"./vfs.test -test.v -test.timeout 1h0m0s -remote TestChunkerChunk50bYandex: -verbose -size-limit 1024 -test.run '^(TestFileOpenRead|TestReadFileHandleReadAt)$'" - Starting (try 2/5)
2025/05/12 06:47:24 DEBUG : Creating backend with remote "TestChunkerChunk50bYandex:rclone-test-megixis2cuye"
2025/05/12 06:47:24 DEBUG : Using config file from "/home/rclone/.rclone.conf"
2025/05/12 06:47:24 DEBUG : Creating backend with remote "TestYandex:rclone-test-megixis2cuye"
2025/05/12 06:47:24 DEBUG : Creating backend with remote "/tmp/rclone984443660"
=== RUN   TestFileOpenRead
    run.go:180: Remote "Chunked 'TestChunkerChunk50bYandex:rclone-test-megixis2cuye'", Local "Local file system at /tmp/rclone984443660", Modify Window "1ns"
2025/05/12 06:47:24 INFO  : Chunked 'TestChunkerChunk50bYandex:rclone-test-megixis2cuye': poll-interval is not supported by this remote
2025/05/12 06:47:35 INFO  : dir/file1.rclone_chunk.001_54h9lj: Moved (server-side) to: dir/file1
2025/05/12 06:47:36 DEBUG : dir/file1: Open: flags=O_RDONLY
2025/05/12 06:47:36 DEBUG : dir/file1: >Open: fd=dir/file1 (r), err=<nil>
2025/05/12 06:47:36 DEBUG : dir/file1: ChunkedReader.openRange at 0 length 134217728
2025/05/12 06:47:37 DEBUG : dir/file1: ChunkedReader.Read at 0 length 512 chunkOffset 0 chunkSize 134217728
2025/05/12 06:47:37 DEBUG : WaitForWriters: timeout=30s
2025/05/12 06:47:37 DEBUG : dir: Looking for writers
2025/05/12 06:47:37 DEBUG : file1: reading active writers
2025/05/12 06:47:37 DEBUG : : Looking for writers
2025/05/12 06:47:37 DEBUG : dir: reading active writers
2025/05/12 06:47:37 DEBUG : >WaitForWriters: 
--- PASS: TestFileOpenRead (24.00s)
=== RUN   TestReadFileHandleReadAt
    run.go:180: Remote "Chunked 'TestChunkerChunk50bYandex:rclone-test-megixis2cuye'", Local "Local file system at /tmp/rclone984443660", Modify Window "1ns"
2025/05/12 06:47:48 INFO  : Chunked 'TestChunkerChunk50bYandex:rclone-test-megixis2cuye': poll-interval is not supported by this remote
2025/05/12 06:47:54 INFO  : dir/file1.rclone_chunk.001_54hwqb: Moved (server-side) to: dir/file1
2025/05/12 06:47:54 DEBUG : dir/file1: OpenFile: flags=O_RDONLY, perm=-rwxrwxrwx
2025/05/12 06:47:55 DEBUG : dir/file1: Open: flags=O_RDONLY
2025/05/12 06:47:55 DEBUG : dir/file1: >Open: fd=dir/file1 (r), err=<nil>
2025/05/12 06:47:55 DEBUG : dir/file1: >OpenFile: fd=dir/file1 (r), err=<nil>
2025/05/12 06:47:55 DEBUG : dir/file1: ChunkedReader.openRange at 0 length 134217728
2025/05/12 06:47:56 DEBUG : dir/file1: ChunkedReader.Read at 0 length 1 chunkOffset 0 chunkSize 134217728
2025/05/12 06:47:56 DEBUG : dir/file1: waiting for in-sequence read to 5 for 20ms
2025/05/12 06:47:56 DEBUG : dir/file1: aborting in-sequence read wait, off=5
2025/05/12 06:47:56 DEBUG : dir/file1: failed to wait for in-sequence read to 5
2025/05/12 06:47:56 DEBUG : dir/file1: ReadFileHandle.seek from 1 to 5 (fs.RangeSeeker)
2025/05/12 06:47:56 DEBUG : dir/file1: ChunkedReader.RangeSeek from 1 to 5 length -1
2025/05/12 06:47:56 DEBUG : dir/file1: ChunkedReader.Read at -1 length 1 chunkOffset 5 chunkSize 134217728
2025/05/12 06:47:56 DEBUG : dir/file1: ChunkedReader.openRange at 5 length 134217728
2025/05/12 06:47:56 DEBUG : dir/file1: ReadFileHandle.seek from 6 to 1 (fs.RangeSeeker)
2025/05/12 06:47:56 DEBUG : dir/file1: ChunkedReader.RangeSeek from 6 to 1 length -1
2025/05/12 06:47:56 DEBUG : dir/file1: ChunkedReader.Read at -1 length 1 chunkOffset 1 chunkSize 134217728
2025/05/12 06:47:56 DEBUG : dir/file1: ChunkedReader.openRange at 1 length 134217728
2025/05/12 06:48:01 DEBUG : dir/file1: waiting for in-sequence read to 10 for 20ms
2025/05/12 06:48:01 DEBUG : dir/file1: aborting in-sequence read wait, off=10
2025/05/12 06:48:01 DEBUG : dir/file1: failed to wait for in-sequence read to 10
2025/05/12 06:48:01 DEBUG : dir/file1: ReadFileHandle.seek from 2 to 10 (fs.RangeSeeker)
2025/05/12 06:48:01 DEBUG : dir/file1: ChunkedReader.RangeSeek from 2 to 10 length -1
2025/05/12 06:48:01 DEBUG : dir/file1: ChunkedReader.Read at -1 length 6 chunkOffset 10 chunkSize 134217728
2025/05/12 06:48:01 DEBUG : dir/file1: ChunkedReader.openRange at 10 length 134217728
2025/05/12 06:48:01 DEBUG : dir/file1: ReadFileHandle.seek from 16 to 10 (fs.RangeSeeker)
2025/05/12 06:48:01 DEBUG : dir/file1: ChunkedReader.RangeSeek from 16 to 10 length -1
2025/05/12 06:48:01 DEBUG : dir/file1: ChunkedReader.Read at -1 length 256 chunkOffset 10 chunkSize 134217728
2025/05/12 06:48:01 DEBUG : dir/file1: ChunkedReader.openRange at 10 length 134217728
2025/05/12 06:48:02 DEBUG : dir/file1: waiting for in-sequence read to 100 for 20ms
2025/05/12 06:48:02 DEBUG : dir/file1: aborting in-sequence read wait, off=100
2025/05/12 06:48:02 DEBUG : dir/file1: failed to wait for in-sequence read to 100
2025/05/12 06:48:02 DEBUG : dir/file1: ReadFileHandle.Read attempt to read beyond end of file: 100 > 16
2025/05/12 06:48:02 DEBUG : dir/file1: waiting for in-sequence read to 100 for 20ms
2025/05/12 06:48:02 DEBUG : dir/file1: aborting in-sequence read wait, off=100
2025/05/12 06:48:02 DEBUG : dir/file1: failed to wait for in-sequence read to 100
2025/05/12 06:48:02 ERROR : dir/file1: ReadFileHandle.Read error: Bad file descriptor
2025/05/12 06:48:02 DEBUG : WaitForWriters: timeout=30s
2025/05/12 06:48:02 DEBUG : dir: Looking for writers
2025/05/12 06:48:02 DEBUG : file1: reading active writers
2025/05/12 06:48:02 DEBUG : : Looking for writers
2025/05/12 06:48:02 DEBUG : dir: reading active writers
2025/05/12 06:48:02 DEBUG : >WaitForWriters: 
--- PASS: TestReadFileHandleReadAt (24.62s)
PASS
2025/05/12 06:48:13 DEBUG : Chunked 'TestChunkerChunk50bYandex:rclone-test-megixis2cuye': Purge remote
"./vfs.test -test.v -test.timeout 1h0m0s -remote TestChunkerChunk50bYandex: -verbose -size-limit 1024 -test.run '^(TestFileOpenRead|TestReadFileHandleReadAt)$'" - Finished OK in 54.570033701s (try 2/5)