"./vfs.test -test.v -test.timeout 1h0m0s -remote TestPikPak: -verbose -test.run '^(TestFileReadAtNonZeroLength|TestReadFileHandleFlush|TestReadFileHandleReadAt|TestUnicodeNormalization)$'" - Starting (try 2/5) 2025/08/03 05:18:31 DEBUG : Creating backend with remote "TestPikPak:rclone-test-kukojeb2biya" 2025/08/03 05:18:31 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2025/08/03 05:18:33 DEBUG : Creating backend with remote "/tmp/rclone2663328121" === RUN TestReadFileHandleReadAt run.go:180: Remote "PikPak root 'rclone-test-kukojeb2biya'", Local "Local file system at /tmp/rclone2663328121", Modify Window "876000h0m0s" 2025/08/03 05:18:33 INFO : PikPak root 'rclone-test-kukojeb2biya': poll-interval is not supported by this remote 2025/08/03 05:18:33 NOTICE: PikPak root 'rclone-test-kukojeb2biya': --vfs-cache-mode writes or full is recommended for this remote as it can't stream 2025/08/03 05:18:35 DEBUG : dir/file1: calculating gcid: failed to unwrap object from src: dir/file1 2025/08/03 05:18:35 DEBUG : dir/file1: gcid = 75291f3a188a427f873fb88fbc37ce5ce150d01c 2025/08/03 05:18:37 DEBUG : dir/file1: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx 2025/08/03 05:18:37 DEBUG : dir/file1: Open: flags=O_RDONLY 2025/08/03 05:18:37 DEBUG : dir/file1: >Open: fd=dir/file1 (r), err= 2025/08/03 05:18:37 DEBUG : dir/file1: >OpenFile: fd=dir/file1 (r), err= 2025/08/03 05:18:37 DEBUG : dir/file1: ChunkedReader.openRange at 0 length 134217728 2025/08/03 05:18:44 DEBUG : pacer: low level retry 1/10 (error no link) 2025/08/03 05:18:44 DEBUG : pacer: Rate limited, increasing sleep to 200ms 2025/08/03 05:18:49 DEBUG : pacer: low level retry 2/10 (error no link) 2025/08/03 05:18:49 DEBUG : pacer: Rate limited, increasing sleep to 400ms 2025/08/03 05:18:55 DEBUG : pacer: low level retry 3/10 (error no link) 2025/08/03 05:18:55 DEBUG : pacer: Rate limited, increasing sleep to 800ms 2025/08/03 05:19:00 DEBUG : pacer: low level retry 4/10 (error no link) 2025/08/03 05:19:00 DEBUG : pacer: Rate limited, increasing sleep to 1.6s 2025/08/03 05:19:05 DEBUG : pacer: low level retry 5/10 (error no link) 2025/08/03 05:19:05 DEBUG : pacer: Rate limited, increasing sleep to 2s 2025/08/03 05:19:11 DEBUG : pacer: low level retry 6/10 (error no link) 2025/08/03 05:19:11 DEBUG : pacer: Reducing sleep to 1.5s 2025/08/03 05:19:14 DEBUG : pacer: Reducing sleep to 1.125s 2025/08/03 05:19:14 DEBUG : dir/file1: ChunkedReader.Read at 0 length 1 chunkOffset 0 chunkSize 134217728 2025/08/03 05:19:14 DEBUG : dir/file1: waiting for in-sequence read to 5 for 20ms 2025/08/03 05:19:14 DEBUG : dir/file1: aborting in-sequence read wait, off=5 2025/08/03 05:19:14 DEBUG : dir/file1: failed to wait for in-sequence read to 5 2025/08/03 05:19:14 DEBUG : dir/file1: ReadFileHandle.seek from 1 to 5 (fs.RangeSeeker) 2025/08/03 05:19:14 DEBUG : dir/file1: ChunkedReader.RangeSeek from 1 to 5 length -1 2025/08/03 05:19:14 DEBUG : dir/file1: ChunkedReader.Read at -1 length 1 chunkOffset 5 chunkSize 134217728 2025/08/03 05:19:14 DEBUG : dir/file1: ChunkedReader.openRange at 5 length 134217728 2025/08/03 05:19:15 DEBUG : pacer: Reducing sleep to 843.75ms 2025/08/03 05:19:15 DEBUG : dir/file1: ReadFileHandle.seek from 6 to 1 (fs.RangeSeeker) 2025/08/03 05:19:15 DEBUG : dir/file1: ChunkedReader.RangeSeek from 6 to 1 length -1 2025/08/03 05:19:15 DEBUG : dir/file1: ChunkedReader.Read at -1 length 1 chunkOffset 1 chunkSize 134217728 2025/08/03 05:19:15 DEBUG : dir/file1: ChunkedReader.openRange at 1 length 134217728 2025/08/03 05:19:16 DEBUG : pacer: Reducing sleep to 632.8125ms 2025/08/03 05:19:16 DEBUG : dir/file1: waiting for in-sequence read to 10 for 20ms 2025/08/03 05:19:16 DEBUG : dir/file1: aborting in-sequence read wait, off=10 2025/08/03 05:19:16 DEBUG : dir/file1: failed to wait for in-sequence read to 10 2025/08/03 05:19:16 DEBUG : dir/file1: ReadFileHandle.seek from 2 to 10 (fs.RangeSeeker) 2025/08/03 05:19:16 DEBUG : dir/file1: ChunkedReader.RangeSeek from 2 to 10 length -1 2025/08/03 05:19:16 DEBUG : dir/file1: ChunkedReader.Read at -1 length 6 chunkOffset 10 chunkSize 134217728 2025/08/03 05:19:16 DEBUG : dir/file1: ChunkedReader.openRange at 10 length 134217728 2025/08/03 05:19:18 DEBUG : pacer: Reducing sleep to 474.609375ms 2025/08/03 05:19:18 DEBUG : dir/file1: ReadFileHandle.seek from 16 to 10 (fs.RangeSeeker) 2025/08/03 05:19:18 DEBUG : dir/file1: ChunkedReader.RangeSeek from 16 to 10 length -1 2025/08/03 05:19:18 DEBUG : dir/file1: ChunkedReader.Read at -1 length 256 chunkOffset 10 chunkSize 134217728 2025/08/03 05:19:18 DEBUG : dir/file1: ChunkedReader.openRange at 10 length 134217728 2025/08/03 05:19:18 DEBUG : pacer: Reducing sleep to 355.957031ms 2025/08/03 05:19:18 DEBUG : dir/file1: waiting for in-sequence read to 100 for 20ms 2025/08/03 05:19:18 DEBUG : dir/file1: aborting in-sequence read wait, off=100 2025/08/03 05:19:18 DEBUG : dir/file1: failed to wait for in-sequence read to 100 2025/08/03 05:19:18 DEBUG : dir/file1: ReadFileHandle.Read attempt to read beyond end of file: 100 > 16 2025/08/03 05:19:18 DEBUG : dir/file1: waiting for in-sequence read to 100 for 20ms 2025/08/03 05:19:18 DEBUG : dir/file1: aborting in-sequence read wait, off=100 2025/08/03 05:19:18 DEBUG : dir/file1: failed to wait for in-sequence read to 100 2025/08/03 05:19:18 ERROR : dir/file1: ReadFileHandle.Read error: Bad file descriptor 2025/08/03 05:19:18 DEBUG : WaitForWriters: timeout=30s 2025/08/03 05:19:18 DEBUG : dir: Looking for writers 2025/08/03 05:19:18 DEBUG : file1: reading active writers 2025/08/03 05:19:18 DEBUG : Looking for writers 2025/08/03 05:19:18 DEBUG : dir: reading active writers 2025/08/03 05:19:18 DEBUG : >WaitForWriters: 2025/08/03 05:19:18 DEBUG : pacer: Reducing sleep to 266.967773ms 2025/08/03 05:19:19 DEBUG : pacer: Reducing sleep to 200.225829ms 2025/08/03 05:19:19 DEBUG : pacer: Reducing sleep to 150.169371ms 2025/08/03 05:19:20 DEBUG : pacer: Reducing sleep to 112.627028ms 2025/08/03 05:19:20 DEBUG : pacer: Reducing sleep to 100ms 2025/08/03 05:19:20 DEBUG : dir: Rmdir: contains trashed file: "file1" --- PASS: TestReadFileHandleReadAt (48.85s) === RUN TestReadFileHandleFlush run.go:180: Remote "PikPak root 'rclone-test-kukojeb2biya'", Local "Local file system at /tmp/rclone2663328121", Modify Window "876000h0m0s" 2025/08/03 05:19:22 INFO : PikPak root 'rclone-test-kukojeb2biya': poll-interval is not supported by this remote 2025/08/03 05:19:22 NOTICE: PikPak root 'rclone-test-kukojeb2biya': --vfs-cache-mode writes or full is recommended for this remote as it can't stream 2025/08/03 05:19:23 DEBUG : dir/file1: calculating gcid: failed to unwrap object from src: dir/file1 2025/08/03 05:19:23 DEBUG : dir/file1: gcid = 75291f3a188a427f873fb88fbc37ce5ce150d01c 2025/08/03 05:19:24 DEBUG : dir/file1: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx 2025/08/03 05:19:25 DEBUG : dir/file1: Open: flags=O_RDONLY 2025/08/03 05:19:25 DEBUG : dir/file1: >Open: fd=dir/file1 (r), err= 2025/08/03 05:19:25 DEBUG : dir/file1: >OpenFile: fd=dir/file1 (r), err= 2025/08/03 05:19:25 DEBUG : dir/file1: ChunkedReader.openRange at 0 length 134217728 2025/08/03 05:19:27 DEBUG : dir/file1: ChunkedReader.Read at 0 length 256 chunkOffset 0 chunkSize 134217728 2025/08/03 05:19:27 DEBUG : WaitForWriters: timeout=30s 2025/08/03 05:19:27 DEBUG : dir: Looking for writers 2025/08/03 05:19:27 DEBUG : file1: reading active writers 2025/08/03 05:19:27 DEBUG : Looking for writers 2025/08/03 05:19:27 DEBUG : dir: reading active writers 2025/08/03 05:19:27 DEBUG : >WaitForWriters: 2025/08/03 05:19:29 DEBUG : dir: Rmdir: contains trashed file: "file1" --- PASS: TestReadFileHandleFlush (8.77s) === RUN TestUnicodeNormalization run.go:180: Remote "PikPak root 'rclone-test-kukojeb2biya'", Local "Local file system at /tmp/rclone2663328121", Modify Window "876000h0m0s" 2025/08/03 05:19:31 DEBUG : normal name with no special characters.txt: calculating gcid: failed to unwrap object from src: normal name with no special characters.txt 2025/08/03 05:19:31 DEBUG : normal name with no special characters.txt: gcid = ed1267439bbc430e2a3c002a4a39ac8869a858d5 2025/08/03 05:19:32 DEBUG : 測試_Русский___ě_áñ: calculating gcid: failed to unwrap object from src: 測試_Русский___ě_áñ 2025/08/03 05:19:32 DEBUG : 測試_Русский___ě_áñ: gcid = c0a8962153624d521cfc28e9e9437c2a7ddddffd 2025/08/03 05:19:34 INFO : PikPak root 'rclone-test-kukojeb2biya': poll-interval is not supported by this remote 2025/08/03 05:19:34 NOTICE: PikPak root 'rclone-test-kukojeb2biya': --vfs-cache-mode writes or full is recommended for this remote as it can't stream 2025/08/03 05:19:34 DEBUG : normal name with no special characters.txt: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx 2025/08/03 05:19:34 DEBUG : normal name with no special characters.txt: Open: flags=O_RDONLY 2025/08/03 05:19:34 DEBUG : normal name with no special characters.txt: >Open: fd=normal name with no special characters.txt (r), err= 2025/08/03 05:19:34 DEBUG : normal name with no special characters.txt: >OpenFile: fd=normal name with no special characters.txt (r), err= 2025/08/03 05:19:34 DEBUG : normal name with no special characters.txt: ChunkedReader.openRange at 0 length 134217728 2025/08/03 05:19:36 DEBUG : normal name with no special characters.txt: ChunkedReader.Read at 0 length 5 chunkOffset 0 chunkSize 134217728 2025/08/03 05:19:36 DEBUG : 測試_Русский___ě_áñ: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx 2025/08/03 05:19:36 DEBUG : 測試_Русский___ě_áñ: Open: flags=O_RDONLY 2025/08/03 05:19:36 DEBUG : 測試_Русский___ě_áñ: >Open: fd=測試_Русский___ě_áñ (r), err= 2025/08/03 05:19:36 DEBUG : 測試_Русский___ě_áñ: >OpenFile: fd=測試_Русский___ě_áñ (r), err= 2025/08/03 05:19:36 DEBUG : 測試_Русский___ě_áñ: ChunkedReader.openRange at 0 length 134217728 2025/08/03 05:19:39 DEBUG : 測試_Русский___ě_áñ: ChunkedReader.Read at 0 length 5 chunkOffset 0 chunkSize 134217728 2025/08/03 05:19:39 DEBUG : normal name with no special characters.txt: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx 2025/08/03 05:19:39 DEBUG : normal name with no special characters.txt: Open: flags=O_RDONLY 2025/08/03 05:19:39 DEBUG : normal name with no special characters.txt: >Open: fd=normal name with no special characters.txt (r), err= 2025/08/03 05:19:39 DEBUG : normal name with no special characters.txt: >OpenFile: fd=normal name with no special characters.txt (r), err= 2025/08/03 05:19:39 DEBUG : normal name with no special characters.txt: ChunkedReader.openRange at 0 length 134217728 2025/08/03 05:19:39 DEBUG : normal name with no special characters.txt: ChunkedReader.Read at 0 length 5 chunkOffset 0 chunkSize 134217728 2025/08/03 05:19:39 DEBUG : 測試_Русский___ě_áñ: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx 2025/08/03 05:19:39 DEBUG : 測試_Русский___ě_áñ: >OpenFile: fd=, err=file does not exist 2025/08/03 05:19:39 DEBUG : WaitForWriters: timeout=30s 2025/08/03 05:19:39 DEBUG : Looking for writers 2025/08/03 05:19:39 DEBUG : normal name with no special characters.txt: reading active writers 2025/08/03 05:19:39 DEBUG : 測試_Русский___ě_áñ: reading active writers 2025/08/03 05:19:39 DEBUG : >WaitForWriters: --- PASS: TestUnicodeNormalization (11.35s) === RUN TestFileReadAtNonZeroLength run.go:180: Remote "PikPak root 'rclone-test-kukojeb2biya'", Local "Local file system at /tmp/rclone2663328121", Modify Window "876000h0m0s" 2025/08/03 05:19:42 INFO : PikPak root 'rclone-test-kukojeb2biya': poll-interval is not supported by this remote 2025/08/03 05:19:42 NOTICE: PikPak root 'rclone-test-kukojeb2biya': --vfs-cache-mode writes or full is recommended for this remote as it can't stream 2025/08/03 05:19:42 DEBUG : file1: OpenFile: flags=O_WRONLY|O_CREATE, perm=-rwxrwxrwx 2025/08/03 05:19:42 DEBUG : file1: Open: flags=O_WRONLY|O_CREATE 2025/08/03 05:19:42 DEBUG : Added virtual directory entry vAddFile: "file1" 2025/08/03 05:19:42 DEBUG : file1: >Open: fd=file1 (w), err= 2025/08/03 05:19:42 DEBUG : file1: >OpenFile: fd=file1 (w), err= 2025/08/03 05:19:42 DEBUG : Added virtual directory entry vAddFile: "file1" 2025/08/03 05:19:42 DEBUG : PikPak root 'rclone-test-kukojeb2biya': File to upload is small (100 bytes), uploading instead of streaming 2025/08/03 05:19:43 DEBUG : file1: calculating gcid: failed to unwrap object from src: file1 2025/08/03 05:19:43 DEBUG : file1: gcid = df8987b704751e947aa7aea59445f81a472852af 2025/08/03 05:19:45 DEBUG : file1: Dst hash empty - aborting Src hash check 2025/08/03 05:19:45 DEBUG : file1: Size of src and dst objects identical 2025/08/03 05:19:45 DEBUG : Added virtual directory entry vAddFile: "file1" 2025/08/03 05:19:45 DEBUG : file1: OpenFile: flags=O_RDONLY, perm=---------- 2025/08/03 05:19:45 DEBUG : file1: Open: flags=O_RDONLY 2025/08/03 05:19:45 DEBUG : file1: >Open: fd=file1 (r), err= 2025/08/03 05:19:45 DEBUG : file1: >OpenFile: fd=file1 (r), err= 2025/08/03 05:19:45 DEBUG : file1: ChunkedReader.openRange at 0 length 134217728 2025/08/03 05:19:51 DEBUG : pacer: low level retry 1/10 (error no link) 2025/08/03 05:19:51 DEBUG : pacer: Rate limited, increasing sleep to 200ms 2025/08/03 05:19:56 DEBUG : pacer: low level retry 2/10 (error no link) 2025/08/03 05:19:56 DEBUG : pacer: Rate limited, increasing sleep to 400ms 2025/08/03 05:20:01 DEBUG : pacer: low level retry 3/10 (error no link) 2025/08/03 05:20:01 DEBUG : pacer: Rate limited, increasing sleep to 800ms 2025/08/03 05:20:07 DEBUG : pacer: low level retry 4/10 (error no link) 2025/08/03 05:20:07 DEBUG : pacer: Rate limited, increasing sleep to 1.6s 2025/08/03 05:20:12 DEBUG : pacer: low level retry 5/10 (error no link) 2025/08/03 05:20:12 DEBUG : pacer: Rate limited, increasing sleep to 2s 2025/08/03 05:20:17 DEBUG : pacer: low level retry 6/10 (error no link) 2025/08/03 05:20:24 DEBUG : pacer: low level retry 7/10 (error no link) 2025/08/03 05:20:30 DEBUG : pacer: low level retry 8/10 (error no link) 2025/08/03 05:20:32 DEBUG : Saving config "captcha_token" in section "TestPikPak" of the config file 2025/08/03 05:20:38 DEBUG : pacer: low level retry 9/10 (error no link) 2025/08/03 05:20:44 DEBUG : pacer: low level retry 10/10 (error no link) write_test.go:370: Error Trace: /home/rclone/go/src/github.com/rclone/rclone/vfs/write_test.go:370 /home/rclone/go/src/github.com/rclone/rclone/vfs/write_test.go:384 Error: Received unexpected error: can't download: no link Test: TestFileReadAtNonZeroLength write_test.go:372: Error Trace: /home/rclone/go/src/github.com/rclone/rclone/vfs/write_test.go:372 /home/rclone/go/src/github.com/rclone/rclone/vfs/write_test.go:384 Error: Not equal: expected: 0 actual : 100 Test: TestFileReadAtNonZeroLength write_test.go:373: Error Trace: /home/rclone/go/src/github.com/rclone/rclone/vfs/write_test.go:373 /home/rclone/go/src/github.com/rclone/rclone/vfs/write_test.go:384 Error: Not equal: expected: []byte{0x79, 0x61, 0x6c, 0x75, 0x72, 0x75, 0x6e, 0x33, 0x6a, 0x75, 0x79, 0x65, 0x79, 0x75, 0x62, 0x35, 0x62, 0x69, 0x68, 0x6f, 0x67, 0x65, 0x6e, 0x36, 0x72, 0x69, 0x6a, 0x69, 0x72, 0x6f, 0x6c, 0x30, 0x77, 0x61, 0x66, 0x75, 0x78, 0x69, 0x66, 0x37, 0x67, 0x65, 0x66, 0x69, 0x76, 0x69, 0x76, 0x37, 0x67, 0x6f, 0x7a, 0x6f, 0x6d, 0x69, 0x6d, 0x30, 0x79, 0x61, 0x74, 0x69, 0x62, 0x6f, 0x6a, 0x39, 0x68, 0x6f, 0x73, 0x69, 0x79, 0x6f, 0x78, 0x35, 0x7a, 0x61, 0x74, 0x65, 0x66, 0x6f, 0x77, 0x31, 0x6c, 0x6f, 0x71, 0x75, 0x74, 0x75, 0x79, 0x39, 0x74, 0x75, 0x6c, 0x61, 0x70, 0x6f, 0x71, 0x36, 0x73, 0x6f, 0x6c, 0x61} actual : []byte{} Diff: --- Expected +++ Actual @@ -1,9 +1,2 @@ -([]uint8) (len=100) { - 00000000 79 61 6c 75 72 75 6e 33 6a 75 79 65 79 75 62 35 |yalurun3juyeyub5| - 00000010 62 69 68 6f 67 65 6e 36 72 69 6a 69 72 6f 6c 30 |bihogen6rijirol0| - 00000020 77 61 66 75 78 69 66 37 67 65 66 69 76 69 76 37 |wafuxif7gefiviv7| - 00000030 67 6f 7a 6f 6d 69 6d 30 79 61 74 69 62 6f 6a 39 |gozomim0yatiboj9| - 00000040 68 6f 73 69 79 6f 78 35 7a 61 74 65 66 6f 77 31 |hosiyox5zatefow1| - 00000050 6c 6f 71 75 74 75 79 39 74 75 6c 61 70 6f 71 36 |loqutuy9tulapoq6| - 00000060 73 6f 6c 61 |sola| +([]uint8) { } Test: TestFileReadAtNonZeroLength 2025/08/03 05:20:44 DEBUG : WaitForWriters: timeout=30s 2025/08/03 05:20:44 DEBUG : Looking for writers 2025/08/03 05:20:44 DEBUG : file1: reading active writers 2025/08/03 05:20:44 DEBUG : >WaitForWriters: 2025/08/03 05:20:45 DEBUG : pacer: Reducing sleep to 1.5s 2025/08/03 05:20:47 DEBUG : pacer: Reducing sleep to 1.125s 2025/08/03 05:20:48 DEBUG : pacer: Reducing sleep to 843.75ms 2025/08/03 05:20:49 DEBUG : pacer: Reducing sleep to 632.8125ms --- FAIL: TestFileReadAtNonZeroLength (67.26s) FAIL 2025/08/03 05:20:49 DEBUG : PikPak root 'rclone-test-kukojeb2biya': Purge remote 2025/08/03 05:20:50 DEBUG : pacer: Reducing sleep to 474.609375ms 2025/08/03 05:20:51 DEBUG : pacer: Reducing sleep to 355.957031ms "./vfs.test -test.v -test.timeout 1h0m0s -remote TestPikPak: -verbose -test.run '^(TestFileReadAtNonZeroLength|TestReadFileHandleFlush|TestReadFileHandleReadAt|TestUnicodeNormalization)$'" - Finished ERROR in 2m19.682809904s (try 2/5): exit status 1: Failed [TestFileReadAtNonZeroLength]