"./vfs.test -test.v -test.timeout 1h0m0s -remote TestPikPak: -verbose -test.run '^(TestCaseSensitivity|TestFileReadAtNonZeroLength|TestReadFileHandleFlush|TestReadFileHandleSeek|TestUnicodeNormalization)$'" - Starting (try 2/5) 2025/05/18 06:47:36 DEBUG : Creating backend with remote "TestPikPak:rclone-test-qicuyib0buha" 2025/05/18 06:47:36 DEBUG : Using config file from "/home/rclone/.rclone.conf" 2025/05/18 06:47:37 DEBUG : Creating backend with remote "/tmp/rclone1587632299" === RUN TestReadFileHandleSeek run.go:180: Remote "PikPak root 'rclone-test-qicuyib0buha'", Local "Local file system at /tmp/rclone1587632299", Modify Window "876000h0m0s" 2025/05/18 06:47:37 INFO : PikPak root 'rclone-test-qicuyib0buha': poll-interval is not supported by this remote 2025/05/18 06:47:37 NOTICE: PikPak root 'rclone-test-qicuyib0buha': --vfs-cache-mode writes or full is recommended for this remote as it can't stream 2025/05/18 06:47:38 DEBUG : dir/file1: calculating gcid: failed to unwrap object from src: dir/file1 2025/05/18 06:47:38 DEBUG : dir/file1: gcid = 75291f3a188a427f873fb88fbc37ce5ce150d01c 2025/05/18 06:47:39 DEBUG : dir/file1: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx 2025/05/18 06:47:39 DEBUG : dir/file1: Open: flags=O_RDONLY 2025/05/18 06:47:39 DEBUG : dir/file1: >Open: fd=dir/file1 (r), err= 2025/05/18 06:47:39 DEBUG : dir/file1: >OpenFile: fd=dir/file1 (r), err= 2025/05/18 06:47:39 DEBUG : dir/file1: ChunkedReader.openRange at 0 length 134217728 2025/05/18 06:47:41 DEBUG : dir/file1: ChunkedReader.Read at 0 length 1 chunkOffset 0 chunkSize 134217728 2025/05/18 06:47:41 DEBUG : dir/file1: waiting for in-sequence read to 5 for 20ms 2025/05/18 06:47:41 DEBUG : dir/file1: aborting in-sequence read wait, off=5 2025/05/18 06:47:41 DEBUG : dir/file1: failed to wait for in-sequence read to 5 2025/05/18 06:47:41 DEBUG : dir/file1: ReadFileHandle.seek from 1 to 5 (fs.RangeSeeker) 2025/05/18 06:47:41 DEBUG : dir/file1: ChunkedReader.RangeSeek from 1 to 5 length -1 2025/05/18 06:47:41 DEBUG : dir/file1: ChunkedReader.Read at -1 length 1 chunkOffset 5 chunkSize 134217728 2025/05/18 06:47:41 DEBUG : dir/file1: ChunkedReader.openRange at 5 length 134217728 2025/05/18 06:47:42 DEBUG : dir/file1: ReadFileHandle.seek from 6 to 3 (fs.RangeSeeker) 2025/05/18 06:47:42 DEBUG : dir/file1: ChunkedReader.RangeSeek from 6 to 3 length -1 2025/05/18 06:47:42 DEBUG : dir/file1: ChunkedReader.Read at -1 length 1 chunkOffset 3 chunkSize 134217728 2025/05/18 06:47:42 DEBUG : dir/file1: ChunkedReader.openRange at 3 length 134217728 2025/05/18 06:47:43 DEBUG : dir/file1: ReadFileHandle.seek from 4 to 13 (fs.RangeSeeker) 2025/05/18 06:47:43 DEBUG : dir/file1: ChunkedReader.RangeSeek from 4 to 13 length -1 2025/05/18 06:47:43 DEBUG : dir/file1: ChunkedReader.Read at -1 length 1 chunkOffset 13 chunkSize 134217728 2025/05/18 06:47:43 DEBUG : dir/file1: ChunkedReader.openRange at 13 length 134217728 2025/05/18 06:47:44 DEBUG : WaitForWriters: timeout=30s 2025/05/18 06:47:44 DEBUG : dir: Looking for writers 2025/05/18 06:47:44 DEBUG : file1: reading active writers 2025/05/18 06:47:44 DEBUG : : Looking for writers 2025/05/18 06:47:44 DEBUG : dir: reading active writers 2025/05/18 06:47:44 DEBUG : >WaitForWriters: 2025/05/18 06:47:46 DEBUG : dir: Rmdir: contains trashed file: "file1" --- PASS: TestReadFileHandleSeek (10.42s) === RUN TestReadFileHandleFlush run.go:180: Remote "PikPak root 'rclone-test-qicuyib0buha'", Local "Local file system at /tmp/rclone1587632299", Modify Window "876000h0m0s" 2025/05/18 06:47:47 INFO : PikPak root 'rclone-test-qicuyib0buha': poll-interval is not supported by this remote 2025/05/18 06:47:47 NOTICE: PikPak root 'rclone-test-qicuyib0buha': --vfs-cache-mode writes or full is recommended for this remote as it can't stream 2025/05/18 06:47:48 DEBUG : dir/file1: calculating gcid: failed to unwrap object from src: dir/file1 2025/05/18 06:47:48 DEBUG : dir/file1: gcid = 75291f3a188a427f873fb88fbc37ce5ce150d01c 2025/05/18 06:47:49 DEBUG : dir/file1: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx 2025/05/18 06:47:49 DEBUG : dir/file1: Open: flags=O_RDONLY 2025/05/18 06:47:49 DEBUG : dir/file1: >Open: fd=dir/file1 (r), err= 2025/05/18 06:47:49 DEBUG : dir/file1: >OpenFile: fd=dir/file1 (r), err= 2025/05/18 06:47:49 DEBUG : dir/file1: ChunkedReader.openRange at 0 length 134217728 2025/05/18 06:47:50 DEBUG : pacer: low level retry 1/10 (error no link) 2025/05/18 06:47:50 DEBUG : pacer: Rate limited, increasing sleep to 200ms 2025/05/18 06:47:52 DEBUG : pacer: low level retry 2/10 (error no link) 2025/05/18 06:47:52 DEBUG : pacer: Rate limited, increasing sleep to 400ms 2025/05/18 06:47:53 DEBUG : pacer: low level retry 3/10 (error no link) 2025/05/18 06:47:53 DEBUG : pacer: Rate limited, increasing sleep to 800ms 2025/05/18 06:47:54 DEBUG : pacer: low level retry 4/10 (error no link) 2025/05/18 06:47:54 DEBUG : pacer: Rate limited, increasing sleep to 1.6s 2025/05/18 06:47:55 DEBUG : pacer: Reducing sleep to 1.2s 2025/05/18 06:47:57 DEBUG : pacer: Reducing sleep to 900ms 2025/05/18 06:47:57 DEBUG : dir/file1: ChunkedReader.Read at 0 length 256 chunkOffset 0 chunkSize 134217728 2025/05/18 06:47:57 DEBUG : WaitForWriters: timeout=30s 2025/05/18 06:47:57 DEBUG : dir: Looking for writers 2025/05/18 06:47:57 DEBUG : file1: reading active writers 2025/05/18 06:47:57 DEBUG : : Looking for writers 2025/05/18 06:47:57 DEBUG : dir: reading active writers 2025/05/18 06:47:57 DEBUG : >WaitForWriters: 2025/05/18 06:47:58 DEBUG : pacer: Reducing sleep to 675ms 2025/05/18 06:47:58 DEBUG : pacer: Reducing sleep to 506.25ms 2025/05/18 06:47:59 DEBUG : pacer: Reducing sleep to 379.6875ms 2025/05/18 06:48:00 DEBUG : pacer: Reducing sleep to 284.765625ms 2025/05/18 06:48:00 DEBUG : pacer: Reducing sleep to 213.574218ms 2025/05/18 06:48:00 DEBUG : dir: Rmdir: contains trashed file: "file1" 2025/05/18 06:48:01 DEBUG : pacer: Reducing sleep to 160.180663ms 2025/05/18 06:48:01 DEBUG : pacer: Reducing sleep to 120.135497ms 2025/05/18 06:48:01 DEBUG : pacer: Reducing sleep to 100ms --- PASS: TestReadFileHandleFlush (14.28s) === RUN TestCaseSensitivity run.go:180: Remote "PikPak root 'rclone-test-qicuyib0buha'", Local "Local file system at /tmp/rclone1587632299", Modify Window "876000h0m0s" 2025/05/18 06:48:02 DEBUG : FiLeA: calculating gcid: failed to unwrap object from src: FiLeA 2025/05/18 06:48:02 DEBUG : FiLeA: gcid = ed1267439bbc430e2a3c002a4a39ac8869a858d5 2025/05/18 06:48:03 DEBUG : FiLeB: calculating gcid: failed to unwrap object from src: FiLeB 2025/05/18 06:48:03 DEBUG : FiLeB: gcid = c0a8962153624d521cfc28e9e9437c2a7ddddffd 2025/05/18 06:48:06 DEBUG : FilEb: calculating gcid: failed to unwrap object from src: FilEb 2025/05/18 06:48:06 DEBUG : FilEb: gcid = d9d37e3253e48da9b2bbbe117f2ddc5b8654d660 2025/05/18 06:48:07 INFO : PikPak root 'rclone-test-qicuyib0buha': poll-interval is not supported by this remote 2025/05/18 06:48:07 NOTICE: PikPak root 'rclone-test-qicuyib0buha': --vfs-cache-mode writes or full is recommended for this remote as it can't stream 2025/05/18 06:48:07 INFO : PikPak root 'rclone-test-qicuyib0buha': poll-interval is not supported by this remote 2025/05/18 06:48:07 NOTICE: PikPak root 'rclone-test-qicuyib0buha': --vfs-cache-mode writes or full is recommended for this remote as it can't stream 2025/05/18 06:48:07 DEBUG : FiLeA: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx 2025/05/18 06:48:07 DEBUG : FiLeA: Open: flags=O_RDONLY 2025/05/18 06:48:07 DEBUG : FiLeA: >Open: fd=FiLeA (r), err= 2025/05/18 06:48:07 DEBUG : FiLeA: >OpenFile: fd=FiLeA (r), err= 2025/05/18 06:48:07 DEBUG : FiLeA: ChunkedReader.openRange at 0 length 134217728 2025/05/18 06:48:08 DEBUG : pacer: low level retry 1/10 (error no link) 2025/05/18 06:48:08 DEBUG : pacer: Rate limited, increasing sleep to 200ms 2025/05/18 06:48:10 DEBUG : pacer: low level retry 2/10 (error no link) 2025/05/18 06:48:10 DEBUG : pacer: Rate limited, increasing sleep to 400ms 2025/05/18 06:48:11 DEBUG : pacer: low level retry 3/10 (error no link) 2025/05/18 06:48:11 DEBUG : pacer: Rate limited, increasing sleep to 800ms 2025/05/18 06:48:12 DEBUG : pacer: low level retry 4/10 (error no link) 2025/05/18 06:48:12 DEBUG : pacer: Rate limited, increasing sleep to 1.6s 2025/05/18 06:48:14 DEBUG : pacer: low level retry 5/10 (error no link) 2025/05/18 06:48:14 DEBUG : pacer: Rate limited, increasing sleep to 2s 2025/05/18 06:48:15 DEBUG : pacer: low level retry 6/10 (error no link) 2025/05/18 06:48:17 DEBUG : pacer: low level retry 7/10 (error no link) 2025/05/18 06:48:19 DEBUG : pacer: low level retry 8/10 (error no link) 2025/05/18 06:48:21 DEBUG : pacer: low level retry 9/10 (error no link) 2025/05/18 06:48:23 DEBUG : pacer: low level retry 10/10 (error no link) vfs_case_test.go:147: Error Trace: /home/rclone/go/src/github.com/rclone/rclone/vfs/vfs_case_test.go:147 /home/rclone/go/src/github.com/rclone/rclone/vfs/vfs_case_test.go:48 Error: Received unexpected error: can't download: no link Test: TestCaseSensitivity vfs_case_test.go:148: Error Trace: /home/rclone/go/src/github.com/rclone/rclone/vfs/vfs_case_test.go:148 /home/rclone/go/src/github.com/rclone/rclone/vfs/vfs_case_test.go:48 Error: Not equal: expected: 0 actual : 5 Test: TestCaseSensitivity vfs_case_test.go:150: Error Trace: /home/rclone/go/src/github.com/rclone/rclone/vfs/vfs_case_test.go:150 /home/rclone/go/src/github.com/rclone/rclone/vfs/vfs_case_test.go:48 Error: Not equal: expected: "\x00\x00\x00\x00\x00" actual : "data1" Diff: --- Expected +++ Actual @@ -1 +1 @@ - +data1 Test: TestCaseSensitivity 2025/05/18 06:48:23 DEBUG : FiLeA: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx 2025/05/18 06:48:24 DEBUG : pacer: Reducing sleep to 1.5s 2025/05/18 06:48:24 DEBUG : FiLeA: Open: flags=O_RDONLY 2025/05/18 06:48:24 DEBUG : FiLeA: >Open: fd=FiLeA (r), err= 2025/05/18 06:48:24 DEBUG : FiLeA: >OpenFile: fd=FiLeA (r), err= 2025/05/18 06:48:24 DEBUG : FiLeA: ChunkedReader.openRange at 0 length 134217728 2025/05/18 06:48:27 DEBUG : pacer: low level retry 1/10 (error no link) 2025/05/18 06:48:27 DEBUG : pacer: Rate limited, increasing sleep to 2s 2025/05/18 06:48:29 DEBUG : pacer: low level retry 2/10 (error no link) 2025/05/18 06:48:31 DEBUG : pacer: low level retry 3/10 (error no link) 2025/05/18 06:48:32 DEBUG : pacer: Reducing sleep to 1.5s 2025/05/18 06:48:35 DEBUG : pacer: Reducing sleep to 1.125s 2025/05/18 06:48:35 DEBUG : FiLeA: ChunkedReader.Read at 0 length 5 chunkOffset 0 chunkSize 134217728 2025/05/18 06:48:35 DEBUG : FiLeA: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx 2025/05/18 06:48:35 DEBUG : FiLeA: Open: flags=O_RDONLY 2025/05/18 06:48:35 DEBUG : FiLeA: >Open: fd=FiLeA (r), err= 2025/05/18 06:48:35 DEBUG : FiLeA: >OpenFile: fd=FiLeA (r), err= 2025/05/18 06:48:35 DEBUG : FiLeA: ChunkedReader.openRange at 0 length 134217728 2025/05/18 06:48:35 DEBUG : pacer: Reducing sleep to 843.75ms 2025/05/18 06:48:35 DEBUG : FiLeA: ChunkedReader.Read at 0 length 5 chunkOffset 0 chunkSize 134217728 2025/05/18 06:48:35 DEBUG : FiLeB: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx 2025/05/18 06:48:35 DEBUG : FiLeB: Open: flags=O_RDONLY 2025/05/18 06:48:35 DEBUG : FiLeB: >Open: fd=FiLeB (r), err= 2025/05/18 06:48:35 DEBUG : FiLeB: >OpenFile: fd=FiLeB (r), err= 2025/05/18 06:48:35 DEBUG : FiLeB: ChunkedReader.openRange at 0 length 134217728 2025/05/18 06:48:37 DEBUG : pacer: low level retry 1/10 (error no link) 2025/05/18 06:48:37 DEBUG : pacer: Rate limited, increasing sleep to 1.6875s 2025/05/18 06:48:39 DEBUG : pacer: low level retry 2/10 (error no link) 2025/05/18 06:48:39 DEBUG : pacer: Rate limited, increasing sleep to 2s 2025/05/18 06:48:40 DEBUG : pacer: low level retry 3/10 (error no link) 2025/05/18 06:48:42 DEBUG : pacer: low level retry 4/10 (error no link) 2025/05/18 06:48:44 DEBUG : pacer: low level retry 5/10 (error no link) 2025/05/18 06:48:47 DEBUG : pacer: low level retry 6/10 (error no link) 2025/05/18 06:48:48 DEBUG : pacer: low level retry 7/10 (error no link) 2025/05/18 06:48:50 DEBUG : pacer: low level retry 8/10 (error no link) 2025/05/18 06:48:52 DEBUG : pacer: low level retry 9/10 (error no link) 2025/05/18 06:48:54 DEBUG : pacer: low level retry 10/10 (error no link) 2025/05/18 06:48:54 DEBUG : FilEb: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx 2025/05/18 06:48:54 DEBUG : FilEb: Open: flags=O_RDONLY 2025/05/18 06:48:54 DEBUG : FilEb: >Open: fd=FilEb (r), err= 2025/05/18 06:48:54 DEBUG : FilEb: >OpenFile: fd=FilEb (r), err= 2025/05/18 06:48:54 DEBUG : FilEb: ChunkedReader.openRange at 0 length 134217728 2025/05/18 06:48:56 DEBUG : pacer: low level retry 1/10 (error no link) 2025/05/18 06:48:58 DEBUG : pacer: low level retry 2/10 (error no link) 2025/05/18 06:49:00 DEBUG : pacer: low level retry 3/10 (error no link) 2025/05/18 06:49:02 DEBUG : pacer: low level retry 4/10 (error no link) 2025/05/18 06:49:04 DEBUG : pacer: low level retry 5/10 (error no link) 2025/05/18 06:49:06 DEBUG : pacer: low level retry 6/10 (error no link) 2025/05/18 06:49:08 DEBUG : pacer: low level retry 7/10 (error no link) 2025/05/18 06:49:11 DEBUG : pacer: low level retry 8/10 (error no link) 2025/05/18 06:49:12 DEBUG : pacer: low level retry 9/10 (error no link) 2025/05/18 06:49:14 DEBUG : pacer: low level retry 10/10 (error no link) vfs_case_test.go:65: Can't test case sensitivity - this remote doesn't comply as case-sensitive 2025/05/18 06:49:14 DEBUG : WaitForWriters: timeout=30s 2025/05/18 06:49:14 DEBUG : : Looking for writers 2025/05/18 06:49:14 DEBUG : FiLeA: reading active writers 2025/05/18 06:49:14 DEBUG : FiLeB: reading active writers 2025/05/18 06:49:14 DEBUG : FilEb: reading active writers 2025/05/18 06:49:14 DEBUG : >WaitForWriters: 2025/05/18 06:49:14 DEBUG : WaitForWriters: timeout=30s 2025/05/18 06:49:14 DEBUG : : Looking for writers 2025/05/18 06:49:14 DEBUG : FiLeA: reading active writers 2025/05/18 06:49:14 DEBUG : FiLeB: reading active writers 2025/05/18 06:49:14 DEBUG : FilEb: reading active writers 2025/05/18 06:49:14 DEBUG : >WaitForWriters: 2025/05/18 06:49:15 DEBUG : pacer: Reducing sleep to 1.5s 2025/05/18 06:49:17 DEBUG : pacer: Reducing sleep to 1.125s 2025/05/18 06:49:19 DEBUG : pacer: Reducing sleep to 843.75ms 2025/05/18 06:49:20 DEBUG : pacer: Reducing sleep to 632.8125ms 2025/05/18 06:49:21 DEBUG : pacer: Reducing sleep to 474.609375ms 2025/05/18 06:49:21 DEBUG : pacer: Reducing sleep to 355.957031ms 2025/05/18 06:49:22 DEBUG : pacer: Reducing sleep to 266.967773ms 2025/05/18 06:49:22 DEBUG : pacer: Reducing sleep to 200.225829ms --- FAIL: TestCaseSensitivity (81.03s) === RUN TestUnicodeNormalization run.go:180: Remote "PikPak root 'rclone-test-qicuyib0buha'", Local "Local file system at /tmp/rclone1587632299", Modify Window "876000h0m0s" 2025/05/18 06:49:23 DEBUG : pacer: Reducing sleep to 150.169371ms 2025/05/18 06:49:23 DEBUG : normal name with no special characters.txt: calculating gcid: failed to unwrap object from src: normal name with no special characters.txt 2025/05/18 06:49:23 DEBUG : normal name with no special characters.txt: gcid = ed1267439bbc430e2a3c002a4a39ac8869a858d5 2025/05/18 06:49:24 DEBUG : pacer: Reducing sleep to 112.627028ms 2025/05/18 06:49:24 DEBUG : pacer: Reducing sleep to 100ms 2025/05/18 06:49:24 DEBUG : 測試_Русский___ě_áñ: calculating gcid: failed to unwrap object from src: 測試_Русский___ě_áñ 2025/05/18 06:49:24 DEBUG : 測試_Русский___ě_áñ: gcid = c0a8962153624d521cfc28e9e9437c2a7ddddffd 2025/05/18 06:49:26 INFO : PikPak root 'rclone-test-qicuyib0buha': poll-interval is not supported by this remote 2025/05/18 06:49:26 NOTICE: PikPak root 'rclone-test-qicuyib0buha': --vfs-cache-mode writes or full is recommended for this remote as it can't stream 2025/05/18 06:49:26 DEBUG : normal name with no special characters.txt: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx 2025/05/18 06:49:26 DEBUG : normal name with no special characters.txt: Open: flags=O_RDONLY 2025/05/18 06:49:26 DEBUG : normal name with no special characters.txt: >Open: fd=normal name with no special characters.txt (r), err= 2025/05/18 06:49:26 DEBUG : normal name with no special characters.txt: >OpenFile: fd=normal name with no special characters.txt (r), err= 2025/05/18 06:49:26 DEBUG : normal name with no special characters.txt: ChunkedReader.openRange at 0 length 134217728 2025/05/18 06:49:27 DEBUG : pacer: low level retry 1/10 (error no link) 2025/05/18 06:49:27 DEBUG : pacer: Rate limited, increasing sleep to 200ms 2025/05/18 06:49:29 DEBUG : pacer: low level retry 2/10 (error no link) 2025/05/18 06:49:29 DEBUG : pacer: Rate limited, increasing sleep to 400ms 2025/05/18 06:49:30 DEBUG : pacer: low level retry 3/10 (error no link) 2025/05/18 06:49:30 DEBUG : pacer: Rate limited, increasing sleep to 800ms 2025/05/18 06:49:31 DEBUG : pacer: low level retry 4/10 (error no link) 2025/05/18 06:49:31 DEBUG : pacer: Rate limited, increasing sleep to 1.6s 2025/05/18 06:49:32 DEBUG : pacer: Reducing sleep to 1.2s 2025/05/18 06:49:34 DEBUG : pacer: Reducing sleep to 900ms 2025/05/18 06:49:34 DEBUG : normal name with no special characters.txt: ChunkedReader.Read at 0 length 5 chunkOffset 0 chunkSize 134217728 2025/05/18 06:49:34 DEBUG : 測試_Русский___ě_áñ: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx 2025/05/18 06:49:34 DEBUG : 測試_Русский___ě_áñ: Open: flags=O_RDONLY 2025/05/18 06:49:34 DEBUG : 測試_Русский___ě_áñ: >Open: fd=測試_Русский___ě_áñ (r), err= 2025/05/18 06:49:34 DEBUG : 測試_Русский___ě_áñ: >OpenFile: fd=測試_Русский___ě_áñ (r), err= 2025/05/18 06:49:34 DEBUG : 測試_Русский___ě_áñ: ChunkedReader.openRange at 0 length 134217728 2025/05/18 06:49:35 DEBUG : pacer: low level retry 1/10 (error no link) 2025/05/18 06:49:35 DEBUG : pacer: Rate limited, increasing sleep to 1.8s 2025/05/18 06:49:37 DEBUG : pacer: low level retry 2/10 (error no link) 2025/05/18 06:49:37 DEBUG : pacer: Rate limited, increasing sleep to 2s 2025/05/18 06:49:38 DEBUG : pacer: low level retry 3/10 (error no link) 2025/05/18 06:49:40 DEBUG : pacer: low level retry 4/10 (error no link) 2025/05/18 06:49:42 DEBUG : pacer: Reducing sleep to 1.5s 2025/05/18 06:49:43 DEBUG : pacer: Reducing sleep to 1.125s 2025/05/18 06:49:43 DEBUG : 測試_Русский___ě_áñ: ChunkedReader.Read at 0 length 5 chunkOffset 0 chunkSize 134217728 2025/05/18 06:49:43 DEBUG : normal name with no special characters.txt: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx 2025/05/18 06:49:43 DEBUG : normal name with no special characters.txt: Open: flags=O_RDONLY 2025/05/18 06:49:43 DEBUG : normal name with no special characters.txt: >Open: fd=normal name with no special characters.txt (r), err= 2025/05/18 06:49:43 DEBUG : normal name with no special characters.txt: >OpenFile: fd=normal name with no special characters.txt (r), err= 2025/05/18 06:49:43 DEBUG : normal name with no special characters.txt: ChunkedReader.openRange at 0 length 134217728 2025/05/18 06:49:45 DEBUG : pacer: Reducing sleep to 843.75ms 2025/05/18 06:49:45 DEBUG : normal name with no special characters.txt: ChunkedReader.Read at 0 length 5 chunkOffset 0 chunkSize 134217728 2025/05/18 06:49:45 DEBUG : 測試_Русский___ě_áñ: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx 2025/05/18 06:49:45 DEBUG : 測試_Русский___ě_áñ: >OpenFile: fd=, err=file does not exist 2025/05/18 06:49:45 DEBUG : WaitForWriters: timeout=30s 2025/05/18 06:49:45 DEBUG : : Looking for writers 2025/05/18 06:49:45 DEBUG : normal name with no special characters.txt: reading active writers 2025/05/18 06:49:45 DEBUG : 測試_Русский___ě_áñ: reading active writers 2025/05/18 06:49:45 DEBUG : >WaitForWriters: 2025/05/18 06:49:46 DEBUG : pacer: Reducing sleep to 632.8125ms 2025/05/18 06:49:47 DEBUG : pacer: Reducing sleep to 474.609375ms 2025/05/18 06:49:47 DEBUG : pacer: Reducing sleep to 355.957031ms 2025/05/18 06:49:48 DEBUG : pacer: Reducing sleep to 266.967773ms 2025/05/18 06:49:49 DEBUG : pacer: Reducing sleep to 200.225829ms 2025/05/18 06:49:49 DEBUG : pacer: Reducing sleep to 150.169371ms --- PASS: TestUnicodeNormalization (26.44s) === RUN TestFileReadAtNonZeroLength run.go:180: Remote "PikPak root 'rclone-test-qicuyib0buha'", Local "Local file system at /tmp/rclone1587632299", Modify Window "876000h0m0s" 2025/05/18 06:49:49 INFO : PikPak root 'rclone-test-qicuyib0buha': poll-interval is not supported by this remote 2025/05/18 06:49:49 NOTICE: PikPak root 'rclone-test-qicuyib0buha': --vfs-cache-mode writes or full is recommended for this remote as it can't stream 2025/05/18 06:49:49 DEBUG : file1: OpenFile: flags=O_WRONLY|O_CREATE, perm=-rwxrwxrwx 2025/05/18 06:49:49 DEBUG : pacer: Reducing sleep to 112.627028ms 2025/05/18 06:49:49 DEBUG : file1: Open: flags=O_WRONLY|O_CREATE 2025/05/18 06:49:49 DEBUG : : Added virtual directory entry vAddFile: "file1" 2025/05/18 06:49:49 DEBUG : file1: >Open: fd=file1 (w), err= 2025/05/18 06:49:49 DEBUG : file1: >OpenFile: fd=file1 (w), err= 2025/05/18 06:49:49 DEBUG : : Added virtual directory entry vAddFile: "file1" 2025/05/18 06:49:49 DEBUG : PikPak root 'rclone-test-qicuyib0buha': File to upload is small (100 bytes), uploading instead of streaming 2025/05/18 06:49:49 DEBUG : pacer: Reducing sleep to 100ms 2025/05/18 06:49:49 DEBUG : file1: calculating gcid: failed to unwrap object from src: file1 2025/05/18 06:49:49 DEBUG : file1: gcid = f9058c896e35650b85bd9f95d6997a241dc44e85 2025/05/18 06:49:51 DEBUG : file1: canceling upload: failed to upload: operation error S3: PutObject, https response error StatusCode: 400, RequestID: 6829830FE9CC4C35350CD53B, HostID: vip-lixian-07.mypikpak.com, api error InvalidArgument: aws-chunked encoding is not supported with the specified x-amz-content-sha256 value. 2025/05/18 06:49:52 DEBUG : file1: waiting 500ms for the cancellation to be effective 2025/05/18 06:49:52 ERROR : file1: WriteFileHandle.New Rcat failed: failed to upload: operation error S3: PutObject, https response error StatusCode: 400, RequestID: 6829830FE9CC4C35350CD53B, HostID: vip-lixian-07.mypikpak.com, api error InvalidArgument: aws-chunked encoding is not supported with the specified x-amz-content-sha256 value. 2025/05/18 06:49:52 DEBUG : file1: Remove: 2025/05/18 06:49:52 DEBUG : : Added virtual directory entry vDel: "file1" 2025/05/18 06:49:52 DEBUG : file1: >Remove: err= write_test.go:360: Error Trace: /home/rclone/go/src/github.com/rclone/rclone/vfs/write_test.go:360 /home/rclone/go/src/github.com/rclone/rclone/vfs/write_test.go:384 Error: Received unexpected error: failed to upload: operation error S3: PutObject, https response error StatusCode: 400, RequestID: 6829830FE9CC4C35350CD53B, HostID: vip-lixian-07.mypikpak.com, api error InvalidArgument: aws-chunked encoding is not supported with the specified x-amz-content-sha256 value. Test: TestFileReadAtNonZeroLength 2025/05/18 06:49:52 DEBUG : file1: OpenFile: flags=O_RDONLY, perm=---------- 2025/05/18 06:49:52 DEBUG : file1: >OpenFile: fd=, err=file does not exist write_test.go:365: Error Trace: /home/rclone/go/src/github.com/rclone/rclone/vfs/write_test.go:365 /home/rclone/go/src/github.com/rclone/rclone/vfs/write_test.go:384 Error: Received unexpected error: file does not exist Test: TestFileReadAtNonZeroLength 2025/05/18 06:49:52 DEBUG : WaitForWriters: timeout=30s 2025/05/18 06:49:52 DEBUG : : Looking for writers 2025/05/18 06:49:52 DEBUG : >WaitForWriters: --- FAIL: TestFileReadAtNonZeroLength (3.92s) FAIL 2025/05/18 06:49:53 DEBUG : PikPak root 'rclone-test-qicuyib0buha': Purge remote "./vfs.test -test.v -test.timeout 1h0m0s -remote TestPikPak: -verbose -test.run '^(TestCaseSensitivity|TestFileReadAtNonZeroLength|TestReadFileHandleFlush|TestReadFileHandleSeek|TestUnicodeNormalization)$'" - Finished ERROR in 2m18.11435178s (try 2/5): exit status 1: Failed [TestCaseSensitivity TestFileReadAtNonZeroLength]