"./vfs.test -test.v -test.timeout 1h0m0s -remote TestPikPak: -verbose -test.run '^TestReadFileHandleFlush$'" - Starting (try 3/5)
2025/08/14 02:45:12 DEBUG : Creating backend with remote "TestPikPak:rclone-test-buzepiv1pohe"
2025/08/14 02:45:12 DEBUG : Using config file from "/home/rclone/.rclone.conf"
2025/08/14 02:45:14 DEBUG : Creating backend with remote "/tmp/rclone2799306656"
=== RUN   TestReadFileHandleFlush
    run.go:180: Remote "PikPak root 'rclone-test-buzepiv1pohe'", Local "Local file system at /tmp/rclone2799306656", Modify Window "876000h0m0s"
2025/08/14 02:45:14 INFO  : PikPak root 'rclone-test-buzepiv1pohe': poll-interval is not supported by this remote
2025/08/14 02:45:14 NOTICE: PikPak root 'rclone-test-buzepiv1pohe': --vfs-cache-mode writes or full is recommended for this remote as it can't stream
2025/08/14 02:45:15 DEBUG : dir/file1: calculating gcid: failed to unwrap object from src: dir/file1
2025/08/14 02:45:15 DEBUG : dir/file1: gcid = 75291f3a188a427f873fb88fbc37ce5ce150d01c
2025/08/14 02:45:17 DEBUG : dir/file1: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx
2025/08/14 02:45:18 DEBUG : dir/file1: Open: flags=O_RDONLY
2025/08/14 02:45:18 DEBUG : dir/file1: >Open: fd=dir/file1 (r), err=<nil>
2025/08/14 02:45:18 DEBUG : dir/file1: >OpenFile: fd=dir/file1 (r), err=<nil>
2025/08/14 02:45:18 DEBUG : dir/file1: ChunkedReader.openRange at 0 length 134217728
2025/08/14 02:45:24 DEBUG : pacer: low level retry 1/10 (error no link)
2025/08/14 02:45:24 DEBUG : pacer: Rate limited, increasing sleep to 200ms
2025/08/14 02:45:31 DEBUG : pacer: low level retry 2/10 (error no link)
2025/08/14 02:45:31 DEBUG : pacer: Rate limited, increasing sleep to 400ms
2025/08/14 02:45:37 DEBUG : pacer: low level retry 3/10 (error no link)
2025/08/14 02:45:37 DEBUG : pacer: Rate limited, increasing sleep to 800ms
2025/08/14 02:45:43 DEBUG : pacer: low level retry 4/10 (error no link)
2025/08/14 02:45:43 DEBUG : pacer: Rate limited, increasing sleep to 1.6s
2025/08/14 02:45:50 DEBUG : pacer: low level retry 5/10 (error no link)
2025/08/14 02:45:50 DEBUG : pacer: Rate limited, increasing sleep to 2s
2025/08/14 02:45:56 DEBUG : pacer: low level retry 6/10 (error no link)
2025/08/14 02:46:02 DEBUG : pacer: low level retry 7/10 (error no link)
2025/08/14 02:46:09 DEBUG : pacer: low level retry 8/10 (error no link)
2025/08/14 02:46:09 DEBUG : pacer: Reducing sleep to 1.5s
2025/08/14 02:46:12 DEBUG : pacer: Reducing sleep to 1.125s
2025/08/14 02:46:12 DEBUG : dir/file1: ChunkedReader.Read at 0 length 256 chunkOffset 0 chunkSize 134217728
2025/08/14 02:46:12 DEBUG : WaitForWriters: timeout=30s
2025/08/14 02:46:12 DEBUG : dir: Looking for writers
2025/08/14 02:46:12 DEBUG : file1: reading active writers
2025/08/14 02:46:12 DEBUG : Looking for writers
2025/08/14 02:46:12 DEBUG : dir: reading active writers
2025/08/14 02:46:12 DEBUG : >WaitForWriters: 
2025/08/14 02:46:13 DEBUG : pacer: Reducing sleep to 843.75ms
2025/08/14 02:46:14 DEBUG : pacer: Reducing sleep to 632.8125ms
2025/08/14 02:46:15 DEBUG : pacer: Reducing sleep to 474.609375ms
2025/08/14 02:46:15 DEBUG : pacer: Reducing sleep to 355.957031ms
2025/08/14 02:46:16 DEBUG : pacer: Reducing sleep to 266.967773ms
2025/08/14 02:46:16 DEBUG : dir: Rmdir: contains trashed file: "file1"
2025/08/14 02:46:16 DEBUG : pacer: Reducing sleep to 200.225829ms
2025/08/14 02:46:17 DEBUG : pacer: Reducing sleep to 150.169371ms
2025/08/14 02:46:17 DEBUG : pacer: Reducing sleep to 112.627028ms
--- PASS: TestReadFileHandleFlush (63.35s)
PASS
2025/08/14 02:46:17 DEBUG : PikPak root 'rclone-test-buzepiv1pohe': Purge remote
2025/08/14 02:46:18 DEBUG : pacer: Reducing sleep to 100ms
"./vfs.test -test.v -test.timeout 1h0m0s -remote TestPikPak: -verbose -test.run '^TestReadFileHandleFlush$'" - Finished OK in 1m6.306073257s (try 3/5)