"./vfs.test -test.v -test.timeout 1h0m0s -remote TestPikPak: -verbose -test.run '^TestReadFileHandleReadAt$'" - Starting (try 5/5)
2025/09/14 03:41:03 DEBUG : Creating backend with remote "TestPikPak:rclone-test-womayaj9bihe"
2025/09/14 03:41:03 DEBUG : Using config file from "/home/rclone/.rclone.conf"
2025/09/14 03:41:04 DEBUG : Creating backend with remote "/tmp/rclone3636092782"
=== RUN   TestReadFileHandleReadAt
    run.go:180: Remote "PikPak root 'rclone-test-womayaj9bihe'", Local "Local file system at /tmp/rclone3636092782", Modify Window "876000h0m0s"
2025/09/14 03:41:04 INFO  : PikPak root 'rclone-test-womayaj9bihe': poll-interval is not supported by this remote
2025/09/14 03:41:04 NOTICE: PikPak root 'rclone-test-womayaj9bihe': --vfs-cache-mode writes or full is recommended for this remote as it can't stream
2025/09/14 03:41:06 DEBUG : dir/file1: calculating gcid: failed to unwrap object from src: dir/file1
2025/09/14 03:41:06 DEBUG : dir/file1: gcid = 75291f3a188a427f873fb88fbc37ce5ce150d01c
2025/09/14 03:41:08 DEBUG : dir/file1: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx
2025/09/14 03:41:09 DEBUG : dir/file1: Open: flags=O_RDONLY
2025/09/14 03:41:09 DEBUG : dir/file1: >Open: fd=dir/file1 (r), err=<nil>
2025/09/14 03:41:09 DEBUG : dir/file1: >OpenFile: fd=dir/file1 (r), err=<nil>
2025/09/14 03:41:09 DEBUG : dir/file1: ChunkedReader.openRange at 0 length 134217728
2025/09/14 03:41:15 DEBUG : pacer: low level retry 1/10 (error no link)
2025/09/14 03:41:15 DEBUG : pacer: Rate limited, increasing sleep to 200ms
2025/09/14 03:41:16 DEBUG : pacer: Reducing sleep to 150ms
2025/09/14 03:41:17 DEBUG : pacer: Reducing sleep to 112.5ms
2025/09/14 03:41:17 DEBUG : dir/file1: ChunkedReader.Read at 0 length 1 chunkOffset 0 chunkSize 134217728
2025/09/14 03:41:17 DEBUG : dir/file1: waiting for in-sequence read to 5 for 20ms
2025/09/14 03:41:17 DEBUG : dir/file1: aborting in-sequence read wait, off=5
2025/09/14 03:41:17 DEBUG : dir/file1: failed to wait for in-sequence read to 5
2025/09/14 03:41:17 DEBUG : dir/file1: ReadFileHandle.seek from 1 to 5 (fs.RangeSeeker)
2025/09/14 03:41:17 DEBUG : dir/file1: ChunkedReader.RangeSeek from 1 to 5 length -1
2025/09/14 03:41:17 DEBUG : dir/file1: ChunkedReader.Read at -1 length 1 chunkOffset 5 chunkSize 134217728
2025/09/14 03:41:17 DEBUG : dir/file1: ChunkedReader.openRange at 5 length 134217728
2025/09/14 03:41:18 DEBUG : pacer: Reducing sleep to 100ms
2025/09/14 03:41:18 DEBUG : dir/file1: ReadFileHandle.seek from 6 to 1 (fs.RangeSeeker)
2025/09/14 03:41:18 DEBUG : dir/file1: ChunkedReader.RangeSeek from 6 to 1 length -1
2025/09/14 03:41:18 DEBUG : dir/file1: ChunkedReader.Read at -1 length 1 chunkOffset 1 chunkSize 134217728
2025/09/14 03:41:18 DEBUG : dir/file1: ChunkedReader.openRange at 1 length 134217728
2025/09/14 03:41:19 DEBUG : dir/file1: waiting for in-sequence read to 10 for 20ms
2025/09/14 03:41:19 DEBUG : dir/file1: aborting in-sequence read wait, off=10
2025/09/14 03:41:19 DEBUG : dir/file1: failed to wait for in-sequence read to 10
2025/09/14 03:41:19 DEBUG : dir/file1: ReadFileHandle.seek from 2 to 10 (fs.RangeSeeker)
2025/09/14 03:41:19 DEBUG : dir/file1: ChunkedReader.RangeSeek from 2 to 10 length -1
2025/09/14 03:41:19 DEBUG : dir/file1: ChunkedReader.Read at -1 length 6 chunkOffset 10 chunkSize 134217728
2025/09/14 03:41:19 DEBUG : dir/file1: ChunkedReader.openRange at 10 length 134217728
2025/09/14 03:41:20 DEBUG : dir/file1: ReadFileHandle.seek from 16 to 10 (fs.RangeSeeker)
2025/09/14 03:41:20 DEBUG : dir/file1: ChunkedReader.RangeSeek from 16 to 10 length -1
2025/09/14 03:41:20 DEBUG : dir/file1: ChunkedReader.Read at -1 length 256 chunkOffset 10 chunkSize 134217728
2025/09/14 03:41:20 DEBUG : dir/file1: ChunkedReader.openRange at 10 length 134217728
2025/09/14 03:41:21 DEBUG : dir/file1: waiting for in-sequence read to 100 for 20ms
2025/09/14 03:41:21 DEBUG : dir/file1: aborting in-sequence read wait, off=100
2025/09/14 03:41:21 DEBUG : dir/file1: failed to wait for in-sequence read to 100
2025/09/14 03:41:21 DEBUG : dir/file1: ReadFileHandle.Read attempt to read beyond end of file: 100 > 16
2025/09/14 03:41:21 DEBUG : dir/file1: waiting for in-sequence read to 100 for 20ms
2025/09/14 03:41:21 DEBUG : dir/file1: aborting in-sequence read wait, off=100
2025/09/14 03:41:21 DEBUG : dir/file1: failed to wait for in-sequence read to 100
2025/09/14 03:41:21 ERROR : dir/file1: ReadFileHandle.Read error: Bad file descriptor
2025/09/14 03:41:21 DEBUG : WaitForWriters: timeout=30s
2025/09/14 03:41:21 DEBUG : dir: Looking for writers
2025/09/14 03:41:21 DEBUG : file1: reading active writers
2025/09/14 03:41:21 DEBUG : Looking for writers
2025/09/14 03:41:21 DEBUG : dir: reading active writers
2025/09/14 03:41:21 DEBUG : >WaitForWriters: 
2025/09/14 03:41:23 DEBUG : dir: Rmdir: contains trashed file: "file1"
--- PASS: TestReadFileHandleReadAt (19.67s)
PASS
2025/09/14 03:41:24 DEBUG : PikPak root 'rclone-test-womayaj9bihe': Purge remote
"./vfs.test -test.v -test.timeout 1h0m0s -remote TestPikPak: -verbose -test.run '^TestReadFileHandleReadAt$'" - Finished OK in 22.201842113s (try 5/5)