"./operations.test -test.v -test.timeout 1h0m0s -remote TestMailru: -verbose" - Starting (try 1/5)
2025/01/28 02:21:22 DEBUG : Creating backend with remote "TestMailru:rclone-test-qupolaq2sumi"
2025/01/28 02:21:22 DEBUG : Using config file from "/home/rclone/.rclone.conf"
2025/01/28 02:21:22 DEBUG : Creating backend with remote "/tmp/rclone855981153"
=== RUN   TestDoMultiThreadCopy
--- PASS: TestDoMultiThreadCopy (0.00s)
=== RUN   TestMultithreadCalculateNumChunks
=== RUN   TestMultithreadCalculateNumChunks/{size:1_chunkSize:65536_wantNumChunks:1}
=== RUN   TestMultithreadCalculateNumChunks/{size:1048576_chunkSize:1_wantNumChunks:1048576}
=== RUN   TestMultithreadCalculateNumChunks/{size:1048576_chunkSize:2_wantNumChunks:524288}
=== RUN   TestMultithreadCalculateNumChunks/{size:1048577_chunkSize:2_wantNumChunks:524289}
=== RUN   TestMultithreadCalculateNumChunks/{size:1048575_chunkSize:2_wantNumChunks:524288}
--- PASS: TestMultithreadCalculateNumChunks (0.00s)
    --- PASS: TestMultithreadCalculateNumChunks/{size:1_chunkSize:65536_wantNumChunks:1} (0.00s)
    --- PASS: TestMultithreadCalculateNumChunks/{size:1048576_chunkSize:1_wantNumChunks:1048576} (0.00s)
    --- PASS: TestMultithreadCalculateNumChunks/{size:1048576_chunkSize:2_wantNumChunks:524288} (0.00s)
    --- PASS: TestMultithreadCalculateNumChunks/{size:1048577_chunkSize:2_wantNumChunks:524289} (0.00s)
    --- PASS: TestMultithreadCalculateNumChunks/{size:1048575_chunkSize:2_wantNumChunks:524288} (0.00s)
=== RUN   TestMultithreadCopy
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
    multithread_test.go:121: multithread writing not supported
2025/01/28 02:21:22 ERROR : : error listing: directory not found
--- SKIP: TestMultithreadCopy (0.07s)
=== RUN   TestMultithreadCopyAbort
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
    multithread_test.go:121: multithread writing not supported
2025/01/28 02:21:22 ERROR : : error listing: directory not found
--- SKIP: TestMultithreadCopyAbort (0.10s)
=== RUN   TestSizeDiffers
--- PASS: TestSizeDiffers (0.00s)
=== RUN   TestReOpen
=== RUN   TestReOpen/Normal
=== RUN   TestReOpen/Normal/Basics
2025/01/28 02:21:22 DEBUG : potato: Seek from 10 to 0
=== RUN   TestReOpen/Normal/ErrorAtStart
=== RUN   TestReOpen/Normal/WithErrors
2025/01/28 02:21:22 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 1/10: test error
2025/01/28 02:21:22 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 2/10: test error
2025/01/28 02:21:22 DEBUG : potato: Reopening on read failure after offset 6 bytes: retry 3/10: test error
=== RUN   TestReOpen/Normal/TooManyErrors
2025/01/28 02:21:22 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 1/3: test error
2025/01/28 02:21:22 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 2/3: test error
2025/01/28 02:21:22 DEBUG : potato: Reopening on read failure after offset 6 bytes: retry 3/3: test error
2025/01/28 02:21:22 DEBUG : potato: Reopen failed after offset 6 bytes read: failed to reopen: too many retries
=== RUN   TestReOpen/Normal/Seek
2025/01/28 02:21:22 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 0/10: test error
2025/01/28 02:21:22 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 1/10: test error
2025/01/28 02:21:22 DEBUG : potato: Seek from 5 to 2
=== RUN   TestReOpen/Normal/AccountRead
=== RUN   TestReOpen/Normal/AccountReadDelay
2025/01/28 02:21:22 DEBUG : potato: Seek from 10 to 0
2025/01/28 02:21:22 DEBUG : potato: Seek from 10 to 0
2025/01/28 02:21:22 DEBUG : potato: Seek from 10 to 0
=== RUN   TestReOpen/Normal/AccountReadError
=== RUN   TestReOpen/WithRangeOption
=== RUN   TestReOpen/WithRangeOption/Basics
2025/01/28 02:21:22 DEBUG : potato: Seek from 7 to 0
=== RUN   TestReOpen/WithRangeOption/ErrorAtStart
=== RUN   TestReOpen/WithRangeOption/WithErrors
2025/01/28 02:21:22 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 1/10: test error
2025/01/28 02:21:22 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 2/10: test error
2025/01/28 02:21:22 DEBUG : potato: Reopening on read failure after offset 6 bytes: retry 3/10: test error
=== RUN   TestReOpen/WithRangeOption/TooManyErrors
2025/01/28 02:21:22 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 1/3: test error
2025/01/28 02:21:22 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 2/3: test error
2025/01/28 02:21:22 DEBUG : potato: Reopening on read failure after offset 6 bytes: retry 3/3: test error
2025/01/28 02:21:22 DEBUG : potato: Reopen failed after offset 6 bytes read: failed to reopen: too many retries
=== RUN   TestReOpen/WithRangeOption/Seek
2025/01/28 02:21:22 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 0/10: test error
2025/01/28 02:21:22 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 1/10: test error
2025/01/28 02:21:22 DEBUG : potato: Seek from 5 to 2
2025/01/28 02:21:22 DEBUG : potato: Seek from 7 to 4
=== RUN   TestReOpen/WithRangeOption/AccountRead
=== RUN   TestReOpen/WithRangeOption/AccountReadDelay
2025/01/28 02:21:22 DEBUG : potato: Seek from 7 to 0
2025/01/28 02:21:22 DEBUG : potato: Seek from 7 to 0
2025/01/28 02:21:22 DEBUG : potato: Seek from 7 to 0
=== RUN   TestReOpen/WithRangeOption/AccountReadError
=== RUN   TestReOpen/WithSeekOption
=== RUN   TestReOpen/WithSeekOption/Basics
2025/01/28 02:21:22 DEBUG : potato: Seek from 8 to 0
=== RUN   TestReOpen/WithSeekOption/ErrorAtStart
=== RUN   TestReOpen/WithSeekOption/WithErrors
2025/01/28 02:21:22 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 1/10: test error
2025/01/28 02:21:22 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 2/10: test error
2025/01/28 02:21:22 DEBUG : potato: Reopening on read failure after offset 6 bytes: retry 3/10: test error
=== RUN   TestReOpen/WithSeekOption/TooManyErrors
2025/01/28 02:21:22 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 1/3: test error
2025/01/28 02:21:22 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 2/3: test error
2025/01/28 02:21:22 DEBUG : potato: Reopening on read failure after offset 6 bytes: retry 3/3: test error
2025/01/28 02:21:22 DEBUG : potato: Reopen failed after offset 6 bytes read: failed to reopen: too many retries
=== RUN   TestReOpen/WithSeekOption/Seek
2025/01/28 02:21:22 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 0/10: test error
2025/01/28 02:21:22 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 1/10: test error
2025/01/28 02:21:22 DEBUG : potato: Seek from 5 to 2
2025/01/28 02:21:22 DEBUG : potato: Seek from 7 to 5
=== RUN   TestReOpen/WithSeekOption/AccountRead
=== RUN   TestReOpen/WithSeekOption/AccountReadDelay
2025/01/28 02:21:22 DEBUG : potato: Seek from 8 to 0
2025/01/28 02:21:22 DEBUG : potato: Seek from 8 to 0
2025/01/28 02:21:22 DEBUG : potato: Seek from 8 to 0
=== RUN   TestReOpen/WithSeekOption/AccountReadError
=== RUN   TestReOpen/UnknownSize
=== RUN   TestReOpen/UnknownSize/Basics
2025/01/28 02:21:22 DEBUG : potato: Seek from 9 to 0
=== RUN   TestReOpen/UnknownSize/ErrorAtStart
=== RUN   TestReOpen/UnknownSize/WithErrors
2025/01/28 02:21:22 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 1/10: test error
2025/01/28 02:21:22 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 2/10: test error
2025/01/28 02:21:22 DEBUG : potato: Reopening on read failure after offset 6 bytes: retry 3/10: test error
=== RUN   TestReOpen/UnknownSize/TooManyErrors
2025/01/28 02:21:22 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 1/3: test error
2025/01/28 02:21:22 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 2/3: test error
2025/01/28 02:21:22 DEBUG : potato: Reopening on read failure after offset 6 bytes: retry 3/3: test error
2025/01/28 02:21:22 DEBUG : potato: Reopen failed after offset 6 bytes read: failed to reopen: too many retries
=== RUN   TestReOpen/UnknownSize/Seek
2025/01/28 02:21:22 DEBUG : potato: Reopening on read failure after offset 2 bytes: retry 0/10: test error
2025/01/28 02:21:22 DEBUG : potato: Reopening on read failure after offset 3 bytes: retry 1/10: test error
2025/01/28 02:21:22 DEBUG : potato: Seek from 5 to 2
2025/01/28 02:21:22 DEBUG : potato: Seek from 7 to 6
=== RUN   TestReOpen/UnknownSize/AccountRead
=== RUN   TestReOpen/UnknownSize/AccountReadDelay
2025/01/28 02:21:22 DEBUG : potato: Seek from 9 to 0
2025/01/28 02:21:22 DEBUG : potato: Seek from 9 to 0
2025/01/28 02:21:22 DEBUG : potato: Seek from 9 to 0
=== RUN   TestReOpen/UnknownSize/AccountReadError
--- PASS: TestReOpen (0.00s)
    --- PASS: TestReOpen/Normal (0.00s)
        --- PASS: TestReOpen/Normal/Basics (0.00s)
        --- PASS: TestReOpen/Normal/ErrorAtStart (0.00s)
        --- PASS: TestReOpen/Normal/WithErrors (0.00s)
        --- PASS: TestReOpen/Normal/TooManyErrors (0.00s)
        --- PASS: TestReOpen/Normal/Seek (0.00s)
        --- PASS: TestReOpen/Normal/AccountRead (0.00s)
        --- PASS: TestReOpen/Normal/AccountReadDelay (0.00s)
        --- PASS: TestReOpen/Normal/AccountReadError (0.00s)
    --- PASS: TestReOpen/WithRangeOption (0.00s)
        --- PASS: TestReOpen/WithRangeOption/Basics (0.00s)
        --- PASS: TestReOpen/WithRangeOption/ErrorAtStart (0.00s)
        --- PASS: TestReOpen/WithRangeOption/WithErrors (0.00s)
        --- PASS: TestReOpen/WithRangeOption/TooManyErrors (0.00s)
        --- PASS: TestReOpen/WithRangeOption/Seek (0.00s)
        --- PASS: TestReOpen/WithRangeOption/AccountRead (0.00s)
        --- PASS: TestReOpen/WithRangeOption/AccountReadDelay (0.00s)
        --- PASS: TestReOpen/WithRangeOption/AccountReadError (0.00s)
    --- PASS: TestReOpen/WithSeekOption (0.00s)
        --- PASS: TestReOpen/WithSeekOption/Basics (0.00s)
        --- PASS: TestReOpen/WithSeekOption/ErrorAtStart (0.00s)
        --- PASS: TestReOpen/WithSeekOption/WithErrors (0.00s)
        --- PASS: TestReOpen/WithSeekOption/TooManyErrors (0.00s)
        --- PASS: TestReOpen/WithSeekOption/Seek (0.00s)
        --- PASS: TestReOpen/WithSeekOption/AccountRead (0.00s)
        --- PASS: TestReOpen/WithSeekOption/AccountReadDelay (0.00s)
        --- PASS: TestReOpen/WithSeekOption/AccountReadError (0.00s)
    --- PASS: TestReOpen/UnknownSize (0.00s)
        --- PASS: TestReOpen/UnknownSize/Basics (0.00s)
        --- PASS: TestReOpen/UnknownSize/ErrorAtStart (0.00s)
        --- PASS: TestReOpen/UnknownSize/WithErrors (0.00s)
        --- PASS: TestReOpen/UnknownSize/TooManyErrors (0.00s)
        --- PASS: TestReOpen/UnknownSize/Seek (0.00s)
        --- PASS: TestReOpen/UnknownSize/AccountRead (0.00s)
        --- PASS: TestReOpen/UnknownSize/AccountReadDelay (0.00s)
        --- PASS: TestReOpen/UnknownSize/AccountReadError (0.00s)
=== RUN   TestCheck
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
2025/01/28 02:21:22 DEBUG : [rclone-test-qupolaq2sumi]: new meta server: https://cld-extapi.datacloudmail.ru/meta/
=== RUN   TestCheck/1
=== RUN   TestCheck/2
=== RUN   TestCheck/3
2025/01/28 02:21:24 DEBUG : potato2: File has been put by hash from source
=== RUN   TestCheck/4
=== RUN   TestCheck/5
2025/01/28 02:21:24 DEBUG : remotepotato: File has been put by hash from source
=== RUN   TestCheck/6
=== RUN   TestCheck/7
--- PASS: TestCheck (3.22s)
    --- PASS: TestCheck/1 (0.08s)
    --- PASS: TestCheck/2 (0.10s)
    --- PASS: TestCheck/3 (0.11s)
    --- PASS: TestCheck/4 (0.08s)
    --- PASS: TestCheck/5 (0.11s)
    --- PASS: TestCheck/6 (0.12s)
    --- PASS: TestCheck/7 (0.13s)
=== RUN   TestCheckFsError
2025/01/28 02:21:25 DEBUG : Creating backend with remote "nonexistent"
2025/01/28 02:21:25 DEBUG : Creating backend with remote "nonexistent"
2025/01/28 02:21:25 DEBUG : Local file system at /home/rclone/go/src/github.com/rclone/rclone/fs/operations/nonexistent: Waiting for checks to finish
2025/01/28 02:21:25 ERROR : Local file system at /home/rclone/go/src/github.com/rclone/rclone/fs/operations/nonexistent: error reading source root directory: directory not found
2025/01/28 02:21:25 NOTICE: Local file system at /home/rclone/go/src/github.com/rclone/rclone/fs/operations/nonexistent: 2 differences found
2025/01/28 02:21:25 NOTICE: Local file system at /home/rclone/go/src/github.com/rclone/rclone/fs/operations/nonexistent: 2 errors while checking
--- PASS: TestCheckFsError (0.00s)
=== RUN   TestCheckDownload
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
=== RUN   TestCheckDownload/1
=== RUN   TestCheckDownload/2
=== RUN   TestCheckDownload/3
2025/01/28 02:21:27 DEBUG : potato2: File has been put by hash from source
=== RUN   TestCheckDownload/4
=== RUN   TestCheckDownload/5
2025/01/28 02:21:28 DEBUG : remotepotato: File has been put by hash from source
=== RUN   TestCheckDownload/6
=== RUN   TestCheckDownload/7
--- PASS: TestCheckDownload (3.83s)
    --- PASS: TestCheckDownload/1 (0.41s)
    --- PASS: TestCheckDownload/2 (0.13s)
    --- PASS: TestCheckDownload/3 (0.16s)
    --- PASS: TestCheckDownload/4 (0.25s)
    --- PASS: TestCheckDownload/5 (0.30s)
    --- PASS: TestCheckDownload/6 (0.23s)
    --- PASS: TestCheckDownload/7 (0.30s)
=== RUN   TestCheckSizeOnly
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
=== RUN   TestCheckSizeOnly/1
=== RUN   TestCheckSizeOnly/2
=== RUN   TestCheckSizeOnly/3
2025/01/28 02:21:30 DEBUG : potato2: File has been put by hash from source
=== RUN   TestCheckSizeOnly/4
=== RUN   TestCheckSizeOnly/5
2025/01/28 02:21:31 DEBUG : remotepotato: File has been put by hash from source
=== RUN   TestCheckSizeOnly/6
=== RUN   TestCheckSizeOnly/7
--- PASS: TestCheckSizeOnly (2.73s)
    --- PASS: TestCheckSizeOnly/1 (0.10s)
    --- PASS: TestCheckSizeOnly/2 (0.09s)
    --- PASS: TestCheckSizeOnly/3 (0.11s)
    --- PASS: TestCheckSizeOnly/4 (0.14s)
    --- PASS: TestCheckSizeOnly/5 (0.12s)
    --- PASS: TestCheckSizeOnly/6 (0.09s)
    --- PASS: TestCheckSizeOnly/7 (0.10s)
=== RUN   TestCheckEqualReaders
--- PASS: TestCheckEqualReaders (0.00s)
=== RUN   TestParseSumFile
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
2025/01/28 02:21:32 DEBUG : test.sum: File has been put by hash from source
2025/01/28 02:21:32 DEBUG : [rclone-test-qupolaq2sumi]: Lock file server:   locks 1, url https://cloclo62.datacloudmail.ru/oauth-get/
2025/01/28 02:21:32 DEBUG : [rclone-test-qupolaq2sumi]: Unlock file server: locks 0, url https://cloclo62.datacloudmail.ru/oauth-get/
2025/01/28 02:21:32 NOTICE: test.sum: improperly formatted checksum line 4
2025/01/28 02:21:32 NOTICE: test.sum: improperly formatted checksum line 5
2025/01/28 02:21:32 NOTICE: test.sum: improperly formatted checksum line 6
2025/01/28 02:21:32 NOTICE: test.sum: 2 warning(s) suppressed...
2025/01/28 02:21:32 DEBUG : test.sum: File has been put by hash from source
2025/01/28 02:21:32 DEBUG : [rclone-test-qupolaq2sumi]: Lock file server:   locks 1, url https://cloclo62.datacloudmail.ru/oauth-get/
2025/01/28 02:21:33 DEBUG : [rclone-test-qupolaq2sumi]: Unlock file server: locks 0, url https://cloclo62.datacloudmail.ru/oauth-get/
2025/01/28 02:21:33 NOTICE: test.sum: improperly formatted checksum line 4
2025/01/28 02:21:33 NOTICE: test.sum: improperly formatted checksum line 5
2025/01/28 02:21:33 NOTICE: test.sum: improperly formatted checksum line 6
2025/01/28 02:21:33 NOTICE: test.sum: 2 warning(s) suppressed...
--- PASS: TestParseSumFile (1.10s)
=== RUN   TestCheckSum
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
2025/01/28 02:21:33 DEBUG : Creating backend with remote "TestMailru:rclone-test-qupolaq2sumi/data"
    check_test.go:353: [rclone-test-qupolaq2sumi/data] lacks md5, skipping
--- SKIP: TestCheckSum (0.36s)
=== RUN   TestCheckSumDownload
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
2025/01/28 02:21:33 DEBUG : Creating backend with remote "TestMailru:rclone-test-qupolaq2sumi/data"
2025/01/28 02:21:34 DEBUG : test.sum: File has been put by hash from source
=== RUN   TestCheckSumDownload/subtest1
2025/01/28 02:21:35 DEBUG : test.sum: File has been put by hash from source
=== RUN   TestCheckSumDownload/subtest2
2025/01/28 02:21:35 DEBUG : test.sum: File has been put by hash from source
=== RUN   TestCheckSumDownload/subtest3
2025/01/28 02:21:36 DEBUG : test.sum: File has been put by hash from source
=== RUN   TestCheckSumDownload/subtest4
2025/01/28 02:21:37 DEBUG : test.sum: File has been put by hash from source
=== RUN   TestCheckSumDownload/subtest5
2025/01/28 02:21:38 DEBUG : test.sum: File has been put by hash from source
=== RUN   TestCheckSumDownload/subtest6
2025/01/28 02:21:39 DEBUG : test.sum: File has been put by hash from source
=== RUN   TestCheckSumDownload/subtest7
--- PASS: TestCheckSumDownload (7.63s)
    --- PASS: TestCheckSumDownload/subtest1 (0.60s)
    --- PASS: TestCheckSumDownload/subtest2 (0.27s)
    --- PASS: TestCheckSumDownload/subtest3 (0.43s)
    --- PASS: TestCheckSumDownload/subtest4 (0.42s)
    --- PASS: TestCheckSumDownload/subtest5 (0.43s)
    --- PASS: TestCheckSumDownload/subtest6 (0.51s)
    --- PASS: TestCheckSumDownload/subtest7 (0.42s)
=== RUN   TestApplyTransforms
2025/01/28 02:21:41 DEBUG : Creating backend with remote "TestMailru:rclone-test-wizixuq2pale"
2025/01/28 02:21:41 DEBUG : Using config file from "/home/rclone/.rclone.conf"
2025/01/28 02:21:41 DEBUG : Creating backend with remote "/tmp/rclone1197643969"
    run.go:180: Remote "[rclone-test-wizixuq2pale]", Local "Local file system at /tmp/rclone1197643969", Modify Window "1s"
2025/01/28 02:21:41 DEBUG : [rclone-test-wizixuq2pale]: new meta server: https://cld-extapi.datacloudmail.ru/meta/
upper checkfile vs. lower remote (without normalization)
2025/01/28 02:21:42 ERROR : hello, world!: sum not found
2025/01/28 02:21:42 ERROR : HELLO, WORLD!: file not in [rclone-test-wizixuq2pale]
2025/01/28 02:21:42 NOTICE: [rclone-test-wizixuq2pale]: 1 files missing
2025/01/28 02:21:42 NOTICE: 1 hashes missing
2025/01/28 02:21:42 NOTICE: [rclone-test-wizixuq2pale]: 2 differences found
2025/01/28 02:21:42 NOTICE: [rclone-test-wizixuq2pale]: 2 errors while checking
upper checkfile vs. lower remote (with normalization)
2025/01/28 02:21:42 DEBUG : [rclone-test-wizixuq2pale]: Switch file server: locks 1, url https://cloclo61.datacloudmail.ru/oauth-get/, expiry "2025-01-28T02:24:42.241812178Z"
2025/01/28 02:21:42 DEBUG : [rclone-test-wizixuq2pale]: Unlock file server: locks 0, url https://cloclo61.datacloudmail.ru/oauth-get/
2025/01/28 02:21:42 DEBUG : hello, world!: md5 = 65a8e27d8879283831b664bd8b7f0ad4 OK
2025/01/28 02:21:42 NOTICE: [rclone-test-wizixuq2pale]: 0 differences found
2025/01/28 02:21:42 NOTICE: [rclone-test-wizixuq2pale]: 1 matching files
2025/01/28 02:21:42 DEBUG : Creating backend with remote "TestMailru:rclone-test-rixinoh8dehi"
2025/01/28 02:21:42 DEBUG : Using config file from "/home/rclone/.rclone.conf"
2025/01/28 02:21:42 DEBUG : Creating backend with remote "/tmp/rclone1117309855"
    run.go:180: Remote "[rclone-test-rixinoh8dehi]", Local "Local file system at /tmp/rclone1117309855", Modify Window "1s"
2025/01/28 02:21:42 DEBUG : [rclone-test-rixinoh8dehi]: new meta server: https://cld-extapi.datacloudmail.ru/meta/
lower checkfile vs. upper remote (without normalization)
2025/01/28 02:21:43 ERROR : HELLO, WORLD!: sum not found
2025/01/28 02:21:43 ERROR : hello, world!: file not in [rclone-test-rixinoh8dehi]
2025/01/28 02:21:43 NOTICE: [rclone-test-rixinoh8dehi]: 1 files missing
2025/01/28 02:21:43 NOTICE: 1 hashes missing
2025/01/28 02:21:43 NOTICE: [rclone-test-rixinoh8dehi]: 2 differences found
2025/01/28 02:21:43 NOTICE: [rclone-test-rixinoh8dehi]: 2 errors while checking
lower checkfile vs. upper remote (with normalization)
2025/01/28 02:21:43 DEBUG : [rclone-test-rixinoh8dehi]: Switch file server: locks 1, url https://cloclo62.datacloudmail.ru/oauth-get/, expiry "2025-01-28T02:24:43.3577189Z"
2025/01/28 02:21:43 DEBUG : [rclone-test-rixinoh8dehi]: Unlock file server: locks 0, url https://cloclo62.datacloudmail.ru/oauth-get/
2025/01/28 02:21:43 DEBUG : HELLO, WORLD!: md5 = 65a8e27d8879283831b664bd8b7f0ad4 OK
2025/01/28 02:21:43 NOTICE: [rclone-test-rixinoh8dehi]: 0 differences found
2025/01/28 02:21:43 NOTICE: [rclone-test-rixinoh8dehi]: 1 matching files
2025/01/28 02:21:43 DEBUG : Creating backend with remote "TestMailru:rclone-test-faxewuk0buba"
2025/01/28 02:21:43 DEBUG : Using config file from "/home/rclone/.rclone.conf"
2025/01/28 02:21:43 DEBUG : Creating backend with remote "/tmp/rclone3318512171"
    run.go:180: Remote "[rclone-test-faxewuk0buba]", Local "Local file system at /tmp/rclone3318512171", Modify Window "1s"
2025/01/28 02:21:43 DEBUG : [rclone-test-faxewuk0buba]: new meta server: https://cld-extapi.datacloudmail.ru/meta/
lower checkfile vs. upperlowermixed remote (without normalization)
2025/01/28 02:21:44 ERROR : HeLlO, wOrLd!: sum not found
2025/01/28 02:21:44 ERROR : hello, world!: file not in [rclone-test-faxewuk0buba]
2025/01/28 02:21:44 NOTICE: [rclone-test-faxewuk0buba]: 1 files missing
2025/01/28 02:21:44 NOTICE: 1 hashes missing
2025/01/28 02:21:44 NOTICE: [rclone-test-faxewuk0buba]: 2 differences found
2025/01/28 02:21:44 NOTICE: [rclone-test-faxewuk0buba]: 2 errors while checking
lower checkfile vs. upperlowermixed remote (with normalization)
2025/01/28 02:21:44 DEBUG : [rclone-test-faxewuk0buba]: Switch file server: locks 1, url https://cloclo53.datacloudmail.ru/oauth-get/, expiry "2025-01-28T02:24:44.429870202Z"
2025/01/28 02:21:44 DEBUG : [rclone-test-faxewuk0buba]: Unlock file server: locks 0, url https://cloclo53.datacloudmail.ru/oauth-get/
2025/01/28 02:21:44 DEBUG : HeLlO, wOrLd!: md5 = 65a8e27d8879283831b664bd8b7f0ad4 OK
2025/01/28 02:21:44 NOTICE: [rclone-test-faxewuk0buba]: 0 differences found
2025/01/28 02:21:44 NOTICE: [rclone-test-faxewuk0buba]: 1 matching files
2025/01/28 02:21:44 DEBUG : Creating backend with remote "TestMailru:rclone-test-foxomig6mure"
2025/01/28 02:21:44 DEBUG : Using config file from "/home/rclone/.rclone.conf"
2025/01/28 02:21:44 DEBUG : Creating backend with remote "/tmp/rclone3684480877"
    run.go:180: Remote "[rclone-test-foxomig6mure]", Local "Local file system at /tmp/rclone3684480877", Modify Window "1s"
2025/01/28 02:21:44 DEBUG : [rclone-test-foxomig6mure]: new meta server: https://cld-extapi.datacloudmail.ru/meta/
upperlowermixed checkfile vs. upper remote (without normalization)
2025/01/28 02:21:45 ERROR : HELLO, WORLD!: sum not found
2025/01/28 02:21:45 ERROR : HeLlO, wOrLd!: file not in [rclone-test-foxomig6mure]
2025/01/28 02:21:45 NOTICE: [rclone-test-foxomig6mure]: 1 files missing
2025/01/28 02:21:45 NOTICE: 1 hashes missing
2025/01/28 02:21:45 NOTICE: [rclone-test-foxomig6mure]: 2 differences found
2025/01/28 02:21:45 NOTICE: [rclone-test-foxomig6mure]: 2 errors while checking
upperlowermixed checkfile vs. upper remote (with normalization)
2025/01/28 02:21:45 DEBUG : [rclone-test-foxomig6mure]: Switch file server: locks 1, url https://cloclo63.datacloudmail.ru/oauth-get/, expiry "2025-01-28T02:24:45.531713656Z"
2025/01/28 02:21:45 DEBUG : [rclone-test-foxomig6mure]: Unlock file server: locks 0, url https://cloclo63.datacloudmail.ru/oauth-get/
2025/01/28 02:21:45 DEBUG : HELLO, WORLD!: md5 = 65a8e27d8879283831b664bd8b7f0ad4 OK
2025/01/28 02:21:45 NOTICE: [rclone-test-foxomig6mure]: 0 differences found
2025/01/28 02:21:45 NOTICE: [rclone-test-foxomig6mure]: 1 matching files
2025/01/28 02:21:45 DEBUG : Creating backend with remote "TestMailru:rclone-test-biwejit5foga"
2025/01/28 02:21:45 DEBUG : Using config file from "/home/rclone/.rclone.conf"
2025/01/28 02:21:45 DEBUG : Creating backend with remote "/tmp/rclone3721040116"
    run.go:180: Remote "[rclone-test-biwejit5foga]", Local "Local file system at /tmp/rclone3721040116", Modify Window "1s"
2025/01/28 02:21:45 DEBUG : [rclone-test-biwejit5foga]: new meta server: https://cld-extapi.datacloudmail.ru/meta/
NFD checkfile vs. NFC remote (without normalization)
2025/01/28 02:21:46 ERROR : 測試_Русский___ě_áñ: sum not found
2025/01/28 02:21:46 ERROR : 測試_Русский___ě_áñ: file not in [rclone-test-biwejit5foga]
2025/01/28 02:21:46 NOTICE: [rclone-test-biwejit5foga]: 1 files missing
2025/01/28 02:21:46 NOTICE: 1 hashes missing
2025/01/28 02:21:46 NOTICE: [rclone-test-biwejit5foga]: 2 differences found
2025/01/28 02:21:46 NOTICE: [rclone-test-biwejit5foga]: 2 errors while checking
NFD checkfile vs. NFC remote (with normalization)
2025/01/28 02:21:46 DEBUG : [rclone-test-biwejit5foga]: Switch file server: locks 1, url https://cloclo54.datacloudmail.ru/oauth-get/, expiry "2025-01-28T02:24:46.686868449Z"
2025/01/28 02:21:46 DEBUG : [rclone-test-biwejit5foga]: Unlock file server: locks 0, url https://cloclo54.datacloudmail.ru/oauth-get/
2025/01/28 02:21:46 DEBUG : 測試_Русский___ě_áñ: md5 = 65a8e27d8879283831b664bd8b7f0ad4 OK
2025/01/28 02:21:46 NOTICE: [rclone-test-biwejit5foga]: 0 differences found
2025/01/28 02:21:46 NOTICE: [rclone-test-biwejit5foga]: 1 matching files
2025/01/28 02:21:46 DEBUG : Creating backend with remote "TestMailru:rclone-test-picuhag8suha"
2025/01/28 02:21:46 DEBUG : Using config file from "/home/rclone/.rclone.conf"
2025/01/28 02:21:47 DEBUG : Creating backend with remote "/tmp/rclone515236651"
    run.go:180: Remote "[rclone-test-picuhag8suha]", Local "Local file system at /tmp/rclone515236651", Modify Window "1s"
2025/01/28 02:21:47 DEBUG : [rclone-test-picuhag8suha]: new meta server: https://cld-extapi.datacloudmail.ru/meta/
    run.go:285: Failed to put "測試_Русский___ě_áñ" to "[rclone-test-picuhag8suha]": invalid characters in object name
2025/01/28 02:21:47 DEBUG : [rclone-test-picuhag8suha]: Purge remote
2025/01/28 02:21:47 DEBUG : [rclone-test-biwejit5foga]: Purge remote
2025/01/28 02:21:47 DEBUG : [rclone-test-foxomig6mure]: Purge remote
2025/01/28 02:21:48 DEBUG : [rclone-test-faxewuk0buba]: Purge remote
2025/01/28 02:21:48 DEBUG : [rclone-test-rixinoh8dehi]: Purge remote
2025/01/28 02:21:48 DEBUG : [rclone-test-wizixuq2pale]: Purge remote
--- FAIL: TestApplyTransforms (7.30s)
=== RUN   TestTruncateString
--- PASS: TestTruncateString (0.00s)
=== RUN   TestCopyFile
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
2025/01/28 02:21:48 DEBUG : file1: Need to transfer - File not found at Destination
2025/01/28 02:21:48 DEBUG : file1: mailru = 66696c653120636f6e74656e7473000000000000 OK
2025/01/28 02:21:48 INFO  : file1: Copied (new) to: sub/file2
2025/01/28 02:21:49 DEBUG : file1: Size and modification time the same (differ by -499.999999ms, within tolerance 1s)
2025/01/28 02:21:49 DEBUG : file1: Unchanged skipping
2025/01/28 02:21:49 DEBUG : [rclone-test-qupolaq2sumi]: don't need to copy/move sub/file2, it is already at target location
--- PASS: TestCopyFile (2.81s)
=== RUN   TestCopyLongFile
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
    copy_test.go:153: Test only runs on local
--- SKIP: TestCopyLongFile (0.21s)
=== RUN   TestCopyFileBackupDir
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
2025/01/28 02:21:52 DEBUG : Creating backend with remote "TestMailru:rclone-test-qupolaq2sumi/backup"
2025/01/28 02:21:52 DEBUG : dst/file1: Sizes differ (src 14 vs dst 18)
2025/01/28 02:21:52 DEBUG : [rclone-test-qupolaq2sumi/backup]: new meta server: https://cld-extapi.datacloudmail.ru/meta/
2025/01/28 02:21:52 DEBUG : [rclone-test-qupolaq2sumi/backup]: mkDirs by part "/rclone-test-qupolaq2sumi/backup/dst"
2025/01/28 02:21:53 INFO  : dst/file1: Moved (server-side)
2025/01/28 02:21:53 DEBUG : dst/file1: mailru = 66696c653120636f6e74656e7473000000000000 OK
2025/01/28 02:21:53 INFO  : dst/file1: Copied (new)
--- PASS: TestCopyFileBackupDir (4.05s)
=== RUN   TestCopyFileCompareDest
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
2025/01/28 02:21:55 DEBUG : Creating backend with remote "TestMailru:rclone-test-qupolaq2sumi/dst"
2025/01/28 02:21:55 DEBUG : Creating backend with remote "TestMailru:rclone-test-qupolaq2sumi/CompareDest"
2025/01/28 02:21:55 DEBUG : one: Need to transfer - File not found at Destination
2025/01/28 02:21:56 DEBUG : [rclone-test-qupolaq2sumi/dst]: new meta server: https://cld-extapi.datacloudmail.ru/meta/
2025/01/28 02:21:56 DEBUG : one: mailru = 6f6e650000000000000000000000000000000000 OK
2025/01/28 02:21:56 INFO  : one: Copied (new)
2025/01/28 02:21:56 DEBUG : one: Sizes differ (src 5 vs dst 3)
2025/01/28 02:21:57 DEBUG : one: mailru = 6f6e657432000000000000000000000000000000 OK
2025/01/28 02:21:57 INFO  : one: Copied (replaced existing)
2025/01/28 02:21:58 DEBUG : one: Sizes differ (src 5 vs dst 3)
2025/01/28 02:21:58 DEBUG : one: Size and modification time the same (differ by -123.456789ms, within tolerance 1s)
2025/01/28 02:21:58 DEBUG : one: Destination found in --compare-dest, skipping
2025/01/28 02:21:59 DEBUG : two: Need to transfer - File not found at Destination
2025/01/28 02:21:59 DEBUG : two: Size and modification time the same (differ by -123.456789ms, within tolerance 1s)
2025/01/28 02:21:59 DEBUG : two: Destination found in --compare-dest, skipping
2025/01/28 02:21:59 DEBUG : two: Need to transfer - File not found at Destination
2025/01/28 02:21:59 DEBUG : two: Size and modification time the same (differ by -123.456789ms, within tolerance 1s)
2025/01/28 02:21:59 DEBUG : two: Destination found in --compare-dest, skipping
2025/01/28 02:22:00 DEBUG : two: Need to transfer - File not found at Destination
2025/01/28 02:22:00 DEBUG : two: Sizes differ (src 5 vs dst 3)
2025/01/28 02:22:00 DEBUG : two: mailru = 74776f7433000000000000000000000000000000 OK
2025/01/28 02:22:00 INFO  : two: Copied (new)
--- PASS: TestCopyFileCompareDest (6.68s)
=== RUN   TestCopyFileCopyDest
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
2025/01/28 02:22:02 DEBUG : Creating backend with remote "TestMailru:rclone-test-qupolaq2sumi/dst"
2025/01/28 02:22:02 DEBUG : Creating backend with remote "TestMailru:rclone-test-qupolaq2sumi/CopyDest"
2025/01/28 02:22:02 DEBUG : one: Need to transfer - File not found at Destination
2025/01/28 02:22:02 DEBUG : [rclone-test-qupolaq2sumi/dst]: new meta server: https://cld-extapi.datacloudmail.ru/meta/
2025/01/28 02:22:03 DEBUG : one: mailru = 6f6e650000000000000000000000000000000000 OK
2025/01/28 02:22:03 INFO  : one: Copied (new)
2025/01/28 02:22:03 DEBUG : one: Sizes differ (src 5 vs dst 3)
2025/01/28 02:22:04 DEBUG : one: mailru = 6f6e657432000000000000000000000000000000 OK
2025/01/28 02:22:04 INFO  : one: Copied (replaced existing)
2025/01/28 02:22:05 DEBUG : Creating backend with remote "TestMailru:rclone-test-qupolaq2sumi/BackupDir"
2025/01/28 02:22:05 DEBUG : one: Sizes differ (src 5 vs dst 3)
2025/01/28 02:22:05 DEBUG : one: Size and modification time the same (differ by -123.456789ms, within tolerance 1s)
2025/01/28 02:22:05 DEBUG : one: Sizes differ (src 5 vs dst 3)
2025/01/28 02:22:05 DEBUG : [rclone-test-qupolaq2sumi/BackupDir]: new meta server: https://cld-extapi.datacloudmail.ru/meta/
2025/01/28 02:22:05 INFO  : one: Moved (server-side)
2025/01/28 02:22:06 DEBUG : one: mailru = 6f6e657432000000000000000000000000000000 OK
2025/01/28 02:22:06 INFO  : one: Copied (server-side copy)
2025/01/28 02:22:06 DEBUG : one: Destination found in --copy-dest, using server-side copy
2025/01/28 02:22:07 DEBUG : two: Need to transfer - File not found at Destination
2025/01/28 02:22:07 DEBUG : two: Size and modification time the same (differ by -123.456789ms, within tolerance 1s)
2025/01/28 02:22:07 DEBUG : two: mailru = 74776f0000000000000000000000000000000000 OK
2025/01/28 02:22:07 INFO  : two: Copied (server-side copy)
2025/01/28 02:22:07 DEBUG : two: Destination found in --copy-dest, using server-side copy
2025/01/28 02:22:08 DEBUG : two: Size and modification time the same (differ by -123.456789ms, within tolerance 1s)
2025/01/28 02:22:08 DEBUG : two: Unchanged skipping
2025/01/28 02:22:09 DEBUG : three: Need to transfer - File not found at Destination
2025/01/28 02:22:09 DEBUG : three: Sizes differ (src 7 vs dst 5)
2025/01/28 02:22:09 DEBUG : three: Destination not found in --copy-dest
2025/01/28 02:22:09 DEBUG : three: mailru = 7468726565743300000000000000000000000000 OK
2025/01/28 02:22:09 INFO  : three: Copied (new)
--- PASS: TestCopyFileCopyDest (9.83s)
=== RUN   TestCopyInplace
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
    copy_test.go:370: Partial uploads not supported
--- SKIP: TestCopyInplace (0.18s)
=== RUN   TestCopyLongFileName
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
    copy_test.go:403: Partial uploads not supported
--- SKIP: TestCopyLongFileName (0.21s)
=== RUN   TestCopyFileMaxTransfer
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
2025/01/28 02:22:12 DEBUG : TestCopyFileMaxTransfer/file1: Need to transfer - File not found at Destination
2025/01/28 02:22:12 DEBUG : TestCopyFileMaxTransfer/file1: mailru = 66696c653120636f6e74656e7473000000000000 OK
2025/01/28 02:22:12 INFO  : TestCopyFileMaxTransfer/file1: Copied (new)
2025/01/28 02:22:13 DEBUG : TestCopyFileMaxTransfer/file2: Need to transfer - File not found at Destination
2025/01/28 02:22:13 DEBUG : [rclone-test-qupolaq2sumi]: new upload shard: https://uploader.cloud.mail.ru/upload/
2025/01/28 02:22:13 ERROR : TestCopyFileMaxTransfer/file2: Failed to copy: Put "https://uploader.cloud.mail.ru/upload/?client_id=cloud-win&token=2edf866cb6157274b2c57cedd49e32898b6c82ba37363830": max transfer limit reached as set by --max-transfer
2025/01/28 02:22:14 DEBUG : TestCopyFileMaxTransfer/file3: Need to transfer - File not found at Destination
2025/01/28 02:22:14 DEBUG : TestCopyFileMaxTransfer/file4: Need to transfer - File not found at Destination
2025/01/28 02:22:14 DEBUG : TestCopyFileMaxTransfer/file4: mailru = 67ea9c6dabb081bef69fed1805c3e08ea9163c58 OK
2025/01/28 02:22:14 INFO  : TestCopyFileMaxTransfer/file4: Copied (new)
--- PASS: TestCopyFileMaxTransfer (3.31s)
=== RUN   TestDeduplicateInteractive
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
    dedupe_test.go:24: Can't test deduplicate - no duplicate files possible
--- SKIP: TestDeduplicateInteractive (0.20s)
=== RUN   TestDeduplicateSkip
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
    dedupe_test.go:24: Can't test deduplicate - no duplicate files possible
--- SKIP: TestDeduplicateSkip (0.19s)
=== RUN   TestDeduplicateSizeOnly
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
    dedupe_test.go:24: Can't test deduplicate - no duplicate files possible
--- SKIP: TestDeduplicateSizeOnly (0.20s)
=== RUN   TestDeduplicateFirst
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
    dedupe_test.go:24: Can't test deduplicate - no duplicate files possible
--- SKIP: TestDeduplicateFirst (0.22s)
=== RUN   TestDeduplicateNewest
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
    dedupe_test.go:24: Can't test deduplicate - no duplicate files possible
--- SKIP: TestDeduplicateNewest (0.23s)
=== RUN   TestDeduplicateNewestByHash
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
2025/01/28 02:22:17 DEBUG : one: Cannot put by hash from source, performing upload
2025/01/28 02:22:17 DEBUG : also/one: File has been put by hash from source
2025/01/28 02:22:17 DEBUG : another: File has been put by hash from source
2025/01/28 02:22:18 INFO  : [rclone-test-qupolaq2sumi]: Looking for duplicate mailru hashes using newest mode.
2025/01/28 02:22:18 NOTICE: d81b36c0977d156234788c7342a9c08c50084465: Found 3 files with duplicate mailru hashes
2025/01/28 02:22:18 INFO  : one: Deleted
2025/01/28 02:22:18 INFO  : also/one: Deleted
2025/01/28 02:22:18 NOTICE: d81b36c0977d156234788c7342a9c08c50084465: Deleted 2 extra copies
--- PASS: TestDeduplicateNewestByHash (2.52s)
=== RUN   TestDeduplicateOldest
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
    dedupe_test.go:24: Can't test deduplicate - no duplicate files possible
--- SKIP: TestDeduplicateOldest (0.21s)
=== RUN   TestDeduplicateLargest
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
    dedupe_test.go:24: Can't test deduplicate - no duplicate files possible
--- SKIP: TestDeduplicateLargest (0.20s)
=== RUN   TestDeduplicateSmallest
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
    dedupe_test.go:24: Can't test deduplicate - no duplicate files possible
--- SKIP: TestDeduplicateSmallest (0.21s)
=== RUN   TestDeduplicateRename
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
    dedupe_test.go:24: Can't test deduplicate - no duplicate files possible
--- SKIP: TestDeduplicateRename (0.23s)
=== RUN   TestMergeDirs
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
    dedupe_test.go:256: Can't merge directories
--- SKIP: TestMergeDirs (0.45s)
=== RUN   TestListDirSorted
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
2025/01/28 02:22:22 DEBUG : a.txt: Excluded (Size Filter)
2025/01/28 02:22:22 DEBUG : a.txt: Excluded
2025/01/28 02:22:22 DEBUG : sub dir/hello world: Excluded (Size Filter)
2025/01/28 02:22:22 DEBUG : sub dir/hello world: Excluded
2025/01/28 02:22:22 DEBUG : sub dir/hello world2: Excluded (Size Filter)
2025/01/28 02:22:22 DEBUG : sub dir/hello world2: Excluded
2025/01/28 02:22:23 DEBUG : sub dir/ignore dir: Excluded
2025/01/28 02:22:23 DEBUG : sub dir/hello world: Excluded (Size Filter)
2025/01/28 02:22:23 DEBUG : sub dir/hello world: Excluded
2025/01/28 02:22:23 DEBUG : sub dir/hello world2: Excluded (Size Filter)
2025/01/28 02:22:23 DEBUG : sub dir/hello world2: Excluded
2025/01/28 02:22:23 DEBUG : sub dir/ignore dir: Excluded
--- PASS: TestListDirSorted (4.66s)
=== RUN   TestListJSON
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
=== RUN   TestListJSON/Default
=== RUN   TestListJSON/FilesOnly
=== RUN   TestListJSON/DirsOnly
=== RUN   TestListJSON/Recurse
=== RUN   TestListJSON/SubDir
=== RUN   TestListJSON/NoModTime
=== RUN   TestListJSON/NoMimeType
=== RUN   TestListJSON/ShowHash
=== RUN   TestListJSON/HashTypes
2025/01/28 02:22:27 ERROR : file1: Failed to read hash: hash type not supported
=== RUN   TestListJSON/Metadata
--- PASS: TestListJSON (2.53s)
    --- PASS: TestListJSON/Default (0.10s)
    --- PASS: TestListJSON/FilesOnly (0.10s)
    --- PASS: TestListJSON/DirsOnly (0.11s)
    --- PASS: TestListJSON/Recurse (0.27s)
    --- PASS: TestListJSON/SubDir (0.10s)
    --- PASS: TestListJSON/NoModTime (0.08s)
    --- PASS: TestListJSON/NoMimeType (0.11s)
    --- PASS: TestListJSON/ShowHash (0.15s)
    --- PASS: TestListJSON/HashTypes (0.11s)
    --- PASS: TestListJSON/Metadata (0.08s)
=== RUN   TestStatJSON
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
=== RUN   TestStatJSON/Root
=== RUN   TestStatJSON/RootFilesOnly
=== RUN   TestStatJSON/RootDirsOnly
=== RUN   TestStatJSON/Dir
=== RUN   TestStatJSON/DirWithTrailingSlash
=== RUN   TestStatJSON/File
=== RUN   TestStatJSON/NotFound
=== RUN   TestStatJSON/DirFilesOnly
=== RUN   TestStatJSON/FileFilesOnly
=== RUN   TestStatJSON/NotFoundFilesOnly
=== RUN   TestStatJSON/DirDirsOnly
=== RUN   TestStatJSON/FileDirsOnly
=== RUN   TestStatJSON/NotFoundDirsOnly
=== RUN   TestStatJSON/RootNotFound
2025/01/28 02:22:30 DEBUG : Creating backend with remote "TestMailru:rclone-test-qupolaq2sumi/notfound"
--- PASS: TestStatJSON (3.00s)
    --- PASS: TestStatJSON/Root (0.14s)
    --- PASS: TestStatJSON/RootFilesOnly (0.00s)
    --- PASS: TestStatJSON/RootDirsOnly (0.09s)
    --- PASS: TestStatJSON/Dir (0.24s)
    --- PASS: TestStatJSON/DirWithTrailingSlash (0.08s)
    --- PASS: TestStatJSON/File (0.10s)
    --- PASS: TestStatJSON/NotFound (0.22s)
    --- PASS: TestStatJSON/DirFilesOnly (0.09s)
    --- PASS: TestStatJSON/FileFilesOnly (0.10s)
    --- PASS: TestStatJSON/NotFoundFilesOnly (0.09s)
    --- PASS: TestStatJSON/DirDirsOnly (0.10s)
    --- PASS: TestStatJSON/FileDirsOnly (0.11s)
    --- PASS: TestStatJSON/NotFoundDirsOnly (0.14s)
    --- PASS: TestStatJSON/RootNotFound (0.23s)
=== RUN   TestMkdir
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
2025/01/28 02:22:30 INFO  : [rclone-test-qupolaq2sumi]: Making directory
2025/01/28 02:22:31 INFO  : [rclone-test-qupolaq2sumi]: Making directory
--- PASS: TestMkdir (0.52s)
=== RUN   TestLsd
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
--- PASS: TestLsd (1.13s)
=== RUN   TestLs
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
2025/01/28 02:22:32 DEBUG : potato2: File has been put by hash from source
--- PASS: TestLs (1.02s)
=== RUN   TestLsWithFilesFrom
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
2025/01/28 02:22:33 DEBUG : potato2: File has been put by hash from source
2025/01/28 02:22:34 DEBUG : empty space: Excluded (FilesFrom Filter)
2025/01/28 02:22:34 DEBUG : empty space: Excluded
--- PASS: TestLsWithFilesFrom (1.28s)
=== RUN   TestLsLong
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
2025/01/28 02:22:35 DEBUG : potato2: File has been put by hash from source
--- PASS: TestLsLong (0.99s)
=== RUN   TestHashSums
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
2025/01/28 02:22:36 DEBUG : potato2: File has been put by hash from source
--- PASS: TestHashSums (0.97s)
=== RUN   TestHashSumsWithErrors
2025/01/28 02:22:36 DEBUG : Creating backend with remote ":memory:"
2025/01/28 02:22:36 ERROR : file1: hash unsupported: hash type not supported
--- PASS: TestHashSumsWithErrors (0.00s)
=== RUN   TestHashStream
2025/01/28 02:22:36 DEBUG : Creating md5 hash of 0 bytes read from input stream
2025/01/28 02:22:36 DEBUG : Creating md5 hash of 0 bytes read from input stream
2025/01/28 02:22:36 DEBUG : Creating sha1 hash of 0 bytes read from input stream
2025/01/28 02:22:36 DEBUG : Creating sha1 hash of 0 bytes read from input stream
2025/01/28 02:22:36 DEBUG : Creating md5 hash of 12 bytes read from input stream
2025/01/28 02:22:36 DEBUG : Creating md5 hash of 12 bytes read from input stream
2025/01/28 02:22:36 DEBUG : Creating sha1 hash of 12 bytes read from input stream
2025/01/28 02:22:36 DEBUG : Creating sha1 hash of 12 bytes read from input stream
--- PASS: TestHashStream (0.00s)
=== RUN   TestSuffixName
--- PASS: TestSuffixName (0.00s)
=== RUN   TestCount
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
2025/01/28 02:22:36 DEBUG : potato2: File has been put by hash from source
--- PASS: TestCount (1.76s)
=== RUN   TestDelete
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
2025/01/28 02:22:38 DEBUG : medium: File has been put by hash from source
2025/01/28 02:22:39 DEBUG : large: File has been put by hash from source
2025/01/28 02:22:39 DEBUG : Waiting for deletions to finish
2025/01/28 02:22:39 DEBUG : large: Excluded (Size Filter)
2025/01/28 02:22:39 DEBUG : large: Excluded
2025/01/28 02:22:39 INFO  : medium: Deleted
2025/01/28 02:22:39 INFO  : small: Deleted
--- PASS: TestDelete (1.48s)
=== RUN   TestMaxDelete
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
2025/01/28 02:22:40 DEBUG : medium: File has been put by hash from source
2025/01/28 02:22:40 DEBUG : large: File has been put by hash from source
2025/01/28 02:22:40 DEBUG : Waiting for deletions to finish
2025/01/28 02:22:40 ERROR : small: Got fatal error on delete: --max-delete threshold reached
2025/01/28 02:22:41 INFO  : large: Deleted
2025/01/28 02:22:41 INFO  : medium: Deleted
--- PASS: TestMaxDelete (1.64s)
=== RUN   TestMaxDeleteSizeLargeFile
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
2025/01/28 02:22:42 DEBUG : medium: File has been put by hash from source
2025/01/28 02:22:42 DEBUG : large: File has been put by hash from source
2025/01/28 02:22:42 DEBUG : Waiting for deletions to finish
2025/01/28 02:22:42 ERROR : large: Got fatal error on delete: --max-delete-size threshold reached
2025/01/28 02:22:42 INFO  : medium: Deleted
2025/01/28 02:22:42 INFO  : small: Deleted
--- PASS: TestMaxDeleteSizeLargeFile (1.65s)
=== RUN   TestMaxDeleteSize
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
2025/01/28 02:22:43 DEBUG : medium: File has been put by hash from source
2025/01/28 02:22:43 DEBUG : large: File has been put by hash from source
2025/01/28 02:22:44 DEBUG : Waiting for deletions to finish
2025/01/28 02:22:44 ERROR : small: Got fatal error on delete: --max-delete-size threshold reached
2025/01/28 02:22:44 INFO  : medium: Deleted
2025/01/28 02:22:44 INFO  : large: Deleted
--- PASS: TestMaxDeleteSize (1.66s)
=== RUN   TestReadFile
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
2025/01/28 02:22:45 DEBUG : ReadFile: File has been put by hash from source
2025/01/28 02:22:45 DEBUG : [rclone-test-qupolaq2sumi]: Lock file server:   locks 1, url https://cloclo62.datacloudmail.ru/oauth-get/
2025/01/28 02:22:45 DEBUG : [rclone-test-qupolaq2sumi]: Unlock file server: locks 0, url https://cloclo62.datacloudmail.ru/oauth-get/
--- PASS: TestReadFile (1.10s)
=== RUN   TestRetry
2025/01/28 02:22:46 DEBUG : Received error: Wrapped EOF is retriable: EOF - low level retry 1/5
2025/01/28 02:22:46 DEBUG : Received error: Wrapped EOF is retriable: EOF - low level retry 2/5
2025/01/28 02:22:46 DEBUG : Sleeping for 10ms (as indicated by the server) to obey Retry-After error: BANG
2025/01/28 02:22:46 DEBUG : Sleeping for 10ms (as indicated by the server) to obey Retry-After error: BANG
2025/01/28 02:22:46 DEBUG : Sleeping for 10ms (as indicated by the server) to obey Retry-After error: BANG
2025/01/28 02:22:46 DEBUG : Sleeping for 10ms (as indicated by the server) to obey Retry-After error: BANG
2025/01/28 02:22:46 DEBUG : Sleeping for 10ms (as indicated by the server) to obey Retry-After error: BANG
--- PASS: TestRetry (0.05s)
=== RUN   TestCat
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
2025/01/28 02:22:46 DEBUG : [rclone-test-qupolaq2sumi]: Lock file server:   locks 1, url https://cloclo62.datacloudmail.ru/oauth-get/
2025/01/28 02:22:46 DEBUG : [rclone-test-qupolaq2sumi]: Unlock file server: locks 0, url https://cloclo62.datacloudmail.ru/oauth-get/
2025/01/28 02:22:46 DEBUG : [rclone-test-qupolaq2sumi]: Lock file server:   locks 1, url https://cloclo62.datacloudmail.ru/oauth-get/
2025/01/28 02:22:46 DEBUG : [rclone-test-qupolaq2sumi]: Unlock file server: locks 0, url https://cloclo62.datacloudmail.ru/oauth-get/
2025/01/28 02:22:47 DEBUG : [rclone-test-qupolaq2sumi]: Lock file server:   locks 1, url https://cloclo62.datacloudmail.ru/oauth-get/
2025/01/28 02:22:47 DEBUG : file1: Server returned full content instead of range
2025/01/28 02:22:47 DEBUG : [rclone-test-qupolaq2sumi]: Unlock file server: locks 0, url https://cloclo62.datacloudmail.ru/oauth-get/
2025/01/28 02:22:47 DEBUG : [rclone-test-qupolaq2sumi]: Lock file server:   locks 1, url https://cloclo62.datacloudmail.ru/oauth-get/
2025/01/28 02:22:47 DEBUG : file2: Server returned full content instead of range
2025/01/28 02:22:47 DEBUG : [rclone-test-qupolaq2sumi]: Unlock file server: locks 0, url https://cloclo62.datacloudmail.ru/oauth-get/
2025/01/28 02:22:47 DEBUG : [rclone-test-qupolaq2sumi]: Lock file server:   locks 1, url https://cloclo62.datacloudmail.ru/oauth-get/
2025/01/28 02:22:47 DEBUG : file1: Server returned full content instead of range
2025/01/28 02:22:47 DEBUG : [rclone-test-qupolaq2sumi]: Unlock file server: locks 0, url https://cloclo62.datacloudmail.ru/oauth-get/
2025/01/28 02:22:47 DEBUG : [rclone-test-qupolaq2sumi]: Lock file server:   locks 1, url https://cloclo62.datacloudmail.ru/oauth-get/
2025/01/28 02:22:47 DEBUG : file2: Server returned full content instead of range
2025/01/28 02:22:47 DEBUG : [rclone-test-qupolaq2sumi]: Unlock file server: locks 0, url https://cloclo62.datacloudmail.ru/oauth-get/
2025/01/28 02:22:47 DEBUG : [rclone-test-qupolaq2sumi]: Lock file server:   locks 1, url https://cloclo62.datacloudmail.ru/oauth-get/
2025/01/28 02:22:47 DEBUG : file1: Server returned full content instead of range
2025/01/28 02:22:47 DEBUG : [rclone-test-qupolaq2sumi]: Unlock file server: locks 0, url https://cloclo62.datacloudmail.ru/oauth-get/
2025/01/28 02:22:47 DEBUG : [rclone-test-qupolaq2sumi]: Lock file server:   locks 1, url https://cloclo62.datacloudmail.ru/oauth-get/
2025/01/28 02:22:47 DEBUG : file2: Server returned full content instead of range
2025/01/28 02:22:47 DEBUG : [rclone-test-qupolaq2sumi]: Unlock file server: locks 0, url https://cloclo62.datacloudmail.ru/oauth-get/
2025/01/28 02:22:47 DEBUG : [rclone-test-qupolaq2sumi]: Lock file server:   locks 1, url https://cloclo62.datacloudmail.ru/oauth-get/
2025/01/28 02:22:48 DEBUG : [rclone-test-qupolaq2sumi]: Unlock file server: locks 0, url https://cloclo62.datacloudmail.ru/oauth-get/
2025/01/28 02:22:48 DEBUG : [rclone-test-qupolaq2sumi]: Lock file server:   locks 1, url https://cloclo62.datacloudmail.ru/oauth-get/
2025/01/28 02:22:48 DEBUG : [rclone-test-qupolaq2sumi]: Unlock file server: locks 0, url https://cloclo62.datacloudmail.ru/oauth-get/
--- PASS: TestCat (2.44s)
=== RUN   TestPurge
2025/01/28 02:22:48 DEBUG : Creating backend with remote "TestMailru:rclone-test-xutatuf9tege"
2025/01/28 02:22:48 DEBUG : Using config file from "/home/rclone/.rclone.conf"
2025/01/28 02:22:48 DEBUG : Creating backend with remote "/tmp/rclone3415535578"
    run.go:180: Remote "[rclone-test-xutatuf9tege]", Local "Local file system at /tmp/rclone3415535578", Modify Window "1s"
2025/01/28 02:22:48 DEBUG : [rclone-test-xutatuf9tege]: new meta server: https://cld-extapi.datacloudmail.ru/meta/
2025/01/28 02:22:49 DEBUG : [rclone-test-xutatuf9tege]: mkDirs by part "/rclone-test-xutatuf9tege/A1/B1/C1"
2025/01/28 02:22:49 INFO  : A2: Making directory
2025/01/28 02:22:49 INFO  : A1/B2: Making directory
2025/01/28 02:22:49 INFO  : A1/B2/C2: Making directory
2025/01/28 02:22:49 INFO  : A1/B1/C3: Making directory
2025/01/28 02:22:50 INFO  : A3: Making directory
2025/01/28 02:22:50 INFO  : A3/B3: Making directory
2025/01/28 02:22:50 INFO  : A3/B3/C4: Making directory
2025/01/28 02:22:53 ERROR : : error listing: directory not found
2025/01/28 02:22:53 DEBUG : [rclone-test-xutatuf9tege]: Purge remote
2025/01/28 02:22:53 NOTICE: purge failed: purge failed: object not found
--- PASS: TestPurge (4.55s)
=== RUN   TestRmdirsNoLeaveRoot
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
2025/01/28 02:22:53 DEBUG : [rclone-test-qupolaq2sumi]: mkDirs by part "/rclone-test-qupolaq2sumi/A1/B1/C1"
2025/01/28 02:22:53 INFO  : A2: Making directory
2025/01/28 02:22:53 INFO  : A1/B2: Making directory
2025/01/28 02:22:54 INFO  : A1/B2/C2: Making directory
2025/01/28 02:22:54 INFO  : A1/B1/C3: Making directory
2025/01/28 02:22:54 INFO  : A3: Making directory
2025/01/28 02:22:54 INFO  : A3/B3: Making directory
2025/01/28 02:22:54 INFO  : A3/B3/C4: Making directory
2025/01/28 02:22:56 DEBUG : removing 1 level 3 directories
2025/01/28 02:22:56 INFO  : A3/B3/C4: Removing directory
2025/01/28 02:22:58 DEBUG : removing 2 level 3 directories
2025/01/28 02:22:58 INFO  : A1/B2/C2: Removing directory
2025/01/28 02:22:58 INFO  : A1/B1/C3: Removing directory
2025/01/28 02:22:58 DEBUG : removing 2 level 2 directories
2025/01/28 02:22:58 INFO  : A3/B3: Removing directory
2025/01/28 02:22:58 INFO  : A1/B2: Removing directory
2025/01/28 02:22:59 DEBUG : removing 2 level 1 directories
2025/01/28 02:22:59 INFO  : A3: Removing directory
2025/01/28 02:22:59 INFO  : A2: Removing directory
2025/01/28 02:23:00 DEBUG : removing 1 level 3 directories
2025/01/28 02:23:00 INFO  : A1/B1/C1: Removing directory
2025/01/28 02:23:01 DEBUG : removing 1 level 2 directories
2025/01/28 02:23:01 INFO  : A1/B1: Removing directory
2025/01/28 02:23:01 DEBUG : removing 1 level 1 directories
2025/01/28 02:23:01 INFO  : A1: Removing directory
2025/01/28 02:23:01 DEBUG : removing 1 level 0 directories
2025/01/28 02:23:01 INFO  : [rclone-test-qupolaq2sumi]: Removing directory
2025/01/28 02:23:01 ERROR : : error listing: directory not found
2025/01/28 02:23:01 ERROR : : error listing: directory not found
--- PASS: TestRmdirsNoLeaveRoot (8.71s)
=== RUN   TestRmdirsLeaveRoot
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
2025/01/28 02:23:01 INFO  : A1: Making directory
2025/01/28 02:23:02 INFO  : A1/B1: Making directory
2025/01/28 02:23:02 INFO  : A1/B1/C1: Making directory
2025/01/28 02:23:02 DEBUG : removing 1 level 3 directories
2025/01/28 02:23:02 INFO  : A1/B1/C1: Removing directory
2025/01/28 02:23:03 DEBUG : removing 1 level 2 directories
2025/01/28 02:23:03 INFO  : A1/B1: Removing directory
--- PASS: TestRmdirsLeaveRoot (2.50s)
=== RUN   TestRmdirsWithFilter
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
2025/01/28 02:23:04 INFO  : A1: Making directory
2025/01/28 02:23:04 INFO  : A1/B1: Making directory
2025/01/28 02:23:04 INFO  : A1/B1/C1: Making directory
2025/01/28 02:23:05 DEBUG : removing 1 level 3 directories
2025/01/28 02:23:05 INFO  : A1/B1/C1: Removing directory
2025/01/28 02:23:05 DEBUG : removing 1 level 2 directories
2025/01/28 02:23:05 INFO  : A1/B1: Removing directory
--- PASS: TestRmdirsWithFilter (2.36s)
=== RUN   TestCopyURL
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
2025/01/28 02:23:07 DEBUG : filename.txt: File name found in url
2025/01/28 02:23:07 DEBUG : headerfilename.txt: filename found in Content-Disposition header.
--- PASS: TestCopyURL (2.30s)
=== RUN   TestCopyURLToWriter
--- PASS: TestCopyURLToWriter (0.00s)
=== RUN   TestMoveFile
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
2025/01/28 02:23:09 DEBUG : file1: Need to transfer - File not found at Destination
2025/01/28 02:23:09 DEBUG : file1: mailru = 66696c653120636f6e74656e7473000000000000 OK
2025/01/28 02:23:09 INFO  : file1: Copied (new) to: sub/file2
2025/01/28 02:23:09 INFO  : file1: Deleted
2025/01/28 02:23:09 DEBUG : file1: Size and modification time the same (differ by -499.999999ms, within tolerance 1s)
2025/01/28 02:23:09 DEBUG : file1: Unchanged skipping
2025/01/28 02:23:09 INFO  : file1: Deleted
2025/01/28 02:23:09 DEBUG : [rclone-test-qupolaq2sumi]: don't need to copy/move sub/file2, it is already at target location
--- PASS: TestMoveFile (1.72s)
=== RUN   TestMoveFileWithIgnoreExisting
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
2025/01/28 02:23:10 DEBUG : file1: Need to transfer - File not found at Destination
2025/01/28 02:23:11 DEBUG : file1: mailru = 66696c653120636f6e74656e7473000000000000 OK
2025/01/28 02:23:11 INFO  : file1: Copied (new)
2025/01/28 02:23:11 INFO  : file1: Deleted
2025/01/28 02:23:11 DEBUG : file1: Destination exists, skipping
2025/01/28 02:23:11 DEBUG : file1: Not removing source file as destination file exists and --ignore-existing is set
--- PASS: TestMoveFileWithIgnoreExisting (1.04s)
=== RUN   TestCaseInsensitiveMoveFile
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
2025/01/28 02:23:11 DEBUG : file1: Need to transfer - File not found at Destination
2025/01/28 02:23:12 DEBUG : file1: mailru = 66696c653120636f6e74656e7473000000000000 OK
2025/01/28 02:23:12 INFO  : file1: Copied (new) to: sub/file2
2025/01/28 02:23:12 INFO  : file1: Deleted
2025/01/28 02:23:12 DEBUG : file1: Size and modification time the same (differ by -499.999999ms, within tolerance 1s)
2025/01/28 02:23:12 DEBUG : file1: Unchanged skipping
2025/01/28 02:23:12 INFO  : file1: Deleted
2025/01/28 02:23:13 DEBUG : sub/file2: moving to sub/File2-rclone-move-xuteyux6
2025/01/28 02:23:13 INFO  : sub/file2: Moved (server-side) to: sub/File2-rclone-move-xuteyux6
2025/01/28 02:23:13 DEBUG : sub/file2: moving to sub/File2
2025/01/28 02:23:13 INFO  : sub/File2-rclone-move-xuteyux6: Moved (server-side) to: sub/File2
--- PASS: TestCaseInsensitiveMoveFile (2.64s)
=== RUN   TestCaseInsensitiveMoveFileDryRun
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
2025/01/28 02:23:14 NOTICE: hello: Skipped rename to HELLO as --dry-run is set
--- PASS: TestCaseInsensitiveMoveFileDryRun (0.93s)
=== RUN   TestMoveFileBackupDir
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
2025/01/28 02:23:15 DEBUG : Creating backend with remote "TestMailru:rclone-test-qupolaq2sumi/backup"
2025/01/28 02:23:15 DEBUG : Config file has changed externally - reloading
2025/01/28 02:23:15 DEBUG : dst/file1: Sizes differ (src 14 vs dst 18)
2025/01/28 02:23:16 DEBUG : [rclone-test-qupolaq2sumi/backup]: new meta server: https://cld-extapi.datacloudmail.ru/meta/
2025/01/28 02:23:16 DEBUG : [rclone-test-qupolaq2sumi/backup]: mkDirs by part "/rclone-test-qupolaq2sumi/backup/dst"
2025/01/28 02:23:16 INFO  : dst/file1: Moved (server-side)
2025/01/28 02:23:17 DEBUG : dst/file1: mailru = 66696c653120636f6e74656e7473000000000000 OK
2025/01/28 02:23:17 INFO  : dst/file1: Copied (new)
2025/01/28 02:23:17 INFO  : dst/file1: Deleted
--- PASS: TestMoveFileBackupDir (3.46s)
=== RUN   TestSameConfig
--- PASS: TestSameConfig (0.00s)
=== RUN   TestSame
--- PASS: TestSame (0.00s)
=== RUN   TestOverlappingFilterCheckWithoutFilter
--- PASS: TestOverlappingFilterCheckWithoutFilter (0.00s)
=== RUN   TestOverlappingFilterCheckWithFilter
--- PASS: TestOverlappingFilterCheckWithFilter (0.00s)
=== RUN   TestListFormat
--- PASS: TestListFormat (0.00s)
=== RUN   TestDirMove
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
2025/01/28 02:23:19 INFO  : A1/B2: Making directory
2025/01/28 02:23:20 INFO  : A1/B1/C3: Making directory
2025/01/28 02:23:24 INFO  : A2/B1/three: Moved (server-side) to: A3/B1/three
2025/01/28 02:23:24 INFO  : A2/B1/C2/five: Moved (server-side) to: A3/B1/C2/five
2025/01/28 02:23:24 INFO  : A2/one: Moved (server-side) to: A3/one
2025/01/28 02:23:25 INFO  : A2/two: Moved (server-side) to: A3/two
2025/01/28 02:23:25 INFO  : A2/B1/C1/four: Moved (server-side) to: A3/B1/C1/four
2025/01/28 02:23:27 INFO  : [rclone-test-qupolaq2sumi]: Can't DirMove - falling back to file moves: can't move directory - incompatible remotes
2025/01/28 02:23:29 INFO  : A3/B1/three: Moved (server-side) to: A4/B1/three
2025/01/28 02:23:30 INFO  : A3/B1/C1/four: Moved (server-side) to: A4/B1/C1/four
2025/01/28 02:23:30 INFO  : A3/one: Moved (server-side) to: A4/one
2025/01/28 02:23:30 INFO  : A3/B1/C2/five: Moved (server-side) to: A4/B1/C2/five
2025/01/28 02:23:30 INFO  : A3/two: Moved (server-side) to: A4/two
--- PASS: TestDirMove (16.05s)
=== RUN   TestGetFsInfo
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
--- PASS: TestGetFsInfo (0.21s)
=== RUN   TestRcat
=== RUN   TestRcat/withChecksum=false,ignoreChecksum=false
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
2025/01/28 02:23:35 DEBUG : [rclone-test-qupolaq2sumi]: File to upload is small (34 bytes), uploading instead of streaming
2025/01/28 02:23:35 DEBUG : no_checksum_small_file_from_pipe: File has been put by hash from source
2025/01/28 02:23:35 DEBUG : no_checksum_small_file_from_pipe: mailru = 38097cd367f8e5983df551a24266bcdbadf53210 OK
2025/01/28 02:23:35 DEBUG : no_checksum_small_file_from_pipe: Size and mailru of src and dst objects identical
2025/01/28 02:23:35 DEBUG : [rclone-test-qupolaq2sumi]: Target remote doesn't support streaming uploads, creating temporary local FS to spool file
2025/01/28 02:23:35 DEBUG : no_checksum_big_file_from_pipe: File has been put by hash from source
2025/01/28 02:23:35 DEBUG : no_checksum_big_file_from_pipe: mailru = 8fc4b6e5cdaf7a0152d561fbd852938c66d3e964 OK
2025/01/28 02:23:35 DEBUG : no_checksum_big_file_from_pipe: Size and mailru of src and dst objects identical
=== RUN   TestRcat/withChecksum=true,ignoreChecksum=false
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
2025/01/28 02:23:36 DEBUG : [rclone-test-qupolaq2sumi]: File to upload is small (34 bytes), uploading instead of streaming
2025/01/28 02:23:36 DEBUG : with_checksum_small_file_from_pipe: File has been put by hash from source
2025/01/28 02:23:36 DEBUG : with_checksum_small_file_from_pipe: mailru = 38097cd367f8e5983df551a24266bcdbadf53210 OK
2025/01/28 02:23:36 DEBUG : with_checksum_small_file_from_pipe: Size and mailru of src and dst objects identical
2025/01/28 02:23:36 DEBUG : [rclone-test-qupolaq2sumi]: Target remote doesn't support streaming uploads, creating temporary local FS to spool file
2025/01/28 02:23:36 DEBUG : with_checksum_big_file_from_pipe: File has been put by hash from source
2025/01/28 02:23:37 DEBUG : with_checksum_big_file_from_pipe: mailru = 8fc4b6e5cdaf7a0152d561fbd852938c66d3e964 OK
2025/01/28 02:23:37 DEBUG : with_checksum_big_file_from_pipe: Size and mailru of src and dst objects identical
=== RUN   TestRcat/withChecksum=false,ignoreChecksum=true
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
2025/01/28 02:23:37 DEBUG : [rclone-test-qupolaq2sumi]: File to upload is small (34 bytes), uploading instead of streaming
2025/01/28 02:23:38 DEBUG : ignore_checksum_small_file_from_pipe: Size and modification time the same (differ by -499.999999ms, within tolerance 1s)
2025/01/28 02:23:38 DEBUG : [rclone-test-qupolaq2sumi]: Target remote doesn't support streaming uploads, creating temporary local FS to spool file
2025/01/28 02:23:38 DEBUG : ignore_checksum_big_file_from_pipe: Size and modification time the same (differ by -123.456789ms, within tolerance 1s)
=== RUN   TestRcat/withChecksum=true,ignoreChecksum=true
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
2025/01/28 02:23:39 DEBUG : [rclone-test-qupolaq2sumi]: File to upload is small (34 bytes), uploading instead of streaming
2025/01/28 02:23:39 DEBUG : ignore_checksum_small_file_from_pipe: Src hash empty - aborting Dst hash check
2025/01/28 02:23:39 DEBUG : ignore_checksum_small_file_from_pipe: Size of src and dst objects identical
2025/01/28 02:23:39 DEBUG : [rclone-test-qupolaq2sumi]: Target remote doesn't support streaming uploads, creating temporary local FS to spool file
2025/01/28 02:23:40 DEBUG : ignore_checksum_big_file_from_pipe: Src hash empty - aborting Dst hash check
2025/01/28 02:23:40 DEBUG : ignore_checksum_big_file_from_pipe: Size of src and dst objects identical
--- PASS: TestRcat (5.52s)
    --- PASS: TestRcat/withChecksum=false,ignoreChecksum=false (1.26s)
    --- PASS: TestRcat/withChecksum=true,ignoreChecksum=false (1.21s)
    --- PASS: TestRcat/withChecksum=false,ignoreChecksum=true (1.53s)
    --- PASS: TestRcat/withChecksum=true,ignoreChecksum=true (1.52s)
=== RUN   TestRcatMetadata
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
    operations_test.go:1532: Skipping as destination doesn't support user metadata
--- SKIP: TestRcatMetadata (0.19s)
=== RUN   TestRcatSize
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
2025/01/28 02:23:41 DEBUG : [rclone-test-qupolaq2sumi]: File to upload is small (60 bytes), uploading instead of streaming
2025/01/28 02:23:41 DEBUG : potato2: File has been put by hash from source
2025/01/28 02:23:41 DEBUG : potato2: mailru = bd261602de5fe00b7f413ca31a48857417d86654 OK
2025/01/28 02:23:41 DEBUG : potato2: Size and mailru of src and dst objects identical
--- PASS: TestRcatSize (1.24s)
=== RUN   TestRcatSizeMetadata
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
    operations_test.go:1613: Skipping as destination doesn't support user metadata
--- SKIP: TestRcatSizeMetadata (0.22s)
=== RUN   TestTouchDir
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
2025/01/28 02:23:42 DEBUG : potato2: File has been put by hash from source
2025/01/28 02:23:43 DEBUG : [rclone-test-qupolaq2sumi]: Touching "empty space"
2025/01/28 02:23:43 DEBUG : [rclone-test-qupolaq2sumi]: Touching "potato2"
2025/01/28 02:23:43 DEBUG : [rclone-test-qupolaq2sumi]: Touching "sub dir/potato3"
--- PASS: TestTouchDir (2.29s)
=== RUN   TestMkdirMetadata
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
    operations_test.go:1703: Skipping test as remote does not support MkdirMetadata
--- SKIP: TestMkdirMetadata (0.20s)
=== RUN   TestMkdirModTime
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
    operations_test.go:1722: Skipping test as remote does not support DirSetModTime or MkdirMetadata
--- SKIP: TestMkdirModTime (0.24s)
=== RUN   TestCopyDirMetadata
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
    operations_test.go:1743: Skipping test as remote does not support WriteDirMetadata or MkdirMetadata
--- SKIP: TestCopyDirMetadata (0.18s)
=== RUN   TestSetDirModTime
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
    operations_test.go:1779: Skipping test as remote does not support DirSetModTime or WriteDirSetModTime
--- SKIP: TestSetDirModTime (0.21s)
=== RUN   TestDirsEqual
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
    operations_test.go:1823: Skipping test as remote does not support WriteDirMetadata or MkdirMetadata
--- SKIP: TestDirsEqual (0.21s)
=== RUN   TestRemoveExisting
    run.go:180: Remote "[rclone-test-qupolaq2sumi]", Local "Local file system at /tmp/rclone855981153", Modify Window "1s"
2025/01/28 02:23:45 DEBUG : sub dir/test remove existing with long name 123456789012345678901234567890123456789012345678901234567890123456789: File has been put by hash from source
2025/01/28 02:23:46 DEBUG : sub dir/test remove existing: TEST: renaming existing object to "sub dir/test remove existing.suvasap3" before starting
2025/01/28 02:23:47 DEBUG : sub dir/test remove existing.suvasap3: TEST: removing renamed existing file after operation
2025/01/28 02:23:47 DEBUG : sub dir/test remove existing with long name 123456789012345678901234567890123456789012345678901234567890123456789: TEST: renaming existing object to "sub dir/test remove existing with long name 123456789012345678901234567890123456789012345678901234567890.ziseveg6" before starting
2025/01/28 02:23:48 DEBUG : sub dir/test remove existing with long name 123456789012345678901234567890123456789012345678901234567890.ziseveg6: TEST: renaming existing back after failed operation
2025/01/28 02:23:48 DEBUG : sub dir/test remove existing with long name 123456789012345678901234567890123456789012345678901234567890123456789: TEST: renaming existing object to "sub dir/test remove existing with long name 123456789012345678901234567890123456789012345678901234567890.jadupir6" before starting
2025/01/28 02:23:49 DEBUG : sub dir/test remove existing with long name 123456789012345678901234567890123456789012345678901234567890.jadupir6: TEST: removing renamed existing file after operation
--- PASS: TestRemoveExisting (4.72s)
=== RUN   TestRcAbout
    rc_test.go:30: Skipping test on non local remote
--- SKIP: TestRcAbout (0.00s)
=== RUN   TestRcCleanup
    rc_test.go:30: Skipping test on non local remote
--- SKIP: TestRcCleanup (0.00s)
=== RUN   TestRcCopyfile
    rc_test.go:30: Skipping test on non local remote
--- SKIP: TestRcCopyfile (0.00s)
=== RUN   TestRcCopyurl
    rc_test.go:30: Skipping test on non local remote
--- SKIP: TestRcCopyurl (0.00s)
=== RUN   TestRcDelete
    rc_test.go:30: Skipping test on non local remote
--- SKIP: TestRcDelete (0.00s)
=== RUN   TestRcDeletefile
    rc_test.go:30: Skipping test on non local remote
--- SKIP: TestRcDeletefile (0.00s)
=== RUN   TestRcList
    rc_test.go:30: Skipping test on non local remote
--- SKIP: TestRcList (0.00s)
=== RUN   TestRcStat
    rc_test.go:30: Skipping test on non local remote
--- SKIP: TestRcStat (0.00s)
=== RUN   TestRcSetTier
    rc_test.go:30: Skipping test on non local remote
--- SKIP: TestRcSetTier (0.00s)
=== RUN   TestRcSetTierFile
    rc_test.go:30: Skipping test on non local remote
--- SKIP: TestRcSetTierFile (0.00s)
=== RUN   TestRcMkdir
    rc_test.go:30: Skipping test on non local remote
--- SKIP: TestRcMkdir (0.00s)
=== RUN   TestRcMovefile
    rc_test.go:30: Skipping test on non local remote
--- SKIP: TestRcMovefile (0.00s)
=== RUN   TestRcPurge
    rc_test.go:30: Skipping test on non local remote
--- SKIP: TestRcPurge (0.00s)
=== RUN   TestRcRmdir
    rc_test.go:30: Skipping test on non local remote
--- SKIP: TestRcRmdir (0.00s)
=== RUN   TestRcRmdirs
    rc_test.go:30: Skipping test on non local remote
--- SKIP: TestRcRmdirs (0.00s)
=== RUN   TestRcSize
    rc_test.go:30: Skipping test on non local remote
--- SKIP: TestRcSize (0.00s)
=== RUN   TestRcPublicLink
    rc_test.go:30: Skipping test on non local remote
--- SKIP: TestRcPublicLink (0.00s)
=== RUN   TestRcFsInfo
    rc_test.go:30: Skipping test on non local remote
--- SKIP: TestRcFsInfo (0.00s)
=== RUN   TestUploadFile
    rc_test.go:30: Skipping test on non local remote
--- SKIP: TestUploadFile (0.00s)
=== RUN   TestRcCommand
    rc_test.go:30: Skipping test on non local remote
--- SKIP: TestRcCommand (0.00s)
=== RUN   TestRcDu
    rc_test.go:30: Skipping test on non local remote
--- SKIP: TestRcDu (0.00s)
=== RUN   TestRcCheck
    rc_test.go:30: Skipping test on non local remote
--- SKIP: TestRcCheck (0.00s)
=== RUN   TestRcHashsum
    rc_test.go:30: Skipping test on non local remote
--- SKIP: TestRcHashsum (0.00s)
=== RUN   TestRcHashsumFile
    rc_test.go:30: Skipping test on non local remote
--- SKIP: TestRcHashsumFile (0.00s)
FAIL
2025/01/28 02:23:50 DEBUG : [rclone-test-qupolaq2sumi]: Purge remote
"./operations.test -test.v -test.timeout 1h0m0s -remote TestMailru: -verbose" - Finished OK in 2m28.445645794s (try 1/5)