"./vfs.test -test.v -test.timeout 1h0m0s -remote TestPikPak: -verbose -test.run '^(TestCaseSensitivity|TestFileReadAtNonZeroLength)$'" - Starting (try 3/5) 2025/05/18 06:49:54 DEBUG : Creating backend with remote "TestPikPak:rclone-test-sojasap5roci" 2025/05/18 06:49:54 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2025/05/18 06:49:55 DEBUG : Creating backend with remote "/tmp/rclone449099463" === RUN TestCaseSensitivity run.go:180: Remote "PikPak root 'rclone-test-sojasap5roci'", Local "Local file system at /tmp/rclone449099463", Modify Window "876000h0m0s" 2025/05/18 06:49:55 DEBUG : FiLeA: calculating gcid: failed to unwrap object from src: FiLeA 2025/05/18 06:49:55 DEBUG : FiLeA: gcid = ed1267439bbc430e2a3c002a4a39ac8869a858d5 2025/05/18 06:49:57 DEBUG : FiLeB: calculating gcid: failed to unwrap object from src: FiLeB 2025/05/18 06:49:57 DEBUG : FiLeB: gcid = c0a8962153624d521cfc28e9e9437c2a7ddddffd 2025/05/18 06:49:58 DEBUG : FilEb: calculating gcid: failed to unwrap object from src: FilEb 2025/05/18 06:49:58 DEBUG : FilEb: gcid = d9d37e3253e48da9b2bbbe117f2ddc5b8654d660 2025/05/18 06:50:00 INFO : PikPak root 'rclone-test-sojasap5roci': poll-interval is not supported by this remote 2025/05/18 06:50:00 NOTICE: PikPak root 'rclone-test-sojasap5roci': --vfs-cache-mode writes or full is recommended for this remote as it can't stream 2025/05/18 06:50:00 INFO : PikPak root 'rclone-test-sojasap5roci': poll-interval is not supported by this remote 2025/05/18 06:50:00 NOTICE: PikPak root 'rclone-test-sojasap5roci': --vfs-cache-mode writes or full is recommended for this remote as it can't stream 2025/05/18 06:50:00 DEBUG : FiLeA: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx 2025/05/18 06:50:00 DEBUG : FiLeA: Open: flags=O_RDONLY 2025/05/18 06:50:00 DEBUG : FiLeA: >Open: fd=FiLeA (r), err= 2025/05/18 06:50:00 DEBUG : FiLeA: >OpenFile: fd=FiLeA (r), err= 2025/05/18 06:50:00 DEBUG : FiLeA: ChunkedReader.openRange at 0 length 134217728 2025/05/18 06:50:01 DEBUG : pacer: low level retry 1/10 (error no link) 2025/05/18 06:50:01 DEBUG : pacer: Rate limited, increasing sleep to 200ms 2025/05/18 06:50:02 DEBUG : pacer: Reducing sleep to 150ms 2025/05/18 06:50:03 DEBUG : pacer: Reducing sleep to 112.5ms 2025/05/18 06:50:03 DEBUG : FiLeA: ChunkedReader.Read at 0 length 5 chunkOffset 0 chunkSize 134217728 2025/05/18 06:50:03 DEBUG : FiLeA: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx 2025/05/18 06:50:03 DEBUG : pacer: Reducing sleep to 100ms 2025/05/18 06:50:03 DEBUG : FiLeA: Open: flags=O_RDONLY 2025/05/18 06:50:03 DEBUG : FiLeA: >Open: fd=FiLeA (r), err= 2025/05/18 06:50:03 DEBUG : FiLeA: >OpenFile: fd=FiLeA (r), err= 2025/05/18 06:50:03 DEBUG : FiLeA: ChunkedReader.openRange at 0 length 134217728 2025/05/18 06:50:05 DEBUG : FiLeA: ChunkedReader.Read at 0 length 5 chunkOffset 0 chunkSize 134217728 2025/05/18 06:50:05 DEBUG : FiLeA: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx 2025/05/18 06:50:05 DEBUG : FiLeA: Open: flags=O_RDONLY 2025/05/18 06:50:05 DEBUG : FiLeA: >Open: fd=FiLeA (r), err= 2025/05/18 06:50:05 DEBUG : FiLeA: >OpenFile: fd=FiLeA (r), err= 2025/05/18 06:50:05 DEBUG : FiLeA: ChunkedReader.openRange at 0 length 134217728 2025/05/18 06:50:05 DEBUG : FiLeA: ChunkedReader.Read at 0 length 5 chunkOffset 0 chunkSize 134217728 2025/05/18 06:50:05 DEBUG : FiLeB: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx 2025/05/18 06:50:05 DEBUG : FiLeB: Open: flags=O_RDONLY 2025/05/18 06:50:05 DEBUG : FiLeB: >Open: fd=FiLeB (r), err= 2025/05/18 06:50:05 DEBUG : FiLeB: >OpenFile: fd=FiLeB (r), err= 2025/05/18 06:50:05 DEBUG : FiLeB: ChunkedReader.openRange at 0 length 134217728 2025/05/18 06:50:06 DEBUG : pacer: low level retry 1/10 (error no link) 2025/05/18 06:50:06 DEBUG : pacer: Rate limited, increasing sleep to 200ms 2025/05/18 06:50:07 DEBUG : pacer: low level retry 2/10 (error no link) 2025/05/18 06:50:07 DEBUG : pacer: Rate limited, increasing sleep to 400ms 2025/05/18 06:50:09 DEBUG : pacer: low level retry 3/10 (error no link) 2025/05/18 06:50:09 DEBUG : pacer: Rate limited, increasing sleep to 800ms 2025/05/18 06:50:10 DEBUG : pacer: low level retry 4/10 (error no link) 2025/05/18 06:50:10 DEBUG : pacer: Rate limited, increasing sleep to 1.6s 2025/05/18 06:50:11 DEBUG : pacer: low level retry 5/10 (error no link) 2025/05/18 06:50:11 DEBUG : pacer: Rate limited, increasing sleep to 2s 2025/05/18 06:50:13 DEBUG : pacer: low level retry 6/10 (error no link) 2025/05/18 06:50:15 DEBUG : pacer: low level retry 7/10 (error no link) 2025/05/18 06:50:17 DEBUG : pacer: low level retry 8/10 (error no link) 2025/05/18 06:50:19 DEBUG : pacer: low level retry 9/10 (error no link) 2025/05/18 06:50:21 DEBUG : pacer: low level retry 10/10 (error no link) 2025/05/18 06:50:21 DEBUG : FilEb: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx 2025/05/18 06:50:21 DEBUG : FilEb: Open: flags=O_RDONLY 2025/05/18 06:50:21 DEBUG : FilEb: >Open: fd=FilEb (r), err= 2025/05/18 06:50:21 DEBUG : FilEb: >OpenFile: fd=FilEb (r), err= 2025/05/18 06:50:21 DEBUG : FilEb: ChunkedReader.openRange at 0 length 134217728 2025/05/18 06:50:23 DEBUG : pacer: low level retry 1/10 (error no link) 2025/05/18 06:50:25 DEBUG : pacer: low level retry 2/10 (error no link) 2025/05/18 06:50:27 DEBUG : pacer: low level retry 3/10 (error no link) 2025/05/18 06:50:29 DEBUG : pacer: low level retry 4/10 (error no link) 2025/05/18 06:50:31 DEBUG : pacer: low level retry 5/10 (error no link) 2025/05/18 06:50:33 DEBUG : pacer: low level retry 6/10 (error no link) 2025/05/18 06:50:35 DEBUG : pacer: low level retry 7/10 (error no link) 2025/05/18 06:50:37 DEBUG : pacer: low level retry 8/10 (error no link) 2025/05/18 06:50:39 DEBUG : pacer: low level retry 9/10 (error no link) 2025/05/18 06:50:41 DEBUG : pacer: low level retry 10/10 (error no link) vfs_case_test.go:65: Can't test case sensitivity - this remote doesn't comply as case-sensitive 2025/05/18 06:50:41 DEBUG : WaitForWriters: timeout=30s 2025/05/18 06:50:41 DEBUG : : Looking for writers 2025/05/18 06:50:41 DEBUG : FiLeA: reading active writers 2025/05/18 06:50:41 DEBUG : FiLeB: reading active writers 2025/05/18 06:50:41 DEBUG : FilEb: reading active writers 2025/05/18 06:50:41 DEBUG : >WaitForWriters: 2025/05/18 06:50:41 DEBUG : WaitForWriters: timeout=30s 2025/05/18 06:50:41 DEBUG : : Looking for writers 2025/05/18 06:50:41 DEBUG : FilEb: reading active writers 2025/05/18 06:50:41 DEBUG : FiLeA: reading active writers 2025/05/18 06:50:41 DEBUG : FiLeB: reading active writers 2025/05/18 06:50:41 DEBUG : >WaitForWriters: 2025/05/18 06:50:42 DEBUG : pacer: Reducing sleep to 1.5s 2025/05/18 06:50:44 DEBUG : pacer: Reducing sleep to 1.125s 2025/05/18 06:50:45 DEBUG : pacer: Reducing sleep to 843.75ms 2025/05/18 06:50:46 DEBUG : pacer: Reducing sleep to 632.8125ms 2025/05/18 06:50:47 DEBUG : pacer: Reducing sleep to 474.609375ms 2025/05/18 06:50:48 DEBUG : pacer: Reducing sleep to 355.957031ms 2025/05/18 06:50:48 DEBUG : pacer: Reducing sleep to 266.967773ms 2025/05/18 06:50:49 DEBUG : pacer: Reducing sleep to 200.225829ms --- SKIP: TestCaseSensitivity (54.28s) === RUN TestFileReadAtNonZeroLength run.go:180: Remote "PikPak root 'rclone-test-sojasap5roci'", Local "Local file system at /tmp/rclone449099463", Modify Window "876000h0m0s" 2025/05/18 06:50:49 INFO : PikPak root 'rclone-test-sojasap5roci': poll-interval is not supported by this remote 2025/05/18 06:50:49 NOTICE: PikPak root 'rclone-test-sojasap5roci': --vfs-cache-mode writes or full is recommended for this remote as it can't stream 2025/05/18 06:50:49 DEBUG : file1: OpenFile: flags=O_WRONLY|O_CREATE, perm=-rwxrwxrwx 2025/05/18 06:50:49 DEBUG : pacer: Reducing sleep to 150.169371ms 2025/05/18 06:50:49 DEBUG : file1: Open: flags=O_WRONLY|O_CREATE 2025/05/18 06:50:49 DEBUG : : Added virtual directory entry vAddFile: "file1" 2025/05/18 06:50:49 DEBUG : file1: >Open: fd=file1 (w), err= 2025/05/18 06:50:49 DEBUG : file1: >OpenFile: fd=file1 (w), err= 2025/05/18 06:50:49 DEBUG : : Added virtual directory entry vAddFile: "file1" 2025/05/18 06:50:49 DEBUG : PikPak root 'rclone-test-sojasap5roci': File to upload is small (100 bytes), uploading instead of streaming 2025/05/18 06:50:49 DEBUG : pacer: Reducing sleep to 112.627028ms 2025/05/18 06:50:49 DEBUG : file1: calculating gcid: failed to unwrap object from src: file1 2025/05/18 06:50:49 DEBUG : file1: gcid = 438e0ed9d474425a07efa45ec8f1e8a3b8a5d828 2025/05/18 06:50:50 DEBUG : pacer: Reducing sleep to 100ms 2025/05/18 06:50:51 DEBUG : file1: canceling upload: failed to upload: operation error S3: PutObject, https response error StatusCode: 400, RequestID: 6829834A9453943232F7254C, HostID: vip-lixian-07.mypikpak.com, api error InvalidArgument: aws-chunked encoding is not supported with the specified x-amz-content-sha256 value. 2025/05/18 06:50:52 DEBUG : file1: waiting 500ms for the cancellation to be effective 2025/05/18 06:50:52 ERROR : file1: WriteFileHandle.New Rcat failed: failed to upload: operation error S3: PutObject, https response error StatusCode: 400, RequestID: 6829834A9453943232F7254C, HostID: vip-lixian-07.mypikpak.com, api error InvalidArgument: aws-chunked encoding is not supported with the specified x-amz-content-sha256 value. 2025/05/18 06:50:52 DEBUG : file1: Remove: 2025/05/18 06:50:52 DEBUG : : Added virtual directory entry vDel: "file1" 2025/05/18 06:50:52 DEBUG : file1: >Remove: err= write_test.go:360: Error Trace: /home/rclone/go/src/github.com/rclone/rclone/vfs/write_test.go:360 /home/rclone/go/src/github.com/rclone/rclone/vfs/write_test.go:384 Error: Received unexpected error: failed to upload: operation error S3: PutObject, https response error StatusCode: 400, RequestID: 6829834A9453943232F7254C, HostID: vip-lixian-07.mypikpak.com, api error InvalidArgument: aws-chunked encoding is not supported with the specified x-amz-content-sha256 value. Test: TestFileReadAtNonZeroLength 2025/05/18 06:50:52 DEBUG : file1: OpenFile: flags=O_RDONLY, perm=---------- 2025/05/18 06:50:52 DEBUG : file1: >OpenFile: fd=, err=file does not exist write_test.go:365: Error Trace: /home/rclone/go/src/github.com/rclone/rclone/vfs/write_test.go:365 /home/rclone/go/src/github.com/rclone/rclone/vfs/write_test.go:384 Error: Received unexpected error: file does not exist Test: TestFileReadAtNonZeroLength 2025/05/18 06:50:52 DEBUG : WaitForWriters: timeout=30s 2025/05/18 06:50:52 DEBUG : : Looking for writers 2025/05/18 06:50:52 DEBUG : >WaitForWriters: --- FAIL: TestFileReadAtNonZeroLength (3.81s) FAIL 2025/05/18 06:50:53 DEBUG : PikPak root 'rclone-test-sojasap5roci': Purge remote "./vfs.test -test.v -test.timeout 1h0m0s -remote TestPikPak: -verbose -test.run '^(TestCaseSensitivity|TestFileReadAtNonZeroLength)$'" - Finished ERROR in 59.831000813s (try 3/5): exit status 1: Failed [TestFileReadAtNonZeroLength]