"./vfs.test -test.v -test.timeout 1h0m0s -remote TestPikPak: -verbose -test.run '^(TestFileOpenRead|TestReadFileHandleReadAt|TestUnicodeNormalization)$'" - Starting (try 2/5)
2025/09/13 02:10:08 DEBUG : Creating backend with remote "TestPikPak:rclone-test-varasij2jega"
2025/09/13 02:10:08 DEBUG : Using config file from "/home/rclone/.rclone.conf"
2025/09/13 02:10:10 DEBUG : Creating backend with remote "/tmp/rclone1394221316"
=== RUN   TestFileOpenRead
    run.go:180: Remote "PikPak root 'rclone-test-varasij2jega'", Local "Local file system at /tmp/rclone1394221316", Modify Window "876000h0m0s"
2025/09/13 02:10:10 INFO  : PikPak root 'rclone-test-varasij2jega': poll-interval is not supported by this remote
2025/09/13 02:10:10 NOTICE: PikPak root 'rclone-test-varasij2jega': --vfs-cache-mode writes or full is recommended for this remote as it can't stream
2025/09/13 02:10:11 DEBUG : dir/file1: calculating gcid: failed to unwrap object from src: dir/file1
2025/09/13 02:10:11 DEBUG : dir/file1: gcid = 3823e2b83a3ba8d1137efc1fe13e3a2e7cfb8d82
2025/09/13 02:10:13 DEBUG : dir/file1: Open: flags=O_RDONLY
2025/09/13 02:10:13 DEBUG : dir/file1: >Open: fd=dir/file1 (r), err=<nil>
2025/09/13 02:10:13 DEBUG : dir/file1: ChunkedReader.openRange at 0 length 134217728
2025/09/13 02:10:15 DEBUG : dir/file1: ChunkedReader.Read at 0 length 512 chunkOffset 0 chunkSize 134217728
2025/09/13 02:10:15 DEBUG : WaitForWriters: timeout=30s
2025/09/13 02:10:15 DEBUG : dir: Looking for writers
2025/09/13 02:10:15 DEBUG : file1: reading active writers
2025/09/13 02:10:15 DEBUG : Looking for writers
2025/09/13 02:10:15 DEBUG : dir: reading active writers
2025/09/13 02:10:15 DEBUG : >WaitForWriters: 
2025/09/13 02:10:17 DEBUG : dir: Rmdir: contains trashed file: "file1"
--- PASS: TestFileOpenRead (8.59s)
=== RUN   TestReadFileHandleReadAt
    run.go:180: Remote "PikPak root 'rclone-test-varasij2jega'", Local "Local file system at /tmp/rclone1394221316", Modify Window "876000h0m0s"
2025/09/13 02:10:18 INFO  : PikPak root 'rclone-test-varasij2jega': poll-interval is not supported by this remote
2025/09/13 02:10:18 NOTICE: PikPak root 'rclone-test-varasij2jega': --vfs-cache-mode writes or full is recommended for this remote as it can't stream
2025/09/13 02:10:20 DEBUG : dir/file1: calculating gcid: failed to unwrap object from src: dir/file1
2025/09/13 02:10:20 DEBUG : dir/file1: gcid = 75291f3a188a427f873fb88fbc37ce5ce150d01c
2025/09/13 02:10:21 DEBUG : dir/file1: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx
2025/09/13 02:10:21 DEBUG : dir/file1: Open: flags=O_RDONLY
2025/09/13 02:10:21 DEBUG : dir/file1: >Open: fd=dir/file1 (r), err=<nil>
2025/09/13 02:10:21 DEBUG : dir/file1: >OpenFile: fd=dir/file1 (r), err=<nil>
2025/09/13 02:10:21 DEBUG : dir/file1: ChunkedReader.openRange at 0 length 134217728
2025/09/13 02:10:28 DEBUG : pacer: low level retry 1/10 (error no link)
2025/09/13 02:10:28 DEBUG : pacer: Rate limited, increasing sleep to 200ms
2025/09/13 02:10:34 DEBUG : pacer: low level retry 2/10 (error no link)
2025/09/13 02:10:34 DEBUG : pacer: Rate limited, increasing sleep to 400ms
2025/09/13 02:10:34 DEBUG : pacer: Reducing sleep to 300ms
2025/09/13 02:10:35 DEBUG : pacer: Reducing sleep to 225ms
2025/09/13 02:10:35 DEBUG : dir/file1: ChunkedReader.Read at 0 length 1 chunkOffset 0 chunkSize 134217728
2025/09/13 02:10:35 DEBUG : dir/file1: waiting for in-sequence read to 5 for 20ms
2025/09/13 02:10:35 DEBUG : dir/file1: aborting in-sequence read wait, off=5
2025/09/13 02:10:35 DEBUG : dir/file1: failed to wait for in-sequence read to 5
2025/09/13 02:10:35 DEBUG : dir/file1: ReadFileHandle.seek from 1 to 5 (fs.RangeSeeker)
2025/09/13 02:10:35 DEBUG : dir/file1: ChunkedReader.RangeSeek from 1 to 5 length -1
2025/09/13 02:10:35 DEBUG : dir/file1: ChunkedReader.Read at -1 length 1 chunkOffset 5 chunkSize 134217728
2025/09/13 02:10:35 DEBUG : dir/file1: ChunkedReader.openRange at 5 length 134217728
2025/09/13 02:10:36 DEBUG : pacer: Reducing sleep to 168.75ms
2025/09/13 02:10:36 DEBUG : dir/file1: ReadFileHandle.seek from 6 to 1 (fs.RangeSeeker)
2025/09/13 02:10:36 DEBUG : dir/file1: ChunkedReader.RangeSeek from 6 to 1 length -1
2025/09/13 02:10:36 DEBUG : dir/file1: ChunkedReader.Read at -1 length 1 chunkOffset 1 chunkSize 134217728
2025/09/13 02:10:36 DEBUG : dir/file1: ChunkedReader.openRange at 1 length 134217728
2025/09/13 02:10:37 DEBUG : pacer: Reducing sleep to 126.5625ms
2025/09/13 02:10:37 DEBUG : dir/file1: waiting for in-sequence read to 10 for 20ms
2025/09/13 02:10:37 DEBUG : dir/file1: aborting in-sequence read wait, off=10
2025/09/13 02:10:37 DEBUG : dir/file1: failed to wait for in-sequence read to 10
2025/09/13 02:10:37 DEBUG : dir/file1: ReadFileHandle.seek from 2 to 10 (fs.RangeSeeker)
2025/09/13 02:10:37 DEBUG : dir/file1: ChunkedReader.RangeSeek from 2 to 10 length -1
2025/09/13 02:10:37 DEBUG : dir/file1: ChunkedReader.Read at -1 length 6 chunkOffset 10 chunkSize 134217728
2025/09/13 02:10:37 DEBUG : dir/file1: ChunkedReader.openRange at 10 length 134217728
2025/09/13 02:10:38 DEBUG : pacer: Reducing sleep to 100ms
2025/09/13 02:10:38 DEBUG : dir/file1: ReadFileHandle.seek from 16 to 10 (fs.RangeSeeker)
2025/09/13 02:10:38 DEBUG : dir/file1: ChunkedReader.RangeSeek from 16 to 10 length -1
2025/09/13 02:10:38 DEBUG : dir/file1: ChunkedReader.Read at -1 length 256 chunkOffset 10 chunkSize 134217728
2025/09/13 02:10:38 DEBUG : dir/file1: ChunkedReader.openRange at 10 length 134217728
2025/09/13 02:10:38 DEBUG : dir/file1: waiting for in-sequence read to 100 for 20ms
2025/09/13 02:10:38 DEBUG : dir/file1: aborting in-sequence read wait, off=100
2025/09/13 02:10:38 DEBUG : dir/file1: failed to wait for in-sequence read to 100
2025/09/13 02:10:38 DEBUG : dir/file1: ReadFileHandle.Read attempt to read beyond end of file: 100 > 16
2025/09/13 02:10:38 DEBUG : dir/file1: waiting for in-sequence read to 100 for 20ms
2025/09/13 02:10:38 DEBUG : dir/file1: aborting in-sequence read wait, off=100
2025/09/13 02:10:38 DEBUG : dir/file1: failed to wait for in-sequence read to 100
2025/09/13 02:10:38 ERROR : dir/file1: ReadFileHandle.Read error: Bad file descriptor
2025/09/13 02:10:38 DEBUG : WaitForWriters: timeout=30s
2025/09/13 02:10:38 DEBUG : dir: Looking for writers
2025/09/13 02:10:38 DEBUG : file1: reading active writers
2025/09/13 02:10:38 DEBUG : Looking for writers
2025/09/13 02:10:38 DEBUG : dir: reading active writers
2025/09/13 02:10:38 DEBUG : >WaitForWriters: 
2025/09/13 02:10:41 DEBUG : dir: Rmdir: contains trashed file: "file1"
--- PASS: TestReadFileHandleReadAt (23.49s)
=== RUN   TestUnicodeNormalization
    run.go:180: Remote "PikPak root 'rclone-test-varasij2jega'", Local "Local file system at /tmp/rclone1394221316", Modify Window "876000h0m0s"
2025/09/13 02:10:42 DEBUG : normal name with no special characters.txt: calculating gcid: failed to unwrap object from src: normal name with no special characters.txt
2025/09/13 02:10:42 DEBUG : normal name with no special characters.txt: gcid = ed1267439bbc430e2a3c002a4a39ac8869a858d5
2025/09/13 02:10:44 DEBUG : 測試_Русский___ě_áñ: calculating gcid: failed to unwrap object from src: 測試_Русский___ě_áñ
2025/09/13 02:10:44 DEBUG : 測試_Русский___ě_áñ: gcid = c0a8962153624d521cfc28e9e9437c2a7ddddffd
2025/09/13 02:10:45 INFO  : PikPak root 'rclone-test-varasij2jega': poll-interval is not supported by this remote
2025/09/13 02:10:45 NOTICE: PikPak root 'rclone-test-varasij2jega': --vfs-cache-mode writes or full is recommended for this remote as it can't stream
2025/09/13 02:10:45 DEBUG : normal name with no special characters.txt: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx
2025/09/13 02:10:46 DEBUG : normal name with no special characters.txt: Open: flags=O_RDONLY
2025/09/13 02:10:46 DEBUG : normal name with no special characters.txt: >Open: fd=normal name with no special characters.txt (r), err=<nil>
2025/09/13 02:10:46 DEBUG : normal name with no special characters.txt: >OpenFile: fd=normal name with no special characters.txt (r), err=<nil>
2025/09/13 02:10:46 DEBUG : normal name with no special characters.txt: ChunkedReader.openRange at 0 length 134217728
2025/09/13 02:10:52 DEBUG : pacer: low level retry 1/10 (error no link)
2025/09/13 02:10:52 DEBUG : pacer: Rate limited, increasing sleep to 200ms
2025/09/13 02:10:58 DEBUG : pacer: low level retry 2/10 (error no link)
2025/09/13 02:10:58 DEBUG : pacer: Rate limited, increasing sleep to 400ms
2025/09/13 02:11:05 DEBUG : pacer: low level retry 3/10 (error no link)
2025/09/13 02:11:05 DEBUG : pacer: Rate limited, increasing sleep to 800ms
2025/09/13 02:11:06 DEBUG : pacer: Reducing sleep to 600ms
2025/09/13 02:11:07 DEBUG : pacer: Reducing sleep to 450ms
2025/09/13 02:11:07 DEBUG : normal name with no special characters.txt: ChunkedReader.Read at 0 length 5 chunkOffset 0 chunkSize 134217728
2025/09/13 02:11:07 DEBUG : 測試_Русский___ě_áñ: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx
2025/09/13 02:11:07 DEBUG : 測試_Русский___ě_áñ: Open: flags=O_RDONLY
2025/09/13 02:11:07 DEBUG : 測試_Русский___ě_áñ: >Open: fd=測試_Русский___ě_áñ (r), err=<nil>
2025/09/13 02:11:07 DEBUG : 測試_Русский___ě_áñ: >OpenFile: fd=測試_Русский___ě_áñ (r), err=<nil>
2025/09/13 02:11:07 DEBUG : 測試_Русский___ě_áñ: ChunkedReader.openRange at 0 length 134217728
2025/09/13 02:11:13 DEBUG : pacer: low level retry 1/10 (error no link)
2025/09/13 02:11:13 DEBUG : pacer: Rate limited, increasing sleep to 900ms
2025/09/13 02:11:19 DEBUG : pacer: low level retry 2/10 (error no link)
2025/09/13 02:11:19 DEBUG : pacer: Rate limited, increasing sleep to 1.8s
2025/09/13 02:11:26 DEBUG : pacer: low level retry 3/10 (error no link)
2025/09/13 02:11:26 DEBUG : pacer: Rate limited, increasing sleep to 2s
2025/09/13 02:11:32 DEBUG : pacer: low level retry 4/10 (error no link)
2025/09/13 02:11:38 DEBUG : pacer: low level retry 5/10 (error no link)
2025/09/13 02:11:45 DEBUG : pacer: low level retry 6/10 (error no link)
2025/09/13 02:11:51 DEBUG : pacer: low level retry 7/10 (error no link)
2025/09/13 02:11:57 DEBUG : pacer: low level retry 8/10 (error no link)
2025/09/13 02:11:58 DEBUG : pacer: Reducing sleep to 1.5s
2025/09/13 02:12:00 DEBUG : pacer: Reducing sleep to 1.125s
2025/09/13 02:12:00 DEBUG : 測試_Русский___ě_áñ: ChunkedReader.Read at 0 length 5 chunkOffset 0 chunkSize 134217728
2025/09/13 02:12:00 DEBUG : normal name with no special characters.txt: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx
2025/09/13 02:12:00 DEBUG : normal name with no special characters.txt: Open: flags=O_RDONLY
2025/09/13 02:12:00 DEBUG : normal name with no special characters.txt: >Open: fd=normal name with no special characters.txt (r), err=<nil>
2025/09/13 02:12:00 DEBUG : normal name with no special characters.txt: >OpenFile: fd=normal name with no special characters.txt (r), err=<nil>
2025/09/13 02:12:00 DEBUG : normal name with no special characters.txt: ChunkedReader.openRange at 0 length 134217728
2025/09/13 02:12:01 DEBUG : pacer: Reducing sleep to 843.75ms
2025/09/13 02:12:01 DEBUG : normal name with no special characters.txt: ChunkedReader.Read at 0 length 5 chunkOffset 0 chunkSize 134217728
2025/09/13 02:12:01 DEBUG : 測試_Русский___ě_áñ: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx
2025/09/13 02:12:01 DEBUG : 測試_Русский___ě_áñ: >OpenFile: fd=<nil>, err=file does not exist
2025/09/13 02:12:01 DEBUG : WaitForWriters: timeout=30s
2025/09/13 02:12:01 DEBUG : Looking for writers
2025/09/13 02:12:01 DEBUG : normal name with no special characters.txt: reading active writers
2025/09/13 02:12:01 DEBUG : 測試_Русский___ě_áñ: reading active writers
2025/09/13 02:12:01 DEBUG : >WaitForWriters: 
2025/09/13 02:12:02 DEBUG : pacer: Reducing sleep to 632.8125ms
2025/09/13 02:12:03 DEBUG : pacer: Reducing sleep to 474.609375ms
2025/09/13 02:12:04 DEBUG : pacer: Reducing sleep to 355.957031ms
2025/09/13 02:12:04 DEBUG : pacer: Reducing sleep to 266.967773ms
2025/09/13 02:12:05 DEBUG : pacer: Reducing sleep to 200.225829ms
2025/09/13 02:12:05 DEBUG : pacer: Reducing sleep to 150.169371ms
--- PASS: TestUnicodeNormalization (83.39s)
PASS
2025/09/13 02:12:05 DEBUG : PikPak root 'rclone-test-varasij2jega': Purge remote
2025/09/13 02:12:06 DEBUG : pacer: Reducing sleep to 112.627028ms
2025/09/13 02:12:06 DEBUG : pacer: Reducing sleep to 100ms
"./vfs.test -test.v -test.timeout 1h0m0s -remote TestPikPak: -verbose -test.run '^(TestFileOpenRead|TestReadFileHandleReadAt|TestUnicodeNormalization)$'" - Finished OK in 1m57.985436111s (try 2/5)