"./vfs.test -test.v -test.timeout 1h0m0s -remote TestPikPak: -verbose -test.run '^(TestCaseSensitivity|TestReadFileHandleFlush|TestReadFileHandleMethods|TestReadFileHandleRelease|TestReadFileHandleSeek)$'" - Starting (try 2/5)
2025/08/14 02:40:39 DEBUG : Creating backend with remote "TestPikPak:rclone-test-fumesos5pusi"
2025/08/14 02:40:39 DEBUG : Using config file from "/home/rclone/.rclone.conf"
2025/08/14 02:40:40 DEBUG : Creating backend with remote "/tmp/rclone2310491587"
=== RUN   TestReadFileHandleMethods
    run.go:180: Remote "PikPak root 'rclone-test-fumesos5pusi'", Local "Local file system at /tmp/rclone2310491587", Modify Window "876000h0m0s"
2025/08/14 02:40:40 INFO  : PikPak root 'rclone-test-fumesos5pusi': poll-interval is not supported by this remote
2025/08/14 02:40:40 NOTICE: PikPak root 'rclone-test-fumesos5pusi': --vfs-cache-mode writes or full is recommended for this remote as it can't stream
2025/08/14 02:40:42 DEBUG : dir/file1: calculating gcid: failed to unwrap object from src: dir/file1
2025/08/14 02:40:42 DEBUG : dir/file1: gcid = 75291f3a188a427f873fb88fbc37ce5ce150d01c
2025/08/14 02:40:44 DEBUG : dir/file1: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx
2025/08/14 02:40:45 DEBUG : dir/file1: Open: flags=O_RDONLY
2025/08/14 02:40:45 DEBUG : dir/file1: >Open: fd=dir/file1 (r), err=<nil>
2025/08/14 02:40:45 DEBUG : dir/file1: >OpenFile: fd=dir/file1 (r), err=<nil>
2025/08/14 02:40:45 DEBUG : dir/file1: ChunkedReader.openRange at 0 length 134217728
2025/08/14 02:40:51 DEBUG : pacer: low level retry 1/10 (error no link)
2025/08/14 02:40:51 DEBUG : pacer: Rate limited, increasing sleep to 200ms
2025/08/14 02:40:57 DEBUG : pacer: low level retry 2/10 (error no link)
2025/08/14 02:40:57 DEBUG : pacer: Rate limited, increasing sleep to 400ms
2025/08/14 02:40:58 DEBUG : pacer: Reducing sleep to 300ms
2025/08/14 02:40:59 DEBUG : pacer: Reducing sleep to 225ms
2025/08/14 02:40:59 DEBUG : dir/file1: ChunkedReader.Read at 0 length 1 chunkOffset 0 chunkSize 134217728
2025/08/14 02:40:59 DEBUG : dir/file1: ChunkedReader.Read at 1 length 256 chunkOffset 0 chunkSize 134217728
2025/08/14 02:40:59 DEBUG : WaitForWriters: timeout=30s
2025/08/14 02:40:59 DEBUG : dir: Looking for writers
2025/08/14 02:40:59 DEBUG : file1: reading active writers
2025/08/14 02:40:59 DEBUG : Looking for writers
2025/08/14 02:40:59 DEBUG : dir: reading active writers
2025/08/14 02:40:59 DEBUG : >WaitForWriters: 
2025/08/14 02:41:00 DEBUG : pacer: Reducing sleep to 168.75ms
2025/08/14 02:41:00 DEBUG : pacer: Reducing sleep to 126.5625ms
2025/08/14 02:41:00 DEBUG : pacer: Reducing sleep to 100ms
2025/08/14 02:41:01 DEBUG : dir: Rmdir: contains trashed file: "file1"
--- PASS: TestReadFileHandleMethods (22.44s)
=== RUN   TestReadFileHandleSeek
    run.go:180: Remote "PikPak root 'rclone-test-fumesos5pusi'", Local "Local file system at /tmp/rclone2310491587", Modify Window "876000h0m0s"
2025/08/14 02:41:03 INFO  : PikPak root 'rclone-test-fumesos5pusi': poll-interval is not supported by this remote
2025/08/14 02:41:03 NOTICE: PikPak root 'rclone-test-fumesos5pusi': --vfs-cache-mode writes or full is recommended for this remote as it can't stream
2025/08/14 02:41:04 DEBUG : dir/file1: calculating gcid: failed to unwrap object from src: dir/file1
2025/08/14 02:41:04 DEBUG : dir/file1: gcid = 75291f3a188a427f873fb88fbc37ce5ce150d01c
2025/08/14 02:41:06 DEBUG : dir/file1: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx
2025/08/14 02:41:06 DEBUG : dir/file1: Open: flags=O_RDONLY
2025/08/14 02:41:06 DEBUG : dir/file1: >Open: fd=dir/file1 (r), err=<nil>
2025/08/14 02:41:06 DEBUG : dir/file1: >OpenFile: fd=dir/file1 (r), err=<nil>
2025/08/14 02:41:06 DEBUG : dir/file1: ChunkedReader.openRange at 0 length 134217728
2025/08/14 02:41:13 DEBUG : pacer: low level retry 1/10 (error no link)
2025/08/14 02:41:13 DEBUG : pacer: Rate limited, increasing sleep to 200ms
2025/08/14 02:41:14 DEBUG : pacer: Reducing sleep to 150ms
2025/08/14 02:41:15 DEBUG : pacer: Reducing sleep to 112.5ms
2025/08/14 02:41:15 DEBUG : dir/file1: ChunkedReader.Read at 0 length 1 chunkOffset 0 chunkSize 134217728
2025/08/14 02:41:15 DEBUG : dir/file1: waiting for in-sequence read to 5 for 20ms
2025/08/14 02:41:15 DEBUG : dir/file1: aborting in-sequence read wait, off=5
2025/08/14 02:41:15 DEBUG : dir/file1: failed to wait for in-sequence read to 5
2025/08/14 02:41:15 DEBUG : dir/file1: ReadFileHandle.seek from 1 to 5 (fs.RangeSeeker)
2025/08/14 02:41:15 DEBUG : dir/file1: ChunkedReader.RangeSeek from 1 to 5 length -1
2025/08/14 02:41:15 DEBUG : dir/file1: ChunkedReader.Read at -1 length 1 chunkOffset 5 chunkSize 134217728
2025/08/14 02:41:15 DEBUG : dir/file1: ChunkedReader.openRange at 5 length 134217728
2025/08/14 02:41:16 DEBUG : pacer: Reducing sleep to 100ms
2025/08/14 02:41:16 DEBUG : dir/file1: ReadFileHandle.seek from 6 to 3 (fs.RangeSeeker)
2025/08/14 02:41:16 DEBUG : dir/file1: ChunkedReader.RangeSeek from 6 to 3 length -1
2025/08/14 02:41:16 DEBUG : dir/file1: ChunkedReader.Read at -1 length 1 chunkOffset 3 chunkSize 134217728
2025/08/14 02:41:16 DEBUG : dir/file1: ChunkedReader.openRange at 3 length 134217728
2025/08/14 02:41:18 DEBUG : dir/file1: ReadFileHandle.seek from 4 to 13 (fs.RangeSeeker)
2025/08/14 02:41:18 DEBUG : dir/file1: ChunkedReader.RangeSeek from 4 to 13 length -1
2025/08/14 02:41:18 DEBUG : dir/file1: ChunkedReader.Read at -1 length 1 chunkOffset 13 chunkSize 134217728
2025/08/14 02:41:18 DEBUG : dir/file1: ChunkedReader.openRange at 13 length 134217728
2025/08/14 02:41:19 DEBUG : WaitForWriters: timeout=30s
2025/08/14 02:41:19 DEBUG : dir: Looking for writers
2025/08/14 02:41:19 DEBUG : file1: reading active writers
2025/08/14 02:41:19 DEBUG : Looking for writers
2025/08/14 02:41:19 DEBUG : dir: reading active writers
2025/08/14 02:41:19 DEBUG : >WaitForWriters: 
2025/08/14 02:41:21 DEBUG : dir: Rmdir: contains trashed file: "file1"
--- PASS: TestReadFileHandleSeek (19.15s)
=== RUN   TestReadFileHandleFlush
    run.go:180: Remote "PikPak root 'rclone-test-fumesos5pusi'", Local "Local file system at /tmp/rclone2310491587", Modify Window "876000h0m0s"
2025/08/14 02:41:22 INFO  : PikPak root 'rclone-test-fumesos5pusi': poll-interval is not supported by this remote
2025/08/14 02:41:22 NOTICE: PikPak root 'rclone-test-fumesos5pusi': --vfs-cache-mode writes or full is recommended for this remote as it can't stream
2025/08/14 02:41:23 DEBUG : dir/file1: calculating gcid: failed to unwrap object from src: dir/file1
2025/08/14 02:41:23 DEBUG : dir/file1: gcid = 75291f3a188a427f873fb88fbc37ce5ce150d01c
2025/08/14 02:41:25 DEBUG : dir/file1: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx
2025/08/14 02:41:26 DEBUG : dir/file1: Open: flags=O_RDONLY
2025/08/14 02:41:26 DEBUG : dir/file1: >Open: fd=dir/file1 (r), err=<nil>
2025/08/14 02:41:26 DEBUG : dir/file1: >OpenFile: fd=dir/file1 (r), err=<nil>
2025/08/14 02:41:26 DEBUG : dir/file1: ChunkedReader.openRange at 0 length 134217728
2025/08/14 02:41:32 DEBUG : pacer: low level retry 1/10 (error no link)
2025/08/14 02:41:32 DEBUG : pacer: Rate limited, increasing sleep to 200ms
2025/08/14 02:41:38 DEBUG : pacer: low level retry 2/10 (error no link)
2025/08/14 02:41:38 DEBUG : pacer: Rate limited, increasing sleep to 400ms
2025/08/14 02:41:45 DEBUG : pacer: low level retry 3/10 (error no link)
2025/08/14 02:41:45 DEBUG : pacer: Rate limited, increasing sleep to 800ms
2025/08/14 02:41:51 DEBUG : pacer: low level retry 4/10 (error no link)
2025/08/14 02:41:51 DEBUG : pacer: Rate limited, increasing sleep to 1.6s
2025/08/14 02:41:57 DEBUG : pacer: low level retry 5/10 (error no link)
2025/08/14 02:41:57 DEBUG : pacer: Rate limited, increasing sleep to 2s
2025/08/14 02:42:04 DEBUG : pacer: low level retry 6/10 (error no link)
2025/08/14 02:42:10 DEBUG : pacer: low level retry 7/10 (error no link)
2025/08/14 02:42:16 DEBUG : pacer: low level retry 8/10 (error no link)
2025/08/14 02:42:23 DEBUG : pacer: low level retry 9/10 (error no link)
2025/08/14 02:42:29 DEBUG : pacer: low level retry 10/10 (error no link)
    read_test.go:192: 
        	Error Trace:	/home/rclone/go/src/github.com/rclone/rclone/vfs/read_test.go:192
        	Error:      	Not equal: 
        	            	expected: *errors.errorString(&errors.errorString{s:"EOF"})
        	            	actual  : *fmt.wrapError(&fmt.wrapError{msg:"can't download: no link", err:fserrors.wrappedRetryError{error:(*errors.errorString)(0xc000887150)}})
        	Test:       	TestReadFileHandleFlush
    read_test.go:193: 
        	Error Trace:	/home/rclone/go/src/github.com/rclone/rclone/vfs/read_test.go:193
        	Error:      	Not equal: 
        	            	expected: 16
        	            	actual  : 0
        	Test:       	TestReadFileHandleFlush
2025/08/14 02:42:29 DEBUG : WaitForWriters: timeout=30s
2025/08/14 02:42:29 DEBUG : dir: Looking for writers
2025/08/14 02:42:29 DEBUG : file1: reading active writers
2025/08/14 02:42:29 DEBUG : Looking for writers
2025/08/14 02:42:29 DEBUG : dir: reading active writers
2025/08/14 02:42:29 DEBUG : >WaitForWriters: 
2025/08/14 02:42:29 DEBUG : pacer: Reducing sleep to 1.5s
2025/08/14 02:42:31 DEBUG : pacer: Reducing sleep to 1.125s
2025/08/14 02:42:33 DEBUG : pacer: Reducing sleep to 843.75ms
2025/08/14 02:42:34 DEBUG : pacer: Reducing sleep to 632.8125ms
2025/08/14 02:42:35 DEBUG : pacer: Reducing sleep to 474.609375ms
2025/08/14 02:42:35 DEBUG : dir: Rmdir: contains trashed file: "file1"
2025/08/14 02:42:35 DEBUG : pacer: Reducing sleep to 355.957031ms
2025/08/14 02:42:36 DEBUG : pacer: Reducing sleep to 266.967773ms
2025/08/14 02:42:37 DEBUG : pacer: Reducing sleep to 200.225829ms
--- FAIL: TestReadFileHandleFlush (74.58s)
=== RUN   TestReadFileHandleRelease
    run.go:180: Remote "PikPak root 'rclone-test-fumesos5pusi'", Local "Local file system at /tmp/rclone2310491587", Modify Window "876000h0m0s"
2025/08/14 02:42:37 INFO  : PikPak root 'rclone-test-fumesos5pusi': poll-interval is not supported by this remote
2025/08/14 02:42:37 NOTICE: PikPak root 'rclone-test-fumesos5pusi': --vfs-cache-mode writes or full is recommended for this remote as it can't stream
2025/08/14 02:42:37 DEBUG : pacer: Reducing sleep to 150.169371ms
2025/08/14 02:42:37 DEBUG : pacer: Reducing sleep to 112.627028ms
2025/08/14 02:42:37 DEBUG : pacer: Reducing sleep to 100ms
2025/08/14 02:42:37 DEBUG : dir/file1: calculating gcid: failed to unwrap object from src: dir/file1
2025/08/14 02:42:37 DEBUG : dir/file1: gcid = 75291f3a188a427f873fb88fbc37ce5ce150d01c
2025/08/14 02:42:40 DEBUG : dir/file1: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx
2025/08/14 02:42:40 DEBUG : dir/file1: Open: flags=O_RDONLY
2025/08/14 02:42:40 DEBUG : dir/file1: >Open: fd=dir/file1 (r), err=<nil>
2025/08/14 02:42:40 DEBUG : dir/file1: >OpenFile: fd=dir/file1 (r), err=<nil>
2025/08/14 02:42:40 DEBUG : dir/file1: ChunkedReader.openRange at 0 length 134217728
2025/08/14 02:42:47 DEBUG : pacer: low level retry 1/10 (error no link)
2025/08/14 02:42:47 DEBUG : pacer: Rate limited, increasing sleep to 200ms
2025/08/14 02:42:53 DEBUG : pacer: low level retry 2/10 (error no link)
2025/08/14 02:42:53 DEBUG : pacer: Rate limited, increasing sleep to 400ms
2025/08/14 02:42:59 DEBUG : pacer: low level retry 3/10 (error no link)
2025/08/14 02:42:59 DEBUG : pacer: Rate limited, increasing sleep to 800ms
2025/08/14 02:43:00 DEBUG : pacer: Reducing sleep to 600ms
2025/08/14 02:43:01 DEBUG : pacer: Reducing sleep to 450ms
2025/08/14 02:43:01 DEBUG : dir/file1: ChunkedReader.Read at 0 length 256 chunkOffset 0 chunkSize 134217728
2025/08/14 02:43:01 DEBUG : dir/file1: ReadFileHandle.Release closing
2025/08/14 02:43:01 DEBUG : dir/file1: ReadFileHandle.Release nothing to do
2025/08/14 02:43:01 DEBUG : WaitForWriters: timeout=30s
2025/08/14 02:43:01 DEBUG : dir: Looking for writers
2025/08/14 02:43:01 DEBUG : file1: reading active writers
2025/08/14 02:43:01 DEBUG : Looking for writers
2025/08/14 02:43:01 DEBUG : dir: reading active writers
2025/08/14 02:43:01 DEBUG : >WaitForWriters: 
2025/08/14 02:43:01 DEBUG : pacer: Reducing sleep to 337.5ms
2025/08/14 02:43:02 DEBUG : pacer: Reducing sleep to 253.125ms
2025/08/14 02:43:02 DEBUG : pacer: Reducing sleep to 189.84375ms
2025/08/14 02:43:03 DEBUG : pacer: Reducing sleep to 142.382812ms
2025/08/14 02:43:03 DEBUG : pacer: Reducing sleep to 106.787109ms
2025/08/14 02:43:03 DEBUG : dir: Rmdir: contains trashed file: "file1"
2025/08/14 02:43:04 DEBUG : pacer: Reducing sleep to 100ms
--- PASS: TestReadFileHandleRelease (28.10s)
=== RUN   TestCaseSensitivity
    run.go:180: Remote "PikPak root 'rclone-test-fumesos5pusi'", Local "Local file system at /tmp/rclone2310491587", Modify Window "876000h0m0s"
2025/08/14 02:43:05 DEBUG : FiLeA: calculating gcid: failed to unwrap object from src: FiLeA
2025/08/14 02:43:05 DEBUG : FiLeA: gcid = ed1267439bbc430e2a3c002a4a39ac8869a858d5
2025/08/14 02:43:06 DEBUG : FiLeB: calculating gcid: failed to unwrap object from src: FiLeB
2025/08/14 02:43:06 DEBUG : FiLeB: gcid = c0a8962153624d521cfc28e9e9437c2a7ddddffd
2025/08/14 02:43:08 DEBUG : FilEb: calculating gcid: failed to unwrap object from src: FilEb
2025/08/14 02:43:08 DEBUG : FilEb: gcid = d9d37e3253e48da9b2bbbe117f2ddc5b8654d660
2025/08/14 02:43:09 INFO  : PikPak root 'rclone-test-fumesos5pusi': poll-interval is not supported by this remote
2025/08/14 02:43:09 NOTICE: PikPak root 'rclone-test-fumesos5pusi': --vfs-cache-mode writes or full is recommended for this remote as it can't stream
2025/08/14 02:43:09 INFO  : PikPak root 'rclone-test-fumesos5pusi': poll-interval is not supported by this remote
2025/08/14 02:43:09 NOTICE: PikPak root 'rclone-test-fumesos5pusi': --vfs-cache-mode writes or full is recommended for this remote as it can't stream
2025/08/14 02:43:09 DEBUG : FiLeA: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx
2025/08/14 02:43:09 DEBUG : FiLeA: Open: flags=O_RDONLY
2025/08/14 02:43:09 DEBUG : FiLeA: >Open: fd=FiLeA (r), err=<nil>
2025/08/14 02:43:09 DEBUG : FiLeA: >OpenFile: fd=FiLeA (r), err=<nil>
2025/08/14 02:43:09 DEBUG : FiLeA: ChunkedReader.openRange at 0 length 134217728
2025/08/14 02:43:16 DEBUG : pacer: low level retry 1/10 (error no link)
2025/08/14 02:43:16 DEBUG : pacer: Rate limited, increasing sleep to 200ms
2025/08/14 02:43:22 DEBUG : pacer: low level retry 2/10 (error no link)
2025/08/14 02:43:22 DEBUG : pacer: Rate limited, increasing sleep to 400ms
2025/08/14 02:43:28 DEBUG : pacer: low level retry 3/10 (error no link)
2025/08/14 02:43:28 DEBUG : pacer: Rate limited, increasing sleep to 800ms
2025/08/14 02:43:35 DEBUG : pacer: low level retry 4/10 (error no link)
2025/08/14 02:43:35 DEBUG : pacer: Rate limited, increasing sleep to 1.6s
2025/08/14 02:43:41 DEBUG : pacer: low level retry 5/10 (error no link)
2025/08/14 02:43:41 DEBUG : pacer: Rate limited, increasing sleep to 2s
2025/08/14 02:43:42 DEBUG : pacer: Reducing sleep to 1.5s
2025/08/14 02:43:44 DEBUG : pacer: Reducing sleep to 1.125s
2025/08/14 02:43:44 DEBUG : FiLeA: ChunkedReader.Read at 0 length 5 chunkOffset 0 chunkSize 134217728
2025/08/14 02:43:44 DEBUG : FiLeA: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx
2025/08/14 02:43:45 DEBUG : pacer: Reducing sleep to 843.75ms
2025/08/14 02:43:45 DEBUG : FiLeA: Open: flags=O_RDONLY
2025/08/14 02:43:45 DEBUG : FiLeA: >Open: fd=FiLeA (r), err=<nil>
2025/08/14 02:43:45 DEBUG : FiLeA: >OpenFile: fd=FiLeA (r), err=<nil>
2025/08/14 02:43:45 DEBUG : FiLeA: ChunkedReader.openRange at 0 length 134217728
2025/08/14 02:43:52 DEBUG : pacer: low level retry 1/10 (error no link)
2025/08/14 02:43:52 DEBUG : pacer: Rate limited, increasing sleep to 1.6875s
2025/08/14 02:43:58 DEBUG : pacer: low level retry 2/10 (error no link)
2025/08/14 02:43:58 DEBUG : pacer: Rate limited, increasing sleep to 2s
2025/08/14 02:44:05 DEBUG : pacer: low level retry 3/10 (error no link)
2025/08/14 02:44:11 DEBUG : pacer: low level retry 4/10 (error no link)
2025/08/14 02:44:17 DEBUG : pacer: low level retry 5/10 (error no link)
2025/08/14 02:44:18 DEBUG : pacer: Reducing sleep to 1.5s
2025/08/14 02:44:20 DEBUG : pacer: Reducing sleep to 1.125s
2025/08/14 02:44:20 DEBUG : FiLeA: ChunkedReader.Read at 0 length 5 chunkOffset 0 chunkSize 134217728
2025/08/14 02:44:20 DEBUG : FiLeA: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx
2025/08/14 02:44:20 DEBUG : FiLeA: Open: flags=O_RDONLY
2025/08/14 02:44:20 DEBUG : FiLeA: >Open: fd=FiLeA (r), err=<nil>
2025/08/14 02:44:20 DEBUG : FiLeA: >OpenFile: fd=FiLeA (r), err=<nil>
2025/08/14 02:44:20 DEBUG : FiLeA: ChunkedReader.openRange at 0 length 134217728
2025/08/14 02:44:21 DEBUG : pacer: Reducing sleep to 843.75ms
2025/08/14 02:44:21 DEBUG : FiLeA: ChunkedReader.Read at 0 length 5 chunkOffset 0 chunkSize 134217728
2025/08/14 02:44:21 DEBUG : FiLeB: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx
2025/08/14 02:44:21 DEBUG : FiLeB: Open: flags=O_RDONLY
2025/08/14 02:44:21 DEBUG : FiLeB: >Open: fd=FiLeB (r), err=<nil>
2025/08/14 02:44:21 DEBUG : FiLeB: >OpenFile: fd=FiLeB (r), err=<nil>
2025/08/14 02:44:21 DEBUG : FiLeB: ChunkedReader.openRange at 0 length 134217728
2025/08/14 02:44:28 DEBUG : pacer: low level retry 1/10 (error no link)
2025/08/14 02:44:28 DEBUG : pacer: Rate limited, increasing sleep to 1.6875s
2025/08/14 02:44:35 DEBUG : pacer: low level retry 2/10 (error no link)
2025/08/14 02:44:35 DEBUG : pacer: Rate limited, increasing sleep to 2s
2025/08/14 02:44:35 DEBUG : pacer: Reducing sleep to 1.5s
2025/08/14 02:44:38 DEBUG : pacer: Reducing sleep to 1.125s
2025/08/14 02:44:38 DEBUG : FiLeB: ChunkedReader.Read at 0 length 5 chunkOffset 0 chunkSize 134217728
2025/08/14 02:44:38 DEBUG : FilEb: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx
2025/08/14 02:44:38 DEBUG : FilEb: Open: flags=O_RDONLY
2025/08/14 02:44:38 DEBUG : FilEb: >Open: fd=FilEb (r), err=<nil>
2025/08/14 02:44:38 DEBUG : FilEb: >OpenFile: fd=FilEb (r), err=<nil>
2025/08/14 02:44:38 DEBUG : FilEb: ChunkedReader.openRange at 0 length 134217728
2025/08/14 02:44:39 DEBUG : pacer: Reducing sleep to 843.75ms
2025/08/14 02:44:40 DEBUG : pacer: Reducing sleep to 632.8125ms
2025/08/14 02:44:40 DEBUG : FilEb: ChunkedReader.Read at 0 length 5 chunkOffset 0 chunkSize 134217728
2025/08/14 02:44:41 DEBUG : pacer: Reducing sleep to 474.609375ms
2025/08/14 02:44:41 DEBUG : FiLeA: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx
2025/08/14 02:44:41 DEBUG : FiLeA: Open: flags=O_RDONLY
2025/08/14 02:44:41 DEBUG : FiLeA: >Open: fd=FiLeA (r), err=<nil>
2025/08/14 02:44:41 DEBUG : FiLeA: >OpenFile: fd=FiLeA (r), err=<nil>
2025/08/14 02:44:41 DEBUG : FiLeA: ChunkedReader.openRange at 0 length 134217728
2025/08/14 02:44:41 DEBUG : pacer: Reducing sleep to 355.957031ms
2025/08/14 02:44:41 DEBUG : FiLeA: ChunkedReader.Read at 0 length 5 chunkOffset 0 chunkSize 134217728
2025/08/14 02:44:41 DEBUG : fileA: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx
2025/08/14 02:44:41 DEBUG : FiLeA: Open: flags=O_RDONLY
2025/08/14 02:44:41 DEBUG : FiLeA: >Open: fd=FiLeA (r), err=<nil>
2025/08/14 02:44:41 DEBUG : fileA: >OpenFile: fd=FiLeA (r), err=<nil>
2025/08/14 02:44:41 DEBUG : FiLeA: ChunkedReader.openRange at 0 length 134217728
2025/08/14 02:44:42 DEBUG : pacer: Reducing sleep to 266.967773ms
2025/08/14 02:44:42 DEBUG : FiLeA: ChunkedReader.Read at 0 length 5 chunkOffset 0 chunkSize 134217728
2025/08/14 02:44:42 DEBUG : filea: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx
2025/08/14 02:44:42 DEBUG : FiLeA: Open: flags=O_RDONLY
2025/08/14 02:44:42 DEBUG : FiLeA: >Open: fd=FiLeA (r), err=<nil>
2025/08/14 02:44:42 DEBUG : filea: >OpenFile: fd=FiLeA (r), err=<nil>
2025/08/14 02:44:42 DEBUG : FiLeA: ChunkedReader.openRange at 0 length 134217728
2025/08/14 02:44:42 DEBUG : pacer: Reducing sleep to 200.225829ms
2025/08/14 02:44:42 DEBUG : FiLeA: ChunkedReader.Read at 0 length 5 chunkOffset 0 chunkSize 134217728
2025/08/14 02:44:42 DEBUG : FILEA: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx
2025/08/14 02:44:42 DEBUG : FiLeA: Open: flags=O_RDONLY
2025/08/14 02:44:42 DEBUG : FiLeA: >Open: fd=FiLeA (r), err=<nil>
2025/08/14 02:44:42 DEBUG : FILEA: >OpenFile: fd=FiLeA (r), err=<nil>
2025/08/14 02:44:42 DEBUG : FiLeA: ChunkedReader.openRange at 0 length 134217728
2025/08/14 02:44:42 DEBUG : pacer: Reducing sleep to 150.169371ms
2025/08/14 02:44:42 DEBUG : FiLeA: ChunkedReader.Read at 0 length 5 chunkOffset 0 chunkSize 134217728
2025/08/14 02:44:42 DEBUG : FiLeB: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx
2025/08/14 02:44:42 DEBUG : FiLeB: Open: flags=O_RDONLY
2025/08/14 02:44:42 DEBUG : FiLeB: >Open: fd=FiLeB (r), err=<nil>
2025/08/14 02:44:42 DEBUG : FiLeB: >OpenFile: fd=FiLeB (r), err=<nil>
2025/08/14 02:44:42 DEBUG : FiLeB: ChunkedReader.openRange at 0 length 134217728
2025/08/14 02:44:49 DEBUG : pacer: low level retry 1/10 (error no link)
2025/08/14 02:44:49 DEBUG : pacer: Rate limited, increasing sleep to 300.338742ms
2025/08/14 02:44:55 DEBUG : pacer: low level retry 2/10 (error no link)
2025/08/14 02:44:55 DEBUG : pacer: Rate limited, increasing sleep to 600.677484ms
2025/08/14 02:44:56 DEBUG : pacer: Reducing sleep to 450.508113ms
2025/08/14 02:44:57 DEBUG : pacer: Reducing sleep to 337.881084ms
2025/08/14 02:44:57 DEBUG : FiLeB: ChunkedReader.Read at 0 length 5 chunkOffset 0 chunkSize 134217728
2025/08/14 02:44:57 DEBUG : FilEb: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx
2025/08/14 02:44:57 DEBUG : FilEb: Open: flags=O_RDONLY
2025/08/14 02:44:57 DEBUG : FilEb: >Open: fd=FilEb (r), err=<nil>
2025/08/14 02:44:57 DEBUG : FilEb: >OpenFile: fd=FilEb (r), err=<nil>
2025/08/14 02:44:57 DEBUG : FilEb: ChunkedReader.openRange at 0 length 134217728
2025/08/14 02:45:03 DEBUG : pacer: low level retry 1/10 (error no link)
2025/08/14 02:45:03 DEBUG : pacer: Rate limited, increasing sleep to 675.762168ms
2025/08/14 02:45:05 DEBUG : Saving config "captcha_token" in section "TestPikPak" of the config file
2025/08/14 02:45:06 DEBUG : pacer: Reducing sleep to 506.821626ms
2025/08/14 02:45:06 DEBUG : pacer: Reducing sleep to 380.116219ms
2025/08/14 02:45:06 DEBUG : FilEb: ChunkedReader.Read at 0 length 5 chunkOffset 0 chunkSize 134217728
2025/08/14 02:45:06 DEBUG : fileb: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx
2025/08/14 02:45:06 ERROR : /: Dir.Stat error: duplicate filename "fileb" detected with case/unicode normalization settings
2025/08/14 02:45:06 DEBUG : fileb: >OpenFile: fd=<nil>, err=duplicate filename "fileb" detected with case/unicode normalization settings
2025/08/14 02:45:06 DEBUG : FILEB: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx
2025/08/14 02:45:06 ERROR : /: Dir.Stat error: duplicate filename "FILEB" detected with case/unicode normalization settings
2025/08/14 02:45:06 DEBUG : FILEB: >OpenFile: fd=<nil>, err=duplicate filename "FILEB" detected with case/unicode normalization settings
2025/08/14 02:45:06 DEBUG : FiLeA: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx
2025/08/14 02:45:06 DEBUG : FiLeA: Open: flags=O_RDONLY
2025/08/14 02:45:06 DEBUG : FiLeA: >Open: fd=FiLeA (r), err=<nil>
2025/08/14 02:45:06 DEBUG : FiLeA: >OpenFile: fd=FiLeA (r), err=<nil>
2025/08/14 02:45:06 DEBUG : FiLeA: ChunkedReader.openRange at 0 length 134217728
2025/08/14 02:45:07 DEBUG : pacer: Reducing sleep to 285.087164ms
2025/08/14 02:45:07 DEBUG : FiLeA: ChunkedReader.Read at 0 length 5 chunkOffset 0 chunkSize 134217728
2025/08/14 02:45:07 DEBUG : fileA: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx
2025/08/14 02:45:07 DEBUG : fileA: >OpenFile: fd=<nil>, err=file does not exist
2025/08/14 02:45:07 DEBUG : filea: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx
2025/08/14 02:45:07 DEBUG : filea: >OpenFile: fd=<nil>, err=file does not exist
2025/08/14 02:45:07 DEBUG : FILEA: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx
2025/08/14 02:45:07 DEBUG : FILEA: >OpenFile: fd=<nil>, err=file does not exist
2025/08/14 02:45:07 DEBUG : FiLeB: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx
2025/08/14 02:45:07 DEBUG : FiLeB: Open: flags=O_RDONLY
2025/08/14 02:45:07 DEBUG : FiLeB: >Open: fd=FiLeB (r), err=<nil>
2025/08/14 02:45:07 DEBUG : FiLeB: >OpenFile: fd=FiLeB (r), err=<nil>
2025/08/14 02:45:07 DEBUG : FiLeB: ChunkedReader.openRange at 0 length 134217728
2025/08/14 02:45:07 DEBUG : pacer: Reducing sleep to 213.815373ms
2025/08/14 02:45:07 DEBUG : FiLeB: ChunkedReader.Read at 0 length 5 chunkOffset 0 chunkSize 134217728
2025/08/14 02:45:07 DEBUG : FilEb: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx
2025/08/14 02:45:07 DEBUG : FilEb: Open: flags=O_RDONLY
2025/08/14 02:45:07 DEBUG : FilEb: >Open: fd=FilEb (r), err=<nil>
2025/08/14 02:45:07 DEBUG : FilEb: >OpenFile: fd=FilEb (r), err=<nil>
2025/08/14 02:45:07 DEBUG : FilEb: ChunkedReader.openRange at 0 length 134217728
2025/08/14 02:45:07 DEBUG : pacer: Reducing sleep to 160.361529ms
2025/08/14 02:45:07 DEBUG : FilEb: ChunkedReader.Read at 0 length 5 chunkOffset 0 chunkSize 134217728
2025/08/14 02:45:07 DEBUG : fileb: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx
2025/08/14 02:45:07 DEBUG : fileb: >OpenFile: fd=<nil>, err=file does not exist
2025/08/14 02:45:07 DEBUG : FILEB: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx
2025/08/14 02:45:07 DEBUG : FILEB: >OpenFile: fd=<nil>, err=file does not exist
2025/08/14 02:45:07 DEBUG : WaitForWriters: timeout=30s
2025/08/14 02:45:07 DEBUG : Looking for writers
2025/08/14 02:45:07 DEBUG : FiLeA: reading active writers
2025/08/14 02:45:07 DEBUG : FiLeB: reading active writers
2025/08/14 02:45:07 DEBUG : FilEb: reading active writers
2025/08/14 02:45:07 DEBUG : >WaitForWriters: 
2025/08/14 02:45:07 DEBUG : WaitForWriters: timeout=30s
2025/08/14 02:45:07 DEBUG : Looking for writers
2025/08/14 02:45:07 DEBUG : FiLeA: reading active writers
2025/08/14 02:45:07 DEBUG : FiLeB: reading active writers
2025/08/14 02:45:07 DEBUG : FilEb: reading active writers
2025/08/14 02:45:07 DEBUG : >WaitForWriters: 
2025/08/14 02:45:08 DEBUG : pacer: Reducing sleep to 120.271146ms
2025/08/14 02:45:08 DEBUG : pacer: Reducing sleep to 100ms
--- PASS: TestCaseSensitivity (126.43s)
FAIL
2025/08/14 02:45:11 DEBUG : PikPak root 'rclone-test-fumesos5pusi': Purge remote
"./vfs.test -test.v -test.timeout 1h0m0s -remote TestPikPak: -verbose -test.run '^(TestCaseSensitivity|TestReadFileHandleFlush|TestReadFileHandleMethods|TestReadFileHandleRelease|TestReadFileHandleSeek)$'" - Finished ERROR in 4m33.341851948s (try 2/5): exit status 1: Failed [TestReadFileHandleFlush]