"./vfs.test -test.v -test.timeout 1h0m0s -remote TestHiDrive: -verbose -test.run '^(TestReadFileHandleReadAt|TestVFSRename)$'" - Starting (try 2/5)
2025/09/03 01:55:27 DEBUG : Creating backend with remote "TestHiDrive:rclone-test-wofosur2yoji"
2025/09/03 01:55:27 DEBUG : Using config file from "/home/rclone/.rclone.conf"
2025/09/03 01:55:27 DEBUG : Creating backend with remote "/tmp/rclone1439606114"
=== RUN   TestReadFileHandleReadAt
    run.go:180: Remote "HiDrive root 'rclone-test-wofosur2yoji'", Local "Local file system at /tmp/rclone1439606114", Modify Window "1s"
2025/09/03 01:55:27 INFO  : HiDrive root 'rclone-test-wofosur2yoji': poll-interval is not supported by this remote
2025/09/03 01:55:27 DEBUG : HiDrive root 'rclone-test-wofosur2yoji': found directory-element with name dir
2025/09/03 01:55:27 DEBUG : HiDrive root 'rclone-test-wofosur2yoji': found directory-element with name file1
2025/09/03 01:55:27 DEBUG : dir/file1: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx
2025/09/03 01:55:27 DEBUG : HiDrive root 'rclone-test-wofosur2yoji': found directory-element with name dir
2025/09/03 01:55:27 DEBUG : HiDrive root 'rclone-test-wofosur2yoji': found directory-element with name file1
2025/09/03 01:55:27 DEBUG : dir/file1: Open: flags=O_RDONLY
2025/09/03 01:55:27 DEBUG : dir/file1: >Open: fd=dir/file1 (r), err=<nil>
2025/09/03 01:55:27 DEBUG : dir/file1: >OpenFile: fd=dir/file1 (r), err=<nil>
2025/09/03 01:55:27 DEBUG : dir/file1: ChunkedReader.openRange at 0 length 134217728
2025/09/03 01:55:27 DEBUG : dir/file1: ChunkedReader.Read at 0 length 1 chunkOffset 0 chunkSize 134217728
2025/09/03 01:55:27 DEBUG : dir/file1: waiting for in-sequence read to 5 for 20ms
2025/09/03 01:55:27 DEBUG : dir/file1: aborting in-sequence read wait, off=5
2025/09/03 01:55:27 DEBUG : dir/file1: failed to wait for in-sequence read to 5
2025/09/03 01:55:27 DEBUG : dir/file1: ReadFileHandle.seek from 1 to 5 (fs.RangeSeeker)
2025/09/03 01:55:27 DEBUG : dir/file1: ChunkedReader.RangeSeek from 1 to 5 length -1
2025/09/03 01:55:27 DEBUG : dir/file1: ChunkedReader.Read at -1 length 1 chunkOffset 5 chunkSize 134217728
2025/09/03 01:55:27 DEBUG : dir/file1: ChunkedReader.openRange at 5 length 134217728
2025/09/03 01:55:27 DEBUG : dir/file1: ReadFileHandle.seek from 6 to 1 (fs.RangeSeeker)
2025/09/03 01:55:27 DEBUG : dir/file1: ChunkedReader.RangeSeek from 6 to 1 length -1
2025/09/03 01:55:27 DEBUG : dir/file1: ChunkedReader.Read at -1 length 1 chunkOffset 1 chunkSize 134217728
2025/09/03 01:55:27 DEBUG : dir/file1: ChunkedReader.openRange at 1 length 134217728
2025/09/03 01:55:28 DEBUG : dir/file1: waiting for in-sequence read to 10 for 20ms
2025/09/03 01:55:28 DEBUG : dir/file1: aborting in-sequence read wait, off=10
2025/09/03 01:55:28 DEBUG : dir/file1: failed to wait for in-sequence read to 10
2025/09/03 01:55:28 DEBUG : dir/file1: ReadFileHandle.seek from 2 to 10 (fs.RangeSeeker)
2025/09/03 01:55:28 DEBUG : dir/file1: ChunkedReader.RangeSeek from 2 to 10 length -1
2025/09/03 01:55:28 DEBUG : dir/file1: ChunkedReader.Read at -1 length 6 chunkOffset 10 chunkSize 134217728
2025/09/03 01:55:28 DEBUG : dir/file1: ChunkedReader.openRange at 10 length 134217728
2025/09/03 01:55:28 DEBUG : dir/file1: ReadFileHandle.seek from 16 to 10 (fs.RangeSeeker)
2025/09/03 01:55:28 DEBUG : dir/file1: ChunkedReader.RangeSeek from 16 to 10 length -1
2025/09/03 01:55:28 DEBUG : dir/file1: ChunkedReader.Read at -1 length 256 chunkOffset 10 chunkSize 134217728
2025/09/03 01:55:28 DEBUG : dir/file1: ChunkedReader.openRange at 10 length 134217728
2025/09/03 01:55:28 DEBUG : dir/file1: waiting for in-sequence read to 100 for 20ms
2025/09/03 01:55:28 DEBUG : dir/file1: aborting in-sequence read wait, off=100
2025/09/03 01:55:28 DEBUG : dir/file1: failed to wait for in-sequence read to 100
2025/09/03 01:55:28 DEBUG : dir/file1: ReadFileHandle.Read attempt to read beyond end of file: 100 > 16
2025/09/03 01:55:28 DEBUG : dir/file1: waiting for in-sequence read to 100 for 20ms
2025/09/03 01:55:28 DEBUG : dir/file1: aborting in-sequence read wait, off=100
2025/09/03 01:55:28 DEBUG : dir/file1: failed to wait for in-sequence read to 100
2025/09/03 01:55:28 ERROR : dir/file1: ReadFileHandle.Read error: Bad file descriptor
2025/09/03 01:55:28 DEBUG : WaitForWriters: timeout=30s
2025/09/03 01:55:28 DEBUG : dir: Looking for writers
2025/09/03 01:55:28 DEBUG : file1: reading active writers
2025/09/03 01:55:28 DEBUG : Looking for writers
2025/09/03 01:55:28 DEBUG : dir: reading active writers
2025/09/03 01:55:28 DEBUG : >WaitForWriters: 
2025/09/03 01:55:28 DEBUG : HiDrive root 'rclone-test-wofosur2yoji': found directory-element with name dir
2025/09/03 01:55:28 DEBUG : HiDrive root 'rclone-test-wofosur2yoji': found directory-element with name file1
--- PASS: TestReadFileHandleReadAt (1.13s)
=== RUN   TestVFSRename
    run.go:180: Remote "HiDrive root 'rclone-test-wofosur2yoji'", Local "Local file system at /tmp/rclone1439606114", Modify Window "1s"
2025/09/03 01:55:28 INFO  : HiDrive root 'rclone-test-wofosur2yoji': poll-interval is not supported by this remote
2025/09/03 01:55:28 DEBUG : HiDrive root 'rclone-test-wofosur2yoji': found directory-element with name dir
2025/09/03 01:55:28 DEBUG : HiDrive root 'rclone-test-wofosur2yoji': found directory-element with name file2
2025/09/03 01:55:28 DEBUG : HiDrive root 'rclone-test-wofosur2yoji': found directory-element with name dir
2025/09/03 01:55:28 DEBUG : HiDrive root 'rclone-test-wofosur2yoji': found directory-element with name file2
2025/09/03 01:55:28 INFO  : dir/file2: Moved (server-side) to: dir/file1
2025/09/03 01:55:28 DEBUG : dir/file1: Updating file with dir/file1 0xc0001ab5c0
2025/09/03 01:55:28 DEBUG : dir: Added virtual directory entry vDel: "file2"
2025/09/03 01:55:28 DEBUG : dir: Added virtual directory entry vAddFile: "file1"
2025/09/03 01:55:28 DEBUG : HiDrive root 'rclone-test-wofosur2yoji': found directory-element with name dir
2025/09/03 01:55:28 DEBUG : HiDrive root 'rclone-test-wofosur2yoji': found directory-element with name file1
2025/09/03 01:55:29 INFO  : dir/file1: Moved (server-side) to: file0
2025/09/03 01:55:29 DEBUG : file0: Updating file with file0 0xc0001ab5c0
2025/09/03 01:55:29 DEBUG : dir: Added virtual directory entry vDel: "file1"
2025/09/03 01:55:29 DEBUG : Added virtual directory entry vAddFile: "file0"
2025/09/03 01:55:29 DEBUG : HiDrive root 'rclone-test-wofosur2yoji': found directory-element with name dir
2025/09/03 01:55:29 DEBUG : HiDrive root 'rclone-test-wofosur2yoji': found directory-element with name file0
2025/09/03 01:55:29 DEBUG : WaitForWriters: timeout=30s
2025/09/03 01:55:29 DEBUG : dir: Looking for writers
2025/09/03 01:55:29 DEBUG : Looking for writers
2025/09/03 01:55:29 DEBUG : dir: reading active writers
2025/09/03 01:55:29 DEBUG : file0: reading active writers
2025/09/03 01:55:29 DEBUG : >WaitForWriters: 
2025/09/03 01:55:29 DEBUG : HiDrive root 'rclone-test-wofosur2yoji': found directory-element with name dir
2025/09/03 01:55:29 DEBUG : HiDrive root 'rclone-test-wofosur2yoji': found directory-element with name file0
--- PASS: TestVFSRename (0.91s)
PASS
2025/09/03 01:55:29 DEBUG : HiDrive root 'rclone-test-wofosur2yoji': Purge remote
"./vfs.test -test.v -test.timeout 1h0m0s -remote TestHiDrive: -verbose -test.run '^(TestReadFileHandleReadAt|TestVFSRename)$'" - Finished OK in 2.296240602s (try 2/5)