLargest run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" dedupe_test.go:24: Can't test deduplicate - no duplicate files possible --- SKIP: TestDeduplicateLargest (0.10s) === RUN TestDeduplicateSmallest run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" dedupe_test.go:24: Can't test deduplicate - no duplicate files possible --- SKIP: TestDeduplicateSmallest (0.10s) === RUN TestDeduplicateRename run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" dedupe_test.go:24: Can't test deduplicate - no duplicate files possible --- SKIP: TestDeduplicateRename (0.10s) === RUN TestMergeDirs run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" dedupe_test.go:256: Can't merge directories --- SKIP: TestMergeDirs (0.10s) === RUN TestListDirSorted run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" 2025/12/10 02:24:02 DEBUG : a.txt: Excluded (Size Filter) 2025/12/10 02:24:02 DEBUG : a.txt: Excluded 2025/12/10 02:24:02 DEBUG : sub dir/hello world: Excluded (Size Filter) 2025/12/10 02:24:02 DEBUG : sub dir/hello world: Excluded 2025/12/10 02:24:02 DEBUG : sub dir/hello world2: Excluded (Size Filter) 2025/12/10 02:24:02 DEBUG : sub dir/hello world2: Excluded 2025/12/10 02:24:02 DEBUG : sub dir/ignore dir: Excluded 2025/12/10 02:24:02 DEBUG : sub dir/hello world: Excluded (Size Filter) 2025/12/10 02:24:02 DEBUG : sub dir/hello world: Excluded 2025/12/10 02:24:02 DEBUG : sub dir/hello world2: Excluded (Size Filter) 2025/12/10 02:24:02 DEBUG : sub dir/hello world2: Excluded 2025/12/10 02:24:02 DEBUG : sub dir/ignore dir: Excluded --- PASS: TestListDirSorted (2.19s) === RUN TestListDirSortedFn run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" 2025/12/10 02:24:04 DEBUG : a.txt: Excluded (Size Filter) 2025/12/10 02:24:04 DEBUG : a.txt: Excluded 2025/12/10 02:24:04 DEBUG : sub dir/hello world: Excluded (Size Filter) 2025/12/10 02:24:04 DEBUG : sub dir/hello world: Excluded 2025/12/10 02:24:04 DEBUG : sub dir/hello world2: Excluded (Size Filter) 2025/12/10 02:24:04 DEBUG : sub dir/hello world2: Excluded 2025/12/10 02:24:04 DEBUG : sub dir/ignore dir: Excluded 2025/12/10 02:24:04 DEBUG : sub dir/hello world: Excluded (Size Filter) 2025/12/10 02:24:04 DEBUG : sub dir/hello world: Excluded 2025/12/10 02:24:04 DEBUG : sub dir/hello world2: Excluded (Size Filter) 2025/12/10 02:24:04 DEBUG : sub dir/hello world2: Excluded 2025/12/10 02:24:04 DEBUG : sub dir/ignore dir: Excluded --- PASS: TestListDirSortedFn (2.09s) === RUN TestListJSON run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" === RUN TestListJSON/Default === RUN TestListJSON/FilesOnly === RUN TestListJSON/DirsOnly === RUN TestListJSON/Recurse === RUN TestListJSON/SubDir === RUN TestListJSON/NoModTime === RUN TestListJSON/NoMimeType === RUN TestListJSON/ShowHash === RUN TestListJSON/HashTypes === RUN TestListJSON/Metadata --- PASS: TestListJSON (1.54s) --- PASS: TestListJSON/Default (0.09s) --- PASS: TestListJSON/FilesOnly (0.09s) --- PASS: TestListJSON/DirsOnly (0.05s) --- PASS: TestListJSON/Recurse (0.14s) --- PASS: TestListJSON/SubDir (0.10s) --- PASS: TestListJSON/NoModTime (0.09s) --- PASS: TestListJSON/NoMimeType (0.09s) --- PASS: TestListJSON/ShowHash (0.10s) --- PASS: TestListJSON/HashTypes (0.09s) --- PASS: TestListJSON/Metadata (0.10s) === RUN TestStatJSON run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" === RUN TestStatJSON/Root === RUN TestStatJSON/RootFilesOnly === RUN TestStatJSON/RootDirsOnly === RUN TestStatJSON/Dir === RUN TestStatJSON/DirWithTrailingSlash === RUN TestStatJSON/File === RUN TestStatJSON/NotFound === RUN TestStatJSON/DirFilesOnly === RUN TestStatJSON/FileFilesOnly === RUN TestStatJSON/NotFoundFilesOnly === RUN TestStatJSON/DirDirsOnly === RUN TestStatJSON/FileDirsOnly === RUN TestStatJSON/NotFoundDirsOnly === RUN TestStatJSON/RootNotFound 2025/12/10 02:24:07 DEBUG : Creating backend with remote "TestS3:rclone-test-yenapon2tigo/notfound" --- PASS: TestStatJSON (1.43s) --- PASS: TestStatJSON/Root (0.05s) --- PASS: TestStatJSON/RootFilesOnly (0.00s) --- PASS: TestStatJSON/RootDirsOnly (0.05s) --- PASS: TestStatJSON/Dir (0.10s) --- PASS: TestStatJSON/DirWithTrailingSlash (0.05s) --- PASS: TestStatJSON/File (0.04s) --- PASS: TestStatJSON/NotFound (0.10s) --- PASS: TestStatJSON/DirFilesOnly (0.05s) --- PASS: TestStatJSON/FileFilesOnly (0.05s) --- PASS: TestStatJSON/NotFoundFilesOnly (0.05s) --- PASS: TestStatJSON/DirDirsOnly (0.05s) --- PASS: TestStatJSON/FileDirsOnly (0.05s) --- PASS: TestStatJSON/NotFoundDirsOnly (0.05s) --- PASS: TestStatJSON/RootNotFound (0.18s) === RUN TestMkdir run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" 2025/12/10 02:24:08 INFO : S3 bucket rclone-test-yenapon2tigo: Making directory 2025/12/10 02:24:08 INFO : S3 bucket rclone-test-yenapon2tigo: Making directory --- PASS: TestMkdir (0.25s) === RUN TestLsd run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" --- PASS: TestLsd (0.42s) === RUN TestLs run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" --- PASS: TestLs (0.63s) === RUN TestLsWithFilesFrom run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" 2025/12/10 02:24:09 DEBUG : empty space: Excluded (FilesFrom Filter) 2025/12/10 02:24:09 DEBUG : empty space: Excluded --- PASS: TestLsWithFilesFrom (0.72s) === RUN TestLsLong run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" --- PASS: TestLsLong (0.72s) === RUN TestHashSums run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" === RUN TestHashSums/Md5 === RUN TestHashSums/Md5Download --- PASS: TestHashSums (0.77s) --- PASS: TestHashSums/Md5 (0.06s) --- PASS: TestHashSums/Md5Download (0.12s) === RUN TestHashSumsWithErrors 2025/12/10 02:24:11 DEBUG : Creating backend with remote ":memory:" 2025/12/10 02:24:11 ERROR : file1: hash unsupported: hash type not supported --- PASS: TestHashSumsWithErrors (0.00s) === RUN TestHashStream 2025/12/10 02:24:11 DEBUG : Creating md5 hash of 0 bytes read from input stream 2025/12/10 02:24:11 DEBUG : Creating md5 hash of 0 bytes read from input stream 2025/12/10 02:24:11 DEBUG : Creating sha1 hash of 0 bytes read from input stream 2025/12/10 02:24:11 DEBUG : Creating sha1 hash of 0 bytes read from input stream 2025/12/10 02:24:11 DEBUG : Creating md5 hash of 12 bytes read from input stream 2025/12/10 02:24:11 DEBUG : Creating md5 hash of 12 bytes read from input stream 2025/12/10 02:24:11 DEBUG : Creating sha1 hash of 12 bytes read from input stream 2025/12/10 02:24:11 DEBUG : Creating sha1 hash of 12 bytes read from input stream --- PASS: TestHashStream (0.00s) === RUN TestSuffixName --- PASS: TestSuffixName (0.00s) === RUN TestCount run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" --- PASS: TestCount (0.91s) === RUN TestDelete run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" 2025/12/10 02:24:13 DEBUG : Waiting for deletions to finish 2025/12/10 02:24:13 DEBUG : large: Excluded (Size Filter) 2025/12/10 02:24:13 INFO : small: Deleted 2025/12/10 02:24:13 INFO : medium: Deleted --- PASS: TestDelete (0.93s) === RUN TestMaxDelete run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" 2025/12/10 02:24:13 DEBUG : Waiting for deletions to finish 2025/12/10 02:24:13 ERROR : small: Got fatal error on delete: --max-delete threshold reached 2025/12/10 02:24:14 INFO : medium: Deleted 2025/12/10 02:24:14 INFO : large: Deleted --- PASS: TestMaxDelete (0.97s) === RUN TestMaxDeleteSizeLargeFile run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" 2025/12/10 02:24:14 DEBUG : Waiting for deletions to finish 2025/12/10 02:24:14 ERROR : large: Got fatal error on delete: --max-delete-size threshold reached 2025/12/10 02:24:15 INFO : medium: Deleted 2025/12/10 02:24:15 INFO : small: Deleted --- PASS: TestMaxDeleteSizeLargeFile (1.06s) === RUN TestMaxDeleteSize run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" 2025/12/10 02:24:15 DEBUG : Waiting for deletions to finish 2025/12/10 02:24:16 ERROR : small: Got fatal error on delete: --max-delete-size threshold reached 2025/12/10 02:24:16 INFO : medium: Deleted 2025/12/10 02:24:16 INFO : large: Deleted --- PASS: TestMaxDeleteSize (0.97s) === RUN TestReadFile run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" --- PASS: TestReadFile (0.56s) === RUN TestRetry 2025/12/10 02:24:16 DEBUG : Received error: Wrapped EOF is retriable: EOF - low level retry 1/5 2025/12/10 02:24:16 DEBUG : Received error: Wrapped EOF is retriable: EOF - low level retry 2/5 2025/12/10 02:24:16 DEBUG : Sleeping for 10ms (as indicated by the server) to obey Retry-After error: BANG: trying again in 10ms 2025/12/10 02:24:16 DEBUG : Sleeping for 10ms (as indicated by the server) to obey Retry-After error: BANG: trying again in 10ms 2025/12/10 02:24:16 DEBUG : Sleeping for 10ms (as indicated by the server) to obey Retry-After error: BANG: trying again in 10ms 2025/12/10 02:24:16 DEBUG : Sleeping for 10ms (as indicated by the server) to obey Retry-After error: BANG: trying again in 10ms 2025/12/10 02:24:17 DEBUG : Sleeping for 10ms (as indicated by the server) to obey Retry-After error: BANG: trying again in 10ms --- PASS: TestRetry (0.05s) === RUN TestCat run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" --- PASS: TestCat (1.34s) === RUN TestPurge 2025/12/10 02:24:18 DEBUG : Creating backend with remote "TestS3:rclone-test-tuhoruf0juwe" 2025/12/10 02:24:18 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2025/12/10 02:24:18 DEBUG : Creating backend with remote "/tmp/rclone368916514" run.go:185: Remote "S3 bucket rclone-test-tuhoruf0juwe", Local "Local file system at /tmp/rclone368916514", Modify Window "1ns" 2025/12/10 02:24:19 INFO : S3 bucket rclone-test-tuhoruf0juwe: Bucket "rclone-test-tuhoruf0juwe" created with ACL "" 2025/12/10 02:24:19 INFO : A2: Making directory 2025/12/10 02:24:19 INFO : A1/B2: Making directory 2025/12/10 02:24:19 INFO : A1/B2/C2: Making directory 2025/12/10 02:24:19 INFO : A1/B1/C3: Making directory 2025/12/10 02:24:19 INFO : A3: Making directory 2025/12/10 02:24:19 INFO : A3/B3: Making directory 2025/12/10 02:24:19 INFO : A3/B3/C4: Making directory fstest.go:250: Filtering empty directory "A2" fstest.go:250: Filtering empty directory "A1/B2" fstest.go:250: Filtering empty directory "A1/B2/C2" fstest.go:250: Filtering empty directory "A1/B1/C3" fstest.go:250: Filtering empty directory "A3" fstest.go:250: Filtering empty directory "A3/B3" fstest.go:250: Filtering empty directory "A3/B3/C4" 2025/12/10 02:24:19 DEBUG : S3 bucket rclone-test-tuhoruf0juwe: bucket is versioned: false 2025/12/10 02:24:19 DEBUG : Waiting for deletions to finish 2025/12/10 02:24:19 DEBUG : "A1/B1/C1/one" version false 2025/12/10 02:24:19 DEBUG : A1/B1/C1/one: Deleting (id "") 2025/12/10 02:24:19 INFO : A1/B1/C1/one: Deleted fstest.go:250: Filtering empty directory "A2" fstest.go:250: Filtering empty directory "A1/B2" fstest.go:250: Filtering empty directory "A1/B2/C2" fstest.go:250: Filtering empty directory "A3" fstest.go:250: Filtering empty directory "A3/B3" fstest.go:250: Filtering empty directory "A3/B3/C4" 2025/12/10 02:24:19 DEBUG : Waiting for deletions to finish 2025/12/10 02:24:19 DEBUG : "A1/two" version false 2025/12/10 02:24:19 DEBUG : A1/two: Deleting (id "") 2025/12/10 02:24:19 INFO : A1/two: Deleted 2025/12/10 02:24:20 INFO : S3 bucket rclone-test-tuhoruf0juwe: Bucket "rclone-test-tuhoruf0juwe" deleted 2025/12/10 02:24:20 DEBUG : S3 bucket rclone-test-tuhoruf0juwe: Purge remote 2025/12/10 02:24:20 DEBUG : Waiting for deletions to finish 2025/12/10 02:24:20 NOTICE: purge failed: directory not found --- PASS: TestPurge (1.81s) === RUN TestRmdirsNoLeaveRoot run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" 2025/12/10 02:24:20 INFO : A2: Making directory 2025/12/10 02:24:20 INFO : A1/B2: Making directory 2025/12/10 02:24:20 INFO : A1/B2/C2: Making directory 2025/12/10 02:24:20 INFO : A1/B1/C3: Making directory 2025/12/10 02:24:20 INFO : A3: Making directory 2025/12/10 02:24:20 INFO : A3/B3: Making directory 2025/12/10 02:24:20 INFO : A3/B3/C4: Making directory fstest.go:250: Filtering empty directory "A2" fstest.go:250: Filtering empty directory "A1/B2" fstest.go:250: Filtering empty directory "A1/B2/C2" fstest.go:250: Filtering empty directory "A1/B1/C3" fstest.go:250: Filtering empty directory "A3" fstest.go:250: Filtering empty directory "A3/B3" fstest.go:250: Filtering empty directory "A3/B3/C4" 2025/12/10 02:24:20 DEBUG : removing 1 level 3 directories 2025/12/10 02:24:20 INFO : A3/B3/C4: Removing directory fstest.go:250: Filtering empty directory "A2" fstest.go:250: Filtering empty directory "A1/B2" fstest.go:250: Filtering empty directory "A1/B2/C2" fstest.go:250: Filtering empty directory "A1/B1/C3" fstest.go:250: Filtering empty directory "A3" fstest.go:250: Filtering empty directory "A3/B3" 2025/12/10 02:24:21 DEBUG : removing 1 level 0 directories 2025/12/10 02:24:21 INFO : S3 bucket rclone-test-yenapon2tigo: Removing directory 2025/12/10 02:24:21 INFO : S3 bucket rclone-test-yenapon2tigo: Bucket "rclone-test-yenapon2tigo" deleted --- PASS: TestRmdirsNoLeaveRoot (1.68s) === RUN TestRmdirsLeaveRoot run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" 2025/12/10 02:24:22 INFO : S3 bucket rclone-test-yenapon2tigo: Bucket "rclone-test-yenapon2tigo" created with ACL "" 2025/12/10 02:24:22 INFO : A1: Making directory 2025/12/10 02:24:22 INFO : A1/B1: Making directory 2025/12/10 02:24:22 INFO : A1/B1/C1: Making directory fstest.go:250: Filtering empty directory "A1" fstest.go:250: Filtering empty directory "A1/B1" fstest.go:250: Filtering empty directory "A1/B1/C1" fstest.go:250: Filtering empty directory "A1" --- PASS: TestRmdirsLeaveRoot (0.86s) === RUN TestRmdirsWithFilter run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" 2025/12/10 02:24:22 INFO : A1: Making directory 2025/12/10 02:24:22 INFO : A1/B1: Making directory 2025/12/10 02:24:22 INFO : A1/B1/C1: Making directory fstest.go:250: Filtering empty directory "A1" fstest.go:250: Filtering empty directory "A1/B1" fstest.go:250: Filtering empty directory "A1/B1/C1" fstest.go:250: Filtering empty directory "A1" --- PASS: TestRmdirsWithFilter (0.24s) === RUN TestCopyURL run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" 2025/12/10 02:24:23 DEBUG : filename.txt: File name found in url 2025/12/10 02:24:23 DEBUG : headerfilename.txt: filename found in Content-Disposition header. --- PASS: TestCopyURL (1.18s) === RUN TestCopyURLToWriter --- PASS: TestCopyURLToWriter (0.00s) === RUN TestMoveFile run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" 2025/12/10 02:24:24 DEBUG : file1: Need to transfer - File not found at Destination 2025/12/10 02:24:24 DEBUG : sub/file2: size = 14 OK 2025/12/10 02:24:24 DEBUG : file1: md5 = 0ef726ce9b1a7692357ff70dd321d595 OK 2025/12/10 02:24:24 INFO : file1: Copied (new) to: sub/file2 2025/12/10 02:24:24 INFO : file1: Deleted 2025/12/10 02:24:24 DEBUG : sub/file2: size = 14 OK 2025/12/10 02:24:24 DEBUG : file1: Size and modification time the same (differ by 0s, within tolerance 1ns) 2025/12/10 02:24:24 DEBUG : file1: Unchanged skipping 2025/12/10 02:24:24 INFO : file1: Deleted 2025/12/10 02:24:24 DEBUG : S3 bucket rclone-test-yenapon2tigo: don't need to copy/move sub/file2, it is already at target location --- PASS: TestMoveFile (0.66s) === RUN TestMoveFileWithIgnoreExisting run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" 2025/12/10 02:24:24 DEBUG : file1: Need to transfer - File not found at Destination 2025/12/10 02:24:24 DEBUG : file1: size = 14 OK 2025/12/10 02:24:24 DEBUG : file1: md5 = 0ef726ce9b1a7692357ff70dd321d595 OK 2025/12/10 02:24:24 INFO : file1: Copied (new) 2025/12/10 02:24:24 INFO : file1: Deleted 2025/12/10 02:24:25 DEBUG : file1: Destination exists, skipping 2025/12/10 02:24:25 DEBUG : file1: Not removing source file as destination file exists and --ignore-existing is set --- PASS: TestMoveFileWithIgnoreExisting (0.58s) === RUN TestCaseInsensitiveMoveFile run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" --- PASS: TestCaseInsensitiveMoveFile (0.10s) === RUN TestCaseInsensitiveMoveFileDryRun run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" --- PASS: TestCaseInsensitiveMoveFileDryRun (0.10s) === RUN TestMoveFileBackupDir run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" 2025/12/10 02:24:25 DEBUG : Creating backend with remote "TestS3:rclone-test-yenapon2tigo/backup" 2025/12/10 02:24:25 DEBUG : dst/file1: size = 14 (Local file system at /tmp/rclone4119116075) 2025/12/10 02:24:25 DEBUG : dst/file1: size = 18 (S3 bucket rclone-test-yenapon2tigo) 2025/12/10 02:24:25 DEBUG : dst/file1: Sizes differ 2025/12/10 02:24:26 DEBUG : dst/file1: size = 18 OK 2025/12/10 02:24:26 DEBUG : dst/file1: md5 = 05164b153084ba910184c26e561a7c18 OK 2025/12/10 02:24:26 INFO : dst/file1: Copied (server-side copy) 2025/12/10 02:24:26 INFO : dst/file1: Deleted 2025/12/10 02:24:26 DEBUG : dst/file1: size = 14 OK 2025/12/10 02:24:26 DEBUG : dst/file1: md5 = 0ef726ce9b1a7692357ff70dd321d595 OK 2025/12/10 02:24:26 INFO : dst/file1: Copied (new) 2025/12/10 02:24:26 INFO : dst/file1: Deleted --- PASS: TestMoveFileBackupDir (1.45s) === RUN TestSameConfig --- PASS: TestSameConfig (0.00s) === RUN TestSame --- PASS: TestSame (0.00s) === RUN TestOverlappingFilterCheckWithoutFilter --- PASS: TestOverlappingFilterCheckWithoutFilter (0.00s) === RUN TestOverlappingFilterCheckWithFilter --- PASS: TestOverlappingFilterCheckWithFilter (0.00s) === RUN TestListFormat --- PASS: TestListFormat (0.00s) === RUN TestDirMove run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" 2025/12/10 02:24:27 INFO : A1/B2: Making directory 2025/12/10 02:24:27 INFO : A1/B1/C3: Making directory fstest.go:250: Filtering empty directory "A1/B2" fstest.go:250: Filtering empty directory "A1/B1/C3" 2025/12/10 02:24:28 DEBUG : A2/B1/C1/four: size = 4 OK 2025/12/10 02:24:28 DEBUG : A1/B1/C1/four: md5 = 8cbad96aced40b3838dd9f07f6ef5772 OK 2025/12/10 02:24:28 INFO : A1/B1/C1/four: Copied (server-side copy) to: A2/B1/C1/four 2025/12/10 02:24:28 DEBUG : A2/B1/C2/five: size = 4 OK 2025/12/10 02:24:28 DEBUG : A1/B1/C2/five: md5 = 30056e1cab7a61d256fc8edd970d14f5 OK 2025/12/10 02:24:28 INFO : A1/B1/C2/five: Copied (server-side copy) to: A2/B1/C2/five 2025/12/10 02:24:28 DEBUG : A2/two: size = 3 OK 2025/12/10 02:24:28 DEBUG : A1/two: md5 = b8a9f715dbb64fd5c56e7783c6820a61 OK 2025/12/10 02:24:28 INFO : A1/two: Copied (server-side copy) to: A2/two 2025/12/10 02:24:28 DEBUG : A2/B1/three: size = 5 OK 2025/12/10 02:24:28 DEBUG : A1/B1/three: md5 = 35d6d33467aae9a2e3dccb4b6b027878 OK 2025/12/10 02:24:28 INFO : A1/B1/three: Copied (server-side copy) to: A2/B1/three 2025/12/10 02:24:28 DEBUG : A2/one: size = 3 OK 2025/12/10 02:24:28 DEBUG : A1/one: md5 = f97c5d29941bfb1b2fdab0874906ab82 OK 2025/12/10 02:24:28 INFO : A1/one: Copied (server-side copy) to: A2/one 2025/12/10 02:24:28 INFO : A1/B1/C1/four: Deleted 2025/12/10 02:24:28 INFO : A1/B1/C2/five: Deleted 2025/12/10 02:24:28 INFO : A1/two: Deleted 2025/12/10 02:24:28 INFO : A1/one: Deleted 2025/12/10 02:24:28 INFO : A1/B1/three: Deleted fstest.go:250: Filtering empty directory "A2/B2" fstest.go:250: Filtering empty directory "A2/B1/C3" 2025/12/10 02:24:28 DEBUG : A3/two: size = 3 OK 2025/12/10 02:24:28 DEBUG : A2/two: md5 = b8a9f715dbb64fd5c56e7783c6820a61 OK 2025/12/10 02:24:28 INFO : A2/two: Copied (server-side copy) to: A3/two 2025/12/10 02:24:28 DEBUG : A3/B1/C2/five: size = 4 OK 2025/12/10 02:24:28 DEBUG : A2/B1/C2/five: md5 = 30056e1cab7a61d256fc8edd970d14f5 OK 2025/12/10 02:24:28 INFO : A2/B1/C2/five: Copied (server-side copy) to: A3/B1/C2/five 2025/12/10 02:24:28 DEBUG : A3/B1/three: size = 5 OK 2025/12/10 02:24:28 DEBUG : A2/B1/three: md5 = 35d6d33467aae9a2e3dccb4b6b027878 OK 2025/12/10 02:24:28 INFO : A2/B1/three: Copied (server-side copy) to: A3/B1/three 2025/12/10 02:24:28 DEBUG : A3/one: size = 3 OK 2025/12/10 02:24:28 DEBUG : A2/one: md5 = f97c5d29941bfb1b2fdab0874906ab82 OK 2025/12/10 02:24:28 INFO : A2/one: Copied (server-side copy) to: A3/one 2025/12/10 02:24:28 DEBUG : A3/B1/C1/four: size = 4 OK 2025/12/10 02:24:28 DEBUG : A2/B1/C1/four: md5 = 8cbad96aced40b3838dd9f07f6ef5772 OK 2025/12/10 02:24:28 INFO : A2/B1/C1/four: Copied (server-side copy) to: A3/B1/C1/four 2025/12/10 02:24:28 INFO : A2/two: Deleted 2025/12/10 02:24:28 INFO : A2/B1/C2/five: Deleted 2025/12/10 02:24:28 INFO : A2/one: Deleted 2025/12/10 02:24:28 INFO : A2/B1/three: Deleted 2025/12/10 02:24:28 INFO : A2/B1/C1/four: Deleted fstest.go:250: Filtering empty directory "A3/B2" fstest.go:250: Filtering empty directory "A3/B1/C3" 2025/12/10 02:24:29 INFO : S3 bucket rclone-test-yenapon2tigo: Can't DirMove - falling back to file moves: can't move directory - incompatible remotes 2025/12/10 02:24:29 DEBUG : A4/one: size = 3 OK 2025/12/10 02:24:29 DEBUG : A3/one: md5 = f97c5d29941bfb1b2fdab0874906ab82 OK 2025/12/10 02:24:29 INFO : A3/one: Copied (server-side copy) to: A4/one 2025/12/10 02:24:29 DEBUG : A4/B1/C2/five: size = 4 OK 2025/12/10 02:24:29 DEBUG : A3/B1/C2/five: md5 = 30056e1cab7a61d256fc8edd970d14f5 OK 2025/12/10 02:24:29 INFO : A3/B1/C2/five: Copied (server-side copy) to: A4/B1/C2/five 2025/12/10 02:24:29 DEBUG : A4/two: size = 3 OK 2025/12/10 02:24:29 DEBUG : A3/two: md5 = b8a9f715dbb64fd5c56e7783c6820a61 OK 2025/12/10 02:24:29 INFO : A3/two: Copied (server-side copy) to: A4/two 2025/12/10 02:24:29 DEBUG : A4/B1/three: size = 5 OK 2025/12/10 02:24:29 DEBUG : A3/B1/three: md5 = 35d6d33467aae9a2e3dccb4b6b027878 OK 2025/12/10 02:24:29 INFO : A3/B1/three: Copied (server-side copy) to: A4/B1/three 2025/12/10 02:24:29 DEBUG : A4/B1/C1/four: size = 4 OK 2025/12/10 02:24:29 DEBUG : A3/B1/C1/four: md5 = 8cbad96aced40b3838dd9f07f6ef5772 OK 2025/12/10 02:24:29 INFO : A3/B1/C1/four: Copied (server-side copy) to: A4/B1/C1/four 2025/12/10 02:24:29 INFO : A3/one: Deleted 2025/12/10 02:24:29 INFO : A3/two: Deleted 2025/12/10 02:24:29 INFO : A3/B1/C2/five: Deleted 2025/12/10 02:24:29 INFO : A3/B1/three: Deleted 2025/12/10 02:24:29 INFO : A3/B1/C1/four: Deleted fstest.go:250: Filtering empty directory "A4/B2" fstest.go:250: Filtering empty directory "A4/B1/C3" --- PASS: TestDirMove (3.27s) === RUN TestGetFsInfo run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" --- PASS: TestGetFsInfo (0.10s) === RUN TestRcat === RUN TestRcat/withChecksum=false,ignoreChecksum=false run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" 2025/12/10 02:24:30 DEBUG : S3 bucket rclone-test-yenapon2tigo: File to upload is small (34 bytes), uploading instead of streaming 2025/12/10 02:24:30 DEBUG : no_checksum_small_file_from_pipe: size = 34 OK 2025/12/10 02:24:30 DEBUG : no_checksum_small_file_from_pipe: md5 = 4c762bc6ec18f21b23fcae426c7863b5 OK 2025/12/10 02:24:30 DEBUG : no_checksum_small_file_from_pipe: Size and md5 of src and dst objects identical 2025/12/10 02:24:30 NOTICE: S3 bucket rclone-test-yenapon2tigo: Streaming uploads using chunk size 5Mi will have maximum file size of 48.828Gi 2025/12/10 02:24:30 DEBUG : no_checksum_big_file_from_pipe: open chunk writer: started multipart upload: Q5x77HiyRSOKX4Te9KDnx9OmKQAvuhxoI782ca4toghCe7n5IAnrojiKJbp8SZjRCSWQAvSBDCAWMdlo429JoZHVE4Du5O8jrp4cx4p20byARkerdayaj92S45axfdP_ 2025/12/10 02:24:30 DEBUG : no_checksum_big_file_from_pipe: multipart upload: starting chunk 0 size 100.001Ki offset 0/off 2025/12/10 02:24:30 DEBUG : no_checksum_big_file_from_pipe: multipart upload wrote chunk 1 with 102401 bytes and etag "fffc7956ba9a7b58a63c01b6ce1ddc45" 2025/12/10 02:24:30 DEBUG : no_checksum_big_file_from_pipe: multipart upload "Q5x77HiyRSOKX4Te9KDnx9OmKQAvuhxoI782ca4toghCe7n5IAnrojiKJbp8SZjRCSWQAvSBDCAWMdlo429JoZHVE4Du5O8jrp4cx4p20byARkerdayaj92S45axfdP_" finished 2025/12/10 02:24:31 DEBUG : no_checksum_big_file_from_pipe: Multipart upload Etag: bbeee02c608c6e85736b35e536fba719-1 OK 2025/12/10 02:24:31 DEBUG : no_checksum_big_file_from_pipe: size = 102401 OK 2025/12/10 02:24:31 DEBUG : no_checksum_big_file_from_pipe: Dst hash empty - aborting Src hash check 2025/12/10 02:24:31 DEBUG : no_checksum_big_file_from_pipe: Size of src and dst objects identical === RUN TestRcat/withChecksum=true,ignoreChecksum=false run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" 2025/12/10 02:24:31 DEBUG : S3 bucket rclone-test-yenapon2tigo: File to upload is small (34 bytes), uploading instead of streaming 2025/12/10 02:24:31 DEBUG : with_checksum_small_file_from_pipe: size = 34 OK 2025/12/10 02:24:31 DEBUG : with_checksum_small_file_from_pipe: md5 = 4c762bc6ec18f21b23fcae426c7863b5 OK 2025/12/10 02:24:31 DEBUG : with_checksum_small_file_from_pipe: Size and md5 of src and dst objects identical 2025/12/10 02:24:31 DEBUG : with_checksum_big_file_from_pipe: open chunk writer: started multipart upload: 1sTMCIc64KBbAn0QSiVKObDrV53eluVYJ3r5owsAB1XPXVc2YAhXoe1epz0Bh3hUtRFb1zCDXOH_jeM2Ncir0IEsxo7o0V6GzTDaJ08cuxYHFtgcUsEbat9ncBAW5iQl 2025/12/10 02:24:31 DEBUG : with_checksum_big_file_from_pipe: multipart upload: starting chunk 0 size 100.001Ki offset 0/off 2025/12/10 02:24:31 DEBUG : with_checksum_big_file_from_pipe: multipart upload wrote chunk 1 with 102401 bytes and etag "fffc7956ba9a7b58a63c01b6ce1ddc45" 2025/12/10 02:24:31 DEBUG : with_checksum_big_file_from_pipe: multipart upload "1sTMCIc64KBbAn0QSiVKObDrV53eluVYJ3r5owsAB1XPXVc2YAhXoe1epz0Bh3hUtRFb1zCDXOH_jeM2Ncir0IEsxo7o0V6GzTDaJ08cuxYHFtgcUsEbat9ncBAW5iQl" finished 2025/12/10 02:24:31 DEBUG : with_checksum_big_file_from_pipe: Multipart upload Etag: bbeee02c608c6e85736b35e536fba719-1 OK 2025/12/10 02:24:31 DEBUG : with_checksum_big_file_from_pipe: size = 102401 OK 2025/12/10 02:24:31 DEBUG : with_checksum_big_file_from_pipe: Dst hash empty - aborting Src hash check 2025/12/10 02:24:31 DEBUG : with_checksum_big_file_from_pipe: Size of src and dst objects identical === RUN TestRcat/withChecksum=false,ignoreChecksum=true run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" 2025/12/10 02:24:32 DEBUG : S3 bucket rclone-test-yenapon2tigo: File to upload is small (34 bytes), uploading instead of streaming 2025/12/10 02:24:32 DEBUG : ignore_checksum_small_file_from_pipe: size = 34 OK 2025/12/10 02:24:32 DEBUG : ignore_checksum_small_file_from_pipe: Size and modification time the same (differ by 0s, within tolerance 1ns) 2025/12/10 02:24:32 DEBUG : ignore_checksum_big_file_from_pipe: open chunk writer: started multipart upload: Om04QMbD.SJV6gU4sGi2IdiGOlDSXrG_AlyHmBSsB_DmVCb_abjIKTZgvOJhUqXlph0k74L0n5XDv1vTJiAtfE_k17HVkqLLQ9IBf8XMONCWtrRlRIPIVvtgBkK9tRO4 2025/12/10 02:24:32 DEBUG : ignore_checksum_big_file_from_pipe: multipart upload: starting chunk 0 size 100.001Ki offset 0/off 2025/12/10 02:24:32 DEBUG : ignore_checksum_big_file_from_pipe: multipart upload wrote chunk 1 with 102401 bytes and etag "fffc7956ba9a7b58a63c01b6ce1ddc45" 2025/12/10 02:24:32 DEBUG : ignore_checksum_big_file_from_pipe: multipart upload "Om04QMbD.SJV6gU4sGi2IdiGOlDSXrG_AlyHmBSsB_DmVCb_abjIKTZgvOJhUqXlph0k74L0n5XDv1vTJiAtfE_k17HVkqLLQ9IBf8XMONCWtrRlRIPIVvtgBkK9tRO4" finished 2025/12/10 02:24:32 DEBUG : ignore_checksum_big_file_from_pipe: Multipart upload Etag: bbeee02c608c6e85736b35e536fba719-1 OK 2025/12/10 02:24:32 DEBUG : ignore_checksum_big_file_from_pipe: size = 102401 OK 2025/12/10 02:24:32 DEBUG : ignore_checksum_big_file_from_pipe: Size and modification time the same (differ by 0s, within tolerance 1ns) === RUN TestRcat/withChecksum=true,ignoreChecksum=true run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" 2025/12/10 02:24:33 DEBUG : S3 bucket rclone-test-yenapon2tigo: File to upload is small (34 bytes), uploading instead of streaming 2025/12/10 02:24:33 DEBUG : ignore_checksum_small_file_from_pipe: size = 34 OK 2025/12/10 02:24:33 DEBUG : ignore_checksum_small_file_from_pipe: Src hash empty - aborting Dst hash check 2025/12/10 02:24:33 DEBUG : ignore_checksum_small_file_from_pipe: Size of src and dst objects identical 2025/12/10 02:24:33 DEBUG : ignore_checksum_big_file_from_pipe: open chunk writer: started multipart upload: 0LFwuDhhILqk1VPivGLOjguysoLsq8D2wEvmJF36Y.HjYfd3L_XJZrw8K4rh9tCP.sQy2YCa8HJpNUB0kGjdt.8sW.ZJnQOf2K9Ef5DEbts5tuTXOYPj4Zyd.lRgrwaZ 2025/12/10 02:24:33 DEBUG : ignore_checksum_big_file_from_pipe: multipart upload: starting chunk 0 size 100.001Ki offset 0/off 2025/12/10 02:24:33 DEBUG : ignore_checksum_big_file_from_pipe: multipart upload wrote chunk 1 with 102401 bytes and etag "fffc7956ba9a7b58a63c01b6ce1ddc45" 2025/12/10 02:24:33 DEBUG : ignore_checksum_big_file_from_pipe: multipart upload "0LFwuDhhILqk1VPivGLOjguysoLsq8D2wEvmJF36Y.HjYfd3L_XJZrw8K4rh9tCP.sQy2YCa8HJpNUB0kGjdt.8sW.ZJnQOf2K9Ef5DEbts5tuTXOYPj4Zyd.lRgrwaZ" finished 2025/12/10 02:24:33 DEBUG : ignore_checksum_big_file_from_pipe: Multipart upload Etag: bbeee02c608c6e85736b35e536fba719-1 OK 2025/12/10 02:24:33 DEBUG : ignore_checksum_big_file_from_pipe: size = 102401 OK 2025/12/10 02:24:33 DEBUG : ignore_checksum_big_file_from_pipe: Dst hash empty - aborting Src hash check 2025/12/10 02:24:33 DEBUG : ignore_checksum_big_file_from_pipe: Src hash empty - aborting Dst hash check 2025/12/10 02:24:33 DEBUG : ignore_checksum_big_file_from_pipe: Size of src and dst objects identical --- PASS: TestRcat (3.62s) --- PASS: TestRcat/withChecksum=false,ignoreChecksum=false (1.00s) --- PASS: TestRcat/withChecksum=true,ignoreChecksum=false (0.85s) --- PASS: TestRcat/withChecksum=false,ignoreChecksum=true (0.91s) --- PASS: TestRcat/withChecksum=true,ignoreChecksum=true (0.86s) === RUN TestRcatMetadata run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" === RUN TestRcatMetadata/Normal 2025/12/10 02:24:34 DEBUG : S3 bucket rclone-test-yenapon2tigo: File to upload is small (48 bytes), uploading instead of streaming 2025/12/10 02:24:34 DEBUG : rcat_metadata: size = 48 OK 2025/12/10 02:24:34 DEBUG : rcat_metadata: md5 = dee10c33b9fe5e2ac4eb8ad8467b7063 OK 2025/12/10 02:24:34 DEBUG : rcat_metadata: Size and md5 of src and dst objects identical === RUN TestRcatMetadata/ViaDisk 2025/12/10 02:24:34 DEBUG : rcat_metadata_uploadcutoff0: open chunk writer: started multipart upload: J_DHrrRH6cH0kRMh7GUlmcAYaojf1P7Xk6BwOhqpWCJhHnViOjUjUN8hdXyvirHwHTNfwz9AI.EXLOp_jr3FxY6JNaFdzOp9co2HXrQZpcJ_EWwzWQDzKwZD3jMxb5g0 2025/12/10 02:24:34 DEBUG : rcat_metadata_uploadcutoff0: multipart upload: starting chunk 0 size 63 offset 0/off 2025/12/10 02:24:34 DEBUG : rcat_metadata_uploadcutoff0: multipart upload wrote chunk 1 with 63 bytes and etag "51ca8560f35b9b87370a65d72356b86c" 2025/12/10 02:24:34 DEBUG : rcat_metadata_uploadcutoff0: multipart upload "J_DHrrRH6cH0kRMh7GUlmcAYaojf1P7Xk6BwOhqpWCJhHnViOjUjUN8hdXyvirHwHTNfwz9AI.EXLOp_jr3FxY6JNaFdzOp9co2HXrQZpcJ_EWwzWQDzKwZD3jMxb5g0" finished 2025/12/10 02:24:34 DEBUG : rcat_metadata_uploadcutoff0: Multipart upload Etag: ed80e8f4a79a14666b4280dc1353888f-1 OK 2025/12/10 02:24:34 DEBUG : rcat_metadata_uploadcutoff0: size = 63 OK 2025/12/10 02:24:34 DEBUG : rcat_metadata_uploadcutoff0: Dst hash empty - aborting Src hash check 2025/12/10 02:24:34 DEBUG : rcat_metadata_uploadcutoff0: Size of src and dst objects identical --- PASS: TestRcatMetadata (1.03s) --- PASS: TestRcatMetadata/Normal (0.35s) --- PASS: TestRcatMetadata/ViaDisk (0.58s) === RUN TestRcatSize run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" 2025/12/10 02:24:35 DEBUG : S3 bucket rclone-test-yenapon2tigo: File to upload is small (60 bytes), uploading instead of streaming 2025/12/10 02:24:35 DEBUG : potato2: size = 60 OK 2025/12/10 02:24:35 DEBUG : potato2: md5 = d6548b156ea68a4e003e786df99eee76 OK 2025/12/10 02:24:35 DEBUG : potato2: Size and md5 of src and dst objects identical --- PASS: TestRcatSize (0.56s) === RUN TestRcatSizeMetadata run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" 2025/12/10 02:24:35 DEBUG : S3 bucket rclone-test-yenapon2tigo: File to upload is small (60 bytes), uploading instead of streaming 2025/12/10 02:24:35 DEBUG : potato2: size = 60 OK 2025/12/10 02:24:35 DEBUG : potato2: md5 = d6548b156ea68a4e003e786df99eee76 OK 2025/12/10 02:24:35 DEBUG : potato2: Size and md5 of src and dst objects identical --- PASS: TestRcatSizeMetadata (0.68s) === RUN TestTouchDir run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" 2025/12/10 02:24:36 DEBUG : S3 bucket rclone-test-yenapon2tigo: Touching "sub dir/potato3" 2025/12/10 02:24:36 DEBUG : S3 bucket rclone-test-yenapon2tigo: Touching "empty space" 2025/12/10 02:24:36 DEBUG : S3 bucket rclone-test-yenapon2tigo: Touching "potato2" --- PASS: TestTouchDir (1.22s) === RUN TestMkdirMetadata run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" operations_test.go:1711: Skipping test as remote does not support MkdirMetadata --- SKIP: TestMkdirMetadata (0.10s) === RUN TestMkdirModTime run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" operations_test.go:1730: Skipping test as remote does not support DirSetModTime or MkdirMetadata --- SKIP: TestMkdirModTime (0.10s) === RUN TestCopyDirMetadata run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" operations_test.go:1751: Skipping test as remote does not support WriteDirMetadata or MkdirMetadata --- SKIP: TestCopyDirMetadata (0.10s) === RUN TestSetDirModTime run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" operations_test.go:1787: Skipping test as remote does not support DirSetModTime or WriteDirSetModTime --- SKIP: TestSetDirModTime (0.10s) === RUN TestDirsEqual run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" operations_test.go:1831: Skipping test as remote does not support WriteDirMetadata or MkdirMetadata --- SKIP: TestDirsEqual (0.09s) === RUN TestRemoveExisting run.go:185: Remote "S3 bucket rclone-test-yenapon2tigo", Local "Local file system at /tmp/rclone4119116075", Modify Window "1ns" operations_test.go:1900: Skipping as remote can't Move --- SKIP: TestRemoveExisting (0.10s) === RUN TestRcAbout rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcAbout (0.00s) === RUN TestRcCleanup rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcCleanup (0.00s) === RUN TestRcCopyfile rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcCopyfile (0.00s) === RUN TestRcCopyurl rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcCopyurl (0.00s) === RUN TestRcDelete rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcDelete (0.00s) === RUN TestRcDeletefile rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcDeletefile (0.00s) === RUN TestRcList rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcList (0.00s) === RUN TestRcStat rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcStat (0.00s) === RUN TestRcSetTier rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcSetTier (0.00s) === RUN TestRcSetTierFile rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcSetTierFile (0.00s) === RUN TestRcMkdir rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcMkdir (0.00s) === RUN TestRcMovefile rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcMovefile (0.00s) === RUN TestRcPurge rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcPurge (0.00s) === RUN TestRcRmdir rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcRmdir (0.00s) === RUN TestRcRmdirs rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcRmdirs (0.00s) === RUN TestRcSize rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcSize (0.00s) === RUN TestRcPublicLink rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcPublicLink (0.00s) === RUN TestRcFsInfo rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcFsInfo (0.00s) === RUN TestUploadFile rc_test.go:30: Skipping test on non local remote --- SKIP: TestUploadFile (0.00s) === RUN TestRcCommand rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcCommand (0.00s) === RUN TestRcDu rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcDu (0.00s) === RUN TestRcCheck rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcCheck (0.00s) === RUN TestRcHashsum rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcHashsum (0.00s) === RUN TestRcHashsumFile rc_test.go:30: Skipping test on non local remote --- SKIP: TestRcHashsumFile (0.00s) PASS 2025/12/10 02:24:38 DEBUG : S3 bucket rclone-test-yenapon2tigo: Purge remote 2025/12/10 02:24:38 DEBUG : S3 bucket rclone-test-yenapon2tigo: bucket is versioned: false 2025/12/10 02:24:38 DEBUG : Waiting for deletions to finish 2025/12/10 02:24:38 INFO : S3 bucket rclone-test-yenapon2tigo: Bucket "rclone-test-yenapon2tigo" deleted "./operations.test -test.v -test.timeout 1h0m0s -remote TestS3: -verbose" - Finished OK in 1m50.083556426s (try 1/5)