"./vfs.test -test.v -test.timeout 1h0m0s -remote TestPikPak: -verbose -test.run '^(TestCaseSensitivity|TestFileReadAtNonZeroLength)$'" - Starting (try 4/5) 2025/08/06 23:23:05 DEBUG : Creating backend with remote "TestPikPak:rclone-test-migivun4yiga" 2025/08/06 23:23:05 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2025/08/06 23:23:07 DEBUG : Creating backend with remote "/tmp/rclone354687504" === RUN TestCaseSensitivity run.go:180: Remote "PikPak root 'rclone-test-migivun4yiga'", Local "Local file system at /tmp/rclone354687504", Modify Window "876000h0m0s" 2025/08/06 23:23:08 DEBUG : FiLeA: calculating gcid: failed to unwrap object from src: FiLeA 2025/08/06 23:23:08 DEBUG : FiLeA: gcid = ed1267439bbc430e2a3c002a4a39ac8869a858d5 2025/08/06 23:23:10 DEBUG : FiLeB: calculating gcid: failed to unwrap object from src: FiLeB 2025/08/06 23:23:10 DEBUG : FiLeB: gcid = c0a8962153624d521cfc28e9e9437c2a7ddddffd 2025/08/06 23:23:12 DEBUG : FilEb: calculating gcid: failed to unwrap object from src: FilEb 2025/08/06 23:23:12 DEBUG : FilEb: gcid = d9d37e3253e48da9b2bbbe117f2ddc5b8654d660 2025/08/06 23:23:13 INFO : PikPak root 'rclone-test-migivun4yiga': poll-interval is not supported by this remote 2025/08/06 23:23:13 NOTICE: PikPak root 'rclone-test-migivun4yiga': --vfs-cache-mode writes or full is recommended for this remote as it can't stream 2025/08/06 23:23:13 INFO : PikPak root 'rclone-test-migivun4yiga': poll-interval is not supported by this remote 2025/08/06 23:23:13 NOTICE: PikPak root 'rclone-test-migivun4yiga': --vfs-cache-mode writes or full is recommended for this remote as it can't stream 2025/08/06 23:23:13 DEBUG : FiLeA: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx 2025/08/06 23:23:13 DEBUG : FiLeA: Open: flags=O_RDONLY 2025/08/06 23:23:13 DEBUG : FiLeA: >Open: fd=FiLeA (r), err= 2025/08/06 23:23:13 DEBUG : FiLeA: >OpenFile: fd=FiLeA (r), err= 2025/08/06 23:23:13 DEBUG : FiLeA: ChunkedReader.openRange at 0 length 134217728 2025/08/06 23:23:20 DEBUG : pacer: low level retry 1/10 (error no link) 2025/08/06 23:23:20 DEBUG : pacer: Rate limited, increasing sleep to 200ms 2025/08/06 23:23:26 DEBUG : pacer: low level retry 2/10 (error no link) 2025/08/06 23:23:26 DEBUG : pacer: Rate limited, increasing sleep to 400ms 2025/08/06 23:23:27 DEBUG : pacer: Reducing sleep to 300ms 2025/08/06 23:23:28 DEBUG : pacer: Reducing sleep to 225ms 2025/08/06 23:23:28 DEBUG : FiLeA: ChunkedReader.Read at 0 length 5 chunkOffset 0 chunkSize 134217728 2025/08/06 23:23:28 DEBUG : FiLeA: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx 2025/08/06 23:23:28 DEBUG : pacer: Reducing sleep to 168.75ms 2025/08/06 23:23:28 DEBUG : FiLeA: Open: flags=O_RDONLY 2025/08/06 23:23:28 DEBUG : FiLeA: >Open: fd=FiLeA (r), err= 2025/08/06 23:23:28 DEBUG : FiLeA: >OpenFile: fd=FiLeA (r), err= 2025/08/06 23:23:28 DEBUG : FiLeA: ChunkedReader.openRange at 0 length 134217728 2025/08/06 23:23:35 DEBUG : pacer: low level retry 1/10 (error no link) 2025/08/06 23:23:35 DEBUG : pacer: Rate limited, increasing sleep to 337.5ms 2025/08/06 23:23:41 DEBUG : pacer: low level retry 2/10 (error no link) 2025/08/06 23:23:41 DEBUG : pacer: Rate limited, increasing sleep to 675ms 2025/08/06 23:23:47 DEBUG : pacer: low level retry 3/10 (error no link) 2025/08/06 23:23:47 DEBUG : pacer: Rate limited, increasing sleep to 1.35s 2025/08/06 23:23:54 DEBUG : pacer: low level retry 4/10 (error no link) 2025/08/06 23:23:54 DEBUG : pacer: Rate limited, increasing sleep to 2s 2025/08/06 23:23:55 DEBUG : Saving config "captcha_token" in section "TestPikPak" of the config file 2025/08/06 23:23:56 DEBUG : pacer: Reducing sleep to 1.5s 2025/08/06 23:23:57 DEBUG : pacer: Reducing sleep to 1.125s 2025/08/06 23:23:57 DEBUG : FiLeA: ChunkedReader.Read at 0 length 5 chunkOffset 0 chunkSize 134217728 2025/08/06 23:23:57 DEBUG : FiLeA: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx 2025/08/06 23:23:57 DEBUG : FiLeA: Open: flags=O_RDONLY 2025/08/06 23:23:57 DEBUG : FiLeA: >Open: fd=FiLeA (r), err= 2025/08/06 23:23:57 DEBUG : FiLeA: >OpenFile: fd=FiLeA (r), err= 2025/08/06 23:23:57 DEBUG : FiLeA: ChunkedReader.openRange at 0 length 134217728 2025/08/06 23:23:58 DEBUG : pacer: Reducing sleep to 843.75ms 2025/08/06 23:23:58 DEBUG : FiLeA: ChunkedReader.Read at 0 length 5 chunkOffset 0 chunkSize 134217728 2025/08/06 23:23:58 DEBUG : FiLeB: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx 2025/08/06 23:23:58 DEBUG : FiLeB: Open: flags=O_RDONLY 2025/08/06 23:23:58 DEBUG : FiLeB: >Open: fd=FiLeB (r), err= 2025/08/06 23:23:58 DEBUG : FiLeB: >OpenFile: fd=FiLeB (r), err= 2025/08/06 23:23:58 DEBUG : FiLeB: ChunkedReader.openRange at 0 length 134217728 2025/08/06 23:24:05 DEBUG : pacer: low level retry 1/10 (error no link) 2025/08/06 23:24:05 DEBUG : pacer: Rate limited, increasing sleep to 1.6875s 2025/08/06 23:24:11 DEBUG : pacer: low level retry 2/10 (error no link) 2025/08/06 23:24:11 DEBUG : pacer: Rate limited, increasing sleep to 2s 2025/08/06 23:24:17 DEBUG : pacer: low level retry 3/10 (error no link) 2025/08/06 23:24:24 DEBUG : pacer: low level retry 4/10 (error no link) 2025/08/06 23:24:30 DEBUG : pacer: low level retry 5/10 (error no link) 2025/08/06 23:24:36 DEBUG : pacer: low level retry 6/10 (error no link) 2025/08/06 23:24:43 DEBUG : pacer: low level retry 7/10 (error no link) 2025/08/06 23:24:49 DEBUG : pacer: low level retry 8/10 (error no link) 2025/08/06 23:24:55 DEBUG : pacer: low level retry 9/10 (error no link) 2025/08/06 23:25:02 DEBUG : pacer: low level retry 10/10 (error no link) 2025/08/06 23:25:02 DEBUG : FilEb: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx 2025/08/06 23:25:02 DEBUG : FilEb: Open: flags=O_RDONLY 2025/08/06 23:25:02 DEBUG : FilEb: >Open: fd=FilEb (r), err= 2025/08/06 23:25:02 DEBUG : FilEb: >OpenFile: fd=FilEb (r), err= 2025/08/06 23:25:02 DEBUG : FilEb: ChunkedReader.openRange at 0 length 134217728 2025/08/06 23:25:08 DEBUG : pacer: low level retry 1/10 (error no link) 2025/08/06 23:25:09 DEBUG : pacer: Reducing sleep to 1.5s 2025/08/06 23:25:11 DEBUG : pacer: Reducing sleep to 1.125s 2025/08/06 23:25:11 DEBUG : FilEb: ChunkedReader.Read at 0 length 5 chunkOffset 0 chunkSize 134217728 vfs_case_test.go:65: Can't test case sensitivity - this remote doesn't comply as case-sensitive 2025/08/06 23:25:11 DEBUG : WaitForWriters: timeout=30s 2025/08/06 23:25:11 DEBUG : Looking for writers 2025/08/06 23:25:11 DEBUG : FilEb: reading active writers 2025/08/06 23:25:11 DEBUG : FiLeA: reading active writers 2025/08/06 23:25:11 DEBUG : FiLeB: reading active writers 2025/08/06 23:25:11 DEBUG : >WaitForWriters: 2025/08/06 23:25:11 DEBUG : WaitForWriters: timeout=30s 2025/08/06 23:25:11 DEBUG : Looking for writers 2025/08/06 23:25:11 DEBUG : FiLeA: reading active writers 2025/08/06 23:25:11 DEBUG : FiLeB: reading active writers 2025/08/06 23:25:11 DEBUG : FilEb: reading active writers 2025/08/06 23:25:11 DEBUG : >WaitForWriters: 2025/08/06 23:25:12 DEBUG : pacer: Reducing sleep to 843.75ms 2025/08/06 23:25:13 DEBUG : pacer: Reducing sleep to 632.8125ms 2025/08/06 23:25:14 DEBUG : pacer: Reducing sleep to 474.609375ms 2025/08/06 23:25:14 DEBUG : pacer: Reducing sleep to 355.957031ms 2025/08/06 23:25:15 DEBUG : pacer: Reducing sleep to 266.967773ms 2025/08/06 23:25:16 DEBUG : pacer: Reducing sleep to 200.225829ms 2025/08/06 23:25:16 DEBUG : pacer: Reducing sleep to 150.169371ms 2025/08/06 23:25:17 DEBUG : pacer: Reducing sleep to 112.627028ms --- SKIP: TestCaseSensitivity (129.83s) === RUN TestFileReadAtNonZeroLength run.go:180: Remote "PikPak root 'rclone-test-migivun4yiga'", Local "Local file system at /tmp/rclone354687504", Modify Window "876000h0m0s" 2025/08/06 23:25:17 INFO : PikPak root 'rclone-test-migivun4yiga': poll-interval is not supported by this remote 2025/08/06 23:25:17 NOTICE: PikPak root 'rclone-test-migivun4yiga': --vfs-cache-mode writes or full is recommended for this remote as it can't stream 2025/08/06 23:25:17 DEBUG : file1: OpenFile: flags=O_WRONLY|O_CREATE, perm=-rwxrwxrwx 2025/08/06 23:25:17 DEBUG : pacer: Reducing sleep to 100ms 2025/08/06 23:25:17 DEBUG : file1: Open: flags=O_WRONLY|O_CREATE 2025/08/06 23:25:17 DEBUG : Added virtual directory entry vAddFile: "file1" 2025/08/06 23:25:17 DEBUG : file1: >Open: fd=file1 (w), err= 2025/08/06 23:25:17 DEBUG : file1: >OpenFile: fd=file1 (w), err= 2025/08/06 23:25:17 DEBUG : Added virtual directory entry vAddFile: "file1" 2025/08/06 23:25:17 DEBUG : PikPak root 'rclone-test-migivun4yiga': File to upload is small (100 bytes), uploading instead of streaming 2025/08/06 23:25:17 DEBUG : file1: calculating gcid: failed to unwrap object from src: file1 2025/08/06 23:25:17 DEBUG : file1: gcid = 7f9152423f1d702a3f537c3c7939477b4128777c 2025/08/06 23:25:20 DEBUG : file1: Dst hash empty - aborting Src hash check 2025/08/06 23:25:20 DEBUG : file1: Size of src and dst objects identical 2025/08/06 23:25:20 DEBUG : Added virtual directory entry vAddFile: "file1" 2025/08/06 23:25:20 DEBUG : file1: OpenFile: flags=O_RDONLY, perm=---------- 2025/08/06 23:25:20 DEBUG : file1: Open: flags=O_RDONLY 2025/08/06 23:25:20 DEBUG : file1: >Open: fd=file1 (r), err= 2025/08/06 23:25:20 DEBUG : file1: >OpenFile: fd=file1 (r), err= 2025/08/06 23:25:20 DEBUG : file1: ChunkedReader.openRange at 0 length 134217728 2025/08/06 23:25:25 DEBUG : pacer: low level retry 1/10 (error no link) 2025/08/06 23:25:25 DEBUG : pacer: Rate limited, increasing sleep to 200ms 2025/08/06 23:25:30 DEBUG : pacer: low level retry 2/10 (error no link) 2025/08/06 23:25:30 DEBUG : pacer: Rate limited, increasing sleep to 400ms 2025/08/06 23:25:36 DEBUG : pacer: low level retry 3/10 (error no link) 2025/08/06 23:25:36 DEBUG : pacer: Rate limited, increasing sleep to 800ms 2025/08/06 23:25:41 DEBUG : pacer: low level retry 4/10 (error no link) 2025/08/06 23:25:41 DEBUG : pacer: Rate limited, increasing sleep to 1.6s 2025/08/06 23:25:46 DEBUG : pacer: low level retry 5/10 (error no link) 2025/08/06 23:25:46 DEBUG : pacer: Rate limited, increasing sleep to 2s 2025/08/06 23:25:52 DEBUG : pacer: low level retry 6/10 (error no link) 2025/08/06 23:25:58 DEBUG : pacer: low level retry 7/10 (error no link) 2025/08/06 23:26:04 DEBUG : pacer: low level retry 8/10 (error no link) 2025/08/06 23:26:11 DEBUG : pacer: low level retry 9/10 (error no link) 2025/08/06 23:26:17 DEBUG : pacer: low level retry 10/10 (error no link) write_test.go:370: Error Trace: /home/rclone/go/src/github.com/rclone/rclone/vfs/write_test.go:370 /home/rclone/go/src/github.com/rclone/rclone/vfs/write_test.go:384 Error: Received unexpected error: can't download: no link Test: TestFileReadAtNonZeroLength write_test.go:372: Error Trace: /home/rclone/go/src/github.com/rclone/rclone/vfs/write_test.go:372 /home/rclone/go/src/github.com/rclone/rclone/vfs/write_test.go:384 Error: Not equal: expected: 0 actual : 100 Test: TestFileReadAtNonZeroLength write_test.go:373: Error Trace: /home/rclone/go/src/github.com/rclone/rclone/vfs/write_test.go:373 /home/rclone/go/src/github.com/rclone/rclone/vfs/write_test.go:384 Error: Not equal: expected: []byte{0x77, 0x6f, 0x77, 0x61, 0x6c, 0x65, 0x74, 0x32, 0x77, 0x75, 0x7a, 0x61, 0x67, 0x6f, 0x6b, 0x37, 0x78, 0x69, 0x78, 0x65, 0x67, 0x61, 0x70, 0x37, 0x68, 0x69, 0x6b, 0x75, 0x64, 0x65, 0x67, 0x35, 0x63, 0x75, 0x6e, 0x75, 0x79, 0x61, 0x6b, 0x38, 0x6a, 0x69, 0x68, 0x61, 0x64, 0x69, 0x73, 0x30, 0x6c, 0x75, 0x74, 0x75, 0x78, 0x65, 0x68, 0x32, 0x6e, 0x65, 0x71, 0x61, 0x7a, 0x65, 0x6d, 0x39, 0x7a, 0x75, 0x63, 0x69, 0x6d, 0x65, 0x7a, 0x35, 0x76, 0x65, 0x73, 0x65, 0x6c, 0x65, 0x6d, 0x34, 0x6a, 0x69, 0x6a, 0x61, 0x6a, 0x61, 0x64, 0x32, 0x79, 0x75, 0x62, 0x69, 0x68, 0x65, 0x7a, 0x33, 0x6a, 0x6f, 0x67, 0x75} actual : []byte{} Diff: --- Expected +++ Actual @@ -1,9 +1,2 @@ -([]uint8) (len=100) { - 00000000 77 6f 77 61 6c 65 74 32 77 75 7a 61 67 6f 6b 37 |wowalet2wuzagok7| - 00000010 78 69 78 65 67 61 70 37 68 69 6b 75 64 65 67 35 |xixegap7hikudeg5| - 00000020 63 75 6e 75 79 61 6b 38 6a 69 68 61 64 69 73 30 |cunuyak8jihadis0| - 00000030 6c 75 74 75 78 65 68 32 6e 65 71 61 7a 65 6d 39 |lutuxeh2neqazem9| - 00000040 7a 75 63 69 6d 65 7a 35 76 65 73 65 6c 65 6d 34 |zucimez5veselem4| - 00000050 6a 69 6a 61 6a 61 64 32 79 75 62 69 68 65 7a 33 |jijajad2yubihez3| - 00000060 6a 6f 67 75 |jogu| +([]uint8) { } Test: TestFileReadAtNonZeroLength 2025/08/06 23:26:17 DEBUG : WaitForWriters: timeout=30s 2025/08/06 23:26:17 DEBUG : Looking for writers 2025/08/06 23:26:17 DEBUG : file1: reading active writers 2025/08/06 23:26:17 DEBUG : >WaitForWriters: 2025/08/06 23:26:18 DEBUG : pacer: Reducing sleep to 1.5s 2025/08/06 23:26:19 DEBUG : pacer: Reducing sleep to 1.125s 2025/08/06 23:26:21 DEBUG : pacer: Reducing sleep to 843.75ms 2025/08/06 23:26:22 DEBUG : pacer: Reducing sleep to 632.8125ms --- FAIL: TestFileReadAtNonZeroLength (65.37s) FAIL 2025/08/06 23:26:22 DEBUG : PikPak root 'rclone-test-migivun4yiga': Purge remote 2025/08/06 23:26:23 DEBUG : pacer: Reducing sleep to 474.609375ms 2025/08/06 23:26:24 DEBUG : pacer: Reducing sleep to 355.957031ms "./vfs.test -test.v -test.timeout 1h0m0s -remote TestPikPak: -verbose -test.run '^(TestCaseSensitivity|TestFileReadAtNonZeroLength)$'" - Finished ERROR in 3m18.534335941s (try 4/5): exit status 1: Failed [TestFileReadAtNonZeroLength]